Nanosized temperature-responsive Fe3O4-UA-g-P(UA-co-NIPAAm) magnetomicelles for controlled drug release

This paper demonstrated the preparation of temperature-responsive magnetomicelles that consist of a functionalized hexagonal magnetic core, Fe₃O₄-undecylenic acid (Fe₃O₄-UA), and an amphiphilic surface layer of temperature-responsive polymer. The functionalized magnetic Fe₃O₄-UA core was prepared by a suspension-oxidation reaction in an aqueous solution, during which the formation of the Fe₃O₄ and coordination of UA to the Fe₃O₄ occurred simultaneously. Amphiphilic poly(undecylenic acid-co-N-isopropylacrylamide) (P(UA-co-NIPAAm)) was grafted to the Fe₃O₄-UA core as a temperature-responsive micellar surface layer to prepare well dispersed Fe₃O₄-UA-g-P(UA-co-NIPAAm) magnetomicelles with the size of around 8 nm in water. The application of resulted nanosized Fe₃O₄-UA-g-P(UA-co-NIPAAm) magnetomicelles in controlled drug delivery was further investigated and it was found that resulting magnetomicelles exhibited good potential for temperature triggered controlled drug release.     

Preparation and formation mechanism of three-dimensionally ordered macroporous (3DOM) MgO, MgSO4, CaCO3, and SrCO3, and photonic stop band properties of 3DOM CaCO3

Three-dimensionally ordered macroporous (3DOM) magnesium (Mg) oxide (MgO), MgSO₄, calcium (Ca) carbonate (CaCO₃), and strontium (Sr) carbonate (SrCO₃) were prepared using a colloidal crystal of polymer spheres as a template. Ethanol or ethanol-water solution of metal salts (acetate or nitrate) and citric acid was infiltrated into the void of the colloidal crystal template of a monodispersed poly(methyl methacrylate) (PMMA) sphere. Heating of this PMMA-metal salt-citric acid composite produced the desired well-ordered 3DOM materials with a high pore fraction, which was confirmed by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and ultraviolet-visible (UV-vis) diffuse reflectance spectra. The presence of citric acid is crucial for production of the 3DOM structures. Reaction of citric acid with metal salt produces metal citrate solid in the void of PMMA spheres, which is necessary to maintain the 3DOM structure during the calcination process. 3DOM CaCO₃ shows opalescent colors because of it's photonic stop band properties.     

A new organically templated gallium(III)-doped chromium(III) fluorophosphite, (C2H10N2)[Ga0.98Cr0.02(HPO3)F3] hydrothermal synthesis, crystal structure and spectroscopic properties

A new organically templated fluoro-phosphite gallium(III)-doped chromium(III) with formula (C₂H₁₀N₂)[Ga_0.98Cr_0.02(HPO₃)F₃] has been synthesized by using mild hydrothermal conditions under autogeneous pressure. The crystal structure has been solved from X-ray single-crystal data. The compound crystallizes in the P2₁2₁2₁ orthorhombic space group, with the unit-cell parameters a=12.9417(7) Å, b=9.4027(6) Å, c=6.3502(4) Å and Z=4. The final R factors were R1=0.022 (all data) and wR2=0.050. The crystal structure consists of [Ga_0.98Cr_0.02(HPO₃)F₃]²⁻ anionic chains extended along the c-axis, with the ethylenediammonium cations placed in the cavities of the structure delimited by three different chains. The IR and Raman spectra show the characteristic bands of the phosphite oxoanion. The diffuse reflectance spectroscopy allowed us to calculate the Dq and Racah parameters of the Cr(III) cations in octahedral environment. The values are Dq=1375 cm⁻¹, B=780 cm⁻¹ and C=3420 cm⁻¹. The polycrystalline ESR spectra performed at X and Q-bands show the signals belonging to the diluted Cr(III) cation in this phase. From the fit of the X-band ESR spectrum at 4.2 K, the calculated values of the axial (D) and rhombic (E) distortion parameters are 0.075 and 0.042 cm⁻¹, respectively, the components of the g-tensor being g_x=1.98, g_y=1.99 and g_z=1.90.     

A facile two-step modifying process for preparation of poly(SStNa)-grafted Fe3O4/SiO2 particles

This article reports the synthesis of the poly(sodium 4-styrenesulfonate)-grafted Fe₃O₄/SiO₂ particles via two steps. The first step involved magnetite nanoparticles (Fe₃O₄) homogeneously incorporated into silica spheres using the modified Stöber method. Second, the modified silica-coated Fe₃O₄ nanoparticles were covered with the outer shell of anionic polyelectrolyte by surface-initiated atom transfer radical polymerization. The resulted composites were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), energy dispersive microscopy (EDS), Fourier transform-infrared (FT-IR), thermogravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS) and vibration sample magnetometer (VSM). The XRD results indicated that the surface modified Fe₃O₄ nanoparticles did not lead to phase change compared with the pure Fe₃O₄. TEM studies revealed nanoparticles remained monodisperse. The detection of sulfur and sodium signals was a convincing evidence that sodium 4-styrenesulfonate was grafted onto the surface of the magnetic silica in XPS analysis. Finally, super-paramagnetic properties of the composite particles, and the ease of modifying the surfaces may make the composites of important use in mild separation, enzyme immobilization, etc.     

Synthesis and characterization of a new layered gallium phosphate [Co(en)3][Ga3(H2PO4)6(HPO4)3] templated by cobalt complex

A new layered gallium phosphate [Co(en)₃][Ga₃(H₂PO₄)₆(HPO₄)₃], denoted as GaPO-CJ14, has been synthesized solvothermally by using a racemic mix of chiral metal complex Co(en)₃Cl₃ as a template. Its structure was determined by single-crystal X-ray diffraction analysis and further characterized by X-ray powder diffraction, ICP, and TG analyses. The compound crystallizes in the monoclinic space group P2₁/m (No. 11) with a=9.2103(3), b=22.0936(8), c=9.5458(4) Å, β=108.278(2)°, Z=2, R₁=0.0497 and wR₂=0.1122 for all data. The inorganic layer is built up by alternation of Ga-centered octahedra (GaO₆) and P-centered tetrahedra (PO₃(OH), PO₂(OH)₂ , PO₂(O)(OH) and PO(O)(OH)₂) forming a 4.12-net. The sheet structure is featured by a series of structural units composed of two centrosymmetrically related [3.3.3] propellane-like chiral motifs. The metal complex cations locate in the interlayer region and interact with the host network through H-bonds.     

Preparation and characterization of poly(N-isopropylacrylamide)-modified poly(2-hydroxyethyl acrylate) hydrogels by interpenetrating polymer networks for sustained drug release

In order to investigate the influence of hydrophobic moieties formed by poly(N-isopropylacrylamide) (PNIPAm) in a hydrogel matrix on the release behavior of the hydrogel, a series of poly(N-isopropylacrylamide) (PNIPAm)-modified poly(2-hydroxyethyl acrylate-co-2-hydroxyethyl 2-hydroxyethyl methacrylate) (P(HEA-co-HEMA)) via interpenetrating polymer networks (IPNs) were prepared by a sequential UV solution polymerization. Interestingly, it was found that P(HEA-co-HEMA)/PNIPAm IPN indicated a single glass transition temperature (T(g)) and the T(g)s of the IPNs increased with an increase in the PNIPAm component. This phenomenon may be attributed to hydrogen bonding between the two polymer networks, but the hydrogen bonding exerts less influence on the swelling behavior of the IPNs, due to the fact that IPNs can respond to changes in temperature like PNIPAm. Using 2-[(diphenylmethyl)sulphiny]acetamide (modafinil, MOD) and p-hydroxybenzoic acid (HBA) as model drug compounds, the release behavior of the IPNs was studied at body temperature, and it was found that the presence of PNIPAm could retard drug release regardless of the solubility of the drugs. Release profiles of HBA from the IPNs and their component samples as a function of time at 37 degrees C.     

Controlled loading and release of methylene blue from LbL polyurethane/poly(acrylic acid) film

The layer‐by‐layer (LbL) assembled multilayer films are widely used in the biomedical field for the controlled drug delivery. Here, multilayer films were assembled by LbL technique through alternating deposition of cationic polyurethane (PU) and poly(acrylic acid) (PAA) on glass slides. Methylene blue (MB) was used as a model drug to investigate the loading and release ability of the prepared multilayer film. The results showed that the loading rate and loading amount of MB were greatly influenced by pH value of the dye solution, and the release rate of MB was controlled both by ionic strength and pH value of immersing solution. The result also indicated that the film had a good reversibility of drug loading and release. It suggested that the PU/PAA multilayer film had potential applications in drug delivery and controlled release. Copyright © 2011 John Wiley & Sons, Ltd.     

Controlled drug release behavior of metformin hydrogen chloride from biodegradable films based on chitosan/poly(ethylene glycol) methyl ether blend

In this study, novel smart drug release films were prepared by blending chitosan with polyethylene glycol methyl ether (PEGME), also named as methoxy polyethylene glycol (mPEG), for controlled drug release applications. The polymeric films were characterized by Fourier transform infra-red for functional groups analysis, scanning electron microscopy for morphology and X-ray photoelectron spectroscopy for chemical and surface analysis followed by mechanical and thermal analysis. The mechanical properties showed that with the addition of PEGME (40%), the tensile strength and elongation break were increased up to 34.14 MPa and 26.40%, respectively as compared to the controlled sample (without PEGME). The developed biodegradable films were tested for Metformin hydrogen chloride release ability at a particular rate in phosphate buffer saline solution at pH 7.4. The results showed that chitosan/PEGME blends could be employed for controlled drug release and other biomedical applications.     

Hydrothermal synthesis and structural characterization of two organically templated zincophosphites with three-dimensional frameworks, (C6H14N2)·[Zn3(HPO3)4] and (C4H12N2)·[Zn3(HPO3)4]

Two organically templated zincophosphites, (C₆H₁₄N₂)·[Zn₃(HPO₃)₄] and (C₄H₁₄N₂)·[Zn₃(HPO₃)₄] have been prepared under hydrothermal conditions and characterized by single-crystal X-ray diffraction. (C₆H₁₄N₂)·[Zn₃(HPO₃)₄] crystallizes in the triclinic space group , with cell parameters, a=9.363(4) Å, b=10.051(4) Å, c=10.051(4) Å, α=85.777(13)°, β=82.091(9)°, and γ=79.783(9)°. (C₄H₁₄N₂)·[Zn₃(HPO₃)₄] crystallizes in the monoclinic space group P2₁/c, with cell parameters, a=9.9512(3) Å, b=10.1508(3) Å, c=17.8105(5) Å, and β=95.6510(10)°. Although the two structures are different, they have the same anionic framework compositions of [Zn₃(HPO₃)₄]²⁻. Their frameworks are built up from strictly alternating ZnO₄ tetrahedra and HPO₃ pseudo pyramids by sharing vertexes. There exist channels with an eight-membered ring window along the a- and c-axis. Powder X-ray diffraction, IR spectroscopy, ³¹P MAS solid-state NMR, thermogravimetric and differential thermal analyses were also carried out.     

Preparation and characterization of the nanoporous ultrathin multilayer films based on molybdenum polyoxometalate (Mo38)n

Ultrathin multilayer films of the wheel-shaped molybdenum polyoxometalate cluster (Mo₃₈)_n and poly(allylamine hydrochloride)(PAH) have been prepared by the layer-by-layer (LbL) self-assembly method. The ((Mo₃₈)_n/PAH)_m multilayer films have been characterized by X-ray photoelectron spectra (XPS) and atomic force microscopy (AFM). UV-VIS measurements reveal regular film growth with each (Mo₃₈)_n adsorption. The electrochemistry behavior of the film at room temperature was investigated.     

Preparation and drug release property of CO2 stimulus-sensitive poly(N, N-dimethylaminoethyl methacrylate)-b-polystyrene nanoparticles

The CO₂ stimulus-sensitive nanoparticles based on poly(N, N-dimethylaminoethyl methacrylate)-b-poly styrene (PDMAEMA-b-PS) were prepared via surfactant-free miniemulsion reversible addition–fragmentation chain transfer (RAFT) polymerization. The as-prepared nanoparticles exhibited core–shell structure with about 120 nm in diameter. Their dispersion/aggregation in water can be adjusted by alternatively bubbling of CO₂ and N₂. Drug release from these nanoparticles can be accelerated (or delayed) by bubbling (or removing) of CO₂.     

(NH3CH2CH2NH3)B6O9(OH)2: Synthesis and crystal structure of a novel layered borate templated by ethylenediamine

A novel intercalated borate compound (NH₃CH₂CH₂NH₃)B₆O₉(OH)₂, has been solvothermally synthesized, and structurally characterized by single crystal X-ray diffraction. Compound crystallizes in the monoclinic, space group P2(1)/c, , , , β=93.32(3)°, , Z=4. Its oxoborate structure is built up from 1-D polyborate chains with 3, 11-membered boron rings bonded diamine molecules through electrostatic attraction and hydrogen bond interactions to construct 2-D layered compound. Other characterizations by IR, element analysis, thermal analysis and specific surface area are also discussed.     

Thermosensitive and control release behavior of poly(N-isopropylacrylamide-co-acrylic acid)/nano-Fe3O4 magnetic composite latex particle that is synthesized by a novel method

In this study, a novel method was used to synthesize the poly(N-isopropylacrylamide-co-acrylic acid)/Fe₃O₄ (poly(NIPAAm-AA)/Fe₃O₄) magnetic composite latex. The crosslinked poly(NIPAAm-AA) polymer latex particles were first synthesized by the method of soapless emulsion polymerization, then Fe²⁺ and Fe³⁺ ions were introduced to bond with the -COOH groups of AA segments in poly(NIPAAm-AA) polymer latex particles. Further by a reaction with NH₄OH, Fe₃O₄ nanoparticles were generated in situ. The concentrations of acrylic acid (AA), crosslinking agent (N,N′-methylene bisacrylamide (MBA)), and Fe₃O₄ nanoparticles were important factors to influence the morphology and lower critical solution temperature (LCST) of poly(NIPAAm-AA)/Fe₃O₄ magnetic composite latex particles. The poly(NIPAAm-AA)/Fe₃O₄ latex particles were used as a thermosensitive drug carrier to load caffeine. The control release of caffeine was studies. Morphology-based schematic models were proposed to explain the control release behavior of the composite particles with different compositions. Moreover, the protein (albumin, acetylated from bovine serum (BSA)) was bound on the surface of poly(NIPAAm-AA)/Fe₃O₄ composite latex particles. The effects of AA, crosslinking agent and Fe₃O₄ contents on the amount of BSA binding were investigated at different temperatures and pH values. The composition-morphology-BSA conjugation relationship was established.     

A linear Cu-Gd-Cu-Gd complex derived from the assembly reaction of [NaCuH3L] and [Gd(thd)3(H2O)2] (H3L = meso-1,2-diphenyl-1-(2-oxybenzamido)-2-(2-oxy-3-ethoxybenzylideneamino)ethane and Hthd = 2,2,6,6-tetra-methyl-3,5-heptanedione)

A linear tetranuclear Cu^II-Gd^III-Cu^II-Gd^III complex [Cu^IIL^dpen(meso)Gd^III(thd)₂(H₂O)]₂ was synthesized from the reaction of [NaCu^IIL^dpen(meso)(DMF)] with [Gd^III(thd)₃(H₂O)₂], and the structures and magnetic properties were investigated, where H₃L^dpen(meso) = meso-1,2-diphenyl-1-(2-hydroxybenzamido)-2-(2-hydroxy-3-ethoxybenzylideneamino)ethane and Hthd = 2,2,6,6-tetramethyl-3,5-heptanedione. The Cu^II complex component [NaCu^IIL^dpen(meso)(DMF)] has a one-dimensional (1D) chain structure, in which the Na⁺ ion is coordinated by two phenoxo and an ethoxy oxygen atoms of a Cu^II complex and an amido oxygen atom of the adjacent Cu^II unit to produce the 1D structure, in which the diphenylethylenediamine moieties have the array of {(1R,2S)-Na-(1S,2R)}_1∞. The assembly reaction of the Cu^II and Gd^III components gave a linear complex with the array of Cu(1)-Gd(1)-Cu(2)-Gd(2), in which two diphenylethylenediamine moieties have the same chirality of (1R,2S)-(1R,2S) or (1S,2R)-(1S,2R). Two linear Cu(1)-Gd(1)-Cu(2)-Gd(2) units are linked by hydrogen bonds through two water molecules to give a cyclic structure with a center of symmetry. The temperature dependence of the magnetic susceptibilities and field-dependent magnetization revealed the ferromagnetic interaction between the Cu^II and Gd^III ions within the linear chain.     

Hydro(solvo)thermal synthesis and structural characterization of a new organically templated gallophosphate: [H3N(CH2)2NH3]1/2·[Ga5 (PO4)4(OH)4]

A new three-dimensional open-framework gallophosphate: [H₃N(CH₂)₂NH₃]_1/2·[Ga₅ (PO₄)₄(OH)₄] has been prepared by hydro(solvo)thermal synthesis in presence of ethylenediamine (en) as structure-directing agent. Its structure was determined by means of single-crystal X-ray diffraction analysis with the following crystal data: monoclinic space group C2/m, a=10.1604(9) Å, b=12.0085(15) Å, c=7.1892(7) Å, β=90.797(6)°, V=877.08(16) Å³, Z=2, R₁=0.0264, wR₂=0.0764. The total numbers of measured reflections and unique reflections were 3508 and 1300, respectively. It is built up from a new secondary building unit (SBU) Ga₄P₄O₂₀(OH)₄, in which Ga atoms exhibit distorted trigonal bipyramidal coordination and P atoms are in tetrahedral coordination. The SBU Ga₄P₄O₂₀(OH)₄ are linked into a layer by bridge oxygen atoms. The GaO₄(OH)₂ octahedra link the layers into a three-dimentional framework. Diprotonated ethylenediamine was found in the channel of the framework. The material was characterized by IR spectroscopy, ¹H NMR spectra, thermogravimetric and differential thermal analyses and elemental analysis.     

The role of polymer/drug interactions on the sustained release from poly(dl-lactic acid) tablets

The release profiles of model drugs (propranolol HCl, diclofenac sodium, salicylic acid and sulfasalazine) from low molecular weight poly(d,l-lactic acid) [d,l-PLA] tablets immersed in buffer solutions were investigated in an attempt to explore the mechanism of the related phenomena. It was confirmed that drug release is controlled by diffusion through the polymer matrix and by the erosion of the polymer. The pH of the surrounding medium influences the drug solubility as well as swelling and degradation rate of the polymer and therefore the overall drug release process. Physicochemical interaction between d,l-PLA and drug is an additional factor which influences the degree of matrix swelling and therefore its porosity and diffusion release process. Propranolol HCl shows extended delivery time at both examined pH values (5.4 and 7.4) and especially at pH 7.4 where release was accomplished in 190 days, most probably due to its decreased solubility at higher pH values. The acidic drugs gave shorter delivery times especially at pH 7.4. A slower drug release rate and more extended delivery time at pH 7.4 in comparison with that at pH 5.4 was recorded for tablets loaded with diclofenac sodium and salicylic acid. The opposite effect was observed with samples loaded with propranolol HCl.     

3-巯基丙酸自组装单层控制碳酸钙晶型及形貌的研究

采用碳酸铵分解产生的NH3和CO2扩散并溶入氯化钙溶液中,得到了碳酸钙晶体。研究结果表明,3-巯基丙酸自组装单层和溶液温度对碳酸钙晶体的晶型和形貌具有重要影响。25℃条件下,纯溶液中得到了方解石,文石和球霰石三种晶型的混合沉淀物,而在自组装单层存在条件下只得到了表面光滑的菱面体方解石。改变温度,自组装单层调控得到的方解石晶体具有不同的形貌。在60℃得到了多孔方解石,与25℃时典型菱面体方解石有重要区别。XRD分析表明自组装膜上所得碳酸钙晶体为沿着(104)和(006)晶面取向生长的方解石。     

Synthesis and structure of organically templated lanthanum sulfate [C4N3H16][La(SO4)3]·H2O

The first organically templated one-dimensional lanthanum sulfate [C₄N₃H₁₆][La(SO₄)₃]·H₂O has been prepared employing hydrothermal methods in the presence of diethylenetriamine (DETA). The structure was determined by single-crystal X-ray diffraction (XRD). The title compound crystallizes in the triclinic system, space group P-1 (No.2) with cell parameters M=551.30, a=8.2773(7) Å, b=9.5660(6) Å, c=10.4363(6) Å, α=105.661(2)°, β=102.849(3)°, γ=104.376(3)°, V=732.72(9) Å³, Z=2, R=0.0285, wR=0.0778. The structure consists of infinite linear chains. The chains are held together by hydrogen bond interactions involving the hydrogens of the amine and the framework oxygens. The as-synthesized product is characterized by powder XRD, inductive couple plasma analysis and thermogravimetric analysis.     

(BiO)2CO3-Bi-TiO2复合纳米纤维制备及其光催化降解抗生素

以静电纺丝制备的TiO₂纳米纤维为基质,葡萄糖为还原剂,在不同的酸碱环境中,采用一步水热法可控合成了异质结型Bi-TiO₂、(BiO)₂CO₃-TiO₂和(BiO)₂CO₃-Bi-TiO₂复合纳米纤维光催化剂。通过X射线粉末衍射(XRD)、X射线光电子能谱(XPS)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、紫外-可见漫反射光谱(UV-Vis DRS)和光致发光光谱(PL)等对样品进行表征。以洛美沙星、环丙沙星和诺氟沙星为目标污染物,研究了TiO₂及其复合纳米纤维的光催化降解性能,并探究其降解反应机理。结果表明,(BiO)₂CO₃-Bi-TiO₂光催化活性最高,模拟太阳光照60 min,对诺氟沙星、洛美沙星和环丙沙星的降解率分别达到93.2%、97.5%和100%。     

Conductivity properties of Na2SO4/CaCO3 catalysts and their effect on catalytic activities for oxidative coupling of methane

A series of Na₂SO₄ doped CaCO₃ catalysts were prepared. It was observed that the C₂ yields and selectivities of Na₂SO₄/CaCO₃ catalysts for OCM are intimately related to their conductivities. The effect of conductivity on the catalytic activity is discussed together with the conductivities and catalytic activities of the catalysts. The higher the conductivities, the higher the C₂ yields and selectivities are.