Reactive functionalization of poly(lactic acid), PLA: Effects of the reactive modifier,initiator and processing conditions on the final grafted maleic anhydride content and molecular weight of PLA

A response surface methodology (RSM) design was used to analyze the effects of maleic anhydride (MA) and 2,5-bis(tert-butylperoxy)-2,5-dimethyl hexane (Luperox or L101) content, and TSE screw speed on the degree of grafted MA (MA_g) and number average molecular weight (M_n) of maleated PLA (PLA-g-MA), which can be used as a reactive compatibilizer in production of PLA blends with various components. PLA-g-MA's FTIR peaks indicated that MA was grafted onto the PLA backbone and oligomeric MA was also present. A maximum of 0.52 wt% MA_g determined by titration was achieved at the expense of a 50% reduction of M_n and an increase in the polydispersity index to around 2.0. Generally, increasing L101 increased the degree of grafting and decreased M_n. L101 and MA_g had a large effect on the stability of PLA-g-MA's M_n during storage. Nominally, amounts of MA equal to 4.5 wt%, L101 between 0.45 and 0.65 wt%, and screw speed of 20 rpm provided the optimal conditions for grafting MA onto PLA.     

Improvement of thermal and mechanical properties of poly(L‐lactic acid) with 4,4‐methylene diphenyl diisocyanate

In this study, the thermal and mechanical properties of biodegradable poly(L ‐lactic acid) (PLA) were improved by reacting with 4,4‐methylene diphenyl diisocyanate (MDI). The resulting PLA samples were characterized with Fourier transformation infrared spectrometer (FT‐IR). The glass transition (T_g) and decomposing (T_d) temperature of the resulting products were measured using differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA), respectively. The tensile properties were also measured with a tensile tester. The results show that when the molar ratio of ? NCO to ? OH was 2:1, the T_g value can be increased to 64°C from the original 55°C, and the tensile strength increased from 4.9 to 5.8 MPa. This demonstrated that by reacting PLA with MDI at an appropriate portion, both the thermal and mechanical performance of PLA can be increased. Copyright © 2006 John Wiley & Sons, Ltd.     

Controllable synthesis of bio‐based polylactide diols using an organocatalyst in solvent‐free conditions

Controllable synthesis of bio‐based polylactide (PLA) diols was realized by the ring‐opening polymerization (ROP) of lactide (LA) in the presence of 1,4‐butanediol (BDO) using 1,8‐diazabicyclo[5.4.0]undec‐7‐ene (DBU) as an organocatalyst in solvent‐free conditions. The catalytic activity and conversion of LA could reach ∼1 kg g⁻¹ DBU and >97%, respectively, and the polymerization yielded polymers with narrow polydispersity index (PDI) (1.15–1.29). Interestingly, the number average molecular weight (M_n) of the obtained PLA diol was in excellent linear relation with the molar ratio of LA and BDO, and hence can be precisely controlled. The structure of the diol was clearly confirmed by ¹H and ¹³C NMR, FTIR, and MALDI‐TOF mass spectra, proving BDO as an initiation‐transfer agent to participate in the polymerization. Kinetic study of the ROP demonstrates a pseudo‐first‐order kinetic model and a controlled “living” nature. Notably, it is found that the glass transition temperature (T_g) of the diol significantly depends on the M_n. Furthermore, various chain transfer agents and organocatalysts can also be used to successfully synthesize well‐defined PLA diols. Especially, functional bio‐based dihydric alcohols such as 2,5‐furandimethanol (FDMO)‐initiated ROP in this system could result in fully bio‐based PLA diols with functionality. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 968–976     

Synthesis of poly[arylene ether sulfone-b-vinylidene fluoride] block copolymers

A series of α,ω-dihydroxy polyarylene sulfones (PAES) were synthesized comprising bisphenol A (PAES1, M_n=1800, 4900, and 9500 daltons), 4,4^′-biphenol (PAES2, M_n=4100 daltons), and hexafluorobisphenol A (PAES3, M_n=3300 daltons). These were reacted with α,ω-dibromo poly(vinylidene fluoride) (PVDF, M_n=1200 daltons) prepared by telomerization, to yield block copolymers possessing rigid and flexible segments. Block copolymers were characterized by FTIR, NMR, GPC, DSC, TGA and TEM. In several cases the block copolymers exhibited distinct thermal transitions, i.e. T_m and T_g for PVDF and PAES segments, respectively. Where observable, T_g of PAES domains in the block copolymers occurred at a temperature lower than the corresponding PAES homopolymer due to the flexible nature of the surrounding PVDF domains. Block copolymers exhibited a similar thermal stability to the corresponding PAES homopolymers but higher stability than the PVDF homopolymer, and much higher still than α,ω-dibromo PVDF. TEM analyses indicate that phase separation of PAES and PVDF domains occurs on the nanometer scale.     

Synthesis and characterization of thermally stable sulfonated polybenzimidazoles

A series of sulfonated polybenzimidazoles (sPBI-IS) with controlled sulfonation degrees (SDs) were synthesized from various stoichiometric ratio mixtures of 5-sulfoisophthalic acid monosodium salt (SIPN), 4,4′-sulfonyldibenzoic acid and 3,3′-diaminobenzidine by solution copolycondensation in poly(phosphoric acid). The resulting sulfonated polymers were characterized by means of FTIR, ¹H NMR and GPC, in addition to TGA and DMA. The number-average molecular weights (M_n) of the sPBI-IS are in the range of 45,500-64,000, and the polydispersity indices (M_w/M_n) vary from 1.9 to 2.4. The synthesized sPBI-IS samples present good solubilities in polar aprotic solvents and they are easy to form the transparent, flexible and tough films by solution casting. These polymer membranes show excellent thermal stabilities and dynamic mechanical properties. The thermal stability of the sodium form sPBI-IS remarkably increases with increasing SD. However, the acidic form sPBI-IS presents less thermal stability than the non-sulfonated sample (sPBI-IS0). The onset decomposition temperature (T_d) and the glass-transition temperature (T_g) of the acidic form sPBI-IS70 are 439 °C and 196 °C, respectively. The sulfonated membranes show higher storage moduli and loss moduli than sPBI-IS0. The resulting sPBI-IS membranes with high hygroscopicity show potential application as the high temperature proton exchange membrane in fuel cell.     

Segmented polyurethanes with 4,4′-bis-(6-hydroxyhexoxy)biphenyl as chain extender. Part 2. Synthesis and properties of MDI-polyurethanes in comparison with 2,4-TDI-polyurethanes

Linear segmented polyurethanes based on poly(butylene adipate)s (PBA) of different molecular weight (M_n 2000, 1000, and 600), 4,4′-diphenylmethane diisocyanate (MDI) and the mesogenic diol 4,4′-bis-(6-hydroxyhexoxy)biphenyl (BHHBP) as well as the unsegmented polyurethane consisting of MDI/BHHBP units have been synthesized and characterized by elemental analysis, ¹³C-NMR and SEC. The thermal behavior and the morphology were studied by DSC, polarizing microscopy, and DMA. The properties of the MDI-polyurethanes were discussed in relation to the BHHBP chain extended 2,4-TDI-polyurethanes and common 1,4-butanediol chain-extended MDI products. MDI polyurethanes based on PBA (M_n 2000) exhibit a glass transition temperature T_g of about −40°C independent of the hard segment content up to ∼50% hard segments. At higher hard segment contents increasing T_gs were observed. Polyurethanes, based on the shorter polyester soft segments PBA (M_n 1000 or 600), reveal an increase in the glass transition temperatures with growing hard segment content. The thermal transitions caused by melting of the MDI/BHHBP hard segment domains are found at 50 K higher temperatures in comparison with the analogous TDI products with mesogenic BHHBP/TDI hard segments. Shortening of the PBA chain length causes a shift of the thermal transitions to lower temperatures. Polarizing microscopy experiments indicate that liquid crystalline behavior is influenced by both the content of mesogenic hard segments and the chain length of the polyester. © 1996 John Wiley & Sons, Inc.     

Synthesis of hyperbranched-linear star block copolymers by atom transfer radical polymerization of styrene using hyperbranched poly(siloxysilane) (HBPS) macroinitiator

Hyperbranched-linear star block copolymers, hyperbranched poly(siloxysilane)-block-polystyrene (HBPS-b-PSt), were prepared by atom transfer radical polymerization (ATRP) of styrene in xylene, using bromoester-terminated HBPS (HBPS-Br (P3), M_n = 7500, M_w/M_n = 1.76) as a macroinitiator. The number-average molecular weights of the obtained polymers (M_n) were in the range of 21,800-60,000 and molecular weight distributions were unimodal throughout the reaction (M_w/M_n = 1.28-1.40). These polymers showed 5 wt.% decomposition temperature (T_d5) over 300 °C. The DSC thermograms of the resulting polymers indicated two glass transition temperatures (T_g). The T_g of HBPS segment shifted to higher value while the T_g of PSt segment shifted to lower value compared with those of the homopolymers. Preliminary physical characterization related to the solution viscosity of the resulting block copolymers is also reported.     

Colorless poly(ester imide)s derived from hydrogenated trimellitic anhydride

Tetracarboxylic dianhydrides were synthesized from hydrogenated trimellitic anhydride (HTA) and some diols to obtain novel poly(ester imide)s (PEsIs). The HTA-derived tetracarboxylic dianhydrides showed much higher reactivity with various diamines than conventional cycloaliphatic tetracarboxylic dianhydrides and led to PEsI precursors with high molecular weights (M_w). The results can be explained in terms of a spacer effect. The PEsI films were essentially colorless regardless of diol and diamine components owing to inhibited charge-transfer interactions. The HTA-derived PEsIs also exhibited excellent combined properties: relatively high glass transition temperatures (T_g), relatively low water absorption (W_A), and relatively low dielectric constants. The outstanding processability (thermoplasticity and solubility) observed for the HTA-derived PEsIs was discussed on the basis of a non-planar/bent structure at the HTA-based imide units. The use of a fluorene-containing diol component was effective for enhancing T_g’s by restricted internal rotation and for reducing W_A by a decreased imide group content. On the other hand, the use of 4,4′-biphenol as another diol gave rise to a prominent toughening effect without sacrificing other target properties. One of the HTA-derived PEsI systems can be a promising candidate as plastic substrates because of its excellent combined properties: a high T_g close to 300 °C, high optical transparency, significant toughness (elongation at break > 100%), and good thermo- and solution-processability.     

Thermal properties of solvolysis lignin-derived polyurethanes

Thermal properties of polyurethane (PU) films prepared from solvolysis lignin (SL), polyethylene glycol (PEG) and diphenylmethane diisocyanate (MDI) were examined by differential scanning calorimetry and thermogravimetry. In the SL—PEG—MDI system, the SL content, the molecular weight (M_n) of PEG and the NCO/OH ratio were changed in order to control the thermal properties. Glass transition temperatures (T_g's) of the prepared PU's were dependent on the SL content, the M_n of PEG and the NCO/OH ratio. However, the T_g of PU was significantly influenced by the SL content: the increment of T_g was ca. 150 K when the SL content in PEG increased from 0 to ca. 50%. The decomposition of the PU's was markedly dependent on the content of SL. Other factors, such as the NCO/OH ratio and the M_n of PEG, are less dominant compared with the SL content. This fact suggests that the dissociation between the isocyanate groups and the phenolic OH groups in SL may be the major factor in the whole process of the thermal decomposition of the PU containing SL     

In-situ changes of thermo-mechanical properties of poly(lactic acid) film immersed in alcohol solutions

Poly (lactic acid) (PLA) has properties suitable for many applications. However, PLA's properties are affected by environmental conditions. In this study, the glass-rubber transition temperatures (T_g) of PLA films were measured during immersion (i.e., in-situ) in pure alcohols and alcohol aqueous solutions using a dynamic mechanical analysis technique. The T_g of PLA decreased when immersed in alcohols. For pure aliphatic alcohols, the T_g reduction became smaller as the number of carbons (C1–C10) in the alcohol main chains increased. The Fox equation and the Hansen solubility parameters (HSP)/Flory-Huggins (FH) model were used to explain the T_g reduction. The relationships explained the interactions between PLA and pure alcohols with small molecules (C1–C8), but bigger pure alcohols (C9–C10) did not fit the prediction. The chemical isomerism in pure propanol (i.e., propan-1-ol and propan-2-ol) did not affect the T_g reduction. The T_g reduction in propan-2-ol aqueous solutions was concentration dependent although the partition coefficients based on the HSP and the FH parameters did not fit this relationship. The in-situ immersion of PLA in alcohol solutions could be used to evaluate the change in T_g from the T_g of dry PLA.     

Phenylethynylnaphthalic endcapped imide oligomers with reduced cure temperatures

A series of 4-(2-phenylethynyl)-1,8-naphthalic anhydride (PENA) endcapped imide oligomers with different chemical backbones and calculated number average molecular weights (Calc’d M_n) were successfully synthesized and characterized. The PENA-endcapped imide oligomers were mixtures of mono- and double-endcapped imide oligomers with polymerization degree (P_n) of 1-5 and number average molecular weights (M_n) of 2515-3851 g/mol. determined by GPC. Study on effect of chemical structures on the curing behaviors of two model compounds: PENA-m based on PENA and PEPA-m derived from 4-phenylethynylphthalic anhydride (PEPA) revealed that PENA-m showed the cure temperature of 50 °C lower than PEPA-m and the activity energy of thermal curing reaction for PENA-m was also lower than that of PEPA-m. The PENA-endcapped imide oligomers could be melt at temperatures of >250 °C with the minimum melt viscosity of 1.2-230 Pa s at 275-301 °C and the widen melt processing windows, along with 10-40 °C lower cure temperature than the PEPA-endcapped analogue.The PENA-endcapped imide oligomers could be thermally cured at 350 °C/1 h to afford the thermally cured polyimides with good combined thermal and mechanical properties including T_g of 344-397 °C (DMA), T_d of 443-513 °C, tensile strength of as high as 54.7 MPa, flexural strength of as high as 126.1 MPa and modulus of as high as 2.3 GPa, respectively.     

Thermal properties of polylactides

A thermal analysis of a series of polylactides (PLA) was carried out based on the number of average molecular mass (M _n), and the nature of isomer (D, L and DL). It is confirmed that the glass transition temperature (T _g) of PLA increased as a function of molecular mass irrespective of isomer type except sample with a high polydispersity index. The melting temperature (T _m) and enthalpy of crystal fusion (ΔH _f) of L-isomer increased as the M _n was increased from 1100 to 27500. The degree of crystallinity (χ_c%) increased as a function of molecular mass. However no crystallization peak was detected in the lower molecular mass range (550–1400). The non-isothermal crystallization behavior of the PLA melt was significantly influenced by the cooling rate. Both D and L isomers exhibited insignificant difference in thermal properties and DL lactides exhibited amorphous behavior at identical molecular masses. Change in microstructure showed significant difference between two isomers. Analysis of the FTIR spectra of these PLA samples in the range of 1200–1230 cm⁻¹ supported DSC observation on crystallinity.     

Biocompatibility Assessment of Polylactic Acid (PLA) and Nanobioglass (n-BG) Nanocomposites for Biomedical Applications

Scaffolds based on biopolymers and nanomaterials with appropriate mechanical properties and high biocompatibility are desirable in tissue engineering. Therefore, polylactic acid (PLA) nanocomposites were prepared with ceramic nanobioglass (PLA/n-BGs) at 5 and 10 wt.%. Bioglass nanoparticles (n-BGs) were prepared using a sol–gel methodology with a size of ca. 24.87 ± 6.26 nm. In addition, they showed the ability to inhibit bacteria such as Escherichia coli (ATCC 11775), Vibrio parahaemolyticus (ATCC 17802), Staphylococcus aureus subsp. aureus (ATCC 55804), and Bacillus cereus (ATCC 13061) at concentrations of 20 w/v%. The analysis of the nanocomposite microstructures exhibited a heterogeneous sponge-like morphology. The mechanical properties showed that the addition of 5 wt.% n-BG increased the elastic modulus of PLA by ca. 91.3% (from 1.49 ± 0.44 to 2.85 ± 0.99 MPa) and influenced the resorption capacity, as shown by histological analyses in biomodels. The incorporation of n-BGs decreased the PLA crystallinity (from 7.1% to 4.98%) and increased the glass transition temperature (T_g) from 53 °C to 63 °C. In addition, the n-BGs increased the thermal stability due to the nanoparticle’s intercalation between the polymeric chains and the reduction in their movement. The histological implantation of the nanocomposites and the cell viability with HeLa cells higher than 80% demonstrated their biocompatibility character with a greater resorption capacity than PLA. These results show the potential of PLA/n-BGs nanocomposites for biomedical applications, especially for long healing processes such as bone tissue repair and avoiding microbial contamination.     

Thermomechanical properties of cured isophtalic polyester resin modified with poly(ε-caprolactone)

The effect of a low profile additive, poly(ε-caprolactone) (PCL), on the thermal and mechanical properties of unsaturated polyester resins (UP) was investigated by differential scanning calorimetry (DSC), dynamic mechanical thermal analysis (DMTA), and tensile tests. The morphology of the systems has been studied by scanning electronic microscopy (SEM). Two PCL molecular mass were selected (PCL2: M _n = 2000 g mol⁻¹ and PCL50: M _n = 50000 g mol⁻¹) to analyze the influence of the molecular mass and the content of PCL on the UP resins and to establish the relation between thermomechanical behavior and morphology. DSC and DMTA glass transition temperatures (T _g) of the UP cured samples containing PCL indicate that PCL2 is miscible with UP whereas for UP + PCL50 system, T _g values are very close to the ones corresponding to neat UP. Besides in UP + PCL2 systems, one phase morphology is observed in which PCL2 would act as solvent of the reacting mixture along curing process; however, UP + PCL50 systems present phase-separated morphology. The presence of PCL2 and PCL50 in UP resin leads to a decrease of the tensile strength and the Young′s modulus as much notorious as the PCL concentration increases. For UP + PCL2 system the elongation at fracture increases in relation to neat UP, increasing as well with the PCL content.     

Dynamic mechanical analysis of multiblock (segmental) polyesterimides

Thermal, deformation-strength, and dynamic mechanical properties of films of segmental polyesterimides prepared from pyromellitic anhydride, aromatic diamines, and poly(butylene adipate) (M _n = 1000) with hydroxy terminal groups were studied. The glass transition points T _g of the samples obtained are below 0°C. The dynamic elastic modulus curves at temperatures higher than T _g are characterized by a portion in which the modulus only weakly depends on temperature.     

Segmented polyurethanes with 4,4′-bis-(6-hydroxyhexoxy) biphenyl as chain extender. I. Synthesis and characterization of 2,4-tdi-polyurethanes

Polyurethanes composed of 2,4-toluene diisocyanate (TDI), poly (butylene adipate) diols (PBA) of different molecular weights, and 4,4′-bis-(6-hydroxyhexoxy) biphenyl (BHHBP) were prepared by a two-step solution polymerization process. The polyurethanes were char-acterized by elemental analysis, NMR, and SEC. The thermal properties were investigated by DSC, DMA, and optical polarizing microscopy. Dependent on the molecular weight of the PBA, a shift in the glass transition temperature T_g of the polyurethanes has been observed by DSC and DMA. Polyurethanes based on poly (butylene adipate)s of M_n ～ 2000 exhibited a T_g nearly independent on the hard-segment content up to 50% LC hard segments, indicating the existence of mainly phase separated soft and hard segments. By shortening the PBA chain length up to 1,000 and further to 600, the T_g of the polyester soft-segment phase increases with growing hard-segment content, a consequence of enhanced interaction between the hard and soft segments. This tendency is observed to the greatest extent at polyurethanes with the shortest, polyester diol and can be interpreted as a partial miscibility or compatibility of hard and soft segments. Although in polyurethanes with PBA 2000 the mesophase can be proven at a hard-segment content of ～ 40%, its appearance in polyure-thances prepared with PBA 1000 or PBA 600 requires a hard-segment content > 60%. © 1995 John Wiley & Sons, Inc.     

High thermal stable polyimide resins derived from phenylethynyl-endcapped fluorenyl oligoimides with low melt viscosities

To improve the processability and thermal stability of polyimide, a series of novel phenylethynyl-endcapped oligoimides(PEPA-oligoimides) with calculated molecular weights(M_nC) were successfully prepared from thermal imidization of 4,4'-(9-fluorenylidene) dianiline(BAFL) as fluorenyl diamine, 4,4′-oxy-diphthalic anhydride(ODPA) as aromatic dianhydride and 4-phenylethynylphthalic anhydride(4-PEPA) acted as reactive end-capping reagent at elevated temperatures. Experiment results indicated that the oligoimides were the mixtures of PEPA-endcapped oligomers with different degrees of polymerization characterized by MALDI-TOF mass spectra. The influence of chemical structures on the melt processabilities of the oligoimides, the thermal, dielectric and mechanical properties of the thermoset resins was studied. The typical oligoimide resin owned minimum melt viscosity of 0.2 Pa·s at around 310 °C and wide melting processing window, suitable for resin transfer molding(RTM). Besides, its corresponding thermal-cured polyimide resin possessed glass transition temperature(T_g) as high as 514 °C. The dielectric constants of polyimide resins decreased from 3.15 to 2.80 by reducing the M_nC. The mechanical properties of the polyimide neat resins were improved gradually with increasing MnC. Finally, the carbon fiber/polyimide(C_f/PI) composite laminates showed excellent mechanical strength retention rate at 350 °C, might be long-term served at extremely high temperature in aerospace and aviation field.     

Note on the glass transition temperature of Poly(vinylphenol)

Critical overview of literature data on the glass transition temperature T_g of poly(4-vinylphenol) PVPh revealed a large scatter of values ranging between 53 and 194 °C, which can only partially be attributed to molecular-mass effect. The reason could be seen in residual moisture and/or solvent in samples subjected to insufficient or even no drying. Based on selected two thirds of literature data, a regression equation is proposed for the dependence of T_g on 1/M_n. Two samples of commercial PVPh (M_n 11,500; M_w 22,100) and (M_n 19,700; M_w 40,900) were studied by DSC, ATR-FTIR, and SEC methods. A procedure of preparing well defined samples is proposed: PVPh vacuum-dried at 140 °C for 24 h is dissolved in tetrahydrofuran and precipitated in hexane. The precipitate is vacuum-dried at 40 °C for 24 h, weighed into a pierced DSC pan. After final vacuum drying at 140 °C for 24 h, the sample is analyzed. The PVPh samples treated in this way showed T_g of 175.0 °C and 179.6 °C, respectively.     

Synthesis and characterizations of novel phosphorous-nitrogen containing poly(ether sulfone)s

The synthesis of novel phosphorus-nitrogen synergism aromatic poly(ether sulfone)s was carried out successfully by using phosphorus-containing and nitrogen-containing biphenol-like monomers, 1,1′-bis(4-hydroxyphenyl)-metheylene-bispheny-1-oxophosphine oxide (DOPO-PhOH) and 1,2-dihydro-4-(4-hydroxyphenyl)phthalazin-1(2H)-one (DHPZ), in the usual synthesis procedure. Polymers with sufficient molecular weights could be obtained. The structure of the phosphorus-nitrogen containing poly(ether sulfone)s was characterized by means of Fourier transform infrared spectra (FTIR) and nuclear magnetic resonance spectroscopy (¹H NMR, ³¹P NMR). The influence of monomer ratio on their thermal stability was also investigated by adjusting the proportion of DOPO-PhOH/DHPZ (mol/mol) from 80/20 to 20/80. The molecular weight and glass-transition temperatures (T_g′s) of the polymers increased with increasing content of the DHPZ monomer. The high thermal stabilities were depended on the different proportion of diol type incorporated.     

New development on plasticized poly(lactide): Chemical grafting of citrate on PLA by reactive extrusion

New plasticization ways based on low molecular plasticizers from citrates family were investigated to improve the ductility of poly(lactide) (PLA). Grafting reactions between anhydride-grafted PLA (MAG-PLA) copolymer with hydroxyl-functionalized citrate plasticizer, i.e. tributyl citrate (TbC), were so-carried out through reactive extrusion. TributylO-acetylcitrate (ATbC) was used as a non-functionalized reference. Both plasticizers drastically decreased the T_g of PLA. However, the grafting reaction of TbC into MAG-PLA revealed a shift of PLA T_g toward higher values. After 6 months of aging, no phase separation was observed. However, plasticizer leaching was noticed in the case of PLA/ATbC materials, leading to the shift of T_g toward lower temperatures. In contrast, no major leaching phenomenon was noticed in PLA/TbC and PLA/MAG-PLA/TbC blends, indicating that the mobility restriction derived from the hydrogen bonding that can occur between PLA and TbC as well as the grafting reaction of TbC into MAG-PLA enabled to reduce leaching phenomena.