A highly coercive carbon nanotube coated with Ni0.5Zn0.5Fe2O4 nanocrystals synthesized by chemical precipitation-hydrothermal process

Novel magnetic composites (Ni_0.5Zn_0.5Fe₂O₄-MWCNTs) of multi-walled carbon nanotubes (MWCNTs) coated with Ni_0.5Zn_0.5Fe₂O₄ nanocrystals were synthesized by chemical precipitation-hydrothermal process. The composites were characterized by X-ray powder diffractometer (XRD), X-ray photoelectron spectrometer (XPS), Fourier transform infrared spectroscopy (FTIR), Mössbauer spectroscopy (MS), transmission electron microscopy (TEM), and selected area electron diffraction (SAED), etc. A temperature of about 200 °C was identified to be an appropriate hydrothermal condition to obtain Ni_0.5Zn_0.5Fe₂O₄-MWCNTs, being lower than the synthesis temperature of a single-phase Ni_0.5Zn_0.5Fe₂O₄ nanocrystals. The sizes of Ni_0.5Zn_0.5Fe₂O₄ in the composites were smaller than those of Ni_0.5Zn_0.5Fe₂O₄ nanocrystals in single phase. The composites exhibited more superparamagnetic than Ni_0.5Zn_0.5Fe₂O₄ nanocrystals in their relaxation behaviors. The magnetic properties measured by a vibrating sample magnetometer showed that the composites had a high coercive field of 386.0 Oe at room temperature, higher than those of MWCNT and Ni_0.5Zn_0.5Fe₂O₄ nanocrystals.     

Facile synthesis of multifunctional multiwalled carbon nanotubes/Fe3O4 nanoparticles/polyaniline composite nanotubes

With an average diameter of 100-150 nm, composite nanotubes of polyaniline (PANI)/multiwalled carbon nanotubes (MWNTs) containing Fe₃O₄ nanoparticles (NPs) were synthesized by a two-step method. First, we synthesized monodispersed Fe₃O₄ NPs (d=17.6 nm, σ=1.92 nm) on the surface of MWNTs and then decorated the nanocomposites with a PANI layer via a self-assembly method. SEM and TEM images indicated that the obtained samples had the morphologies of nanotubes. The molecular structure and composition of MWNTs/Fe₃O₄ NPs/PANI nanotubes were characterized by Fourier transform infrared spectra (FTIR), energy dispersive X-ray spectrometry (EDX), X-ray photoelectron spectra (XPS), X-ray diffraction (XRD) and Raman spectra. UV-vis spectra confirmed the existence of PANI and its response to acid and alkali. As a multifunctional material, the conductivity and magnetic properties of MWNTs/Fe₃O₄ NPs/PANI composites nanotubes were also investigated.     

Ultrasonic-assisted synthesis of PMMA/Ni0.5Zn0.5Fe2O4 nanocomposite in mixed surfactant system

PMMA/Ni_0.5Zn_0.5Fe₂O₄ nanocomposite with superparamagnetic behavior was synthesized by in situ emulsion polymerization of methylmethacrylate (MMA) monomer in the presence of Ni_0.5Zn_0.5Fe₂O₄ colloidal suspension assisted by ultrasonic irradiation. The obtained samples were characterized by X-ray diffraction (XRD), Fourier transform infrared spectra (FT-IR), transmission electron microscopy (TEM) and vibrating sample magnetometer (VSM). XRD and FT-IR spectra confirmed the formation of PMMA/Ni_0.5Zn_0.5Fe₂O₄ nanocomposite. TEM images showed that Ni_0.5Zn_0.5Fe₂O₄ nanoparticles with the particle sizes of about 12 nm were well dispersed in the polymer matrix. The nanocomposite at room temperature exhibited superparamagnetic behavior under applied magnetic field. The formation mechanism of PMMA/Ni_0.5Zn_0.5Fe₂O₄ nanocomposite was proposed as well.     

Self-assembly approach for the synthesis of electro-magnetic functionalized Fe3O4/polyaniline nanocomposites: Effect of dopant on the properties

Electro-magnetic functionalized Fe₃O₄/polyaniline (PANI) nanocomposites were synthesized by chemical oxidative polymerization in the presence of ammonium peroxydisulfate as an oxidizing agent. Polymerization was carried out independently using two different types of dopants, organic acids (camphorsulfonic acid (CSA) and p-toluenesulfonic acid (TSA)) and inorganic acid (hydrochloric acid). A plausible mechanism for the formation of the nanocomposites (NCs) is presented. During the formation of NCs, CSA/TSA also serves as a micellar template, whereas micelle formation is absent in the case of HCl. Fe₃O₄/PANI-CSA-NC, Fe₃O₄/PANI-TSA-NC and Fe₃O₄/PANI-HCl-NC were characterized for morphology, molecular structure, electrical conductivity and magnetic properties by transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), UV–visible spectroscopy (UV–vis) and superconductor quantum interference device (SQUID) measurements. The results indicate that dopant influence the properties of the NCs. TEM photographs of Fe₃O₄/PANI-CSA and Fe₃O₄/PANI-TSA reveal that the composite particles are spherical having a layer of PANI-CSA or PANI-TSA over Fe₃O₄ nanoparticles. Fe₃O₄/PANI-CSA-NC and Fe₃O₄/PANI-TSA-NC have better morphology, conductivity and high magnetic saturation (M_s) than that of Fe₃O₄/PANI-HCl-NC. Under applied magnetic field, the NCs exhibit the hysteresis loops of the ferromagnetic behavior. M_s value varies with content of Fe₃O₄ present in the composites.     

Radar Absorption Properties of Ni0.5Zn0.5Fe2O4/PANI/epoxy Nanocomposites

A nitrate? citrate gel was prepared from metallic nitrates and citric acid by sol? gel process and was further used to synthesize Ni_0.5Zn_0.5Fe₂O₄ nanocrystalline powder by auto‐combustion. Then, two novel 15 and 35% (w/w) magnetic Ni_0.5Zn_0.5Fe₂O₄ containing polyaniline nanocomposites, named as PANI‐Ni15 and PANI‐Ni35, respectively, were prepared via in‐situ polymerization of aniline in an aqueous solution containing proper amount of Ni_0.5Zn_0.5Fe₂O₄ magnetic powder. The incorporation of the nanopowders to PANI matrix was confirmed by X‐ray diffraction (XRD), IR and SEM. Synthesized PANI‐NiZn ferrite composite particles were subsequently added to an epoxy resin matrix to produce related nanocomposites. The morphological properties of these nanocomposite materials were investigated by SEM and TEM. The electromagnetic‐absorbing properties were studied by measuring the reflection loss in the frequency range of 8.0 to 12.0 GHz. Results showed the reflection loss of the PANI‐Ni35 composite is higher than pure polyaniline and PANI‐Ni15. The good reflection loss of the nanocomposites suggests their potential applicability as radar absorber.     

三明治结构rGO/Fe3O4@mSiO2载体的构筑及协同抗肿瘤性能

采用温和的反应条件,制备出三明治结构rGO/Fe_3O_4@mSiO_2,利用SEM、TEM、FTIR、XRD和N_2吸附-脱附等对其形貌和性能进行表征,考查了其对Hela细胞的毒性和细胞荧光成像效果,并探讨了其形成机理。实验结果表明:rGO/Fe_3O_4@mSiO_2具有较高的比表面积(217 m~2·g~(-1)),对抗癌药物五氟尿嘧啶(5-FU)的载药率达到57.34%;它还具有较好的磁性,磁饱和强度为32 emu·g-1;而且rGO/Fe_3O_4@mSiO_2纳米复合物在光照条件下具有优异的光热转换性能,对He La细胞表现出明显的杀伤效果。     

新型磁性荧光Fe3O4-CdSe纳米复合材料的制备

以1-十八烯作为高沸点溶剂, 在磁性粒子表面沉积量子点获得新型的磁性荧光Fe₃O₄-CdSe 纳米异质结构. 首先以乙酰丙酮铁(Fe(acac)₃)为前驱体, 二苯醚为溶剂, 油酸为表面活性剂和油胺(OAm)为表面活性剂兼还原剂, 通过溶剂热法制备单分散性的Fe₃O₄ 纳米粒子. 然后以1-十八烯为高沸点溶剂, CdO 为镉源,TOP-Se为硒源, 十六胺为表面活性剂以及硬脂酸为生长促进剂和成核剂制备得到新型的Fe₃O₄-CdSe纳米异质结构. 通过透射电镜(TEM), 傅里叶变换红外(FTIR)光谱, X射线衍射(XRD)谱, X射线光电子能谱(XPS)分析仪, 振动样品磁强计(VSM), 紫外-可见(UV-Vis)光谱和光致发光(PL)等手段对Fe₃O₄-CdSe 纳米复合材料的结构和性能进行表征. 结果表明, CdSe纳米粒子成功地吸附在Fe₃O₄纳米粒子表面, 并沿着c轴生长, 形成了宽3.6 nm, 长分别为14.5 和32.5 nm的新型枣核状和钉子状的异质结构体. 这种新型的Fe₃O₄-CdSe纳米复合材料是由磁铁矿Fe₃O₄和六方形的CdSe棒状结构组成, 具有较好的荧光性能和超顺磁性. 随着CdSe棒长度的增加, 荧光吸收峰向长波方向移动. Fe₃O₄纳米粒子, 枣核状和钉子状的Fe₃O₄-CdSe纳米复合材料的饱和磁化强度分别是57.80, 40.76和31.10 emu·g^-1.     

Preparation, Characterization and Magnetic Properties of PANI/La-substituted LiNi Ferrite Nanocomposites

Magnetic nanocomposites containing polyaniline （PANI）-coated La-substituted LiNi ferrite （LiNi0.5La0.02Fe1.98O4） were synthesized by in situ polymerization in aqueous solution of hydrochloric acid. The nanocomposites exhibited the magnetic hysteresis nature under applied magnetic field. The saturation magnetization （Ms） and coercivity （Hc） varied with the ferrite content. The obtained nanocomposites were characterized by X-ray diffraction （XRD）, transmission electron microscopy （TEM）, scanning electron microscopy （SEM）, Fourier transform infrared spectroscopy （FT-IR）, UV-Visible spectroscopy and vibrating sample magnetometer （VSM）. TEM and SEM studies showed that the nanocomposites present the core-shell structure. The results of XRD patterns, FT-IR and UV-Visible spectra indicated the formation of PANI-LiNi0.5La0.002Fe1.98O4 nanocomposites and showed that the interaction existed between PANI backbone and ferrite particles in the nanocomposites. The bonding mechanism in the nanocomposites has been proposed.     

Effect of varying the acid to metal ion ratio R on the structural and magnetic properties of SiO2-doped Ni-Zn ferrite

A nitrate-citrate-silica gel was prepared from metallic nitrates, citric acid and tetraethoxysilane (TEOS) by sol-gel process with different citric acid to metal nitrates ratio R, and it was further used to synthesize Ni_0.5Zn_0.5Fe₂O₄/20 wt% SiO₂ nanocomposites by auto-combustion. The effect of varying the citric acid to metal nitrates ratio R on the structural and magnetic properties of the composites were studied by IR, ²⁹Si CP/MAS NMR, XRD, EPR and SQUID measurements. The nitrate-citrate-silica gels exhibited self-propagating combustion behavior, and it directly transformed into nanosized (14-22 nm) NiZn ferrite particles with spinel crystal structure after combustion. The R value in the starting solution affects the magnetic interaction between NiZn ferrite and silica, and then determines the particle size. Further, varying the R value has a direct effect on the EPR parameters (ΔH_PP, g factor, N_S and T₂) and SQUID parameters (M_s, M_r and H_c) of the as-synthesized powder.     

Preparation and Characterization of Single-Phase Perovskite La0.6Sr0.4Co0.8Fe0.2O3-δ

Single-phase perovskite La0.6Sr0.4Co0.8Fe0.2O3-δ has been successfully prepared by using citrate-EDTA complexation method at relatively low calcination temperature. The structure and thermal decomposition process of the complex precursor have been investigated by means of differential scanning calorimetry-thermal gravimetric analysis (DSC/TGA), X-ray diffraction (XRD), and Fourier transform infrared spectroscopic (FT-IR) measurements. The precursor decomposed completely and started to form perovskite-type oxide above 420℃ according to the differential scanning calorimetry (DSC) and thermal gravimetric analysis (TGA) results. Single-phase perovskite La0.6Sr0.4Co0.8Fe0.2O3-δ obtained has been confirmed from the XRD pattern, and no peak of SrCO3 was found by XR.D of the oxides synthesized at a relatively low temperature of 800 ℃. The reducibility of La0.6Sr0.4Co0.8Fe0.2O3-δ was also characterized by the temperature programmed reduction (TPR) technique. Disk shaped dense La0.6Sr0.4Co0.8Fe0.2O3-δ membrane was prepared by the isostatical pressing method. The oxygen flux rate of dense La0.6Sr0.4Co0.8Fe0.2O3-δ membrane was (2.8-18)×10-8 mol/(cm2·s) in the temperature range of 800-1 000℃.     

Research on WPU‐RGO/ATP‐Fe3O4/chitosan composites with excellent electrical and magnetic properties

First, attapulgite‐Fe₃O₄ magnetic filler (ATP‐Fe₃O₄) was prepared by using a chemical precipitation method. Subsequently, graphite oxide (GO) was prepared through Hummer method, and then reduced GO (RGO) was prepared through GO reduced by chitosan (CS). Finally, a series of WPU‐RGO/ATP‐Fe₃O₄/CS composites were prepared by introduced RGO/ATP‐Fe₃O₄/CS to waterborne polyurethane. The structure and properties were characterized by scanning electron microscopy (SEM), Fourier transform infrared (FTIR), X‐ray diffraction (XRD), vibrating sample magnetometry (VSM), thermogravimetric analysis TGA, conductivity test, and tensile test. The experimental results indicated that thermal stability and tensile strength of nanocomposites were improved with the increase of the content of RGO/ATP‐Fe₃O₄/CS. Meanwhile, with the increase of the RGO/ATP‐Fe₃O₄/CS content, the electrical and magnetic properties of WPU‐RGO/ATP‐Fe₃O₄/CS composites were improved. When the content of RGO/ATP‐Fe₃O₄/CS was 8 wt%, the electrical conductivity and the saturation magnetic strength of WPU‐RGO/ATP‐Fe₃O₄/CS composites were 3.1 × 10^?7 S·cm^?1 and 1.38 emu/g, respectively. WPU‐RGO/ATP‐Fe₃O₄/CS composites have excellent electrical and magnetic properties.     

Local structure and hyperfine interactions of Fe and Sn atoms in brownmillerite-like ferrite Sr2Fe1.98Sn0.02O5+x

Mössbauer spectroscopy has been applied for studying local environment of ⁵⁷Fe and ¹¹⁹Sn probe atoms within tin-doped Sr₂Fe_1.98Sn_0.02O_5+x (x?0.02) ferrite with the brownmillerite-type structure. ⁵⁷Fe Mössbauer spectra indicate no appreciable local distortions induced by the tin dopant atoms. The ¹¹⁹Sn spectra recorded below the magnetic ordering temperature (T_N) can be described as a superposition of two Zeeman sextets, which indicate that Sn⁴⁺ dopant ions are located in two non-equivalent crystallographic and magnetic sites. The observed hyperfine parameters were discussed supposing Sn⁴⁺ cations to replace iron cations in the octahedral (Sn_O) and tetrahedral (Sn_T) sublattices. It has been supposed that Sn⁴⁺ cations being stabilized in the tetrahedral sublattice complete their nearest anion surrounding up to the octahedral oxygen coordination “Sn_T⁴⁺”. Annealing of the Sr₂Fe_1.98Sn_0.02O_5+x in helium flux conditions at 950°C leads to formation of divalent Sn²⁺ cations with a simultaneous decrease of the contribution for the Sn_T⁴⁺ sub-spectrum. The parameters of combined electric and magnetic hyperfine interactions of the ¹¹⁹Sn²⁺ sub-spectrum underline that impurity atoms are stabilized in the sp³d-hybrid state in the oxygen distorted tetragonal pyramid. The analysis of the ¹¹⁹Sn spectra indicates a chemical reversibility of the processes Sn_T²⁺?Sn_T⁴⁺ within the tetrahedral sublattice of the brownmillerite-type ferrite.     

Synthesis and characterization of La0.8Sr1.2Co0.5M0.5O4−δ (M=Fe, Mn)

The M⁴⁺-containing K₂NiF₄-type phases La_0.8Sr_1.2Co_0.5Fe_0.5O₄ and La_0.8Sr_1.2Co_0.5Mn_0.5O₄ have been synthesized by a sol–gel procedure and characterized by X-ray powder diffraction, thermal analysis, neutron powder diffraction and Mössbauer spectroscopy. Oxide ion vacancies are created in these materials via reduction of M⁴⁺ to M³⁺ and of Co³⁺ to Co²⁺. The vacancies are confined to the equatorial planes of the K₂NiF₄-type structure. A partial reduction of Mn³⁺ to Mn²⁺ also occurs to achieve the oxygen stoichiometry in La_0.8Sr_1.2Co_0.5Mn_0.5O_3.6. La_0.8Sr_1.2Co_0.5Fe_0.5O_3.65 contains Co²⁺ and Fe³⁺ ions which interact antiferromagnetically and result in noncollinear magnetic order consistent with the tetragonal symmetry. Competing ferromagnetic and antiferromagnetic interactions in La_0.8Sr_1.2Co_0.5Fe_0.5O₄, La_0.8Sr_1.2Co_0.5Mn_0.5O₄ and La_0.8Sr_1.2Co_0.5Mn_0.5O_3.6 induce spin glass properties in these phases.     

A facile two-step modifying process for preparation of poly(SStNa)-grafted Fe3O4/SiO2 particles

This article reports the synthesis of the poly(sodium 4-styrenesulfonate)-grafted Fe₃O₄/SiO₂ particles via two steps. The first step involved magnetite nanoparticles (Fe₃O₄) homogeneously incorporated into silica spheres using the modified Stöber method. Second, the modified silica-coated Fe₃O₄ nanoparticles were covered with the outer shell of anionic polyelectrolyte by surface-initiated atom transfer radical polymerization. The resulted composites were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), energy dispersive microscopy (EDS), Fourier transform-infrared (FT-IR), thermogravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS) and vibration sample magnetometer (VSM). The XRD results indicated that the surface modified Fe₃O₄ nanoparticles did not lead to phase change compared with the pure Fe₃O₄. TEM studies revealed nanoparticles remained monodisperse. The detection of sulfur and sodium signals was a convincing evidence that sodium 4-styrenesulfonate was grafted onto the surface of the magnetic silica in XPS analysis. Finally, super-paramagnetic properties of the composite particles, and the ease of modifying the surfaces may make the composites of important use in mild separation, enzyme immobilization, etc.     

Ag/PANI/Fe_2O_3复合纳米粒子的合成与催化性能

借助于PANI的还原性质,PANI/Fe2O3复合载体与AgNO3发生表面氧化还原反应,合成了Ag/PANI/Fe2O3复合纳米粒子。TEM和XRD结果表明,立方晶系纳米银的平均粒径10nm。FTIR结果表明,Ag与PANI及Fe2O3复合载体之间不存在化学键合作用,但由于PANI与Ag之间的电子相互作用,Ag/PANI/Fe2O3复合纳米粒子的FTIR吸收峰发生蓝移。Ag/PANI/Fe2O3复合纳米粒子对于间硝基苯磺酸钠的硼氢化钠还原反应表现出良好的催化活性,30min内间硝基苯磺酸钠的转化率达到86.77%。     

New Synthesis and Magnetic Properties of NiFe2O4/SiO2 and Co0.5Zn0.5Fe2O4/SiO2 Nanocomposites Using Tetraglycolatosilane as Precursor

In this work the new synthesis and magnetic properties of NiFe₂O₄/SiO₂ and Co_0.5Zn_0.5Fe₂O₄/SiO₂ nanocomposites using a water‐soluble silica precursor, tetraglycolatosilane (THEOS), by the sol‐gel method were reported. Nanocomposite were obtained by the thermal decomposition of the organic part at different annealing temperatures varying from 400 to 900 °C. Studies carried out using XRD, FT‐IR, TEM, STA (TG‐DTG‐DTA) and VSM techniques. XRD patterns show that NiFe₂O₄ and Co_0.5Zn_0.5Fe₂O₄ have been formed in an amorphous silica matrix at annealing temperatures above 600 and 400 °C, respectively. It is found that when the annealing temperature is up to 900 °C NiFe₂O₄/SiO₂ and Co_0.5Zn_0.5Fe₂O₄/SiO₂ samples show almost superparamagnetic behavior with a magnetization 4.66 emu/g and ferromagnetic behavior with a magnetization 10.11 emu/g, respectively. The magnetization and coercivity values of nanocomposites using THEOS were considerably less than previous reports using TEOS. THEOS as a silica matrix network provides an ideal nucleation environment to disperse ferrite nanoparticles and thus to confine them to aggregate and coarsen. By using THEOS over the currently used TEOS and TMOS, organic solvents are not needed due to the entire solubility of THEOS in water. Synthesized nanocomposites with adjustable particle sizes and controllable magnetic properties make the applicability of ferrites even more versatile.     

Study of nano-sized (ZnFe2O4)y particles/CuTl-1223 superconductor composites

Zinc ferrite (ZnFe₂O₄)_y nanoparticles/Cu_0.5Tl_0.5Ba₂Ca₂Cu₃O_10−δ (CuTl-1223) superconductor composites with y = 0–2 wt.% were prepared by adding ZnFe₂O₄ nanoparticles into CuTl-1223 superconductor matrix and characterized by using X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray (EDX), Fourier transforms infrared (FTIR) spectroscopy and dc-resistivity (ρ) measurements. The bulk CuTl-1223 superconductor matrix was synthesized by solid-state reaction and Zinc ferrite (ZnFe₂O₄) nanoparticles were separately prepared by sol–gel method. XRD analysis revealed the tetragonal and spinel structure of CuTl-1223 superconductor and ZnFe₂O₄ nanoparticles, respectively. The XRD analysis showed that increased concentration of ZnFe₂O₄ nanoparticles doesn't disturb the tetragonal structure of host CuTl-1223 superconductor matrix and has no appreciable effect on its lattice parameters. The SEM images confirm the granular structure of the host superconductor matrix. The presence of ZnFe₂O₄ nanoparticles in host superconductor matrix is confirmed by using FTIR study. Variation of zero resistivity critical temperature {T_c (0)} depends upon the concentration of the nanoparticles in the host superconductor matrix. The overall suppression of T_c (0) and diamagnetism with increasing nanoparticles concentration is most probably due to trapping of mobile free carriers and reflection of spin charge due to presence of paramagnetic ZnFe₂O₄ nanoparticles. There is possibility for the incorporation of Fe and Zn in the lattice sites during the synthesis process, which may also cause the reduction of T_c (0) of the final composites.     

Fe3O4/N-rGO复合材料的制备及其电化学电容性能

通过简单的一步水热法成功制备了Fe_3O_4/氮掺杂还原石墨烯(Fe_3O_4/N-r GO)复合物电极材料。采用X-射线衍射、X-射线光电子能谱、扫描电镜和透射电镜等手段对其结构和形貌进行了表征,用循环伏安法、交流阻抗和恒电流充放电等方法研究了所制备材料的电化学性能。结果表明,Fe_3O_4/N-rGO具有更高的比电容和更好的循环稳定性,在0.5A/g的电流密度下,其比电容高达291.7F/g,远高于纯的Fe_3O_4和纯的NrGO的比电容。这是由于小粒径Fe_3O_4的加入大大降低了石墨烯的团聚,两者间的协同作用使复合物的比电容得到了提高。     

Facile synthesis of multifunctional attapulgite/Fe3O4/polyaniline nanocomposites for magnetic dispersive solid phase extraction of benzoylurea insecticides in environmental water samples

In this study, the superparamagnetic attapulgite/Fe₃O₄/polyaniline (ATP/Fe₃O₄/PANI) nanocomposites were successfully synthesized by a one-pot method. Fe (III) was applied as both the oxidant for the oxidative polymerization of aniline and the single iron source of Fe₃O₄ formed by the redox reaction between aniline and Fe (III). The ATP/Fe₃O₄/PANI was used as sorbent for magnetic dispersive solid phase extraction (MDSPE) of benzoylurea insecticides (BUs) in environmental water samples. The as-prepared nanocomposite sorbents were characterized by Fourier transform infrared spectra (FT-IR), X Ray diffraction (XRD), scanning electron microscopy(SEM), transmission electron microscopy (TEM), and vibrating sample magnetometry. Various experimental parameters affecting the ATP/Fe₃O₄/PANI-based MDSPE procedure, including the composition of the nanocomposite sorbents, amount of ATP/Fe₃O₄/PANI nanocomposites, vortex time, pH, and desorption conditions were investigated. Under the optimal conditions, a good linearity was observed for all target analytes, with correlation coefficients (r²) ranging from 0.9985 to 0.9997; the limits of detection (LOD) were in the range of 0.02–0.43 μg L⁻¹, and the recoveries of analytes using the proposed method ranged between 77.37% and 103.69%. The sorbents exhibited an excellent reproducibility in the range of 1.52–5.27% in extracting the five target analytes. In addition, the intra-day and inter-day precision values were found to be in the range of 0.78–6.86% and 1.66–8.41%, respectively. Finally, the proposed ATP/Fe₃O₄/PANI-based MDSPE method was successfully applied to analyze river water samples by rapid preconcentration of BUs.     

Synthesis of Co/MFe2O4 (M=Fe, Mn) core/shell nanocomposite particles

Monodispersed cobalt nanoparticles (NPs) with controllable size (8–14 nm) have been synthesized using thermal decomposition of dicobaltoctacarbonyl in organic solvent. The as-synthesized high magnetic moment (125 emu/g) Co NPs are dispersible in various organic solvents, and can be easily transferred into aqueous phase by surface modification using phospholipids. However, the modified hydrophilic Co NPs are not stable as they are quickly oxidized, agglomerated in buffer. Co NPs are stabilized by coating the MFe₂O₄ (M=Fe, Mn) ferrite shell. Core/shell structured bimagnetic Co/MFe₂O₄ nanocomposites are prepared with tunable shell thickness (1–5 nm). The Co/MFe₂O₄ nanocomposites retain the high magnetic moment density from the Co core, while gaining chemical and magnetic stability from the ferrite shell. Compared to Co NPs, the nanocomposites show much enhanced stability in buffer solution at elevated temperatures, making them promising for biomedical applications.