Synthesis of Specially Designed Adhesion Promoter for Grafting Polypyrrole

Summary: Adhesion of conducting polymers to the metal/metal oxide surfaces is not strong. An attempt was made to modify these reactive metal surfaces by N-derivatised pyrroles. ω-(pyrrol-1-yl alkyl) phosphonic acids with different chain lengths were successfully synthesized and characterized. These derivatives were studied for their adsorption and self-assembling phenomena onto Ti/TiO₂, Ta/Ta₂O₅ and Al/Al₂O₃. Various analytical tools were used to characterize the modified surface. Contact angle measurements indicated an increase in hydrophobicity after adsorption that was further confirmed by Surface Plasmon Resonance (SPR). X-ray Photoelectron Spectroscopy (XPS) studies showed that the molecules are oriented in a fashion such that phosphonic acid group is attached to the metal surface and pyrrole is pointing away from the surface. The oxidation potential of these derivatives was higher than pyrrole as expected. Surface polymerisation was successfully attempted on the modified metal substrates. The polymerised surface was examined under Scanning Electron Microscope (SEM). The new compounds not only function as self-assembling molecules, they also exhibit a new class of reactive functionalized derivatives that can be used as monomers for polymerisation.     

Mesoporous Ga-MCM-41 as support for metallocene catalysts: Acidity–activity relationship

Several Ga-MCM-41 materials, prepared using different synthesis and template removal procedures, were used for the immobilisation of Cp₂ZrCl₂ by a direct impregnation method. Supports were carefully characterised by XRD, N₂ adsorption, ICP-AES, AAS, XPS and FTIR (using pyridine as probe molecule for acid sites), in order to assess their structural features, chemical composition (bulk and surface) and surface acidity properties.Supported catalysts were tested for the polymerisation of ethylene, using methylaluminoxane (MAO) as cocatalyst/activator. The relationships established between concentration/strength of acid sites of Ga-MCM-41 and the catalytic performance of zirconocene dichloride supported in these materials demonstrate that the behaviour of the catalytic systems analysed in this paper is compatible with existing models for the interaction of single-site olefin polymerisation catalysts with other inorganic acidic oxides.     

Influence of alkyl tail length on self-organisation of side-chain liquid crystalline polymers with biphenyl hemiphasmidic mesogens

A new and simple series of side-chain liquid crystalline polymethacrylates containing biphenyl hemiphasmidic mesogens based on 4-[(3,4,5-trialkan)-1-carbonylbenzoate]biphenyl (denoted as PT_mBMA, m = 6, 8, 10, 12, 14, 16, 18, m refers to the carbon number of alkoxy tails) groups was designed and successfully synthesised via free radical polymerisation. The phase structures and transitions of the polymers were investigated by the combination of techniques including differential scanning calorimetry, polarizing microscope, one-dimensional/two-dimensional wide-angle X-ray diffraction, and small-angle X-ray scattering. The experimental results revealed that the liquid crystalline phase structures and behaviours of the polymers were found to be strongly dependent on the alkyl tail length (m). When m = 6, the PT_mBMA formed a stable smectic phase above T_g. When m = 8, 10, 12, 14, 16, 18, the sample presented a hexagonal columnar mesophase (Φ_h), suggesting that the alkyl length has played an important role in the phase behaviours of hemiphasmidic side-chain liquid crystalline polymers.     

Synthesis and characterisation of star-shaped liquid crystalline polymer with a POSS core

The star-shaped POSS-graft-LCP with POSS as the core and liquid crystal polymer, poly{6-(4?-octyloxyphenyl-4″-benzoyl)hexyl acrylate}, as arms was prepared by atom transfer radical polymerisation technique using octa(3-chloropropyl) polyhedral oligomeric silsesquioxane [POSS-(CH₂CH₂CH₂Cl)₈] as initiator. For comparison, the linear liquid crystal polymer, poly{6-(4?-octyloxyphenyl-4″-benzoyl)hexyl acrylate} (LLCP), was obtained by conventional radical polymerisation. Both liquid crystal polymers were characterised by FT-IR, ¹H NMR, ¹³C NMR, gel permeation chromatography, thermogravimetric analysis, differential scanning calorimetry, polarised optical microscopy and X-ray diffraction analysis. The liquid crystal phase behaviour research demonstrated that both liquid crystal polymers were reversible thermotropic nematic liquid crystal materials. The number of polymerisation degree of every arm attached on POSS in POSS-graft-LCP impacted greatly on the liquid crystal properties and only a small one was necessary for it to exhibit a broad liquid crystal range. Results further demonstrated that the special star-shaped topology of POSS and the eight arms attached helped POSS-graft-LCP form and stabilise liquid crystal phase easily. This research may further expand the way to star-shaped LCPs by employing a variety of (meth)acrylate and other vinyl liquid crystalline monomers.     

Well-defined crosslinked materials via ring opening metathesis polymerisation

The work reported here is part of our ongoing programme of work directed. towards the synthesis and characterisation of polymeric materials via ROMP-RIM and ROMP-RTM. It describes the synthesis and characterisation of well-defined linear and crosslinked polymeric materials via ROMP-RTM. The process involves in-mould polymerisation of monofunctional imidonorbornene monomers, with different alkyl side chain lengths, to give a range of linear polymers. The process also involves in-mould copolymerisation of monofunctional imidonorbornene monomers, with different alkyl side chain lengths and difunctional monomers with different alkylene spacer lengths, to produce well-defined crosslinked polymers. The glass transition temperature (T_g) of the linear polymers was found to depend on the length of the alkyl side chain. For the crosslinked materials the results show that as the percentage of the difunctional, crosslinking unit, is increased (1, 5 and 10 molar percentage of the difunctional monomer) the glass transition shifts to a higher temperature, the height of the tanδ peak decreases and the plateau shear modulus above T_g increases. These results are as expected for an increase in the crosslink density of a polymer.     

Optimization of Mn-Mg-Al Mixed Oxides Composition on their Activity towards the Total Oxidation of Aromatic and Oxygenated VOCs

A series of mixed oxides (Mn-Mg-Al) is prepared by coprecipitation via a hydrotalcite route with different manganese ratios. Structural, textural, and redox properties are studied by XRD, N₂-sorption, H₂-TPR, and XPS techniques. Mn_xMg_6-xAl₂-O mixed oxides (with 0≤x≤6) are tested in the total oxidation of ethanol and toluene, two probe molecules representing respectively oxygenated and aromatic VOCs. Catalysts with higher manganese contents have shown the best catalytic performance for the oxidation of both ethanol and toluene. The surface activity of the materials is mainly related to the presence of manganese species in three different oxidation states (+II, +III, and +IV) in the bulk and on the material's surface. Since high Mn-content catalysts showed similar physicochemical properties and catalytic activity, Mn₄Mg₂-O is selected as the optimal composition of these materials. Furthermore, its aging test is compared to that of noble metal-based commercial catalysts (Pd/γ-Al₂O₃).     

Structure‐controlled synthesis of novel soluble and thermally stable poly (aryl ether nitrile ether ketone ketone)/poly (aryl ether nitrile ether ketone biphenyl ketone) copolymers by electrophilic polycondensation

One new synthesis route was first designed to synthesize the biphenyl acid chloride (BPACl), and then a series of novel poly (aryl ether nitrile ether ketone ketone) (PENEKK)/poly (aryl ether nitrile ether ketone biphenyl ketone) (PENEKBK) copolymers with different controlled structure compositions were synthesized by electrophilic polycondensation and varying the molar ratio of BPACl to terephthaloyl chloride (TPC). The obtained PENEKK/PENEKBK copolymers were characterized by different physical and chemical techniques. The results showed, the copolymers with 10–50% molar contents of biphenyl moities exhibited good thermal properties with glass transition temperatures (T_gs) of 184–196°C, decomposition temperatures (T_ds) of 498–515°C, and good solubility in organic solvents (N‐Methyl‐2‐pyrrolidone (NMP), N,N‐dimethylformamide (DMF), and DMSO), indicating that they would have good potential for solvent processing. The thin films of the polymers had tensile strengths of 93.6–101.5 MPa, Young's moduli of 3.03–3.32 GPa, elongations at break of 9–14%, indicating they were strong materials. The densities of the obtained polymers were 1.31–1.40 g/cm^?3, which were far lower than those of some main inorganic materials (such as Fe, nearly 7.8 g/cm^?3), indicating that they would have possible potential for substituting some inorganic materials used as high temperature materials in some areas due to the merits of lightweight. Thus, the copolymers with 10–50% molar contents of biphenyl moities were promising polymer materials. Copyright © 2010 John Wiley & Sons, Ltd.     

XPS characterisation of core-shell silica-polymer composite particles synthesised by atom transfer radical polymerisation in aqueous media

Near-monodisperse, siloxane-functionalised silica particles are used as a colloidal substrate for the surface-initiated polymerisation of various hydrophilic methacrylates: oligo(ethylene glycol) methacrylate (OEGMA), 2-(N-morpholino)ethyl methacrylate (MEMA), and ammonium 2-sulfatoethyl methacrylate (SEM) by atom transfer radical polymerisation in aqueous media at room temperature. The bulk and surface compositions of the resulting composite particles were assessed using various techniques. Thermogravimetric analysis of the resulting silica-polymer composites indicated polymer loadings of 5.4-8.6%, depending on the nature, structure and target degree of polymerisation (D_p). Dynamic light scattering studies indicate increases in hydrodynamic diameter of 14-87 nm compared to the reference silica particles. FT-IR spectroscopy confirmed additional features characteristic of the carbonyl group and pendant end-chain functionalities of the methacrylic polymer chains. The elemental and chemical surface compositions of the initial silica particles and final polymer-grafted composite particles were extensively investigated by X-ray photoelectron spectroscopy (XPS). The composite particles had appreciably higher C/Si atomic ratios, compared to the original initiator-functionalised silica particles, and these ratios increased with increasing target D_p. In addition, close inspection revealed that the relative intensities of the various components of the peak-fitted C1s envelopes varied significantly, depending on the target degree of polymerisation and the chemical structure of the methacrylic monomer. Moreover, in the case of the MEMA and SEM polymerisations, new nitrogen (MEMA) and sulfur (SEM) XPS signals were detected. This XPS study confirmed the presence of a thin outer layer of grafted polymer chains surrounding the silica particles.     

Spectroelectrochemical characterisation of poly[Ni(saltMe)]-modified electrodes

Electrogenerated polymers based on the nickel(II) complex 2,3-dimethyl-N,N'-bis(salicylidene)butane-2,3-diaminatonickel(II), poly[Ni(saltMe)], were characterised by in situ FTIR and UV/Vis spectroscopy and ex-situ EPR spectroscopy in order to gain insights into film structure, electronic states and charge conduction. The role of the nickel ions during film oxidation was probed by using EPR to study naturally abundant Ni and 61Ni-enriched polymers. The data from all the spectroscopic techniques are consistent, and clearly indicate that polymerisation and redox switching are associated with oxidative ligand based processes; coulometry suggests that one positive charge was delocalised through each monomer unit. EPR provided evidence for the non-direct involvement of the metal in polymer oxidation: the polymer is best described as a polyphenylene-type compound (conducting polymer), rather than an aggregation of nickel complexes (redox polymer), and the main charge carriers are identified as polarons. An explanation for the high electrochemical stability and conductivity of poly[Ni(saltMe)] with respect to that of poly[Ni(salen)] is proposed. based on stereochemical repulsion between monomeric units; this can impose a less compact supramolecular structure on polymers with bulkier substituents.     

Characterization and comparison of poly(aryl ether ketone)s containing dibenzoylbiphenyl moieties: Effects of changes in biphenyl substitution pattern on thermal and mechanical properties

A monomer, 3,3′-bis (4-fluorobenzoyl) biphenyl, was prepared in high yield in two steps from inexpensive 3-chlorobenzoyl chloride and fluorobenzene, and polymerized by nucleophilic displacement reaction with various bisphenol monomers in tetramethylene sulfone to produce a series of high molecular weight poly(aryl ether ketone)s containing 3,3′-dibenzoylbiphenyl (DBBP) moieties. The spectroscopic, thermal, and thermomechanical properties of these polymers and related isomeric polymers having 2,2′-and 4,4′-DBBP units were determined and compared to study the effects of changes in the substitution pattern of the biphenyl unit. Except for the 2,2′-DBBP series of polymers, T_gs were found to increase with increasing linearity of the DBBP unit. The 2,2′-DBBP series of polymers had exceptionally high T_gs due to the sterically restricted motions in the biphenyl unit caused by the 2,2′-substitution. In addition, they also showed evidence for torsion with the 2,2′-DBBP unit, whereas in other isomeric polymers the DBBP units are believed to be relatively coplanar. Thermal stabilities and tensile moduli for these polymers proved to be independent of substitution patterns. © 1995 John Wiley & Sons, Inc.     

Pd‐Catalysed Direct Arylation Polymerisation for Synthesis of Low‐Bandgap Conjugated Polymers and Photovoltaic Performance

Low‐bandgap conjugated copolymers based on a donor–acceptor structure have been synthesised via palladium‐complex catalysed direct arylation polymerisation. Initially, we report the optimisation of the synthesis of poly(cyclopentadithiophene‐alt‐benzothiadiazole) (PCPDTBT) formed between cyclopentadithiophene and dibromobenzothiadiazole units. The polymerisation condition has been optimised, which affords high‐molecular‐weight polymers of up to M _n = 70 k using N‐methylpyrrolidone as a solvent. The polymers are used to fabricate organic photovoltaic devices and the best performing PCPDTBT device exhibits a moderate improvement over devices fabricated using the related polymer via Suzuki coupling. Similar polymerisation conditions have also been applied for other monomer units.     

Main-chain biodegradable liquid crystal derived from cholesteryl derivative end-capped poly(trimethylene carbonate): synthesis and characterisation

Main-chain biodegradable liquid crystal derived from cholesteryl derivative end-capped poly(trimethylene carbonate) was investigated. The novel liquid crystal was synthesised via ring-opening polymerisation of trimethylene carbonate initiated by cholesteryl derivative with an alkyl spacer and end primary hydroxyl group, without any catalyst. The chemical structure of resulting polymers was verified by ¹H NMR. Liquid crystalline properties were validated by X-ray diffraction, differential scanning calorimetry, and polarising optical microscopy. The results showed that all the synthesised polymers Chol-(CH₂)₂-(TMC)_n exhibited mesomorphism in particular temperature ranges because of the introduction of the cholesteryl derivative moiety.     

Preparation and characterization of palladium immobilized on silica‐coated Fe3O4 and its catalytic performance for Suzuki reaction under microwave irradiation

Supported palladium catalyst (Pd/Fe₃O₄@SiO₂) was easily prepared by supporting PdCl₂ on silica‐coated magnetic nanoparticles Fe₃O₄ in ethylene glycol. The as‐prepared sample was characterized by infrared spectroscopy (IR), X‐ray diffraction (XRD) and X‐ray photoelectron spectrometer (XPS). The formation of active specie Pd(0) was confirmed by XRD and XPS, and the Pd loading for the fresh and recovered catalyst was determined by atomic absorption spectroscopy (AAS). Pd/Fe₃O₄@SiO₂ was employed for the synthesis of biphenyl derivatives via Suzuki reaction. In terms of the yield of biphenyl, the supported catalyst displayed nearly equal catalytic performance to that of homologous PdCl₂ under microwave irradiation for 30 min but higher than that obtained by traditional heating method for 12 h. The catalytic performance of Pd/Fe₃O₄@SiO₂ for Suzuki reactions involving various aryl halides and arylboronic acids were also examined. Impressive yield of biphenyl at 68.2% was obtained even in the presence of unreactive aryl chlorides. Pd/Fe₃O₄@SiO₂ was recovered by a permanent magnet and directly reused in the next run, and no obvious deactivation was observed for up to 6 times. Copyright © 2016 John Wiley & Sons, Ltd.     

Oxidation of formic acid on platinum electrodeposited on polished and oxidized glassy carbon

Formic acid oxidation at platinum electrochemically deposited on polished (GC/Pt) and oxidized glassy carbon (GC_ox/Pt) was examined with the objective of studying the effect of electrochemical treatment of the support on deposition of platinum and on the activity of Pt catalyst. The electrodes were characterised by STM and XPS techniques. The oxidative treatment of the support leads to deposition of smaller Pt particles in comparison with the one on the polished substrate. The XPS spectra indicated the increased fraction of functional (acidic) groups on the treated support as well as the higher fraction of oxygen containing species on Pt catalyst deposited on oxidised referring to Pt deposited on polished substrate.The activity of GC_ox/Pt electrode is increased by the factor of 2–4 for formic acid oxidation compared to the activity of GC/Pt electrode. This result is explained by the oxidative removal of CO_ad species leading to enhanced amount of Pt free sites available for direct formic acid oxidation to CO₂.     

Bis allyl benzoxazine: Synthesis, polymerisation and polymer properties

A bis benzoxazine monomer with allyl groups viz: 2,2′-bis (8-allyl-3-phenyl-3,4-dihydro-2H-1,3-benzoxazinyl) propane (Bz-allyl) was synthesized via a solventless method from 2,2′diallyl bisphenol-A, paraformaldehyde and aniline. The chemical structure of Bz-allyl was confirmed by FTIR, ¹H NMR and ¹³C NMR analyses. The monomer manifested a two-stage thermal polymerisation pattern. The first stage was attributed to the polymerisation of the allyl groups and the second to the ring - opening polymerisation of benzoxazine moiety. The polymerisation profile was investigated with DSC, FT-IR, TGA and pyrolysis-GC techniques. A polymerisation mechanism involving the electrophilic addition of the propagating iminium cation on the aniline ring in lieu of the activated sites of bisphenol-A, (which are blocked by allyl and alkyl substituents) was proposed. Additional cross-linking was provided by thermal addition polymerization of allyl groups. As a result of altered cross-linking via the aniline moiety and the additional cross-linking via allyl groups, the cured polymer exhibited a T_g of ca. 300 °C and high crosslink density. The thermal stability of this polymer was also substantially higher vis-à-vis that of the bisphenol-A based polybenzoxazine. The work focuses on the manipulation of benzoxazine monomer structure to alter the ring-opening polymerisation mechanism and cross-linking to derive polybenzoxazine with improved properties.     

A comparative study of 9,9-bis(4-aminophenyl)fluorene polymers prepared by catalytic and non-catalytic oxidative polymerisation methods

9,9-Bis(4-aminophenyl)fluorene (APF) polymers were synthesized by two different pathways. The different synthetic routes gave polymers with different structures. FT-IR and NMR studies revealed that the catalytic oxidative polymerisation of APF in acetonitrile produced P2, whereas oxidative polymerisation of APF in aqueous alkaline media gave P3. The effects of these different techniques on spectral, thermal, optical, electrical, electrochemical, and morphological properties of resulting polymers were investigated.     

Synthesis and polymerisation of α,ω-bis(3-pyrrolyl)alkanes

The synthesis, characterisation and polymerisation studies of a homologous series of α,ω-bis(pyrrolyl)alkanes are described. These α,ω-bis(pyrrolyl)alkanes were produced using Friedel-Crafts acylation followed by reduction of the carbonyl group using Red-Al^®. Chemical polymerisation of the resultant dimers using FeCl₃ produced poly(α,ω-bis(pyrrolyl)alkane) films, which were characterised by SEM, FTIR and tested for conductivity.     

A Nano‐Fibrillated Mesoporous Carbon as an Effective Support for Palladium Nanoparticles in the Aerobic Oxidation of Alcohols “on Pure Water”

A novel nano‐fibrillated mesoporous carbon (IFMC) was successfully prepared via carbonization of the ionic liquid 1‐methyl‐3‐phenethyl‐1H‐imidazolium hydrogen sulfate ( 1 ) in the presence of SBA‐15. The material was shown to be an efficient and unique support for the palladium nanoparticle (PdNP) catalyst Pd@IFMC ( 2 ) in aerobic oxidation of heterocyclic, benzylic, and heteroatom containing alcohols on pure water at temperatures as low as 40 °C for the first time and giving almost consistent activities and selectivities within more than six reaction runs. The catalyst has also been employed as an effective catalyst for the selective oxidation of aliphatic and allylic alcohols at 70–80 °C. The materials were characterized by X‐ray photoelectron spectroscopy (XPS), N₂ adsorption–desorption analysis, transmission electron microscopy (TEM), and electron tomography (ET). Our compelling XPS and ET studies showed that higher activity of 2 compared to Pd@CMK‐3 and Pd/C in the aerobic oxidation of alcohols on water might be due to the presence of nitrogen functionalities inside the carbon structure and also the fibrous nature of our materials. The presence of a nitrogen heteroatom in the carboneous framework might also be responsible for the relatively uniform and nearly atomic‐scale distribution of PdNPs throughout the mesoporous structure and the inhibition of Pd agglomeration during the reaction, resulting in high durability, high stability, and recycling characteristics of 2 . This effect was clearly confirmed by comparing the TEM images of the recovered 2 and Pd@CMK‐3.     

Synthesis of multi-arm-star polyglycidols of different architecture grafted with polyacrylate side arms

Well defined linear and 3-, 4-, and 6-arm-star shaped polyglycidols were obtained via anionic ring-opening polymerisation of ethoxyethyl glycidyl ether using 3-phenyl-1-propanol, trimethylolpropane, di(trimethylolpropane, and dipentaerythrite as initiator followed by the removal of the acetal protection group via acid catalysed hydrolysis. The microstructure and architecture of the polymers was proven by NMR spectroscopy, size exclusion chromatography and MALDI-TOF-MS. Multifunctional initiators for the atom transfer radical polymerisation were obtained by esterification of the hydroxyl groups of the polyglycidols with α-bromoisobutyryl bromide. Kinetic studies of the ATRP of tert-butyl acrylate and methyl acrylate revealed a controlled synthesis of linear and multi-arm-star polyglycidols of different architecture grafted with polyacrylate side arms.     

Role of surface hydroxyl groups in promoting room temperature CO sensing by Pd-modified nanocrystalline SnO2

SnO₂/Pd nanocomposites were synthesized via sol-gel method followed by variable processing procedures. The materials are sensitive to CO gas in the concentration range 2-100 ppm at room operating temperature. It was shown that modification of nanocrystalline tin dioxide by Pd changes the temperature dependence of sensor response, decreasing the temperature of maximal signal. To understand the mechanism of room temperature CO sensitivity, a number of SnO₂/Pd materials were characterized by XRD, TEM, BET, XPS and TPR techniques. From the results of FTIR, impedance and sensing measurements under variable ambient conditions it was concluded that improvement in CO sensitivity for Pd-modified SnO₂ is due to alteration of CO oxidation pathway. The reaction of CO with surface OH-groups at room temperature was proposed, the latter being more reactive than oxygen species due to the possible chain character of the reactions. It was proposed that Pd additive may initiate chain processes at room temperature.