Nonisothermal crystallization behavior of isotactic polypropylene/ thermoplastic rubber blends

The morphology and crystallization behavior of blends of polypropylene (PP) and an ethylene-based thermoplastic elastomer (TPO) were investigated by scanning electron microscopy (SEM) and differential scanning calorimetry (DSC). The SEM images showed a two-phase morphology for these blends. As TPO was partially crystalline, two distinct peaks were observed in both heating and cooling scans of DSC. The crystallization temperature of TPO in blends was higher than pure TPO. In contrast, the crystallization temperature of PP in blends was lower than pure PP. The crystallization behavior of blends was modeled by Avrami equation. It was observed that the presence of TPO accelerated the growth rate of crystals of PP in PP/TPO blends.     

Nonisothermal crystallization behavior of syndiotactic polystyrene/montmorillonite nanocomposites

X‐ray diffraction methods and differential scanning calorimetry were used to investigate the crystalline structure and crystallization kinetics of syndiotactic polystyrene (sPS)/clay nanocomposites. X‐ray diffraction data showed the presence of polymorphism in sPS/montmorillonite (MMT) nanocomposites, which was strongly dependent on the processing conditions (premelting temperature and cooling rate) of the sPS/MMT nanocomposites and on the content of MMT in the sPS/MMT nanocomposites. The α‐crystalline form could be transformed into β‐crystalline forms at higher premelting temperatures. The nonisothermal melt‐crystallization kinetics and melting behavior of the sPS/MMT nanocomposites were also studied at various cooling rates. The correlation of the crystallization kinetics, melting behavior, and crystalline structure of the sPS/MMT nanocomposites was examined. The results indicated that the addition of a small amount of MMT to sPS caused a change in the mechanism of nucleation and the crystal growth of the sPS crystallite. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 560–570, 2003     

Thermal stability of polypropylene-clay nanocomposites subjected to laser pulse heating

Polypropylene based nanocomposites filled with montmorillonite nanoclay prepared by twin screw extrusion have been studied for thermal stability at high heating rates. In contrast to traditional thermal stability and flammability studies of polymer nanocomposites using heating rates on the order of tens of degrees per minute, this study achieves heating rates that are six orders of magnitude higher. This was accomplished using laser pulse heating. The results show that the nanoclay increases thermal stability of the polymer, as measured by a decrease in the mass loss for a laser pulse at a given energy and intensity. Electron microscopy and various spectroscopic techniques show that a silicate-rich char layer may provide the mechanism for protection of the polymer and decreased degradation rates. The results of the study are compared to the typical results found in traditional thermal stability testing.     

Nonisothermal cold crystallization behavior and kinetics of polylactide/clay nanocomposites

The nonisothermal cold crystallization behavior of intercalated polylactide (PLA)/clay nanocomposites (PLACNs) was studied using differential scanning calorimetry, polarized optical microscope, X‐ray diffractometer, dynamic mechanical thermal analysis, and Fourier transform infrared spectrometer. The results show that both the cold crystallization temperature (T_cc) and melting point (T_m) of PLA matrix decreases monotonously with increasing of clay loadings, accompanied by the decreasing degree of crystallinity (X_c%) at the low heating rates (≤5 °C/min). However, the X_c% of PLACNs presents a remarkable increase at the high heating rate of 10 °C/min in contrast to that of neat PLA. The crystallization kinetics was then analyzed by the Avrami, Jezioney, Ozawa, Mo, Kissinger and Lauritzen–Hoffman kinetic models. It can be concluded that at the low heating rate, the cold crystallization of both the neat PLA and nanocomposites proceeds by regime III kinetics. The nucleation effect of clay promote the crystallization to some extent, while the impeding effect of clay results in the decrease of crystallization rate with increasing of clay loadings. At the high heating rate of 10 °C/min, crystallization proceeds mainly by regime II kinetics. Thus, the formation of much more incomplete crystals in the PLACNs with high clay loadings due to the dominant multiple nucleations mechanism in regime II, may have primary contribution to the lower crystallization kinetics, also as a result to the higher degree of crystallinity and lower melting point in contrast to that of neat PLA. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1100–1113, 2007     

Nonisothermal crystallization kinetics of polypropylene/montmorillonite nanocomposites

The nonisothermal crystallization kinetics of poly(propylene) (PP) and poly(propylene)/organic‐montmorillonite (PP/Mont) nanocomposite were investigated by differential scanning calorimetry (DSC) with various cooling rates. The Avrami analysis modified by previous research was used to describe the nonisothermal crystallization process of PP and PP/Mont nanocomposite very well. The values of half‐time and Z_c showed that the crystallization rate increased with increasing cooling rates for both PP and PP/Mont nanocomposite, but the crystallization rate of PP/Mont nanocomposite was faster than that of PP at a given cooling rate. The activation energies were estimated by the Kissinger method, and the values were 189.4 and 155.7 kJ/mol for PP and PP/Mont nanocomposite, respectively. PP/Mont nanocomposite could be easily fabricated as original PP, although the addition of organomontmorillonite might accelerate the overall nonisothermal crystallization process. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 408–414, 2002; DOI 10.1002/polb.10101     

Nonisothermal melt crystallization and subsequent melting behavior of biodegradable poly(hydroxybutyrate)/multiwalled carbon nanotubes nanocomposites

In this work, nonisothermal melt crystallization and subsequent melting behavior of poly(hydroxybutyrate) (PHB) and its nanocomposites at different multiwalled carbon nanotubes (MWCNTs) loadings were investigated. Increasing the MWCNTs loadings has enhanced the nonisothermal melt crystallization of PHB significantly in the nanocomposites when compared with that of the neat PHB; furthermore, increasing the cooling rates shift the crystallization exotherms to low temperature range for both neat PHB and its nanocomposites. Double melting behavior is found for both neat PHB and its nanocomposites crystallized nonisothermally from the melt, which is explained by the melting, recrystallization, and remelting model. Effects of the MWCNTs loadings, cooling rates, and heating rates on the subsequent melting behavior of PHB were studied in detail. It is found that increasing the MWCNTs loadings, decreasing the cooling rates, and increasing the heating rates would restrict the occurrence of the recrystallization of PHB in the nanocomposites. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 2238–2246, 2009     

Nonisothermal crystallization behavior of poly(m‐xylene adipamide)/montmorillonite nanocomposites

This article reports the nonisothermal crystallization behavior of MXD6 and its clay nanocomposite system (MXD6/MMT) using differential scanning calorimetry (DSC). The DSC experimental data were analyzed by theoretical modeling of the crystallization kinetics using the Avrami, Ozawa, Jeziorny, and the combined Avrami–Ozawa semiempirical models. It has been determined that these models adequately described the crystallization behavior of the MXD6 nanocomposite at cooling rates below 20 °C/min, but there was a deviation from linear dependence at higher cooling rates. This was attributed to changes of both the free energy and the cooling crystallization function K(T) over the entire crystallization process, as well as possible relaxation effects leading to structural rearrangements. In addition, the activation energy determined using the differential isoconversional method of Friedman was also found to vary, indicating changes in both the free energy and crystallization mechanism. Despite the lack of a reliable theoretical model, the heterogeneous nucleating activity of the MMT nanoparticles was demonstrated and quantified using Dobreva's method (? = 0.71), and the crystallization rate for the nanocomposite system was found to be greater than pure MXD6 by up to 79% at 40 °C/min. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1300–1312, 2009     

Nonisothermal crystallization behavior and crystalline structure of poly(3‐hydroxybutyrate)/layered double hydroxide nanocomposites

X‐ray diffraction method and differential scanning calorimetry analysis have been used to investigate the nonisothermal crystallization of poly(3‐hydroxybutyrate) (PHB)/poly(ethylene glycol) phosphonates (PEOPAs)‐modified layered double hydroxide (PMLDH) nanocomposites. Effects of cooling rates and PMLDH contents on the nonisothermal crystallization behavior of PHB were explored. These results show that the addition of 2 wt % PMLDH into PHB caused heterogeneous nucleation increasing the crystallization rate and reducing the activation energy. By adding PMLDH into the PHB probably hinder the transport ability of the molecule chains and result in a decreasing crystallity of PHB, thus increasing the activation energy. The correlation among melting behavior, apparent crystallite size, and paracrystalline distortion of PHB/PMLDH nanocomposites has been also discussed. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 995–1002, 2007     

Fire retardancy behavior of PLA based nanocomposites

To understand and improve the fire retardancy behavior of polylactic acid, we have incorporated two structurally different additives, sepiolite and organically modified montmorillonite. A novel approach (combination of electrospinning and extrusion/injection molding) is employed to address critical issues like char enhancement as well as the homogeneity/uniformity of the inorganic barrier during combustion of polymer nanocomposites. Fundamental knowledge is gained on the mechanisms of fire retardancy, particularly with samples of different thicknesses (thermally thin versus thermally intermediate/thick). Volumetric imaging of the residues provided a deeper understanding of the formation or the evolution of the inorganic barrier. Considerable insight on the dependency of biodegradation on the environment (primarily) and on the compromising effect of high aspect ratio nanoparticles is also obtained. This knowledge has a broader scientific impact and is critical to design the new generation of eco-benign flame retardant and biodegradable polymer nanocomposites.     

Crystallization kinetics and crystallization behavior of syndiotactic polystyrene/clay nanocomposites

We investigated the effects of montmorillonite (clay) on the crystallization kinetics of syndiotactic polystyrene (sPS) with isothermal differential scanning calorimetry analyses. The clay was dispersed into the sPS matrix via melt blending on a scale of 1–2 nm or up to about 100 nm, depending on the surfactant treatment. For a crystallization temperature of 240 °C, the isothermal crystallization data were fitted well with the Avrami crystallization equation. Crystallization data on the kinetic parameters (i.e., the crystallization rate constant, Avrami exponent, clay content, and clay/surfactant cation‐exchange ratio) were also investigated. Experimental results indicated that the crystallization rate constant of the sPS nanocomposite increased with increasing clay content. The clay played a vital role in facilitating the formation on the thermodynamically more favorable all‐β‐form crystal when the sPS was melt‐crystallized. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2097–2107, 2001     

Non-isothermal crystallization and melting behavior of compatibilized polypropylene/recycled poly(ethylene terephthalate) blends

Binary blends of polypropylene (PP)/recycled poly(ethylene terephthalate) (r-PET), r-PET/maleic anhydride grafted PP (PP-g-MA), r-PET/glycidyl methacrylate grafted PP (PP-g-GMA), and ternary blends of PP/r-PET (80/20 w/w) compatibilized with various amounts (2-10 wt%) of PP-g-MA or PP-g-GMA were prepared on a twin-screw extruder. The non-isothermal crystallization and melting behavior, and the crystallization morphology were investigated by DSC and POM. The chemical reactions of r-PET with PP-g-MA and PP-g-GMA were characterized by FT-IR. DSC results show that the crystallization peak temperatures of r-PET and PP increased when blending them together, due to the heterogeneous nucleation effect on each other. The of r-PET increased with increasing the content of PP-g-MA while slightly influenced by the content of PP-g-GMA in the binary blends of r-PET with grafted PP, implying different reactivity of r-PET with PP-g-MA and PP-g-GMA. The of PP in the ternary blends retained or slightly decreased, dependent on the compatibilizers and their contents. The melting peak temperature of r-PET in PP/r-PET blends compatibilized by PP-g-MA was lower than that of compatibilized by PP-g-GMA, indicating that PP-g-MA had stronger reactivity towards r-PET compared to PP-g-GMA. The crystallization and melting behavior of blends was influenced by the pre-melting temperature, especially the melting behavior of r-PET in the blends. The crystallization behavior of PP in the blends was also evaluated by Mo’s method. POM confirmed the heterogeneous nucleation effect of r-PET on PP.     

Modeling the solid-like behavior of entangled polymer nanocomposites at low frequency regimes

A theory for the linear viscoelastic behavior of entangled polymeric liquids reinforced with non-aggregated colloidal nanoparticles is presented. Composites with low filler concentration and strong polymer-particle interaction are considered. A fraction of entangled chains is assumed to be reversibly adsorbed on the surface of fillers, due to the affinity between the polymer molecules in the matrix and dispersed filler particles. The relaxation of the system is analyzed by the combination of stress relaxation functions for free and adsorbed polymer chains. It is demonstrated that the emergence of solid-like behavior at low frequency regimes, is due to the significant slow down in relaxation of adsorbed chains. Fitting the model predictions with relevant experimental data indicates that while the effect of constraint release should be considered to obtain a reasonable estimation of neat polymer behavior, the linear combination of stress relaxation functions of free and adsorbed chains (i.e., no thermal constraint release) leads to a better agreement with experimental data of filled systems.     

Preparation and nonisothermal crystallization behavior of polyamide 6/montmorillonite nanocomposites

Polyamide 6 (PA6)/montmorillonite (MMT) nanocomposites were prepared via melt intercalation. The structure, mechanical properties, and nonisothermal crystallization kinetics of PA6/MMT nanocomposites were investigated by X‐ray diffraction (XRD), tensile and impact tests, and differential scanning calorimetry (DSC). Before melt compounding, MMT was treated with an organic surfactant agent. XRD traces showed that PA6 crystallizes exclusively in γ‐crystalline structure within the nanocomposites. Tensile measurements showed that the MMT additions are beneficial in improving the strength and the stiffness of PA6, at the expense of tensile ductility. Impact tests revealed that the impact strength of PA6/MMT nanocomposites tended to decrease with increasing MMT content. The nonisothermal crystallization DSC data were analyzed by Avrami, Ozawa, modified Avrami‐Ozawa, and Nedkov methods. The validity of these empirical equations on the nonisothermal crystallization process of PA6/MMT nanocomposites is discussed. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2878–2891, 2004     

Nonisothermal crystallization behavior of exfoliated poly(ethylene terephthalate)‐layered silicate nanocomposites in the presence and absence of organic modifier

Exfoliated poly(ethylene terephthalate) (PET)‐layered silicate nanocomposites (P_etLSNs) excluding (P_etLSN_eom) and including (P_etLSN_iom) organic modifiers were obtained by solution methods with and without solvent‐nonsolvent system, respectively. From wide angle X‐ray diffraction and high resolution transmission electron microscopy, both P_etLSNs were found to have exfoliated structure attributed to sufficient dispersion of silicate in prepared solvents, regardless of sample preparation method. However, organic modifier in P_etLSN_eom was confirmed to be well removed by elemental analysis, whereas organic modifier was still remained in P_etLSN_iom. Thus, the effect of the presence and absence of organic modifiers in P_etLSNs on the nonisothermal crystallization behavior was investigated by differential scanning calorimetry (DSC) on the basis of a modified Avrami analysis and polarized optical microscopy (POM). From DSC results, it was found that both P_etLSNs had higher degrees of crystallinity and shorter crystallization half‐times than neat PET, because of the dispersed silicate layers acted as nucleating agents in both P_etLSNs. However, P_etLSN_iom exhibited a lower degree of crystallinity and longer half‐time of crystallization than P_etLSN_eom. Difference of crystallization behavior between P_etLSN_eom and P_etLSN_iom was ascribed to organic modifier in P_etLSN_iom, which may act as crystallization inhibitors. POM measurements also revealed the results which were in good agreement with crystallization behavior observed from DSC measurement. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 989–999, 2008     

Thermal stability and flammability properties of heterophasic PP-EP/EVA/organoclay nanocomposites

A study on the thermal behavior and flammability properties of the heterophasic polypropylene-(ethylene-propylene) copolymer (PP-EP)/poly(ethylene vinyl acetate) (EVA)/montmorillonite nanocomposite is presented. Nanoclay nanocomposites were prepared using a twin screw extruder. Both the fluidity of the EVA phase and compatibility conditions between PP-EP and EVA were used in order to obtain the required nanocomposites. Therefore, no additional compatibilizer was required to achieve the clay dispersion. Products exhibited the partially exfoliated/intercalated nanoclay dispersion. Thermogravimetric analyses indicated that nanoclays retard thermal degradation depending on nanoclay concentration. The retarding process was assigned to the exfoliation and dispersion of the silicate layers which impeded heat diffusion to the macromolecules. Thermal studies, under non-isothermal crystallization, indicated the lack of influence of nanoclay on the thermal behavior. Flammability characteristics were however affected by the nanoclay layers which overall generated flame retardation both in the EVA host and in the complex nanocomposites.     

Electrical conductivity of PUR/MWCNT nanocomposites in the molten state, during crystallization and in the solid state

The electrical conductivity of a nanocomposite constituted of multiwalled carbon nanotubes (MWCNT) dispersed in a semicrystalline polyurethane matrix, is investigated during cooling from the melt to the solid state. The same percolation threshold, ?_c = 0.85 wt.%, is obtained in the molten and in the solid state, although the exponent t of the percolation equation is significantly higher in the solid state. A remarkable increase of the conductivity during crystallization is observed for nanocomposites of MWCNT content above ?_c, but for contents below ?_c the conductivity decreases. Combined conductivity and PVT results, lead us to discard the hypothesis of an increase of the density of the conductive network (associated with volume shrinkage) as being the cause of the conductivity enhancement during crystallization. Instead, the analysis of the parameters of the percolation equation for the molten and the solid state, suggests a transition from a less effective conductive network to a more performing three dimensional network.     

聚丙烯/蒙脱土纳米复合材料的等温结晶研究

采用差示扫描量热法 (DSC)对插层聚合法制备的聚丙烯 /蒙脱土纳米复合材料 (PP MMT)的等温结晶过程进行了研究 .引入蒙脱土 (MMT)后 ,PP MMT的结晶速率大幅度提高 ,相对结晶度略有下降 .采用Avrami方程对结晶动力学进行研究 ,Avrami指数n≈ 3 .0 ,半结晶时间t1 2 大幅度降低 .采用Hoffman理论计算了PP MMT的球晶生长的单位面积表面自由能σe,结果表明σe 随MMT含量的增加逐渐降低     

Nonisothermal crystallization kinetics and determination of surface‐folding free energy of PP/EVA/OMMT nanocomposites

Crystalline structures, nonisothermal crystallization behavior and surface folding free energy of polypropylene (PP)/poly(ethylene‐co‐vinyl acetate) (EVA) blend‐based organically modified montmorillonite (OMMT) nanocomposites were investigated by use of wide angle X‐ray scattering (WAXS) and differential scanning calorimetry (DSC) techniques. Nonisothermal crystallization kinetic analysis was performed using Avrami equation modified by Jeziorny as well as combined Avrami‐Ozawa method. Surface folding free energy and activation energy for PP and nanocomposite samples were also determined employing Hoffman‐Lauritzen's and Vyazovkins's approaches, respectively. The results obtained from transmission electron microscopy (TEM) showed that presence of EVA, which attracts most of the layered silicates, reduces number density of heterogeneous nuclei in the matrix and as a consequence, decreases the nucleation rate. Incorporation of EVA, PP‐g‐MA and OMMT results in a decrease of the chain surface folding free energy level. It was shown that although, OMMT acts as a barrier against the PP macromolecular motion but interestingly, it increases the overall crystallization rate. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 674–684, 2009     

Isothermal crystallization behavior and unique banded spherulites of hydroxyapatite/poly(L-lactide) nanocomposites

<正>Hydroxyapatite/poly(L-lactide)(HA/PLLA) nanocomposites were prepared by the solvent mixing method.The isothermal crystallization behavior was studied by differential scanning calorimetry(DSC) and polarized optical microscopy (POM).The results show that the crystallization behavior of HA/PLLA composites was strongly affected by the content of HA and crystallization temperature,and the addition of HA could promote nucleation and enhance the crystallization rate. When isothermal crystallization was carried out at 110℃,the HA/PLLA nanocomposite with 1%HA content crystallized most rapidly among all the composites and the half crystallization time was only 1.0 min.Banded spherulites were observed for the HA/PLLA composites,but no banded spherulites were seen in the crystals of PLLA under the same condition.