BiVO4‐TiO2 Composite Photocatalysts for Dye Degradation Formed Using the SILAR Method

Composite photocatalyst films have been fabricated by depositing BiVO₄ upon TiO₂ via a sequential ionic layer adsorption reaction (SILAR) method. The photocatalytic materials were investigated by XRD, TEM, UV/Vis diffuse reflectance, inductively coupled plasma optical emission spectrometry (ICP‐OES), XPS, photoluminescence and Mott–Schottky analyses. SILAR processing was found to deposit monoclinic‐scheelite BiVO₄ nanoparticles onto the surface, giving successive improvements in the films′ visible light harvesting. Electrochemical and valence band XPS studies revealed that the prepared heterojunctions have a type II band structure, with the BiVO₄ conduction band and valence band lying cathodically shifted from those of TiO₂. The photocatalytic activity of the films was measured by the decolourisation of the dye rhodamine 6G using λ>400 nm visible light. It was found that five SILAR cycles was optimal, with a pseudo‐first‐order rate constant of 0.004 min^?1. As a reference material, the same SILAR modification has been made to an inactive wide‐band‐gap ZrO₂ film, where the mismatch of conduction and valence band energies disallows charge separation. The photocatalytic activity of the BiVO₄–ZrO₂ system was found to be significantly reduced, highlighting the importance of charge separation across the interface. The mechanism of action of the photocatalysts has also been investigated, in particular the effect of self‐sensitisation by the model organic dye and the ability of the dye to inject electrons into the photocatalyst′s conduction band.     

Visible Light Photocatalytic Activity of Pt/N‐TiO2 towards Enhanced H2 Production from Water Splitting

Present work mainly focuses on experimental investigation to improvement of hydrogen production by water photoelectrolysis. An experimental facility was designed and constructed for visible light photocatalysis. A series of N‐TiO₂ photocatalysts impregnated with platinum on the surface of N‐TiO₂ were prepared. Hydrogen production upon irradiating aqueous Pt/N‐TiO₂ suspension with visible light was investigated. The shift in excitation wavelength of TiO₂ was 380 nm improved the yield of hydrogen production by N‐TiO₂ and Pt/N‐TiO₂. We used a 400 W mercury arc lamp combined with a 400 nm cutoff filter eliminating all the wavelengths under 400 nm. Pt/N‐TiO₂ material was characterized with TPR, reflective UV/Visible spectroscopy and TEM. The best hydrogen production rate obtained for this setup for N/Ti = 10, 0.05 wt% Pt/N‐TiO₂, through water splitting was about 772 μmolh^?1g^?1.     

Control of Spatially Homogeneous Distribution of Heteroatoms to Produce Red TiO2 Photocatalyst for Visible-Light Photocatalytic Water Splitting

The strong band-to-band absorption of photocatalysts spanning the whole visible-light region (400–700 nm) is critically important for solar-driven photocatalysis. Although it has been actively and widely used as a photocatalyst for various reactions in the past four decades, TiO₂ has a very poor ability to capture the whole spectrum of visible light. In this work, by controlling the spatially homogeneous distribution of boron and nitrogen heteroatoms in anatase TiO₂ microspheres with a predominance of high-energy {001} facets, a strong visible-light absorption spectrum with a sharp edge beyond 680 nm has been achieved. The red TiO₂ obtained with homogeneous doping of boron and nitrogen shows no increase in defects like Ti³⁺ that are commonly observed in doped TiO₂. More importantly, it has the ability to induce photocatalytic water oxidation to produce oxygen under the irradiation of visible light beyond 550 nm and also the photocatalytic reduction of water to produce hydrogen under visible light. These results demonstrate the great promise of using red TiO₂ for visible-light photocatalytic water splitting and also reveal an attractive strategy for realizing the wide-spectrum visible-light absorption of wide-band-gap oxide photocatalysts.     

Photocatalyst Materials for Water Splitting

Various photocatalyst materials developed by the group of the present author are described. Alkali and alkaline earth tantalates have arisen as a new group of photocatalyst materials for splitting of water into H₂ and O₂ under ultraviolet irradiation. They showed activities even without co-catalysts such as Pt, being different from titanate photocatalysts. When NiO co-catalysts were loaded on the tantalate photocatalysts, the photocatalytic activities were markedly increased. Among the tantalates, NiO/NaTaO₃ doped with La showed the highest activity. BiVO₄, AgNO₃, and TiO₂ co-doped with Cr and Sb photocatalysts showed high activities for O₂ evolution in the presence of a sacrificial reagent (Ag⁺) under visible light irradiation ( > 420 nm). Pt/SrTiO₃ co-doped with Cr and Sb or Ta, Pt/NaInS₂, and Pt/AgInZn₇S₉ photocatalysts showed high activities for H₂ evolution from aqueous solutions containing reducing reagents under visible light irradiation. Furthermore, Cu- or Ni-doped ZnS photocatalysts showed H₂ evolution activities even without co-catalysts such as Pt.     

Prussian Blue Type Cocatalysts for Enhancing the Photocatalytic Water Oxidation Performance of BiVO4

The efficiency of photocatalytic overall water splitting reactions is usually limited by the high energy barrier and complex multiple electron-transfer processes of the oxygen evolution reaction (OER). Although bismuth vanadate (BiVO₄) as the photocatalyst has been developed for enhancing the kinetics of the water oxidation reaction, it still suffers from challenges of fast recombination of photogenerated electron-hole pairs and poor photocatalytic activity. Herein, six M^II-Co^III Prussian blue analogues (PBAs) (M=Mn, Fe, Co, Ni, Cu and Zn) cocatalysts are synthesized and deposited on the surface of BiVO₄ for boosting the surface catalytic efficiency and enhancing photogenerated carries separation efficiency of BiVO₄. Six M^II-Co^III PBAs@BiVO₄ photocatalysts all demonstrate increased photocatalytic water oxidation performance compared to that of BiVO₄ alone. Among them, the Co−Co PBA@BiVO₄ photocatalyst is employed as a representative research object and is thoroughly characterized by electrochemistry, electronic microscope as well as multiple spectroscopic analyses. Notably, BiVO₄ coupling with Co−Co PBA cocatalyst could capture more photons than that of pure BiVO₄, facilitating the transfer of photogenerated charge carriers between BiVO₄ and Co−Co PBA as well as the surface catalytic efficiency of BiVO₄. Overall, this work would promote the synthesis strategy development for exploring new types of composite photocatalysts for water oxidation.     

A Hydrogen Farm Strategy for Scalable Solar Hydrogen Production with Particulate Photocatalysts

Scalable solar hydrogen production by water splitting using particulate photocatalysts is promising for renewable energy utilization. However, photocatalytic overall water splitting is challenging owing to slow water oxidation kinetics, severe reverse reaction, and H₂/O₂ gas separation. Herein, mimicking nature photosynthesis, a practically feasible approach named Hydrogen Farm Project (HFP) is presented, which is composed of solar energy capturing and hydrogen production subsystems integrated by a shuttle ion loop, Fe³⁺/Fe²⁺. Well‐defined BiVO₄ crystals with precisely tuned {110}/{010} facets are ideal photocatalysts to realize the HFP, giving up to 71 % quantum efficiency for photocatalytic water oxidation and full forward reaction with nearly no reverse reaction. An overall solar‐to‐chemical efficiency over 1.9 % and a solar‐to‐hydrogen efficiency exceeding 1.8 % could be achieved. Furthermore, a scalable HFP panel for solar energy storage was demonstrated under sunlight outdoors.     

Photodegradation of Rhodamine B on Sulfur Doped ZnO/TiO2 Nanocomposite Photocatalyst under Visible-light Irradiation

Sulfur doped ZnO/TiO₂ nanocomposite photocatalysts were synthesized by a facile sol‐gel method. The structure and properties of catalysts were characterized by X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS), UV‐vis diffusive reflectance spectroscopy (DRS) and N₂ desorption‐adsorption isotherm. The XRD study showed that TiO₂ was anatase phase and there was no obvious difference in crystal composition of various S‐ZnO/TiO₂. The XPS study showed that the Zn element exists as ZnO and S atoms form SO^2?₄. The prepared samples had mesoporosity revealed by N₂ desorption‐adsorption isotherm result. The degradation of Rhodamine B dye under visible light irradiation was chosen as probe reaction to evaluate the photocatalytic activity of the ZnO/TiO₂ nanocomposite. The commercial TiO₂ photocatalyst (Degussa P25) was taken as standard photocatalyst to contrast the prepared different photocatalyst in current work. The improvement of the photocatalytic activity of S‐ZnO/TiO₂ composite photocatalyst can be attributed to the suitable energetic positions between ZnO and TiO₂, the acidity site caused by sulfur doping and the enlargement of the specific area. S‐3.0ZnO/TiO₂ exhibited the highest photocatalytic activity under visible light irradiation after Zn amount was optimized, which was 2.6 times higher than P25.     

Enhanced Photoelectrochemical Water Splitting through Bismuth Vanadate with a Photon Upconversion Luminescent Reflector

As the performance of photoanodes for solar water splitting steadily improves, the extension of the absorption wavelength in the photoanodes is highly necessary to substantially improve the water splitting. We use a luminescent back reflector (LBR) capable of photon upconversion (UC) to improve the light harvesting capabilities of Mo:BiVO₄ photoelectrodes. The LBR is prepared by dispersing the organic dye pair meso‐tetraphenyltetrabenzoporphine palladium and perylene capable of triplet–triplet annhilation‐based UC in a polymer film. The LBR converts the wavelengths of 600–650 nm corresponding to the sub‐band gap of Mo:BiVO₄ and the wavelengths of 350–450 nm that are not sufficiently absorbed in Mo:BiVO₄ to a wavelength that can be absorbed by a Mo:BiVO₄ photoelectrode. The LBR improves the water splitting reaction of Mo:BiVO₄ photoelectrodes by 17 %, and consequently, the Mo:BiVO₄/LBR exhibits a photocurrent density of 5.25 mA cm^?2 at 1.23 V versus the reversible hydrogen electrode. The Mo:BiVO₄/LBR exhibits hydrogen/oxygen evolution corresponding to the increased photocurrent density and long‐term operational stability for the water splitting reaction.     

Efficient One-Pot Microwave-Assisted Hydrothermal Synthesis of Nitrogen-Doped TiO2 for Hydrogen Production by Photocatalytic Water Splitting

Develop a photocatalyst system for solar energy conversion to electric energy or chemical energy is a topic of great interest for fundamental and practical importance. In this study, nitrogen-doped TiO₂ with high hydrogen production by photocatalytic water splitting were prepared by microwave-assisted hydrothermal method using titanium sulfate as precursor in the presence of urea. The nitrogen doped TiO₂ prepared in this study was pure anatase phase with a high surface area (372?m²?g^?1) and showed a very high hydrogen evolution rate of water splitting reaction under UV light irradiation (4,386?μmol?g^?1?h^?1) and visible light irradiation (185?μmol?g^?1?h^?1) which was about 15?times higher than commercial TiO₂ (Degussa P25).     

Multi‐Electron Oxygen Reduction by a Hybrid Visible‐Light‐Photocatalyst Consisting of Metal‐Oxide Semiconductor and Self‐Assembled Biomimetic Complex

Adsorption experiments and density functional theory (DFT) simulations indicated that Cu(acac)₂ is chemisorbed on the monoclinic sheelite (ms)‐BiVO₄ surface to form an O₂‐bridged binuclear complex (OBBC/BiVO₄) like hemocyanin. Multi‐electron reduction of O₂ is induced by the visible‐light irradiation of the OBBC/BiVO₄ in the same manner as a blue Cu enzyme. The drastic enhancement of the O₂ reduction renders ms‐BiVO₄ to work as a good visible‐light photocatalyst without any sacrificial reagents. As a model reaction, we show that this biomimetic hybrid photocatalyst exhibits a high level of activity for the aerobic oxidation of amines to aldehydes in aqueous solution and imines in THF solution at 25 °C giving selectivities above 99 % under visible‐light irradiation.     

Three‐Dimensional Ordered Assembly of Thin‐Shell Au/TiO2 Hollow Nanospheres for Enhanced Visible‐Light‐Driven Photocatalysis

An Au/TiO₂ nanostructure was constructed to obtain a highly efficient visible‐light‐driven photocatalyst. The design was based on a three‐dimensional ordered assembly of thin‐shell Au/TiO₂ hollow nanospheres (Au/TiO₂‐3 DHNSs). The designed photocatalysts exhibit not only a very high surface area but also photonic behavior and multiple light scattering, which significantly enhances visible‐light absorption. Thus Au/TiO₂‐3 DHNSs exhibit a visible‐light‐driven photocatalytic activity that is several times higher than conventional Au/TiO₂ nanopowders.     

球形、花形和线状钒酸铋的可控合成及光催化性能

通过无模板、无助剂的可控水热法, 制备出球形、花形和线状钒酸铋(BiVO₄), 研究了其光学和可见光催化性能. 通过X射线衍射(XRD)和透射电镜(TEM)观测其结构和形貌特征. XRD谱线显示, 所制备的样品为单斜晶体结构. TEM结果表明, 通过控制水热过程的反应参数可以得到不同形貌的纳米粉体. 基于不同条件下制备的样品的微结构分析, 提出了这些不同形貌的形成机制. 紫外-可见漫反射光谱(UV-Vis DRS)表明BiVO₄样品的带隙能约为2.19-2.33 eV. 利用可见光(λ>420 nm)照射下的罗丹明B(RhB)降解实验评价了BiVO₄样品的光催化性能. 结果表明, BiVO₄的光催化活性比商用TiO₂催化剂P25 和掺氮TiO₂ (N-TiO₂)高得多. 所制备的球形BiVO₄光催化效率最高, 经可见光照射180 min, RhB溶液的降解率可达100%. 系统地研究了结构和形貌对不同pH值下制备的BiVO₄样品光催化活性的影响.     

Production of Hydrogen by Glycerol Photoreforming Using Binary Nitrogen–Metal‐Promoted N‐M‐TiO2 Photocatalysts

The need for renewable energy focuses attention on hydrogen obtained by using sustainable and green methods. The sustainable compound glycerol can be used for hydrogen production by heterogeneous photocatalysis. A novel approach involves the promotion of the TiO₂ photocatalyst with a binary combination of nitrogen and transition metal. We report the synthesis and spectroscopic characterization of the new N‐M‐TiO₂ photocatalysts (M=none, Cr, Co, Ni, Cu), and the photocatalytic reforming of glycerol to hydrogen under ambient conditions and near‐UV or visible light versus benchmark P25 TiO₂. In units of activity μmol m^?2 h^?1, N‐Ni‐TiO₂ is five‐fold more active than P25, and N‐Cu‐TiO₂ is 44‐fold more active. The photocatalytic activity of N‐M‐TiO₂ increases from Cr to Co and Ni, whereas the photoluminescence decreases; the change in activity is due to the modulation of charge recombination.     

TiO2/BiVO4, a Heterojuncted Microfiber with Enhanced Photocatalytic Performance for Methylene Blue under Visible Light Irradiation

Novel TiO₂/BiVO₄ microfiber heterojunctions were constructed using cotton as biomorphic templates. The as-synthesized samples were characterized by scanning electron microscope, X-ray diffraction, X-ray photoelectron spectroscopy, UV-Vis diffuse reflectance spectra and photocatalytic experiment. The morphology of the as-synthesized TiO₂/BiVO₄ composites was consisted of a large quantity of microfiber structures with diameter from 2.5 μm to 5 μm, and the surface of samples became more coarse and compact with the increase of weight ratio of TiO₂. The TiO₂/BiVO₄ samples with proper content (10.00wt%) showed the highest pho-tocatalytic degradation activity for methylene blue (MB) degradation among all the samples under visible light, and 88.58%MB could be degraded within 150 min. The enhancement of photocatalytic activity was mainly attributed to the formation of n-n heterojunction at the contact interface of TiO₂ and BiVO₄, which not only narrowed the band gap of BiVO₄ for extending the absorption range of visible light, but also promoted the transfer of charge carriers across interface. A possible photodegradation mechanism of MB in the presence of TiO₂/BiVO₄ microfibrous photocatalyst was proposed.     

Enhanced photocatalytic hydrogen production performance of pillararene-doped mesoporous TiO2 with extended visible-light response

Pillararenes are a new type of supramolecular hosts,and they have been widely applied in drug delivery,catalysis,separation process,and sensors.However,they have rarely been used to produce hydrogen.Here,we report that pillararenes were used as functional molecules to explore photocatalysts and efficiently promoted hydrogen production from water.The most common and easily synthesized pdimethoxy pillar[5]arene（PI-OMe） was employed to form an organic-inorganic hybrid material with titanium dioxide...     

Hydrothermal Synthesis and Characterization of Visible-Light-Driven Dumbbell-Like BiVO4 and Ag/BiVO4 Photocatalysts

Visible-light-driven dumbbell-like BiVO₄ and Ag/BiVO₄ photocatalysts has been successfully synthesized by a simple hydrothermal method at 180 °C for 24 h. The as-synthesized photocatalysts were characterized by X-ray powder diffraction, scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy and UV–Vis absorption spectroscopy. The results obtained showed that ethylenediamine, citric acid, pH and hydrothermal reaction temperature have pronounced effects on the morphology of BiVO₄. Transmission electron microscopy observation shows that the Ag nanoparticles are homogenously dispersed on the surface of the BiVO₄ nanorods. Photocatalytic activities of the dumbbell-like BiVO₄ and Ag-loaded BiVO₄ photocatalysts were also evaluated by using methylene blue as a representative dye indicator under visible light irradiation. It is found that the photocatalytic performance of the as-synthesized BiVO₄ is obviously improved with the incorporation of the Ag nanoparticles. Mechanism for the enhancement of the photocatalytic activity of the Ag/BiVO₄ photocatalyst is also discussed.     

Simulated Sunlight-Driven Degradation of Rhodamine B by Porous Peanut-Like TiO2/BiVO4 Composite

Porous peanut-like TiO₂/BiVO₄ composite nanostructures were synthesized via a template-free hydrothermal process with bismuth nitrate, ammonium metavanadate and anatase TiO₂ as raw materials. The crystal structures, morphologies, and optical properties of the as-prepared samples were characterized by X-ray powder diffraction, transmission electron microscope, scanning electron microscopy, X-ray photoelectron spectroscopy and UV–visible absorption spectra. Simulated sun-light induced photocatalytic degradation of Rhodamine B by porous peanut-like TiO₂/BiVO₄ nanostructures in the absence and presence of H₂O₂ has been investigated, and the results show these porous composite nanostructures with higher photocatalytic activity than pure BiVO₄ and anatase TiO₂. When TiO₂/BiVO₄ heterostructures were used as the photocatalysts under simulated sun-light irradiation, BiVO₄ could act as a sensitizer to absorb the visible light. Meanwhile, coupling different band-gap semiconductors of TiO₂ and BiVO₄, the compound facilitate separation of the photogenerated carriers under the internal field induced by the different electronic band structures of semiconductors.     

Ion engineering techniques for the preparation of the highly effective TiO<Subscript>2</Subscript> photocatalysts operating under visible light irradiation

The successful application of ion engineering techniques for the development of TiO₂ photocatalysts operating under visible and/or solar light irradiations has been summarized in this review article. First, we have physically doped various transition metal ions within a TiO₂ lattice on an atomic level by using an advanced metal ion implantation method. The metal ion implanted TiO₂ could efficiently work as a photocatalyst under visible light irradiation. Some field tests under solar light irradiation clearly revealed that the Cr or V ions implanted TiO₂ samples showed 2–3 times higher photocatalytic reactivity than the un-implanted TiO₂. Second, we have developed the visible light responsive TiO₂ thin film photocatalyst by a single process using an RF-magnetron sputtering (RF-MS) deposition method. The vis-type TiO₂ thin films showed high photocatalytic reactivity for various reactions such as reduction of NOx, degradation of organic compounds, and splitting of H₂O under visible and/or solar light irradiations.     

Two‐Dimensional Perovskite Oxynitride K2LaTa2O6N with an H+/K+ Exchangeability in Aqueous Solution Forming a Stable Photocatalyst for Visible‐Light H2 Evolution

Undoped layered oxynitrides have not been considered as promising H₂‐evolution photocatalysts because of the low chemical stability of oxynitrides in aqueous solution. Here, we demonstrate the synthesis of a new layered perovskite oxynitride, K₂LaTa₂O₆N, as an exceptional example of a water‐tolerant photocatalyst for H₂ evolution under visible light. The material underwent in‐situ H⁺/K⁺ exchange in aqueous solution while keeping its visible‐light‐absorption capability. Protonated K₂LaTa₂O₆N, modified with an Ir cocatalyst, exhibited excellent catalytic activity toward H₂ evolution in the presence of I^? as an electron donor and under visible light; the activity was six times higher than Pt/ZrO₂/TaON, one of the best‐performing oxynitride photocatalysts for H₂ evolution. Overall water splitting was also achieved using the Ir‐loaded, protonated K₂LaTa₂O₆N in combination with Cs‐modified Pt/WO₃ as an O₂ evolution photocatalyst in the presence of an I₃^?/I^? shuttle redox couple.     

BiVO4/TiO2 core-shell heterostructure: wide range optical absorption and enhanced photoelectrochemical and photocatalytic performance

In the present study, pristine BiVO₄, TiO₂ and BiVO₄/TiO₂ core-shell heterostructured nanoparticles are prepared by hydrothermal methods and studied for structural, morphological, optical, photoelectrochemical water splitting and photocatalytic degradation of methylene blue as an organic pollutant. Both pristine BiVO₄ and TiO₂ exhibit poor PEC and PC performance under visible light illumination. However, an enhanced PEC and PC activity in BiVO₄/TiO₂ core-shell heterostructure is observed due to high solar energy absorption and superior charge separation properties in core-shell nanoparticles. The photoelectrode prepared using BiVO₄/TiO₂ core-shell nanoparticles exhibit a photocathode behavior and produced cathodic photocurrent, however, the pristine BiVO₄ and TiO₂ photoelectrodes act as photoanode and produced anodic photocurrent. This behavior of change in current direction is also observe in the Mott-Schottky analysis where the BiVO₄/TiO₂ core-shell nanoparticles photoelectrode exhibits the positive slow showing p-type semiconducting behavior. The change in cathodic photoresponse in core-shell nanoparticles in comparison to anodic photoresponse of BiVO₄ and TiO₂ nanoparticles is explained in terms of the variations in the work function values. These results highlight the advantages of core-shell nanoparticle of suitable materials for photocatalytic and photoelectrochemical applications.