Synthesis and characteristic of double hydrophilic block copolymer with amine pendant chains

Novel double hydrophilic block copolymers with amine pendant chains were synthesized by polymerization of 4-vinyl benzylamine hydrochloric salt using 4,4′-azo-bis[4-cyanopentanoate poly（ethylene glycol） ester] as macroazoinitiator. The structures of the copolymers were characterized by ^1H NMR, FTIR spectra and acid-base titration, GPC-MALS techniques.     

Synthesis and characterization of polystyrene-b-polyisoprene-b-poly(methylmethacrylate) triblock copolymer

Polystyrene-b-polyisoprene-b-poly(methylmethacrylate) (PS-b-PI-b-PMMA) triblock copolymer was synthesized by sequential anionic polymerization. The as-synthesized triblock copolymer contains side products of inadvertently terminated PS and PS-b-PI precursors. The side products can be effectively removed by semi-prep scale liquid chromatography using multiple injection method to obtain pure PS-b-PI-b-PMMA. It was found that the removed side product contains another polymer species, coupled PS-b-PI, which could not be recognized by size exclusion chromatography (SEC) analysis since the elution peak of the coupled product overlaps with that of PS-b-PI-b-PMMA. This study demonstrates that the size based separation of SEC is often not good enough to characterize complex polymers precisely and interaction chromatography can render unique advantage over SEC analysis.     

Preparation and characterization of cross-linked hyaluronan nanoparticles

The present investigation describes the synthesis and characterization of novel biodegradable nanoparticles based on hyaluronic acid (HA). The diamine, 2,2′(ethylenedioxy)bis(ethylamine) was used for cross-linking of the HA linear chains. The condensation reaction of amino groups and pendant carboxyl groups of HA was performed in aqueous media at room temperature using water-soluble carbodiimide. The prepared nanosystems, aqueous solutions, or dispersions of nanoparticles were stable, transparent, or mildly opalescent systems depending on the ratio of cross-linking, findings consistent with values of transmittance above 77%. The structure of products was determined by nuclear magnetic resonance spectroscopy, and the particle size was identified by laser light scattering (DLS) and transmission electron microscopy (TEM) measurements. Particle size measured by TEM varied less than 130 nm; in the swollen state, the average size of the particles measured by DLS was in the range of 30–140 nm depending on the ratio of cross-linking and the molecular weight of HA. Formation of cross-linked nanoparticles results in a viscosity drop compared to the viscosity of the corresponding solution of the HA, and this trend becomes decreasingly appreciable as the molecular weight of HA decreases.     

Phytochemical profiling,antioxidant, enzyme inhibition and cytotoxic potential of Bougainvillea glabra flowers

Abstract

In this study, phytochemical composition, antioxidant, enzyme inhibition and cytotoxic activities of methanol and dichloromethane (DCM) extracts of Bougainvillea glabra (B. glabra) flowers were investigated. Methanol extract was found to have higher total bioactive contents and UHPLC-MS analysis of methanol extract revealed the presence of well-known phenolic and flavonoid compounds. Antioxidant activities were performed by radical scavenging (DPPH and ABTS), reducing power (FRAP and CUPRAC), phosphomolybdenum (TAC) and metal chelating assays. From our result, we observed that methanol extract had many antioxidant compounds. The DCM extract exhibited higher cholinesterases and α-glucosidase enzyme inhibition, while methanol extract showed significant urease inhibition. Both extracts exhibited strong to moderate cytotoxicity against MCF-7, MDA-MB-231, CaSki, DU-145 and SW-480 cancer cells with IC₅₀ values ranging from 88.49 to 304.7 µg/mL. The findings showed the B. glabra to possess considerable antioxidant, enzyme inhibition and cytotoxic potentials and therefore has potential to discover novel bioactive molecules.     

Cobalt nanoparticles in block copolymer micelles: Preparation and properties

 The preparation and properties of Co nanoparticles in polystyrene(PS)-poly-4-vinyl-py-ridine(PVP) micelles were studied. Elementary Co was generated by two methods: (i) by reduction of micelles loaded with CoCl₂, and (ii) by thermal decomposition of Co₂(CO)₈ in micel-lar solutions of such block copolymers. Co particles formed by both processes are effectively stabilized by the block copolymer matrix and do not aggregate. For CoCl₂ as a Co-source, the formed particles have a size less than 1 nm. Thermal treatment of such dried polymers at 200 ^°C for 2 h leads to spherical particles of 3–5 nm in size. The polymeric hybrid materials prepared in this way display remarkably high values of magnetization at rather low Co contents in the polymer, i.e., we obtain a tenfold increase of the specific magnetization density. Co₂(CO)₈ as a Co source, results in a more complex behavior. Co₂(CO)₈ dissolves in the solvent as well as in the micelle core where it is converted to an cationic–anionic complex involving the 4-VP units. The shape and size of the Co nanoparticles formed by thermolysis can be controlled by the balance of 4-VP/Co and can be varied from spherical particles in the limit of lower Co loads being mainly attached to the micelle core to a star-like and cubic morphology in case of excess of Co₂(CO)₈. Both superparamagnetic and ferromagnetic materials can be prepared. For ferromagnetic samples coercive force varies from 250 to 475 Oe depending on Co content and polymer sample. Received : 27 September 1996 Accepted: 22 November 1996     

星形PLA-PEG嵌段共聚物胶束的制备与表征

以胆酸为引发剂,用辛酸亚锡催化丙交酯开环聚合合成星型CA-PLA。利用DCC为脱水剂,将不同分子量的端羧基化PEG与星型CA-PLA偶联,合成一系列以胆酸为核的星形两亲性嵌段共聚物,用透析法制备共聚物胶束,并用TEM和DLS研究胶束的性质。合成了分子量为6000和12000的两种CA-PLA,其分子量可以通过胆酸羟基与丙交酯的比例进行控制。将分子量2000和5000的PEG分别与两种CA-PLA偶联,合成了四种星型CA-PLA-PEG嵌段共聚物。共聚物胶束形貌为均匀的球形,粒径为20-40nm,且随共聚物中PLA链段分子量的增加而增大,随PEG链段分子量的增加而减小。临界胶束浓度(CMC)低于同等链段长度的线型PLA-PEG嵌段共聚物胶束。     

Preparation and characterization of nanoparticles formed by chitosan-caseinate interactions

Intermacromolecular complexation between chitosan and sodium caseinate in aqueous solutions was studied as a function of pH (3–6.5), using absorbance measurements (at 600 nm), dynamic light scattering (DLS), and transmission electron microscopy (TEM). The chitosan–caseinate complexes formed were stable and soluble in the pH range 4.8–6.0. In this pH range, the biopolymers had opposite charges. At higher concentrations of chitosan (0.15 wt%), the soluble complexes associated to form larger particles. DLS data showed that, between pH 4.8 and 6.0, the particles formed by the complexation of chitosan and caseinate had sizes between 250 and 350 nm and these nanoparticles were visualized using negative staining TEM. Above pH 6.0, the nanoparticles associated to form larger particles, causing phase separation. Addition of NaCl increased the particle size. The pH dependence of the zeta potential of the mixture solutions was appreciably different from that of the pure protein and pure chitosan solutions.     

Preparation of reactive polymeric nanoparticles (RPNPs)

A series of reactive polymeric nanoparticles (RPNPs) was prepared by free radical nonlinear copolymerization of mono (M ₁) and trivinyl acrylic (M ₂) monomers in miniemulsion. The crosslinking density was determined by the mole ratio of the trivinyl component. It was found that the unswelled latex nanoparticles showed a narrower dispersity than in the organic solution of macromolecules. In latex, the size increased with the ratio of M ₂ monomer due to its higher polarity in the aqueous medium. However, the swollen nanoparticles, dissolved or dispersed in organic solvent, showed a higher dispersity as a function of composition and the crosslinking density. The residual vinyl groups adjacent to the nanoparticles were subjected to further crosslinking reactions. The reactive vinyl groups were detected by nuclear magnetic resonance spectroscopy (NMR). The size of particles in swollen state was determined by dynamic laser light scattering (DLS) method and the dried form by scanning electron microscopy (SEM). It was found that size of RPNPs is in the range of 50 to 500 nm. These particles possess properties that may allow their application in areas as disparate as dental filling material and as a component in industrial powder-based coatings.     

Preparation and self-assembly of pH-sensitive amphiphilic comb-shaped copolymer containing long fluorinated side chains

Novel pH-sensitive amphiphilic comb-shaped copolymers containing long fluorinated side chains, which combined the characteristics of pH-sensitivity from pendent tertiary amine groups, unique hydrophobic and fluorophobic characteristic from the fluorinated moieties and hydrophilicity from the poly (ethylene glycol) segments, were designed and synthesized via radical polymerizaion of 2-(Dimethylamino) ethyl methacrylate (DMAEMA), poly (ethylene glycol) methyl ether methacrylate (PEGMA) and homemade fluorinated macromonomer (PHFBMA-GMA). The physicochemical properties of polymeric micelles prepared therefrom were investigated. The chemical structures of the copolymers were characterized by GPC, FTIR and ¹H-NMR. The critical micelle concentrations (CMC) of the copolymers in different pH (5.0 and 7.4) were determined by fluorescence spectroscopy. Larger CMCs could be obtained in lower pH since the pronation of DMAEMA moieties enhanced the hydrophilicity. With increasing the amount, as well as the molecular weight, of PHFBMA-GMA, CMC decreased significantly. As pH decreased, particle size, as well as zeta potential of the polymeric micelles increased significantly, indicating significant pH-sensitivity of the polymeric micelles. Furthermore, larger polymeric micelles were obtained with larger amount, as well as higher molecular weight, of PHFBMA-GMA. Transmission electron microscopy (TEM) showed that the morphological shapes of the copolymers performed spherical micelles. The cytotoxicity test showed that the comb-shaped copolymers performed extremely low cytotoxicity. The pH-sensitive polymeric micelles prepared from the amphiphilic comb-shaped copolymers containing long fluorinated side chains could be potential candidates for nanotanks for hydrophobic or fluorophobic molecules and drug carriers and the facile preparation might fit for large scale industrialization.     

Preparation and characterization of poly(acrylic acid)-based nanoparticles

The present investigation describes the synthesis and characterization of nanoparticles based on poly(acrylic acid) (PAA) intramolecularly cross-linked with diamine, 2,2′-(ethylenedioxy)bis(ethylamine), using water-soluble carbodiimide. The aqueous colloid dispersions of nanoparticles were clear or mildly opalescent depending on the ratio of cross-linking, pH of the solution, and the molecular weight of PAA, finding consistent with values of transmittance between 3% and 99%. The structure was determined by nuclear magnetic resonance spectroscopy, and the particle size was identified by dynamic light scattering (DLS) and transmission electron microscopy (TEM) measurements. It was found that particle size depends on the pH, and at a given pH, it was caused by the ratio of cross-linking and the molecular weight of PAA. Particle size measured by TEM varied in the range of 20 and 80 nm. In the swollen state, the average size of the particles measured by DLS was in the range of 35–160 nm.     

Preparation and characterization of star ABC triblock copolymer of ethylene oxide,styrene and methyl methacrylate

A universally significant method,which combines the anionic polymerization with photoinduced charge transfer polymerization,for preparation of soluble star ABC triblock copolymer of ethylene oxide,styrene and methyl methacrylate,was described.The poly(ethylene oxide) (PEO) block was formed by initiation of phenoxy an-ions using p-aminophenol protected by Schiff's base as the parent compound Then the charge transfer system composed of PEO chains with deprotected-amino end groups and benzophenone initiated the polymerization of styrene and methyl metnacrylate sequentially under UV irradiation.The formed star triblock copolymer of styrene,ethylene oxide and methyl methacrylate could be purified by thin-layer chromatography (TLC) and characterized by IR,1H NMR,GPC (gel permeation chromatogrphy) and PGC (pyrolysis gas chromatography).     

Preparation, characterization and adhesive properties of di- and tri-hydroxy benzoyl chitosan nanoparticles

Modified chitosans with 3,4-di-hydroxy benzoyl groups (CS-DHBA) and 3,4,5-tri-hydroxy benzoyl groups (CS-THBA) were synthesized and their nanoparticles were prepared via ionic crosslinking by tripolyphosphate (TPP). The chemical structure and degree of substitution (DS) of di-and tri-hydroxy benzoyl chitosans are determined by FTIR and 1H-NMR spectroscopy. The morphology of particles, size distribution and zeta potential of nanoparticles were studied using transmission electron microscopy (TEM) and dynamic light scattering (DLS), respectively. The mean diameters of particles of CS-DHBA and CS-THBA nanoparticles were 144 nm and 112 nm, respectively. It was found that the particles size decreased slightly with decreasing the degree of substitution and increasing degree of deacetylation (DD), due to increasing of ionic crosslinking of ammonium ions and polyanions of tripolyphosphate. The TEM photographs of CS-DHBA show that these particles are spherical in shape, but the particles of CS-THBA show some aggregation. In addition, the solubility and the mechanical properties of the prepared modified chitosans and their nanoparticles were evaluated for bio-adhesive and biomedical application. The results of solubility tests indicated that, the CS-DHBA and CS-THBA have higher solubility at pH > 7 comparing to CS. Also the CS-DHBA, CS-THBA and their nanoparticles showed a significant adhesive capacity and enhanced tensile strength and tensile modulus.     

Acrylic acid copolymer nanoparticles for drug delivery: structural characterization of nanoparticles by small-angle x-ray scattering

Nanoparticles are possible carriers for drug delivery. Copolymer nanoparticles of acrylic acid, acrylic amide, acrylic butylester, and methacrylic methylester (CAA) dispersed in water and in 0.15 M NaCl-solution were investigated by small-angle x-ray scattering (SAXS) experiments. The particles were characterized in terms of parameters relevant for the in vivo distribution: particle shape and diameter, size distribution, surface structure, and their organization within tight systems.The CAA-nanoparticles exist in at least three populations of spheres with two minor subpopulations having radii of about 32 and 66 nm and the main moiety around 45 nm. The degree of polydispersity isR _w/R _N=1.05. The subpopulations possess different hydrophobic areas on their surfaces, leading to different recognition by opsonins in vivo and different organ distribution and clearance velocity. The particles are compact without channels and holes, which is proved by low internal hydrationw=0.22 g H₂O/g polymer. Drugs and coating surfactants will interact mainly with the outer surface and not tunnel into the carriers. The surface of the nanoparticles is fractal with a dimensionD=2.3. Probe-molecules with dimensions less than 11.4 nm in diameter will find a larger contact area than expected from the sphere radius. Adsorption rate and position of the arrival of surfactants, and possibly opsonins, may be affected thereby. The negative charges on the CAA-nanoparticle surface are nearly completely screened in physiological NaCl-solutions by counter-ions. Therefore, surface charges hamper carrier-cell interaction at short distances only and do not prevent specific recognition and clearance by the reticuloendothelial system (RES).     

Acrylic acid copolymer nanoparticles for drug delivery. Part II: Characterization of nanoparticles surface-modified by adsorption of ethoxylated surfactants

Copolymer nanoparticles of acrylic acid, acrylic amide, acrylic butylester, and methacrylic methylester with increasing content of acrylic acid were produced and surface-modified by adsorption of nonionic (Poloxamer 407, Poloxamine 908, Antarox CO 990) and ionic (Gafac RE 960) surfactants. The coated particles were characterized with regard to parameters relevant for the in vivo organ distribution: coating layer thickness, charge-reducing effect of the coating layer and surface hydrophobicity. Gafac was found to form highly charged surface layers leading to recognition by the reticuloendothelial system (RES). The hydrophobicity of the coating layers decreased with increasing thickness. The thickest coating layers were found on the most hydrophobic particles possessing least content of acrylic acid (1.9%). These particles coated with the nonionics were regarded as sufficiently hydrophilic to potentially reduce the uptake by the RES in vivo. The properties of coating layers can therefore be optimized by variation of the monomer ratios in copolymers.     

Preparation and characterization of biodegradable nanoparticles based on amphiphilic poly(3-hydroxybutyrate)-poly(ethylene glycol)-poly(3-hydroxybutyrate) triblock copolymer

Amphiphilic triblock copolymers of poly(3-hydroxybutyrate)-poly(ethylene glycol)-poly(3-hydroxybutyrate) (PHB-PEG-PHB) were directly synthesized by the ring-opening copolymerization of β-butyrolactone monomer using PEG as macroinitiator. Their structure, thermal properties and crystallization were investigated by ¹H NMR, differential scanning calorimetry (DSC) and X-ray diffraction. It was found that both PHB and PEG blocks were miscible. With the increase in the PHB block length, the triblock copolymers became amorphous because amorphous PHB block remarkably depressed the crystallization of the PEG block. Biodegradable nanoparticles with core-shell structure were prepared in aqueous solution from the amphiphilic triblock copolymers, and characterized by ¹H NMR, SEM and fluorescence. The hydrophobic PHB segments formed the central solid-like core, and stabilized by the hydrophilic PEG block. The nanoparticle size was close related to the initial concentrations of the nanoparticle dispersions and the compositions of the triblock copolymers. Moreover, the PHB-PEG-PHB nanoparticles also showed good drug loading properties, which suggested that they were very suitable as delivery vehicles for hydrophobic drugs.     

两种聚天冬氨酸接枝共聚物的制备及其阻垢性能

以马来酸酐、尿素、二乙烯三胺、1-氨基-2-萘酚-4-磺酸等为原料,合成了聚天冬氨酸/二乙烯三胺(PASP/DETA)和聚天冬氨酸/1-氨基-2-萘酚-4-磺酸接枝共聚物(PASP/1,2,4);采用红外光谱仪分析了产物的化学结构,并测定了其对工业用水的阻垢性能.结果表明,PASP/DETA对Ca3(PO4)2具有很好的阻垢性能,PASP/1,2,4对CaCO3具有很好的阻垢性能;当二者按PASP/DETA浓度5mg/L、PASP/1,2,4浓度1.5mg/L复配使用时,对CaCO3的阻垢率可达95.4%,对Ca3(PO4)2的阻垢率可达95.2%.     

Potential enzyme inhibitor triazoles from aliphatic esters: Synthesis,enzyme inhibition and docking studies

Enzyme inhibitors are vital aspects for studying enzymes and are employed as drugs to treat certain disorders, thus implying pivotal role in drug discovery. In the current study, a series of triazole compounds 4(a-o) were synthesised to explore their inhibitory potential against α-glucosidase and urease enzymes. These derivatives with dichlorophenyl substituents were prepared by cyclization of thiosemicarbazides and their structures were confirmed through spectroanalytical techniques. The in vitro biological screening revealed that the compounds 4a, 4b, 4k, 4l, 4m, 4o having IC₅₀ values of 121.09 ± 1.25, 137.22 ± 0.22, 110.4 ± 2.4, 114.79 ± 1.1, 146.72 ± 1.29, 94.21 ± 0.15 [µM] respectively, exhibited good potential α-glucosidase inhibition, in comparison to Acarbose: IC₅₀ 51.23 µM, while the compounds 4a, 4b, 4c, 4k, 4l, having IC₅₀ values of 48.52 ± 0.39, 52.22 ± 1.37, 60.98 ± 0.34, 37.06 ± 0.51, 38.66 ± 1.7 [µM] respectively exhibited good potential for urease inhibition near to standard(Thiourea: IC₅₀ 24.14 [µM]). These in vitro findings were accompanied further by molecular docking simulations, which revealed significant binding interactions of the synthesized derivatives within the active sites of the enzymes.     

一种喹啉阳离子聚合物粘土水化抑制剂研究

以丙烯酰胺(AM),烯丙醇聚氧乙烯醚(APEG)和溴化烯丙基喹啉(QAB)为单体,制备了一种阳离子聚合物AM/APEG/QAB。考察了单体配比、pH、引发剂浓度以及温度等合成条件对防膨率的影响。对聚合物进行了FTIR、1H NMR及TG表征。研究了不同浓度下聚合物溶液的防膨率,并利用XRD研究了聚合物溶液对钠蒙脱土(Na-MMT)层间距的影响。结果表明:该聚合物在浓度为2 wt%时的防膨率能达到78%。与低浓度的KCl互配不仅能够有效降低Na-MMT层间距到15.80,同时能够将岩心在水中浸泡后压入硬度保留率从42.6%提高至75.0%。     

Synthesis, modification and characterization of core-shell fluoroacrylate copolymer latexes

Core-shell fluoroacrylate copolymer latex, typically used for the protection of ancient stone monument, was synthesized in this paper by semi-continuous seed emulsion polymerization with butyl acrylate (BA) served as the core, methyl methacrylate (MMA), BA and dodecafluoroheptyl methacrylate (DFHMA, C₁₁H₈O₂F₁₂) served as the shell. At the same time, the above core-shell fluoroacrylate latex was modified by hydrolysis of tetraethyl orthosilicate (TEOS, Si(OC₂H₅)₄) in the presence of silane coupling agent dodecyltrimethoxysilane (DTMS, C₁₂H₂₅Si(OCH₃)₃). The chemical component of the final latex was analyzed by FT-IR. Morphology structure and the particle size of core-shell latex were determined by TEM. The effect of DFHMA and TEOS content on the latex and film properties was characterized by SEM-EDX, AFM, TEM, DSC and UV-vis. The analysis results indicated that the copolymer latex particle presented uniform sphere core-shell structure with 40-50 nm in diameter. About 30 wt% DFHMA gave favorable characteristics both in latex and in film properties. Compared with core-shell fluoroacrylate latex, the modified fluoroacrylate copolymer displayed, when TEOS was controlled in 2.2-3.8 wt%, sound performances in hydrophobic, mechanics, thermodynamics and resistance to ultraviolet.     

Growth of ordered silver nanoparticles in silica film mesostructured with a triblock copolymer PEO-PPO-PEO

Elaboration of mesostructured silica films with a triblock copolymer polyethylene oxide-polypropylene oxide-polyethylene oxide, (PEO-PPO-PEO) and controlled growth of silver nanoparticles in the mesostructure are described. The films are characterized using UV-visible optical absorption spectroscopy, TEM, AFM, SEM, X-ray diffraction (XRD) and Rutherford backscattering spectrometry (RBS). Organized arrays of spherical silver nanoparticles with diameter between 5 and 8 nm have been obtained by NaBH₄ reduction. The size and the repartition of silver nanoparticles are controlled by the film mesostructure. The localization of silver nanoparticles exclusively in the upper-side part of the silica-block copolymer film is evidenced by RBS experiment. On the other hand, by using a thermal method, 40 nm long silver sticks can be obtained, by diffusion and coalescence of spherical particles in the silica-block copolymer layer. In this case, migration of silver particles toward the glass substrate-film interface is shown by the RBS experiment.