Characterization of mechanical properties of jute/PLA composites containing nano SiO2 modified by coupling agents

Although jute fiber-reinforced PLA composites show strong application prospects, their low mechanical properties limit their applications to some extent. In this paper, nano-SiO₂ particles as well as nano SiO₂ modified by coupling agents which can efficiently improve the strength and toughness of composite materials are introduced into the PLA matrix. The bending, stretching and thermal properties of designed jute/PLA nonwoven composites were studied. The study shows that the nano-SiO₂ particles are beneficial to the interface performance between the PLA matrix and jute leading to improvement in the mechanical properties and thermal stability. Moreover, thermomechanical properties indicate that the addition of SiO₂ can improve the jute/PLA interfacial adhesion and increase the glass transition temperature of the material. Finally, toughening mechanism of nano-SiO₂ particles in the jute/PLA composite was analyzed.

     

Mechanical properties of surface treated UHMWPE fiber and SiO2 filled PMMA composites

The hybrid reinforcement effect of surface‐treated UHMWPE fiber and SiO₂ on the mechanical properties of PMMA matrix composites was investigated. When UHMWPE fiber is introduced, the tensile strength of UHMWPE fiber‐reinforced composites sharply increases. The flexural modulus was enhanced with an increase in filler loading. Flexural modulus of the treated UHMWPE/SiO₂/PMMA composites was higher than that of the UHMWPE/PMMA and UHMWPE/SiO₂/PMMA composites. The outcome of the better interfacial bonding between the filler and the matrix is reflected in the improvement of the mechanical properties of the treated UHMWPE/SiO₂/PMMA composites. Copyright © 2017 John Wiley & Sons, Ltd.     

Polypropylene wax (PPw)/silica hybrid by in situ non-aqueous sol–gel process for preparation of PP/silica nanocomposites

This paper presented a novel approach to prepare PP/silica nanocomposites. First, PPw-g-KH570 (γ-methacryloxypropyl trimethoxysilane) was obtained by pre-irradiation grafting method and characterized by FTIR and TGA. Then the non-aqueous sol–gel gelation kinetics of TEOS (tetraethoxysilane)-formic acid system in xylene was researched. Subsequently PPw/silica hybrid was obtained by in situ non-aqueous sol–gel reaction of TEOS in the presence of PPw-g-KH570 solution in xylene. Finally PP/silica nanocomposites were prepared by blending of PP matrix and PPw/silica hybrid. The mechanism of in situ formed PPw/silica hybrid was proposed. The morphology of PPw/silica hybrid and microstructures of PP/silica nanocomposites were characterized by TEM and SEM. The mechanical and thermal properties of PP/silica nanocomposites were also well studied by tensile tests and DSC. It was showed that the nanosilica particles were well dispersed in PPw/silica hybrid with the aid of grafting KH570 due to co-condensation by grafted KH570 and TEOS. PPw/silica hybrid was well dispersed in PP matrix with good compatibility and strong interactions. The resulted PP/silica nanocomposites possessed better performance than that of pure PP matrix.     

Strong interfacial modified aramid fabric reinforced degradable thermosetting composites: reinforcing and tribological effects

In this work, dense molybdenum disulfide (MoS₂) nanosheets were grown onto polydopamine (PDA) functionalized aramid fabric (AF) surface via a simple hydrothermal method to improve the wettability between AF surface and polyhexahydrotriazine (PHT) resin, thus resulting in stronger AF/resin interfacial bonding. The PDA-assisted surface modification on AF generated a high active interface allowing the nucleation and subsequent growth of MoS₂. Moreover, this nanosheet-coated reinforcement fiber enabled the viscous liquid of resin precursor to spread over and form intimate contact with its surface, which eventually promoted the formation of strong interfacial bonding between AF-MoS₂ and cured resin matrix. In addition, the enhanced interfacial bonding between the reinforcement and matrix generated stable mechanical interlock within the resulting AF-MoS₂/PHT composites, and thus, contributed better thermal stability, higher tensile strength, and tribological properties. Compared with AF/PHT composites, the tensile strength and elongation at break of the AF-MoS₂/PHT composites increased by 32.5% and 50%, and the average friction coefficient and wear rate of AF-MoS₂/PHT composites decreased by 43.9% and 86.3%, respectively. Furthermore, the composites realized the non-destructive recovery of expensive AF at 25 °C. Overall, our study demonstrates a dependable strategy to construct the recyclable AF-MoS₂/PHT composites, which exhibit valuable applications in tribology.     

Effect of the interfacial interaction on the phase structure and rheological behavior of polypropylene/ethylene– octene copolymer/BaSO4 ternary composites

In polypropylene (PP)/ethylene–octene copolymer (POE)/BaSO₄ ternary composites, two different kinds of phase structures are assumed:(1) POE and BaSO₄ filler are separately dispersed in the PP matrix and (2) POE‐encapsulated filler particles (core–shell structure) are dispersed in the matrix. This depends on the interfacial interaction of the composites. For the design of composites with different interfacial interactions, three routes for the preparation of BaSO₄ master batches were developed. First, a mixture of BaSO₄, POE, and maleic anhydride (MAH) in a certain ratio was extruded in the presence of dicumyl peroxide and then pelletized. In extrusion, MAH‐functionalized POE was in situ formed to enhance the interfacial interaction between POE and BaSO₄. Second, a mixture of POE and BaSO₄ was directly extruded and then pelletized. Third, after BaSO₄ was treated with an organic titanate coupling agent, the treated BaSO₄ and POE were blended in extrusion and then pelletized. Scanning electron microscopy observations showed that the core–shell structure in which POE encapsulates BaSO₄ particles is formed through route 1, whereas POE and BaSO₄ are separately dispersed into the PP matrix through routes 2 and 3. The rheological behavior of PP/POE/BaSO₄ ternary composites was studied with a controlled stress rheometer. The results showed that the interfacial interaction in composites with core–shell morphology is the strongest. Interparticle interactions give rise to the formation of interparticle networks; the stronger the network is, the larger the shear yield stress is and the smaller the thixotropic loop area is. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1804–1812, 2002     

Completely biodegradable composites of poly(propylene carbonate) and short,lignocellulose fiber Hildegardia populifolia

The composites of biodegradable poly(propylene carbonate) (PPC) reinforced with short Hildegardia populifolia natural fiber were prepared by melt mixing followed by compression molding. The mechanical properties, thermal properties, and morphologies of the composites were studied via static and dynamic mechanical measurements, thermogravimetric analysis, and scanning electron microscopy (SEM) techniques, respectively. Static tensile tests showed that the stiffness and tensile strength of the composites increased with an increasing fiber content. However, the elongation at break and the energy to break decreased dramatically with the addition of short fiber. The relationship between the experimental results and the compatibility or interaction between the PPC matrix and fiber was correlated. SEM observations indicated good interfacial contact between the short fiber and PPC matrix. Thermogravimetric analysis revealed that the introduction of short Hildegardia populifolia fiber led to a slightly improved thermooxidative stability of PPC. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 666–675, 2004     

Effect of polyaniline as a surface modifier of TiO2 nanoparticles on the properties of polyvinyl chloride/TiO2 nanocomposites

Surface of TiO2 nanoparticles was modified with the in situ chemical oxidative polymerization of aniline. Polyaniline modified TiO2 nanoparticles (PANI-TiO2 ) were characterized with the FT-IR, XRD, SEM and TEM techniques. Results confirmed that PANI was grafted successfully on the surface of TiO2 nanoparticles, therefore agglomeration of nanoparticles decreased dramatically. Polyvinyl chloride nanocomposites filled with 1 wt% 5 wt% of PANI-TiO2 and TiO2 nanoparticles were prepared via the solution blending method. PVC nanocomposites were analyzed with FT-IR, XRD, SEM, TG/DTA, DSC and tensile test techniques. Effect of PANI as surface modifier of nanoparticles was discussed according to the final properties of PVC nanocomposites. Results demonstrated that deposition of PANI on the surface of TiO2 nanoparticles improved the interfacial adhesion between the constituents of nanocomposites, which resulted in better dispersion of nanoparticles in the PVC matrix. Also PVC/PANI-TiO2 nanocomposites showed higher thermal resistance, tensile strength and Young’s modulus compared to those of unfilled PVC and PVC/TiO2 nanocomposites.     

Mechanical and thermal properties of poly-ether ether ketone reinforced with CaCO3

CaCO₃/PEEK (poly-ether ether ketone) composites were prepared on a twin-screw extruder with different mass ratio of CaCO₃/PEEK from 0% to 30%. Four types of particles were used as filler in PEEK matrix. The influence of surface treatment with sulfonated PEEK (SPEEK) of the particles on the mechanical and thermal properties of the composites was studied. The experiments included tensile tests, flexural tests, notched Izod impact tests, TGA, DSC and SEM. The modulus and yield stress of the composites increased with CaCO₃ particles loadings. This increase was attributed to the bonding between the particles and the PEEK matrix, as can be proved by the SEM pictures of tensile fracture surface of the composites. The impact strength of the composites was modified by the SPEEK coated on the CaCO₃ particle surface. DSC experiments showed that the particle content and surface properties influenced the glass transition temperature (T_g) and melting temperature (T_m) of the composites. The T_g increased with the content of fillers while T_m decreased. In this study the fillers treated were found to give better combination properties, which indicated that SPEEK played a constructive role in the CaCO₃/PEEK composites.     

Effects of thiol-ene click reaction on morphology and electro-optical properties of polyhedral oligomeric silsesquioxane nanostructure-based polymer dispersed liquid crystal film

Polymer dispersed liquid crystals (PDLCs) have lit a flash of interest due to the distinctive property of electrically controlled switching. However, too high-driving voltage associated with porous polymer networks always limit their wider range of applications. Herein, we reported a PDLC system containing LCs, 2,2′-(Ethylenedioxy)diethanethiol (DET) with thiol groups, cage-like nanostructure acrylic polyhedral oligomeric silsesquioxane (KH570-POSS) and KH570-SiO₂ nanoparticle modified by acrylic groups. The cage-like KH570-POSS microstructure was injected to the polymer matrix when KH570-POSS reacted with DET via thiol-ene click reaction. The morphological results demonstrated that the droplet size increased with the higher content of DET due to the decrease of the crosslink between the acrylic groups in KH570-POSS, which results in a less dense of polymer network and thus make the LC droplets easier to be driven in the electric filed. Then, a silica-based nanoparticle KH570-SiO₂ modified by acrylic groups was introduced into the system. The results indicated that KH570-SiO₂ could replace partial KH570-POSS to form the polymer network via thiol-ene click reaction, which increased the compatible ability of SiO₂ nanoparticles in the as-made film. The contrast ratio was increased to 165 when there was nearly 5 wt% content of KH570-SiO₂. Besides, the driving voltage was reduced by almost 60% and the sample could be fully driven by 30 V which is lower than the safe voltage (36 V). This study opens a route for the preparation of commercial PDLC films by thiol-ene click reaction, enabling the creation of low-voltage-driven smart windows.     

Solid mechanochemical preparation of core‐shell SiO2 particles and their improvement on the mechanical properties of PVC composites

In this article, a solid mechanochemical route to prepare core‐shell structured particles was introduced. X‐ray photoelectron spectrum, transmission electron microscope and dissolving experimental results indicated the formation of [(inorganic particle)/(elastomer)] core‐shell structured particles. The thermal stable experiments showed that untreated SiO₂ can cause dehydrochlorination of poly(vinyl chloride) (PVC) and discoloration of PVC/SiO₂ composites and the formation of core‐shell structured SiO₂ particles will improve the thermal stability of PVC/SiO₂ composites. The mechanical properties and rheological results showed that the formation of core‐shell structured SiO₂ particles can both improve the mechanical and processing properties of PVC/SiO₂ composite. ACR in PVC/(SiO₂‐PMMA‐ACR) composites acted not only as toughener for PVC matrix but also as cushion breaker if the content of ACR is enough. Meanwhile compared with other SiO₂ particles the formation of core‐shell structured SiO₂ particles can decrease the apparent viscosity, increase the critical shear rate and improve the appearance of extrudes of PVC/SiO₂ composites. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 938–948, 2008     

Functionalized reduced graphene oxide/epoxy composites with enhanced mechanical properties and thermal stability

One-pot hydrothermal reduction of graphene oxide (GO) in N-methyl-2-pyrrolidone (NMP) suspension was performed, wherein GO surface were functionalized by free radicals generated from NMP molecules. The NMP functionalized reduced GO (NMPG) nanosheets were then incorporated into epoxy matrix to prepare epoxy composites. The significant improvement of 100 and 240% in fracture toughness (critical intensity factor, K_IC) and fracture energy (critical strain energy release rate, G_IC) achieved from single edge notched bending (SENB) test revealed the excellent toughening ability of NMPG. The improved compatibility and interfacial interaction between the epoxy matrix and NMPG yielded∼28, 19 and 51% improvement in tensile strength, Young's and storage modulus, respectively. Thermal stability of pure epoxy and its composites was determined at 5, 10 and 50% weight loss, which showed 30, 27.5 and 29 °C improvement with 0.2 wt% NMPG loading. The work provides a simple method to prepare graphene-based epoxy composites with improved performance.     

Comparative study on the effect of partial replacement of silica or calcium carbonate by bentonite on the properties of EPDM composites

The effects of the partial replacement of silica or calcium carbonate (CaCO₃) by bentonite (Bt) on the curing behaviour, tensile and dynamic mechanical properties and morphological characteristics of ethylene propylene diene monomer (EPDM) composites were studied. EPDM/silica/Bt and EPDM/CaCO₃/Bt composites containing five different EPDM/filler/Bt loadings (i.e., 100/30/0, 100/25/5, 100/15/15, 100/5/25 and 100/0/30 parts per hundred rubber (phr)) were prepared using a laboratory scale two-roll mill. Results show that the optimum cure (t₉₀) and scorch (t_S2) time decreased, while the cure rate index (CRI) increased for both composites with increasing Bt loading. The tensile properties of EPDM/CaCO₃/Bt composites increased with the replacement of CaCO₃ by Bt from 0 to 30 phr of Bt. For EPDM/silica/Bt composites, the maximum tensile strength and E_b were obtained at a Bt loading of 15 phr, with enhanced tensile modulus on further increase of Bt loading. The dynamic mechanical studies revealed a strong rubber-filler interaction with increasing Bt loading in both composites, which is manifested by the lowering of tan δ at the glass transition temperature (Tg) for EPDM/CaCO₃/Bt composites and tan δ at 40 °C for EPDM/silica/Bt composites. Scanning electron microscopy (SEM) micrographs proved that incorporation of 15 phr Bt improves the dispersion of silica and enhances the interaction between silica and the EPDM matrix.     

Preparation and characterization of modified graphite oxide/poly(propylene carbonate) composites by solution intercalation

Modified graphite oxide (MGO)/Poly (propylene carbonate) (PPC) composites with excellent thermal and mechanical properties have been prepared via a facile solution intercalation method. An intercalated structure of MGO/PPC composites was confirmed by X-ray diffraction and scanning electron microscope. The thermal and mechanical properties of MGO/PPC composites were investigated by thermal gravimetric analysis, differential scanning calorimetric, dynamic mechanical analysis, and electronic tensile tester. Due to the nanometer-sized dispersion of layered graphite in PPC matrix and the strong interfacial interaction between MGO and PPC, the prepared MGO/PPC composites exhibit improved thermal and mechanical properties in comparison with pure PPC. Compared with pure PPC, the MGO/PPC composites show the highest thermal stability and the T_g is 13.8 °C higher than that of pure PPC, while the tensile strength (29.51 MPa) shows about 2 times higher than that of pure PPC when only 3.0 wt.% MGO is incorporated. These results indicate that this approach is an efficient method to improve the properties of PPC.     

Mechanical properties of oriented polyvinylchloride composites filled with ultrafine particles

The tensile stress-strain behaviour of undrawn and drawn polyvinylchloride (PVC) composites filled with ultrafine SiO₂ and micron sized glass particles were discussed as functions of filler content and size. For the undrawn PVC composites filled with ultrafine SiO₂ particles, Young's moduli, yield and breaking stresses increased with filler content and decreasing filler size. Whereas for the composites filled with micron sized glass particles, their Young's moduli slightly increased with filler content but both the yield and breaking stresses decreased. Oriented PVC composites were made by uniaxially drawing to × 2.5 at 100 °C. Anisotropic mechanical properties of oriented specimens were discussed in terms of compliance tensor and yield stress measured in the direction of 0°, 45° and 90° to the original stretching direction at room temperature. In the case of 70A SiO₂, all the compliance decreased with filler content, whereas those of 65μ glass, this relation was reversed. The yield stress of the oriented PVC composites showed filler size dependence similar to Young's moduli. The anisotropic yield stress of oriented PVC composites were reasonably analysed by Hill's yield criterion.     

The absorption and thermal behaviors of PET-SiO2 nanocomposite films

In this paper, to improve properties of Poly(ethylene terephthalate) (PET) in thermal stability and barrier to water, the films of PET, PET with micronmeter Silica/Polystyrene (SiO₂/PS) composites (SPET) and PET with nano-SiO₂/PS composites (SNPET) are prepared and their water absorption and thermal stable behaviors are investigated.In the samples, silica load is optimized as 2 wt%, at which silica not only disperses well but also forms the tough morphology in PET as investigated by SEM. The nanoeffect and thermal degradation behaviors of SNPET are firstly presented.The water absorption experiments for the samples show that the maximum absorption water weight percentage (C_∞) and the pseudo-diffusion coefficient (D) of water reduce with SiO₂ particle size varying from 440 nm to 40 nm, and the barrier property to water of SNPET is superior to those of pure PET and SPET. At the minimum silica size of 40 nm, the C_∞ and D of SNPET approach the minimum values that are 0.946% and 7.075 × 10⁻¹³ m² s⁻¹, respectively. Fixing SiO₂ size at 40 nm, with un-modified SiO₂ and modified SiO₂, the core-shell SiO₂/PS nanocomposite particles are more effective on keeping PET from absorbing water. With the increase in nano-SiO₂ load, the C_∞ and D of SNPET films reduce, proving that the nano-SiO₂ particles can inhibit water absorption. When amorphous SNPET films are annealed at 130 °C, their C_∞ and D quickly decrease with the increase in annealing time, stating that the crystallized SNPET also retards the water absorption or diffusion in PET. Under oversaturated oxygen atmosphere, the C_∞ and D of amorphous PET and SNPET, and crystallized SNPET samples are higher than those of corresponding samples without flowing oxygen, showing that oxygen promotes the films to absorb water.TGA results show that SNPET keeps similar thermal degradation behavior under the conditions of with and without both water and oxygen. But SNPET is more thermally stable than PET.     

Design of TiO2@graphene nanosheets with rough surface and its reinforcement to polyarylene ether nitriles

The interfacial interaction is extremely important when dealing with filler‐reinforced polymer materials. Herein, in order to improve the interfacial interaction with the polyarylene ether nitriles (PEN) matrix, a three‐dimensional rough structure was designed. First, needle‐like TiO₂ nanocrystals were grown on each surface of the graphene. Morphology analysis proved that rough TiO₂ nanocrystals were coated on the graphene nanosheets. Then, TiO₂@graphene/PEN composites were fabricated to investigate the filler–matrix interaction. Thereafter, the different polymer chains could be interlocked by the TiO₂ “needles” when the rough TiO₂@graphene was embedded into the polymer resin. The surrounding PEN polymer chains (work as ropes) could tie to the “needles” (work as wood pile). That is to say, the effective polymer chain length was greatly lengthened, resulting in the improvement of interfacial interactions and mechanical properties. Most importantly, the morphology, mechanical and rheological tests of the composites also proved the improvement of interfacial interactions and mechanical properties. Copyright © 2015 John Wiley & Sons, Ltd.     

Combined effect of pH level and surface treatment of Sm2O3, SmBO3 and ATO particles on cure,mechanical and electric properties of EPDM composites

The aim of this study is to investigate the effect of pH level and surface treatment of samarium oxide (Sm₂O₃), samarium borate (SmBO₃) and Sb-doped SnO₂ (ATO) particles on properties of peroxide-cured ethylene–propylene–diene rubber (EPDM) composites. The bis-(-3-(triethoxysilyl)propyl)tetra-sulfide (KH845-4) treated particles were added to EPDM at various filler contents. The pH values of particles, and cure, mechanical and electric properties of the EPDM composites were evaluated. It was found that alkaline SmBO₃ particles would accelerate cure by producing more radicals from dicumyl peroxide (DCP), but acidic ATO particles would retard vulcanization because of making DCP generate less radicals, and neutral Sm₂O₃ particles did not affect the cure process. Moreover, sulfuric linkages from KH845-4 on the filler surface would provide sulfuric radicals to form S–C linkages. Therefore, composites with SmBO₃ exhibited excellent mechanical properties. Additionally, polar fillers could reduce electrical properties of composites due to increased composite polarity.     

Effect of acrylic polymer and nanocomposite with nano-SiO2 on thermal degradation and fire resistance of APP-DPER-MEL coating

Acrylic nanocomposite and flame retardant coatings with different acrylic polymers were prepared. The effect of molecular structure and molecular weight of acrylic resins and nanocomposite with nano-SiO₂ on the interaction and char formation of ammonium polyphosphate-dipentaerythritol-melamine (APP-DPER-MEL) coating was investigated using differential thermal analysis (DTA), thermogravimetry (TG), Limiting Oxygen Index (LOI), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and fire protection test. The interaction of APP, DPER, MEL and 3F-1 acrylic resin led to the formation of intumescent coherent char at 300-450 °C. Owing to low molecular weight and lack of benzene rings, F-963 acrylic resin decomposed at lower temperature than APP, and hence their endothermic interaction was destroyed. The well-distributed nano-SiO₂ particles in acrylic nanocomposite could modify char formation and anti-oxidation of char structure at high temperature. It is noted that the fire protection properties of nanocoating with acrylic nanocomposite were better than those of flame retardant coatings with conventional acrylic resins.     

MMA接枝改性PVC/CaCO3纳米复合材料的力学性能

采用熔融共混法制备PMMA接枝改性纳米CaCO3增韧PVC（PVC/CaCO3）复合材料,并研究了复合材料的力学性能.结果表明,通过表面PMMA的接枝改性,可以显著提高纳米CaCO3增韧聚氯乙烯复合材料的拉伸强度和拉伸模量,在纳米CaCO3颗粒表面PMMA包覆层厚度为2nm时,复合材料的拉伸强度和拉伸模量达到极大值.对比于未处理纳米CaCO3和钛酸酯偶联剂处理纳米CaCO3,PMMA接枝改性纳米CaCO3增韧PVC复合材料的拉伸强度得到较大幅度提高.SEM显示,经过PMMA接枝改性后的碳酸钙在PVC基体中分散均匀,与基体界面结合良好.     

Acrylic emulsifier-free emulsion polymerization containing hydrophilic hydroxyl monomer in the presence or absence of nano-SiO2

The acrylic emulsifier-free emulsion polymerization containing hydrophilic hydroxyl monomer (23 wt.%) in the presence or absence of nano-SiO₂ particles was studied. The effects of reaction temperature, level of nano-SiO₂, variation of core monomer composite on the coagulum, particle size and monomer conversion were investigated. Transmission electron microscopy (TEM) was used to observe the particle morphology in the presence of nano-SiO₂ particles. It showed that the systems produced larger size of particles than that with emulsifier, and the addition of nano-SiO₂ particles increased the particle size but decreased the coagulum. When polymerization temperature rose from 65 °C to 80 °C, the coagulum produced decreased greatly irrelative of the existence of nano-SiO₂, and the particle size decreased with nano-SiO₂ but increased without nano-SiO₂. The increase of level of acrylic acid (AA) and 2-hydroxyethyl methacrylate (HEMA) in core monomer composite all decreased particle sizes; furthermore, the level of AA had more efficiency than the level of HEMA irrespective of the existence of nano-SiO₂ particle.