Synthesis and characterization of novel heat resistant poly(amide imide)s

A series of new poly(amide imide)s was prepared from new diacid containing sulfone, ether, amide and imide groups with various aromatic diamines. The diacid was synthesized via four steps, starting from reaction of 4-aminophenol with 4-nitrobenzoyl chloride in the presence of propylene oxide afforded N-(4-hydroxy phenyl)-4-nitrobenzamide. In the second step, reduction of nitro group resulted in preparation of 4-amino-N-(4-hydroxy phenyl) benzamide. In the next step for the preparation of diamine, the reaction of 4-amino-N-(4-hydroxy phenyl) benzamide with bis-(4-chlorophenyl) sulfone in the presence of K₂CO₃ was achieved. The prepared sulfone ether amide diamine was reacted with two moles of trimellitic anhydride to synthesize related sulfone ether amide imide diacid. The precursors and final monomer were characterized by FT-IR, H-NMR and elemental analysis. Direct polycondensation reaction of the sulfone ether amide imide diacid with different diamines in the presence of triphenyl phosphite afforded five different poly (sulfone ether amide imide amide)s. The obtained polymers were fully characterized and their physical properties including thermal behavior, thermal stability, solubility, and inherent viscosity were studied.     

Synthesis and characterization of new optically active poly(amide‐imide)s containing epiclon and L‐methionine moieties in the main chain

Epiclon [3a,4,5,7a‐tetrahydro‐7‐methyl‐5‐(tetrahydro‐2,5‐dioxo‐3‐furanyl)‐1,3‐isobenzofurandione] (1) was reacted with L ‐methionine (2) in acetic acid and the resulting imide‐acid 3 was obtained in high yield. The diacid chloride 4 was prepared from diacid derivative 3 by reaction with thionyl chloride. Thermostable poly(amide‐imide)s containing epiclon structure were synthesized by reacting of diacid chloride 4 with various aromatic diamines. Polymerization reaction was performed by two conventional methods: low temperature solution polycondensation and short period reflux conditions. In order to compare conventional solution polycondensation reaction methods with microwave‐assisted polycondensation, the reactions were also carried out under microwave conditions with a small amount of o‐cresol that acts as a primary microwave absorber. The reaction mixture was irradiated for 6 min with 100% radiation power. Several new optically active poly(amide‐imide)s with inherent viscosity ranging from 0.15 to 0.36 dl/g were obtained with high yield. All of the above polymers were fully characterized by ¹H‐NMR, FT‐IR, elemental analyses and specific rotation techniques. Some structural characterizations and physical properties of these new optically active poly(amide‐imide)s are reported. Copyright © 2005 John Wiley & Sons, Ltd.     

Poly(sulfone ether amide amide)s as a new generation of soluble, thermally stable polymers

A new sulfone ether amide diamine was synthesized via three steps, starting from reaction of 4-aminophenol with 4-nitrobenzoyl chloride in the presence of propylene oxide afforded N-(4-hydroxy phenyl)-4-nitrobenzamide (HPNB). In the next step, reduction of nitro group resulted in preparation of 4-amino-N-(4-hydroxy phenyl) benzamide (AHPB). Final step in the preparation of diamine was the reaction of AHPB with bis(4-chlorophenyl) sulfone in the presence of K₂CO₃. All the materials were characterized using conventional spectroscopic methods. Poly(sulfone ether amide amide)s were synthesized by polycondensation reactions of prepared diamine with different diacid chlorides (aromatic and aliphatic ones). The obtained polymers were fully characterized and their physical properties including thermal behavior, thermal stability, solubility, and inherent viscosity were studied.     

Molten salt ionic liquid-assisted synthesis of nano-structured poly(amide imide)s based on 4,4′-methylenebis(3-chloro-2,6-diethyl trimellit imidobenzene) via microwave process as an environmentally friendly methodology

In this paper, for the first time, 4,4′-methylene-bis(3-chloro-2,6-diethyl trimellit imidobenzene) was prepared by the condensation reaction of 4,4′-methylene-bis(3-chloro-2,6-diethylaniline) and trimellitic anhydride. A series of novel poly(amide imide)s was prepared by the direct polycondensation of the synthesized diimide diacid and various commercial diamines using tetra-n-butylammonium bromide and triphenyl phosphite as a condensing agent under microwave irradiation. Tetra-n-butylammonium bromide acts both as a solvent and a catalyst to mediate clean polymerization reactions to yield the desired polymers. The obtained polymers were characterized with FTIR, ¹H NMR, X-ray diffraction, field emission scanning electron microscopy, elemental and thermogravimetric analysis. The poly(amide imide)s were generally soluble in polar organic solvents, such as N,N′-dimethyl acetamide, N,N′-dimethylformamide, N-methyl-2-pyrrolidone and sulfuric acid at room temperature, and are insoluble in methylene chloride, cyclohexane and water. Morphology probes showed these macromolecules were non-crystalline and nano-structured polymers. The effect of ultrasonic irradiation on the surface morphology of polymers was studied and the results demonstrated that the morphology of macromolecules after ultrasonication became more homogenous than it is before ultrasonic radiation. On the basis of thermogravimetric analysis data, such polymers are thermally stable and can be classified as self-extinguishing polymers.     

Novel pyridine-based ether ester diamine and resulting thermally stable poly (ether ester amide)s

A novel pyridine-based ether ester diamine was prepared in three steps. Reaction of 1,5-dihydroxy naphthalene with 4-nitrobenzoyl chloride afforded 5-hydroxy-1-naphthyl-4-nitrobenzoate (HNNB). Reduction of nitro group resulted in preparation of an amino compound named 5-hydroxyl-1-naphthyl-4-aminobenzoate (HNAB). The diamine was synthesized by nucleophilic substitution reaction of 5-hydroxyl-1-naphthyl-4-aminobenzoate with 2,6-dichloropyridine in the presence of K₂CO₃. The obtained diamine was fully characterized and used to prepare novel thermally stable poly (ether ester amide)s via polycondensation reaction with different aromatic and aliphatic diacid chlorides. All the polymers were characterized and their physical and thermal properties were studied.     

Synthesis and Properties of New Polyphenylquinoxaline-imide-amides

Abstract

New thermostable polymers containing imide and phenylquinoxaline units have been prepared by solution polycondensation of diaminophenylquinoxaline coupled by ether, methylene, or sulfone linkages with diacid chlorides containing preformed imide rings. Solubility, thermal stability, and electroinsulating properties of these compounds are discussed and compared with those of related heterocyclic polymers previously reported.     

Synthesis and characterization of heat resistant, pyridine-based polyimides with preformed ether and ester groups

A pyridine-based diamine as a building block for the preparation of heat resistant polyimides was prepared. Reaction of 1,5-dihydroxy naphthalene with 4-nitrobenzoyl chloride resulted in preparation of 5-hydroxy-1-naphthyl-4-nitrobenzoate (HNNB). 5-Hydroxyl-1-naphthyl-4-aminobenzoate (HNAB) was prepared via reduction of nitro group of HNNB. The diamine with built-in ether and ester groups was synthesized by nucleophilic substitution reaction of HNAB with 2,6-dichloropyridine in the presence of K₂CO₃. The obtained diamine was fully characterized and its polycondensation reaction with different aromatic dianhydrides led to preparation of novel heat resistant poly (ether ester imide)s. All the polymers were characterized and their physical and thermal properties were studied.     

Synthesis and characterization of novel,optically active poly(amide‐imide)s from N,N′‐(4,4′‐sulfonediphthaloyl)‐bis‐L‐phenylalanine diacid chloride and aromatic diamines under microwave irradiation

3,3′,4,4′‐Diphenylsulfonetetracarboxylic dianhydride was reacted with L ‐phenylalanine in acetic acid, and the resulting imide acid ( 3 ) was obtained in high yield. The diacid chloride ( 4 ) was obtained from its diacid derivative ( 3 ) by reaction with thionyl chloride. The polycondensation reaction of 4 with several aromatic diamines such as 4,4′‐sulfonyldianiline, 4,4′‐diaminodiphenyl methane, 4,4′‐diaminodiphenylether, p‐phenylenediamine, m‐phenylenediamine, 2,4‐diaminotoluene, and 1,5‐diaminonaphthalene was developed with a domestic microwave oven in the presence of trimethylsilyl chloride and a small amount of a polar organic medium such as o‐cresol. The polymerization reactions were also performed with two other methods: low‐temperature solution polycondensation in the presence of trimethylsilyl chloride and reflux conditions. A series of optically active poly(amide‐imide)s with moderate inherent viscosities of 0.21–0.42 dL/g were obtained in high yield. All of the aforementioned polymers were fully characterized by IR, ¹H NMR elemental analyses, and specific rotation techniques. Some structural characterizations and physical properties of these optically active poly(amide‐imide) s are reported. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3974–3988, 2003     

Poly(1,3,4-oxadiazole-amide)s containing pendent imide groups

A series of new poly(1,3,4-oxadiazole-amide)s containing pendent imide groups has been synthesized by solution polycondensation of aromatic diamines containing preformed 1,3,4-oxadiazole rings with two diacid chlorides containing imide rings. These polymers were also prepared by the reaction of the same diacid chlorides with p-aminobenzhydrazide which were subsequently cyclodehydrated in solid state. The polymers were soluble in polar amidic solvents and some of them gave transparent flexible films by casting from solutions. They showed high thermal stability with decomposition temperatures above 400°C and glass transition temperatures in the range of 245–327°C. They had low dielectric constants, in the range of 3.32–3.94, and good tensile properties.     

Preparation and characterization of optically active and organosoluble poly(amide‐imide)s from polycondensation reaction of N,N′‐(4,4′‐sulphonediphthaloyl)‐bis‐L‐isoleucine diacid with aromatic diamines

3,3′,4,4′‐Diphenylsulfonetetracarboxylic dianhydride (1) was reacted with L ‐isoleucine (2) in acetic acid and the resulting imide‐acid (3) was obtained in high yield. The diacid chloride (4) was prepared from the diacid derivative (3) by reaction with thionyl chloride. The polycondensation reaction of diacid chloride (4) with several aromatic diamines such as 4,4′‐sulfonyldianiline (5a), 4,4′‐diaminodiphenyl methane (5b), 4,4′‐diaminodiphenylether (5c), p‐phenylenediamine (5d),m‐phenylenediamine (5e), 2,4‐diaminotoluene (5f) and 4,4′‐diaminobiphenyl (5g) was performed by two conventional methods: low temperature solution polycondensation and short period reflux conditions. In order to compare conventional solution polycondensation reaction methods with microwave‐assisted polycondensation, the reactions were also carried out under microwave conditions with a small amount of o‐cresol that acts as a primary microwave absorber. The reaction mixture was irradiated for 6 min with 100% of radiation power. Several new optically active poly(amide‐imide)s with inherent viscosity ranging from 0.23 to 0.41 dl/g were obtained with high yield. All of the earlier polymers were fully characterized by IR, elemental analyses and specific rotation techniques. Some structural characterizations and physical properties of these new optically active poly(amide‐imide)s are reported. Copyright © 2005 John Wiley & Sons, Ltd.     

Thermostable Polymers Containing Phenylquinoxaline and Other Heterocyclic Units

Thermostable heterocyclic polymers containing phenyl-substituted quinoxaline and both amide and imide units have been synthesized by low-temperature solution polycondensation of diaminophenyl-quinoxalines with diacid chlorides of certain aromatic acids containing preformed imide rings. Also, copolymers have been obtained in which a mixture of diaminophenylquinoxaline and diaminooxadi-azole or diaminobenzimidazole was used in the reaction with the same diacid chlorides. The thermal stability and the electrical insulating properties of these products are discussed and compared with related heterocyclic polymers.     

Heat-resistant pyridine-based poly(ether-ester)s: Synthesis, characterization and properties

A pyridine-based diacid was synthesized via nucleophilic substitution reaction of 4-hydroxy benzoic acid with 2,6-dichloropyridine in the presence of potassium carbonate. The diacid was characterized using FT-IR and 1H-NMR spectroscopic methods and also with elemental analysis. Polycondensation reaction of the diacid with different diols including 1,4-dihydroxy benzene, 1,5-dihydroxy naphthalene, bis-phenol A and bis-phenol-P resulted in preparation of pyridine-based poly(ether-ester)s. The polymers were characterized and their physical and thermal properties including inherent viscosity, molecular weight, solubility, thermal stability, thermal behavior and crystallinity were studied. They revealed high heat-resistance and improved solubility in polar solvents. Structure-property relations for the prepared polyester were also studied.     

Synthesis and characterization of novel optically active poly(ester‐imide)s with high Tg and good thermal stability

A series of novel optically active poly(ester‐imide)s (ter‐PEIs) with high glass transition temperature (T_g), good thermal stability, and solubility were successfully designed and synthesized by direct polycondensation reactions, using p‐hydroxybenzoic acid (PHB), 4,4’‐dihydroxybenzophenone, and a chiral diacid, N,N'‐(pyromellitoyl)‐bis‐L‐phenylalanine diacid as monomers. The resulting terpolymers were characterized by¹H‐NMR, FTIR, element analysis, thermogravimetric analysis, different scanning calorimeter and wide‐angle x‐ray diffraction, etc. The ter‐PEIs are amorphous polymers with good heat resistance and high T_gs. They are soluble in many common polar organic solvents and show optically rotation property. The specific rotation values of the ter‐PEIs increase with the molar ratio of the chiral diacid, and the rigid PHB monomer is beneficial to increase the T_gs of the polymers. Copyright © 2013 John Wiley & Sons, Ltd.     

Novel optically active poly(amide-imide)s derived from L-aspartic acid

2,6-Bis-(2,5-dioxo-tetrahydro-N-(4-carboxyphenyl)pyrrol-3-yl)-pyrrolo[3,4-f]isoindole-1,3,5,7-teraone, a chiral diacid, was prepared from pyromellitic anhydride and L-aspartic acid in a three steps reaction pathway. The polycondensation reactions of the monomer with aromatic diamines were carried out in direct condensation reaction conditions. The synthesized poly(amide-imide)s had inherent viscosities in the range of 0.30–0.80 dl/g. Identification of all of the products were performed by conventional analytical techniques such as TLC, IR and ¹H NMR/¹³C MR spectroscopy. Thermoanalytical techniques (TGA/DSC) showed useful levels of thermal stability, associated with relatively high glass transition temperatures and carbonized residues in excess of 40% at 600°C for the synthesized polymers. Amorphous morphology was obtained based on XRD patterns and DSC traces. The polymers were soluble in a variety of polar organic solvents and afforded transparent and relatively flexible to brittle films by solution casting.     

Synthesis,thermal, and photocrosslinking studies of thermotropic liquid crystalline poly(benzylidene‐ether)esters containing α,β‐unsaturated ketone moiety in the main chain

A series of poly(benzylidene‐ether)esters containing a photoreactive benzylidene chromophore in the main chain were synthesized from 2,6‐bis(4‐hydroxy‐3‐methoxybenzylidene)cyclohexanone (BHMBCH) with various aliphatic and aromatic diacid chlorides by an interfacial polycondensation technique. The intrinsic viscosity of the synthesized homo and copolymers determined by Ubbelohde viscometer was found to be 0.12 to 0.17 dL/g. The molecular structure of the monomer and polymers was confirmed by FT‐IR, ¹H NMR, and ¹³C NMR spectral analyses. These polymers were studied for their thermal stability and photochemical properties. Thermal properties were evaluated by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). It was found that the polymers were stable up to 280 °C and start degrading thereafter. Increase in acid methylene spacer length decreased the thermal stability. The self‐extinguishing property of the synthesized polymers was studied by calculating the limiting oxygen index (LOI) value using a Van Krevelen's equation. The influence of the length of methylene spacer on phase transition was investigated using DSC and odd‐even effect has been observed. Hot‐stage optical polarizing microscopic (HOPM) study showed that most of the polymers exhibited birefringence and opalescence properties. The photolysis of liquid crystalline poly(benzylidene‐ether)esters revealed that α,β‐unsaturated ketone moiety in the main chain dimerises through 2π + 2π cycloaddition reaction to form a cyclobutane derivative and leads to crosslinking. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis and properties of novel diisocyanate based optically active polyimides

A new optically active diisocyanate was prepared from the reaction of l-leucine and pyromellitic dianhydride (PMDA) and subsequent transformation of intermediate imide-containing diacid to diisocyanate via Weinstock modification of Curtius rearrangement. Solution polycondensation reaction of the prepared diisocyanate with PMDA, 3,3,4,4-benzophenonetetracarboxylic dianhydride, and hexafluoroisopropylidene 2,2-bis(phthalic anhydride) resulted in the preparation of novel optically active polyimides. The optimal conditions for polyimidations (reaction duration and temperature programming) were obtained via study of the model compound. The monomer, model compound and polymers were characterized by FTIR, ¹HNMR, mass spectroscopy and elemental analysis and their optical and physical properties were studied as well.     

New poly(ester amide ether amide)s from a novel flexible diamine and different diacid chlorides using TMSCl for in situ silylation

A novel flexible diamine with built-in ester, amide and ether groups named terephthalic acid bis(4-{2-[2-(2-amino ethoxy)ethoxy]ethyl carbamoyl}phenyl) ester (TABE), was synthesized via two steps. Nucleophilic reaction of 4-hydroxybenzoic acid with terephthaloyl chloride in the presence of NaOH yielded terephthaloyl bis (4-oxybenzoic) acid (TOBA). The diamine (TABE) was prepared via two direct and indirect methods. In the indirect method TOBA was converted to related diacid chloride and reacted with 1,8-diamino-3,6-dioxaoctane (DADO). Direct method was achieved through the reaction of TOBA with DADO via Yamazaki method. TOBA and TABE were fully characterized and TABE was used to prepare new poly(ester amide ether amide)s through polycondensation with different diacid chlorides in the presence of trimethylchlorosilane (TMSCl). The polymers were characterized using conventional methods and their physical properties including inherent viscosity, thermal behavior, thermal stability, crystallinity, and solubility were studied. The polymers showed good thermal stability and improved solubility.     

New optically active poly(amide–imide)s from N-trimellitylimido-l-amino acid and 1,2-bis[4-aminophenoxy]ethane in the main chain: Synthesis and characterization

Six new optically active poly(amide–imide)s (PAIs) with good inherent viscosities were synthesized from the direct polycondensation reaction of N-trimellitylimido-l-amino acids with 1,2-bis[4-aminophenoxy]ethane by direct polycondensation in a medium consisting of N-methyl-2-pyrrolidone (NMP)/triphenyl phosphite (TPP)/calcium chloride (CaCl₂)/pyridine (py). Diamine was synthesized by using a two-step reaction. At first 1,2-bis[4-nitrophenoxy]ethane was prepared from the reaction of two equimolars 4-nitrophenol and one equimolar 1,2-dibromo ethane and the dinitro compound was reduced by using Pd/C. Also N-trimellitylimido-l-amino acids were synthesized by the condensation reaction of trimellitic anhydride with two equimolars of various l-amino acids in acetic acid solution. The polymerization reactions produced a series of optically active PAIs with a high yield and good inherent viscosity. The resulted polymers were fully characterized by means of FTIR and ¹H NMR spectroscopy, elemental analyses, inherent viscosity, specific rotation, solubility tests, thermogravimetric analysis (TGA), and a derivative of thermogravimetric (DTG) analysis.     

Synthesis and characterization of soluble polyimides derived from 2′,5′‐bis(3,4‐dicarboxyphenoxy)‐p‐terphenyl dianhydride

A novel bis(ether anhydride) monomer, 2′,5′‐bis(3,4‐dicarboxyphenoxy)‐p‐terphenyl dianhydride, was synthesized from the nitro displacement of 4‐nitrophthalonitrile by the phenoxide ion of 2′,5′‐dihydroxy‐p‐terphenyl, followed by alkaline hydrolysis of the intermediate bis(ether dinitrile) and cyclodehydration of the resulting bis(ether diacid). A series of new poly(ether imide)s bearing laterally attached p‐terphenyl groups were prepared from the bis(ether anhydride) with various aromatic diamines via a conventional two‐stage process that included ring‐opening polyaddition to form the poly(amic acid)s followed by thermal or chemical imidization to the poly(ether imide)s. The inherent viscosities of the poly(amic acid) precursors were in the range of 0.62–1.26 dL/g. Most of the poly(ether imide)s obtained from both routes were soluble in polar organic solvents, such as N,N‐dimethylacetamide. All the poly(ether imide)s could afford transparent, flexible, and strong films with high tensile strengths. The glass‐transition temperatures of these poly(ether imide)s were recorded as between 214 and 276 °C by DSC. The softening temperatures of all the poly(ether imide) films stayed in the 207–265 °C range according to thermomechanical analysis. For all the polymers significant decomposition did not occur below 500 °C in nitrogen or air atmosphere. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1008–1017, 2004     

Preparation and characterization of new thermally stable and optically active poly(ester‐imide)s by direct polycondensation with thionyl chloride in pyridine

4,4′‐hexafluoroisopropylidene‐2,2‐bis‐(phthalic acid anhydride) (1) was reacted with L ‐methionine (2) in acetic acid and the resulting N,N′–(4,4′‐hexafluoroisopropylidenediphthaloyl)‐bis‐L ‐methionine (4) was obtained in high yield. The direct polycondensation reaction of this diacid with several aromatic diols such as bisphenol A (5a), phenolphthalein (5b), 1,4‐dihydroxybenzene (5c), 4,4′‐dihydroxydiphenyl sulfide (5d), 4,6‐dihydroxypyrimidine (5e), 4,4′‐dihydroxydiphenyl sulfone (5f) and 2,4′‐dihydroxyacetophenone (5g) was carried out in a system of thionyl chloride and pyridine. Expecting that the reaction with thionyl chloride in pyridine might involve alternative intermediates different from an acyl chloride, the polycondensation at a higher temperature favorable for the reaction of the expected intermediate with nucleophiles was attempted, and a highly thermally stable poly(ester‐imide) was obtained by carrying out the reaction at 80°C. All of the above polymers were fully characterized by ¹H‐NMR, ¹⁹F‐NMR FT‐IR spectroscopy, elemental analysis and specific rotation. Some structural characterization and physical properties of these optically active poly(ester‐ imide)s are reported. Copyright © 2006 John Wiley & Sons, Ltd.