Rapid determination of radiostrontium in large soil samples

A new method for the determination of radiostrontium in large soil samples has been developed at the Savannah River Environmental Laboratory (Aiken, SC, USA) that allows rapid preconcentration and separation of strontium in large soil samples for the measurement of strontium isotopes by gas flow proportional counting. The need for rapid analyses in the event of a radiological dispersive device or improvised nuclear device event is well-known. In addition, the recent accident at Fukushima Nuclear Power Plant in March, 2011 reinforces the need to have rapid analyses for radionuclides in environmental samples in the event of a nuclear accident. The method employs a novel pre-concentration step that utilizes an iron hydroxide precipitation (enhanced with calcium phosphate) followed by a final calcium fluoride precipitation to remove silicates and other matrix components. The pre-concentration steps, in combination with a rapid Sr Resin separation using vacuum box technology, allow very large soil samples to be analyzed for ^89,90Sr using gas flow proportional counting with a lower method detection limit. The calcium fluoride precipitation eliminates column flow problems typically associated with large amounts of silicates in large soil samples.     

Rapid method for determination of radiostrontium in emergency milk samples

A new rapid separation method for radiostrontium in emergency milk samples was developed at the Savannah River Site (SRS) Environmental Bioassay Laboratory (Aiken, SC, USA) that will allow rapid separation and measurement of radiostrontium within 8 hours. The new method uses calcium phosphate precipitation, nitric acid dissolution of the precipitate to coagulate residual fat/proteins and a rapid strontium separation using Sr Resin (Eichrom Technologies, Darien, IL, USA) with vacuum-assisted flow rates. The method is much faster than the previous method that use calcination or cation-exchange pretreatment, has excellent chemical recovery, and effectively removes beta-interferences. When a 100 mL sample aliquot is used with a 20 minute count time, the method has a detection limit of 0.5 Bq·L⁻¹, well below generic emergency action levels.     

Rapid determination of actinides in seawater samples

A new rapid method for the determination of actinides in seawater samples has been developed at the Savannah River National Laboratory. The actinides can be measured by alpha spectrometry or inductively-coupled plasma mass spectrometry. The new method employs novel pre-concentration steps to collect the actinide isotopes quickly from 80 L or more of seawater. Actinides are co-precipitated using an iron hydroxide co-precipitation step enhanced with Ti⁺³ reductant, followed by lanthanum fluoride co-precipitation. Stacked TEVA Resin and TRU Resin cartridges are used to rapidly separate Pu, U, and Np isotopes from seawater samples. TEVA Resin and DGA Resin were used to separate and measure Pu, Am and Cm isotopes in seawater volumes up to 80 L. This robust method is ideal for emergency seawater samples following a radiological incident. It can also be used, however, for the routine analysis of seawater samples for oceanographic studies to enhance efficiency and productivity. In contrast, many current methods to determine actinides in seawater can take 1–2 weeks and provide chemical yields of ~30–60 %. This new sample preparation method can be performed in 4–8 h with tracer yields of ~85–95 %. By employing a rapid, robust sample preparation method with high chemical yields, less seawater is needed to achieve lower or comparable detection limits for actinide isotopes with less time and effort.     

Rapid separation of actinides and radiostrontium in vegetation samples

A new rapid method for the determination of actinides and radiostrontium in vegetation samples has been developed at the Savannah River Site Environmental Lab (Aiken, SC, USA) that can be used in emergency response situations or for routine analysis. The actinides in vegetation method utilizes a rapid sodium hydroxide fusion method, a lanthanum fluoride matrix removal step, and a streamlined column separation process with stacked TEVA, TRU and DGA Resin cartridges. Lanthanum was separated rapidly and effectively from Am and Cm on DGA Resin. Alpha emitters are prepared using rare earth microprecipitation for counting by alpha spectrometry. The purified ⁹⁰Sr fractions are mounted directly on planchets and counted by gas flow proportional counting. The method showed high chemical recoveries and effective removal of interferences. The actinide and ⁹⁰Sr in vegetation sample analysis can be performed in less than 8 h with excellent quality for emergency samples. The rapid fusion technique is a rugged sample digestion method that ensures that any refractory actinide particles or vegetation residue after furnace heating is effectively digested.     

Rapid method for the determination of radiostrontium in milk

A radiochemical procedure comprising ion chromatography for preconcentration, oxalate precipitation for alkali/alkaline earth separation, strontium specific extraction chromatography with a crown ether for calcium/strontium separation, carbonate precipitation for counting on a low background proportional counter, provides a simple, rapid (48 h) and effective method for radiostrontium determination in emergency situation in milk. The separation scheme gives a strontium recovery rate of 62% and an empiric relative standard deviation of 11%. The detection limit for 500 ml milk and 3600-second counting time is 0.090 Bq^.l^-1.     

Sequential determination of actinide isotopes and radiostrontium in swipe samples

Assays of alpha- and beta-emitting radionuclides in swipe samples are often required to monitor the presence of removable surface contamination for radiological protection and control in nuclear facilities. Swipe analysis has also proven to be a very sensitive analytical technique to detect nuclear signatures for safeguard verification purposes. A new sequential method for the determination of actinide isotopes and radiostrontium in swipe samples, which utilizes a streamlined column separation with stacked anion and extraction chromatography resins, has been developed. To validate the separation procedure, spike and blank samples were prepared and analyzed by inductively coupled mass spectrometry (ICP-MS), alpha spectrometry and liquid scintillation (LS) counting. Low detection limits have been achieved for isotopic analysis of Pu (²³⁸Pu, ²³⁹Pu, ²⁴⁰Pu, ²⁴¹Pu), U (²³⁴U, ²³⁵U, ²³⁸U), Am (²⁴¹Am), Cm (²⁴²Cm, ^243/244Cm) and Sr (⁹⁰Sr) at ultra-trace concentration levels in swipe samples.     

Rapid trace determination of radiostrontium in milk and drinking water

A rapid method for determining traces of radiostrontium in milk and drinking water is described. The technique involves a batch treatment of the milk sample with a cation exchanger (DOWEX 50W X8) followed by a solvent extraction with a crown ether (DC18C6) and a precipitation of SrCO₃. In the case of water, the strontium is extracted directly with the crown ether. The average separation yield is 74% for milk and 91% for water. The overall separation procedure takes about 8 hours. Activities as low as 0.03 Bq/1 can be determined with a low background GM-counter.     

Rapid determination of strontium-90 in seawater

It is shown that Y₂O₃, YF₃, LaF₃, and CeF₃ help concentrate ⁹⁰Y from seawater. To determine ⁹⁰Sr, YF₃ is the best reagent because the effect of interfering lead and thorium radioisotopes is minimum in this case. It is proposed to preconcentrate ²¹⁰Bi on PbS to eliminate its interference. To determine ⁹⁰Sr we measure the Cherenkov radiation of ⁹⁰Y concentrated on YF₃ without prior elution.     

Fast method for the determination of radiostrontium and plutonium isotopes in food samples

Rapid radioanalytical methods are important in the case of a radiological emergency and for the defence against nuclear hazards, especially for pure alpha and beta emitters like ^239/240Pu and ⁸⁹Sr/⁹⁰Sr. A new fast method was developed with an overall analysis time altogether around 11 h, for only strontium isotopes about 7 h. The method combines two extraction chromatography resins, DGA- and Sr-resin, to separate mainly strontium and plutonium. A broad variety of food samples with different fat, carbohydrate and protein contents were tested and successfully analysed. The yields obtained were typically around 95% and 70% for ⁹⁰Sr and ²⁴²Pu.

     

Rapid method for radiostrontium determination in milk in emergency situations using PS resin

This study describes a new and rapid procedure for radiostrontium determination in milk samples based on the use of plastic scintillation resins (PS resins). The proposed method reduces the time of analysis by at least 2 h by combining separation and measurement preparation into a single step and optimizing the pre-treatment steps. The method is robust and reproducible, with good total recoveries (65% on average) and a relative bias for total radiostrontium activity (⁸⁹Sr + ⁹⁰Sr) below 7%. The minimum detectable activity for 100 mL of milk sample measured for 60 min is about 0.34 Bq L^?1. The proposed method can quantify radiostrontium content in 5 h, which makes it suitable for use in emergency situations.     

Rapid determination of actinides in asphalt samples

A new rapid method for the determination of actinides in asphalt samples has been developed that can be used in emergency response situations or for routine analysis. If a radiological dispersive device, improvised nuclear device or a nuclear accident such as the accident at the Fukushima Nuclear Power Plant in March, 2011 occurs, there will be an urgent need for rapid analyses of many different environmental matrices, including asphalt materials, to support dose mitigation and environmental clean-up. The new method for the determination of actinides in asphalt utilizes a rapid furnace step to destroy bitumen and organics present in the asphalt and sodium hydroxide fusion to digest the remaining sample. Sample preconcentration steps are used to collect the actinides and a new stacked TRU Resin + DGA Resin column method is employed to separate the actinide isotopes in the asphalt samples. The TRU Resin plus DGA Resin separation approach, which allows sequential separation of plutonium, uranium, americium and curium isotopes in asphalt samples, can be applied to soil samples as well.     

Rapid determination of fluorine in solid samples

A rapid method for the determination of fluorine in various matrices of geochemical and environmental interest is described. After fusion with NaOH, the sample is dissolved by means of tiron (= pyrocatechol-3,5-disulfonic acid, disodium salt), which acts both as buffer substance and as superior masking agent for cations exhibiting strong complexes with fluoride, e.g. Al, Fe, Ti etc. The final determination is done by means of the fluoride sensitive electrode without further separation.The applicability of the method has been checked for various silicates, bauxite, phosphates, soils, coal and plant material. A detection limit of 10 µg/g can be achieved, which is sufficient in many cases. The overall precision is better than ±10%.Dedicated to Prof. Dr.K. L. Komarek on occasion of his 60th birthday.     

Rapid and accurate determination of thallium in seawater using SF-ICP-MS

We present a method for the rapid and direct determination of dissolved Thallium (Tl) using high resolution sector field inductively coupled mass spectrometry (SF-ICP-MS) suitable for the measurement of large time series (e.g. during monitoring). Thallium data are presented for a series of natural sea water samples, which were validated with sea water standards CASS-4 and NASS-5. The sea water samples and standards were diluted 10 times prior to measurement with SF-ICP-MS in low resolution mode (R = 300, LR). For both CASS-4 and NASS-5 (salinity of 30.5) we calculated a concentration of about 11 ng L⁻¹ when using Tl values of 14 ± 2 ng L⁻¹ (at salinity of 35 ± 1) published by Flegal and Patterson [1] for Atlantic and Pacific sea water. For CASS-4 we report a Tl value of 10.6 ± 0.7 ng L⁻¹ (n = 70), for NASS-5 a Tl value of 10.3 ± 0.8 ng L⁻¹ (n = 11). For Tl in both CASS-4 and NASS-5, the overall error in accuracy and precision is less than 4% and 8% (2 s), respectively. Further, values of 7.7 ± 0.3 and 6.7 ± 0.2 ng L⁻¹ Tl were found for the estuarine standard SLEW-3 (salinity of 15) and the river water standard SLRS-4, respectively, for which no certified value exists so far. The detection and quantification limits of our method are 0.1 and 0.3 ng L⁻¹, respectively. Slight differences in the accuracy of our method and other published methods for the determination of Tl in sea water are discussed. Time-series of natural coastal water samples gave Tl values (6-12 ng L⁻¹), which correspond to determined salinities, and hence, appear realistic and oceanographically consistent.     

Rapid determination of 226Ra in environmental samples

A new rapid method for the determination of ²²⁶Ra in environmental samples has been developed at the Savannah River Site Environmental Lab (Aiken, SC, USA) that can be used for emergency response or routine sample analyses. The need for rapid analyses in the event of a Radiological Dispersive Device or Improvised Nuclear Device event is well-known. In addition, the recent accident at Fukushima Nuclear Power Plant in March, 2011 reinforces the need to have rapid analyses for radionuclides in environmental samples in the event of a nuclear accident. ²²⁶Ra (T1/2?=?1,620?years) is one of the most toxic of the long-lived alpha-emitters present in the environment due to its long life and its tendency to concentrate in bones, which increases the internal radiation dose of individuals. The new method to determine ²²⁶Ra in environmental samples utilizes a rapid sodium hydroxide fusion method for solid samples, calcium carbonate precipitation to preconcentrate Ra, and rapid column separation steps to remove interferences. The column separation process uses cation exchange resin to remove large amounts of calcium, Sr Resin to remove barium and Ln Resin as a final purification step to remove ²²⁵Ac and potential interferences. The purified ²²⁶Ra sample test sources are prepared using barium sulfate microprecipitation in the presence of isopropanol for counting by alpha spectrometry. The method showed good chemical recoveries and effective removal of interferences. The determination of ²²⁶Ra in environmental samples can be performed in less than 16?h for vegetation, concrete, brick, soil, and air filter samples with excellent quality for emergency or routine analyses. The sample preparation work takes less than 6?h. ²²⁵Ra (T1/2?=?14.9?day) tracer is used and the ²²⁵Ra progeny ²¹⁷At is used to determine chemical yield via alpha spectrometry. The rapid fusion technique is a rugged sample digestion method that ensures that any refractory radium particles are effectively digested. The preconcentration and column separation steps can also be applied to aqueous samples with good results.     

Rapid determination of 210Po in water samples

A new rapid method for the determination of ²¹⁰Po in water samples has been developed at the Savannah River National Laboratory (SRNL) that can be used for emergency response or routine water analyses. If a radiological dispersive device event or a radiological attack associated with drinking water supplies occurs, there will be an urgent need for rapid analyses of water samples, including drinking water, ground water and other water effluents. Current analytical methods for the assay of ²¹⁰Po in water samples have typically involved spontaneous auto-deposition of ²¹⁰Po onto silver or other metal disks followed by counting by alpha spectrometry. The auto-deposition times range from 90 min to 24 h or more, at times with yields that may be less than desirable. If sample interferences are present, decreased yields and degraded alpha spectrums can occur due to unpredictable thickening in the deposited layer. Separation methods have focused on the use of Sr Resin?, often in combination with ²¹⁰Pb analysis. A new rapid method for ²¹⁰Po in water samples has been developed at the SRNL that utilizes a rapid calcium phosphate co-precipitation method, separation using DGA Resin^® (N,N,N′,N′ tetraoctyldiglycolamide extractant-coated resin, Eichrom Technologies or Triskem-International), followed by rapid microprecipitation of ²¹⁰Po using bismuth phosphate for counting by alpha spectrometry. This new method can be performed quickly with excellent removal of interferences, high chemical yields and very good alpha peak resolution, eliminating any potential problems with the alpha source preparation for emergency or routine samples. A rapid sequential separation method to separate ²¹⁰Po and actinide isotopes was also developed. This new approach, rapid separation with DGA resin plus microprecipitation for alpha source preparation, is a significant advance in radiochemistry for the rapid determination of ²¹⁰Po.     

Rapid determination of actinides in emergency food samples

A new rapid method for the determination of actinides in food samples has been developed at the Savannah River Site Environmental Lab (Aiken, SC, USA) that can be used for emergency response or routine food samples. If a radiological dispersive device or improvised nuclear device event occurs, there will be a urgent need for rapid analyzes of many different environmental matrices, as well as food samples, to support dose mitigation and protect general populations from radioactivity that may enter the food chain. The recent accident at Fukushima nuclear power plant in March, 2011 reinforces the need to have rapid analyzes for radionuclides in environmental and food samples. The new method to determine actinides in food samples utilizes a furnace ashing step, a rapid sodium hydroxide fusion method, a lanthanum fluoride matrix removal step, and a column separation process with stacked TEVA, TRU, and DGA resin cartridges. The furnace ashing and rapid fusion steps are performed in relatively inexpensive, reusable zirconium crucibles. Alpha emitters are prepared using rare earth micro precipitation for counting by alpha spectrometry. The method showed high chemical recoveries and effective removal of interferences. The determination of actinides in food samples can be performed in less than 8 h for 10 g samples with excellent quality for emergency samples using short count times. Larger food samples (100 g) may be processed in 24 h or less. The rapid fusion technique is a rugged sample digestion method that ensures that any refractory actinide particles are effectively digested. This method can be used to meet the derived intervention level guidelines recommended by the U.S. Food and Drug Administrations.     

Rapid determination of bromide in seawater samples by capillary ion chromatography using monolithic silica columns modified with cetyltrimethylammonium ion

Monolithic silica capillary columns dynamically modified with quaternary ammonium ions were evaluated for the determination of bromide in seawater samples. A quaternary ammonium ion such as cetyltrimethylammonium ion was dynamically introduced onto monolithic silica surfaces. The first layer of the modifier was introduced by electrostatic interaction, whereas the second layer was introduced by hydrophobic interaction. The latter layer worked as the anion-exchange sites. The modified monolithic silica capillary columns could be used for rapid separation of inorganic anions. Separation of authentic mixture of five anions was achieved within a few minutes. The addition of small amount of the modifier in the eluent improved the repeatability of the retention time. Seawater samples could be directly injected onto the prepared capillary columns, and bromide could be determined to be 63 mg/L.     

Rapid methods for radiostrontium determination in aerosol filters and vegetation in emergency situations using PS resin

Journal of Radioanalytical and Nuclear Chemistry - This study describes a rapid and novelty method for radiostrontium determination in aerosol filters and vegetation based on the use of plastic...