Anchoring of hydrophobically modified poly(sodium acrylate)s into DDP vesicle bilayers: hydrophobic match and mismatch

 Differential scanning microcalorimetric thermograms have been recorded for aqueous solutions containing vesicles formed by sodium di-n-dodecyl phosphate, in the presence of different concentrations of poly(sodium acrylate-co-n-alkyl methacrylate), where n-alkyl= C₉H₁₉, C₁₂H₂₅, C₁₈H₃₇. The mole fraction of hydrophobic moieties in the copolymer is 0.04. The main phase transition temperature (T _m) is hardly affected by the presence of poly(sodium acrylate)s bearing n-dodecyl chains, whereas the anchoring of polymers bearing n-nonyl or n-octadecyl groups reduces the main phase transition temperature significantly from ca. 34 °C to ca. 32 °C. In parallel, the enthalpy of transition per mole of DDP monomer (Δ_m H _int) is lowered upon adding polymer. Again, the polymer containing n-dodecyl moieties hardly affects Δ_m H _int. These patterns are explained by the notion that the extent of the disruptive effect of alkyl chains incorporated into the bilayer depends on the extent of the mismatch between the chain lengths of the intruding alkyl chains and the hydrophobic moieties composing the vesicle bilayer. Added hydrophobically modified polymers increase the cooperativity of the melting process, as shown by the increase of n _DDP. We suggest that the anchoring poly(sodium acrylate-co-n-alkyl methacrylate) relieves the strain in the curved outer monolayer of a pure DDP bilayer by allowing the presence of larger “patches” characterized by low curvature. Received: 12 May 1997 Accepted: 20 October 1997     

Interactions of hydrophobically modified poly(sodium acrylate) with globular proteins

The association of a series of hydrophobically modified poly(sodium acrylate) (HMPA) with lysozyme, a cationic globular protein, or with bovine serum albumin (BSA), an anionic globular protein, was investigated at pH=9 by rheology and to a lesser extent by steady-state fluorescence spectroscopy. Under suitable concentration conditions, this association leads to a drastic viscosity enhancement which is improved when the polymer hydrophobicity is increased. A mechanism is proposed: the hydrophobic regions of the globular proteins interact strongly with the alkyl groups of one or more polymer chains. In the later case, the macromolecules are crosslinked via the proteins, which leads to viscosity enhancement and even gelation. Analogies and differences between these systems and surfactant/HMPA systems previously studied in our laboratory are emphasized and discussed.     

Swelling of hydrophobically modified poly(acrylamide) and poly(acrylamide)-co-(acrylic acid) gels in surfactant solutions

A series of hydrophobically modified polyacrylamide and polyacrylamide-co-poly(acrylic acid) gels with systematically varying hydrophobicity were prepared by free-radical polymerization of acrylamide, n-alkylacrylamides (n = 10, 12, and 14), and acrylic acid. The swelling of these gels was examined in water and in both anionic and cationic surfactant solutions. It was found that the gels which incorporated acrylic acid showed extremely high swelling in water. Maximum swelling was observed in gels which incorporated 10 mol% acrylic acid. The swelling of these gels was much less in solutions of both anionic and cationic surfactants than in water. The gels which did not incorporate acrylic acid demonstrated little swelling in water, but showed increased swelling in both anionic and cationic surfactant solutions with increased hydrophobicity of the gel. Received: 1 February 1999 Accepted in revised form: 5 March 1999     

Interaction between water and polymer chains in poly(hydroxyethyl acrylate) hydrogels

Polymer networks of different cross-linking densities were prepared by copolymerisation of hydroxyethyl acrylate and ethylene glycol dimethacrylate. The average molecular weight between cross-links as well as the polymer chain mobility were characterised by means of dynamic–mechanical spectroscopy. Equilibrium sorption isotherms and the water uptake in immersion in liquid water allowed the determination of the Flory–Huggins interaction parameter between water molecules and polymer chain segments, which decreased with the water activity in the hydrogel and increased with the cross-linking density as a consequence of the hydrophobic character of the cross-linking agent. Dynamic sorption and desorption experiments were used to determine the diffusion coefficient. Received: 11 November 1999 Accepted: 28 July 2000     

Characteristic ratio of poly(tetrahydrofurfuryl acrylate) and poly(2-ethylbutyl acrylate)

The synthesis, characteristic ratio C_∞ and glass transition temperature (T_g) of poly(tetrahydrofurfuryl acrylate) (PTHFA) and of poly(2-ethylbutyl acrylate) (P2EBA) are reported. P2EBA has slightly lower flexibility (C_∞ = 9.2) than PTHFA (C_∞ = 8.6), mainly because of the higher bulkiness of its side group and the closer proximity to the main chain. The C_∞ results compared with the corresponding polymethacrylates show an increase in flexibility due to the absence of the α-methyl group. Comparison with poly(methyl acrylate) clearly shows the influence of the bulkiness of the side group on the chain flexibility. The lower T_g of P2EBA than that of PTHFA may be explained by the higher flexibility of the 2-ethylbutyl side group. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35 : 1589–1592, 1997     

Preparation of poly(N-isopropylacrylamide)-grafted polymer monolith for hydrophobic interaction chromatography of proteins

Poly(N-isopropylacrylamide)-grafted polymer monolith has been achieved using a surface-initiated atom transfer radical polymerization grafting polymerization within the pores of poly(chloromethylstyrene-divinylbenzene) macroporous monolith contained in a 100 mm × 4.6 mm I.D. stainless steel column. The grafted-poly(N-isopropylacrylamide) on the surface of the grafted monolith that was used as chromatographic stationary phase showed a response to the variation of temperatures and/or salt concentrations. This study focus on its salt concentration responsive property and it has been revealed that the hydrophobicity of the grafted monolith can be adjusted by changing salt concentrations in the range of 0.05-2.0 mol/L. A variety of salts including sodium sulfate, ammonium sulfate and sodium chloride exhibited different effects on the alteration of hydrophobicity of the grafted monolith, and the effect of the salts was in the order of sodium sulfate > ammonium sulfate > sodium chloride. Based on this response to salt concentrations, the grafted monolith was applied in hydrophobic interaction chromatography of proteins, and the base-line separation of a six proteins mixture consisting of cytochrome c, myoglobin, ribonuclease A, bovine serum albumin, ovalbumin and thyroglobulin bovine was achieved by a salt gradient elution.     

Sorption properties of hydrophobically modified poly(acrylic acids) as natural organic matter model substances to pyrene

Amphiphilic natural organic matter (NOM) in soil, water and sediments plays an important role in the fate of low-soluble hydrophobic organic compounds (HOC) in the environment. Scaling NOM structural factors, which affect the transport and immobilization of HOC, is rather involved due to the complexity of the NOM materials. Sorption properties of hydrophobically modified polyacrylic (HMPA) polymers as NOM model substances for pyrene were investigated and discussed with regard to reported NOM results. Emission fluorescence spectroscopic properties of pyrene and potentiometric titrations were used to characterize the hydrophobic and acidic properties of HMPA samples. Excitation fluorescence spectroscopy allowed a speciation of pyrene molecules. Overall complexation constants β₁ and β₂ of pyrene with hydrophobic moieties (–C₈H₁₇) and (–C₁₆H₃₃) were calculated depending on the pH and electrolyte cation nature at an ionic strength of 10 mM, typical of soil solution conditions. Aggregation of HMPA molecules was detected by photon correlation spectroscopy. Normalized sorption constant K_oc values for pyrene with HMPA samples similar to reported values with NOM support recent observations on the contribution of aliphatic moieties to the binding of polyaromatic hydrocarbons (PAH). The HMPA samples also model the partitioning behavior of hydrophobic micelle-like structures of NOM.     

Reentrant phase transition and network parameters of hydrophobically modified poly[2-(diethylamino)ethylmethacrylate-co-N-vinyl-2-pyrrolidone/octadecyl acrylate] hydrogels

Hydrophobically modified poly[2-(diethylamino)ethylmethacrylate-co-N-vinyl-2-pyrrolidone/octadecyl acrylate] [P(DEAEMA-NVP/OA)] hydrogels with different OA content were prepared by free-radical crosslinking copolymerization of corresponding monomers in tert-butanol. The swelling equilibrium of the hydrogels was investigated as a function of temperature and hydrophobic comonomer content in pure water. An interesting feature of the swelling behavior of the P(DEAEMA-NVP/OA) hydrogels was the reentrant phase transition where the hydrogels collapse once and reswell as temperature increased. The average molecular mass between crosslinks and polymer-solvent interaction parameter (χ) of the hydrogels were calculated from equilibrium swelling values. The enthalpy (ΔH) and entropy (ΔS) changes appearing in the χ parameter for the hydrogels were determined by using the Flory-Rehner theory. It was observed that the experimental swelling data of the hydrophobic hydrogels at different temperature agreed with the Flory-Rehner theory, that provided that the sensitive dependence of χ parameter on both temperature and polymer concentration is taken into account.     

Interpolymer complexes of poly(acrylic acid) with poly(2-hydroxyethyl acrylate) in aqueous solutions

Complexes formed from poly(acrylic acid) and poly(2-hydroxyethyl acrylate) were studied in aqueous solutions by viscometric, turbidimetric, FTIR spectroscopic, and thermogravimetric analysis methods. The formation of interpolymer complexes stabilized by hydrogen bonds was observed. It was found that the compositions of these interpolymer complexes are strongly dependent on the concentration of polymers, the order of mixing the solutions, and the pH. It was demonstrated that the complexation ability of poly(2-hydroxyethyl acrylate) is relatively low compared to other known nonionic water-soluble polymers. However, it can be significantly increased via hydrophobic modification of the poly(acrylic acid) using cetyl pyridinium bromide.     

Study on interaction between Tb(III) and poly(N-isopropylacrylamide)

A new kind of the thermo-sensitive and fluorescent complex of poly(N-isopropylacrylamide) (PNIPAM) and Tb(III) was synthesized by free radical polymerization, in which PNIPAM was used as a polymer ligand. The complex was characterized by using X-ray photoelectron spectroscopy (XPS), ultraviolet-visual (UV), Fourier transform infrared (FT-IR) and fluorescence spectroscopy. The results from the experiments indicated that there is a strong interaction between PNIPAM and Tb(III), leading to a decrease in the electron density of nitrogen and oxygen atoms and an increase in the electron density of Tb(III) in the PNIPAM containing Tb(III) by contrast with PNIPAM and Tb(III), respectively, meanwhile, exhibiting that the Tb(III) is mainly bonded to oxygen atoms in the polymer chain of PNIPAM and formed the complex of PNIPAM-Tb(III). After forming the PNIPAM-Tb(III) complex, the emission fluorescence intensity of Tb(III) in the PNIPAM-Tb(III) complex is significantly enhanced because the effective intramolecular energy transfer from PNIPAM to Tb(III). Especially, the emission intensity of the fluorescence peak at 547 nm can be increased as high as 145 times comparing with that of the pure Tb(III). The intramolecular energy transfer efficiency for fluorescence peak at 547 nm can reach as high as 68%. The fluorescence intensity is related the weight ratio of Tb(III) and PNIPAM in the PNIPAM-Tb(III) complex. When the weight ratio is 1.4%, the maximum fluorescence enhancement can be obtained. Nevertheless, the lower critical solution temperature of PNIPAM containing a low content of Tb(III) has not obviously changed after the formation of the complex of PNIPAM-Tb(III) by the interaction between PNIPAM and Tb(III). This novel thermosensitive and fluorescence characterization of the PNIPAM-Tb(III) complex may be useful in the fluorescence systems and the biomedical field.     

The morphology of poly(vinylidene fluoride) crystallized from blends of poly(vinylidene fluoride) and poly(ethyl acrylate)

A combined optical and electron microscopical study has been carried out of the crystallization habits of poly(vinylidene fluoride) (PVF₂) when it is crystallized from blends with noncrystallizable poly(ethyl acrylate) (PEA). The PVF₂/PEA weight ratios were 0.5/99.5,5/95, and 15/85. Isothermal crystallization upon cooling the blends from the single-phase liquid region was carried out in the range 135–155°C, in which the polymer crystallizes in the α-orthorhombic unit cell form. The 0.5/99.5 blend yielded multilayered and planar lamellar crystals. The lamellae formed at low undercoolings were lozenge shaped and bounded laterally by {110} faces. This habit is prototypical of the dendritic lateral habits exhibited by the crystals grown from the same blend at high undercoolings as well as by the constituent lamellae in the incipient spherulitic aggregates and banded spherulites that formed from the 5/95 and the 15/85 blends, respectively. In contrast with the planar crystals grown from the 0.5/99.5 blend, the formation of the aggregates grown from the 5/95 blend is governed by a conformationally complex motif of dendritic lamellar growth and proliferation. The development of these aggregates is characterized by the twisting of the orientation of lamellae about their preferential b-axis direction of growth, coupled with a fan-like splaying or spreading of lamellae about that axis. The radial growth in the banded spherulites formed from the 15/85 blend is governed by a radially periodic repetition of a similar lamellar twisting/fan-like spreading growth motif whose recurrence corresponds to the extinction band spacing. This motif differs in its fan-like splaying component from banding due to just a helicoidal twisting of lamellae about the radial direction. © 1993 John Wiley & Sons, Inc.     

FTIR study on molecular structure of poly(N-isopropylacrylamide) in mixed solvent of methanol and water

The intrachain and interchain hydrogen bonding of poly(N-isopropylacrylamide) (PNIPA) and intermolecular hydrogen bonding between PNIPA chains and the solvent molecules in the mixed solvent of methanol and water have been quantitatively investigated by using Fourier transform infrared (FTIR) spectroscopy at 25 °C. In this spectroscopic system with curve fitting program, we found that in the C-H stretching region, both the N-isopropyl group and the backbone underwent conformational change upon the solvent composition. An analysis of the amide I band suggested that the amide groups of PNIPA were mainly involved in intermolecular hydrogen bonding with water molecules, and the polymer chains were flexible and disordered in the mixed solvent when the methanol volume fraction (χ_v) was lower than 15%. While χ_v was in the range of 15-65%, about 30% of these intermolecular hydrogen bonding between the polymer and water were replaced by intrachain and interchain hydrogen bonding, consequently, PNIPA shrinked as aggregates. If χ_v was above 65%, the interchain hydrogen bonding became predominant due to the solubility characteristics of amphiphilic methanol, and the PNIPA system was homogeneous solution again. We believe that the reentrant transition is related to the weaker interaction between PNIPA molecules and methanol-water complexes, (H₂O)_m(CH₃OH)_n (m/n = 5/1, 5/2, 5/3, 5/4, 5/5) as compared to that between PNIPA and free water or free methanol.     

DSC study of the miscibility of poly(methyl acrylate)-polystyrene sequential interpenetrating polymer networks

The phenomenon of forced compatibilization has been studied in poly(methyl acrylate)-polystyrene PMA-i-PS sequential interpenetrating polymer networks, IPNs, using differential scanning calorimetry. Both networks in the IPN were prepared using the same amount of ethylene glycol dimethacrylate, EGDMA, as crosslinking agent. The samples were subjected to thermal treatments which included annealing at different ageing temperatures T _a, for 300 min. From the DSC curves, recorded on heating the enthalpy loss during the isothermal annealing, Δh _a was calculated. The dependence of Dh _a with the annealing temperature was used to define the temperature interval in which the conformational mobility is significant. The comparison of the Δh _a(T _a) curves obtained in an IPN and the results obtained with the pure component homo-networks with the same crosslinking density reveal some details of the miscibility of the IPN. In the case of the IPN crosslinked with 10% EGDMA, two peaks are apparent in the Δh _a(T _a) curve, but the high-temperature peak is shifted towards lower temperatures compared to that of the polystyrene network while the low-temperature one is nearly at the same temperature than the one of the poly(methyl acrylate) homonetwork. This means that compatibilization is not complete and phase separation still exists even at this high crosslinking density. The different behaviour of the high and low temperature transitions can be explained by the dynamic heterogeneity of the sample, i.e. by the different length of cooperativity of the conformational rearrangements of PMA and PS domains at any temperature. This revised version was published online in July 2006 with corrections to the Cover Date.     

Mechanical and rheological properties of poly(ethylene-co-ethyl acrylate) as a function of carbon black content

Carbon black (CB) filled poly(ethylene-co-ethyl acrylate) (EEA-CB) is used as conductive phase in conductive polymer composites (CPC). Electrical conductivity of CPC obtained from blends of immiscible polymers results from CB particles localization within the material, which depends on composition and processing conditions. It is particularly important to control viscosity of such systems as this parameter determines both the phase morphology and conductive pathway structure. The small scale, at which CB particle aggregation/dispersion phenomena occur within CPC, makes direct observations difficult. But the effect of carbon black particles/polymers interactions is clearly visible by means of rheological measurements. A strong reinforcing effect of CB on CPC in both solid and liquid states has been noticed. This phenomenon has been analyzed using classical models as a function of temperature and CB content. The results confirm the necessity of CPC rheology control especially during the process to achieve good reproducibility of electrical properties.     

The State of NaOH in NaOH/Poly(Sodium Acrylate) Composite

NaOH/poly(sodium acrylate) composites were prepared by in situ polymerization of acrylic acid with an overneutralization level by adding excess NaOH. The composites were studied by XRD, IR and ²³Na MAS NMR spectroscopy. The results showed that the high neutralization degree (>100%) may lead to a complete polymerization. Both XRD and ²³Na MAS NMR spectra did not show any peaks of phase-separated NaOH or Na₂CO₃ until the neutralization degree was up to 217.5%. It can be presumed that the aggregates of Na⁺ ions can contain approximately two Na⁺ units for every carboxyl group before the phase separation.     

Study on interaction between Tb(III) and poly(N-isopropylacrylamide)-g-poly(N-isopropylacrylamide-co-styrene) core-shell nanoparticles

Based on the synthesis of poly(N-isopropylacrylamide-co-styrene) P(NIPAM-co-St) and poly(N-isopropylacrylamide) (PNIPAM) grafted P(NIPAM-co-St) core-shell nanoparticle, a new kind of thermoresponsive and fluorescent complex of Tb(III) and PNIPAM-g-P(NIPAM-co-St) (PNNS) was successfully prepared. The PNNS-Tb(III) complex was characterized with the different techniques. It was found that when PNNS with the core-shell structure interact with Tb(III), Tb(III) mainly bonded to O of the carbonyl groups of PNNS, forming the novel PNNS-Tb(III) complex. After forming the complex, the emission fluorescence intensity of Tb(III) in the complex is significantly enhanced. Especially, the maximum emission intensity of the PNNS-Tb(III) complex at 545 nm is enhanced about 223 times comparing to that of the pure Tb(III) because the effective intramolecular energy transfer from PNNS to Tb(III). The intramolecular energy transfer efficiency from PNNS to Tb(III) reaches 50%. The fluorescence intensity is related the weight ratio of Tb(III) and PNNS in the PNNS-Tb(III) complex. When the weight ratio of Tb(III) and the PNNS is 12 wt%, the enhancement of the emission fluorescence intensity at 545 nm is highest. This novel fluorescence characterization of the PNNS-Tb(III) complex may be useful in the fluorescence systems and the biomedical field.     

Preparation and characterization of sodium carboxymethylcellulose/poly(N-isopropylacrylamide)/clay semi-IPN nanocomposite hydrogels

A new kind of pH-/temperature-responsive semi-interpenetrating polymer network hydrogels based on linear sodium carboxymethylcellulose (CMC) and poly(N-isopropylacrylamide) (PNIPA) cross-linked by inorganic clay (CMC/PNIPA/Clay hydrogel) was prepared. The temperature- and pH-responsive behaviors, the mechanical properties of these hydrogels were investigated. The CMC/PNIPA/Clay hydrogels exhibited a volume phase transition temperature around 32 °C with no significant deviation from the conventional PNIPA hydrogels. The swelling ratio of the CMC/PNIPA/Clay hydrogels gradually decreased with increasing the contents of clay. The influence of pH value on swelling behaviors showed that there is a maximum swelling ratio at pH 5.9. Moreover, the CMC/PNIPA/Clay hydrogels exhibited excellent mechanical properties with high tensile stress and elongation at break in excess of 1200%.     

ATRP synthesis and association properties of temperature responsive dextran copolymers grafted with poly(N-isopropylacrylamide)

Temperature responsive copolymers of dextran grafted with poly(N-isopropylacrylamide) (Dex-g-PNIPAAM) were prepared by atom transfer radical polymerization (ATRP) in homogeneous mild conditions without using protecting group chemistry. Dextran macroinitiator was synthesized by reaction of dextran with 2-chloropropionyl chloride at room temperature in DMF containing 2% LiCl. ATRP was carried out in DMF:water 50:50 (v/v) mixtures at room temperature with CuBr/Tris(2-dimethylaminoethyl)amine (Me₆TREN) as catalyst. Several grafted copolymers with well defined number and length of low polydispersity grafted chains were prepared. Temperature induced association properties in aqueous solution were studied as a function of temperature and polymer concentration by dynamic light scattering, fluorescence spectroscopy and atomic force microscopy (AFM). LCST, ranging from 35 to 41 °C, was significantly affected by number and length of grafted chains. The fine tuning of LCST around body temperature is an important characteristic not obtainable by conventional radical grafting of PNIPAAM. Well defined spherical nanoparticles were formed above the LCST of PNIPAAM. Hydrodynamic diameter was in the range 73-98 nm.     

Random copolymers of N-isopropylacrylamide and methacrylic acid monomers with hydrophobic spacers: pH-tunable temperature sensitive materials

Two series of random copolymers of N-isopropylacrylamide (NIPAAm) and comonomers derived from methacrylic acid with a different number of methylene units as hydrophobic spacers (n=4, 7 and 10) were synthesized via free radicals. The first series was prepared having the acid groups methoxy-protected while the second series have the acid groups free. The NIPAAm-copolymers of both series were prepared varying the comonomer content from 5 to 20 mol%. All the copolymers were characterized by FTIR, DSC, ¹H NMR and SLS. The aqueous solution behaviour of the copolymers having methoxy-protected acid groups shows that the comonomer increases the hydrophobicity of the copolymer chain and decreases its lower critical solution temperature (LCST). For the copolymers having free acid groups, hydrogen-bonding is responsible for a further decrease in the LCST of these copolymers in pure water. In buffer solutions, every acid comonomer have a critical ionization degree (α_crit) above which the LCST increases with increasing comonomer content while at an ionization degree lower than α_crit the LCST decreases with increasing comonomer content. In dependence of comonomer content, number of methylene units in the spacer and the pH of the buffer solution, the LCST of the copolymers can be varied widely, showing that these random copolymers have pH-tunable temperature sensitivity.     

Interactions in solution between a hydrophobic polymer and various kinds of surfactants

Interactions in solution between a hydrophobic polymer and surfactants were studied by viscometry, light scattering and conductimetry measurements. One polymer, poly(2-ethyl hexyl methacrylate) (P2EHMA), five surfactants, sodium dodecyl sulfate (SDS), hexadecyl trimethylammonium bromide (HTAB), hexadecyl pyridinium chloride (HPCl), and ethoxylated nonyl phenol containing 10 or 25 segments of ethylene oxide (NP10 or NP25), and one solvent mixture, THF/6 vol% H₂O were used in this work. For the P2EHMA/surfactant mixtures in THF/6 vol% H₂O, the viscosity versus surfactant concentration curves are similar in shape for all surfactants. They show a minimum at low surfactant concentration followed at higher concentration by a maximum and a plateau. An interpretation of these curve shapes is proposed. The relevance of these findings to the problem of the polymer/surfactant interactions in latexes and latex films is also discussed.