A Facile method to Prepare Monodispersed CdS/SiO2 Composite Microspheres and Investigation on Their Photocatalytic Properties

This article presents a facile method to prepare CdS/SiO₂ composite microspheres and their good catalytic properties. In our method, monodispersed SiO₂ particles bearing amino groups (–NH₂) were synthesized at first and then used as carriers to load nanosized CdS particles to form CdS/SiO₂ composite microspheres. With the addition of CdAc₂ solution to the SiO₂ dispersion, Cd²⁺ was attracted to the surfaces of the SiO₂ particles through coordination interaction, and then thioacetamide was added to the dispersion. By heating, S^2? released and reacted with the Cd²⁺, CdS/SiO₂ composite microspheres were obtained accordingly. The photocatalytic properties of the as‐prepared composite microspheres were investigated as well. It was found that the composite microspheres have excellent photocatalytic activities for the degradation of dyes comparing with the commercial P‐25 TiO₂ catalysts. After using and recycling for three times, the photocatalytic performance still remained very well.     

Facile Fabrication of Porous ZnS and ZnO Films by Coaxial Electrospinning for Highly Efficient Photodegradation of Organic Dyes

Porous ZnS and ZnO nano‐crystal films were fabricated via a three‐step procedure. First, Zn(CH₃COO)₂/Silk Fibroin nanofiber mats were prepared by coaxial electrospinning. Second, Zn(CH₃COO)₂/Silk Fibroin mats were immersed in NaS solution to react with S²⁻ to obtain ZnS/Silk Fibroin nanofiber mats. Finally, ZnO porous films were prepared by calcination of ZnS/Silk Fibroin composite mat at 600°C in air atmosphere. When ZnS/Silk Fibroin mats were calcinated in nitrogen, ZnS/Carbon composite mats were obtained accordingly. The resulting porous films were fully characterized. The ZnO porous films were the aggregation of ZnO nano‐crystal with hexagonal wurtzite structure. The seize of ZnO was estimated in the range of 10–20 nm. Both of the ZnS and ZnO nano‐crystal films exhibited high photocatalytic activities for the photodegradation of Methylene blue and Rhodamine B. It was also found that ZnO porous films are better than ZnS/Carbon nanofiber mats. In addition, photocatalysis of a real wastewater sample from a printing and dyeing company was conducted. The ZnO porous films exhibited excellent performance to treat the real samples. Moreover, the porous ZnO nano‐crystal photocatalyst could easily be recycled without notable loss of catalysis ability.     

Photocatalytic activities of poly(methyl methacrylate)/titanium dioxide nanofiber mat

This study aimed to evaluate the photocatalytic activities of poly(methyl methacrylate) (PMMA)/titanium dioxide (TiO₂) nanofiber mat. TiO₂ nanoparticles in crystal phase were first prepared by sol-gel process and then PMMA/TiO₂ nanofiber mat was prepared through electrospinning. The composite (PMMA/TiO₂) nanofiber mat was compared with that of pure PMMA nanofiber mat through performing FTIR and UV-Vis spectroscopy, scanning electron microscopy, thermogravimetric analysis, weight loss and water contact angle measurements. The photocatalytic activity of PMMA/TiO₂ nanofiber mat was evaluated by investigating both the photocatalytic decomposition of a model dye, methylene blue, and photocatalytic degradation of the composite nanofiber mat in the ambient air under ultraviolet light irradiation.     

Fabrication and characterization of SiO2/PVDF composite nanofiber‐coated PP nonwoven separators for lithium‐ion batteries

SiO₂/polyvinylidene fluoride (PVDF) composite nanofiber‐coated polypropylene (PP) nonwoven membranes were prepared by electrospinning of SiO₂/PVDF dispersions onto both sides of PP nonwovens. The goal of this study was to combine the good mechanical strength of PP nonwoven with the excellent electrochemical properties of SiO₂/PVDF composite nanofibers to obtain a new high‐performance separator. It was found that the addition of SiO₂ nanoparticles played an important role in improving the overall performance of these nanofiber‐coated nonwoven membranes. Among the membranes with various SiO₂ contents, 15% SiO₂/PVDF composite nanofiber‐coated PP nonwoven membranes provided the highest ionic conductivity of 2.6 × 10^?3 S cm^?1 after being immersed in a liquid electrolyte, 1 mol L^?1 lithium hexafluorophosphate in ethylene carbonate, dimethyl carbonate and diethyl carbonate. Compared with pure PVDF nanofiber‐coated PP nonwoven membranes, SiO₂/PVDF composite fiber‐coated PP nonwoven membranes had greater liquid electrolyte uptake, higher electrochemical oxidation limit, and lower interfacial resistance with lithium. SiO₂/PVDF composite fiber‐coated PP nonwoven membrane separators were assembled into lithium/lithium iron phosphate cells and demonstrated high cell capacities and good cycling performance at room temperature. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 1719–1726     

Fabrication of hollow SiO2 and Au (core)–SiO2 (shell) nanostructures of different shapes by CdS template dissolution

Core–shell silica (SiO₂) coated CdS nanorods (NR) and nanospheres (NS) were prepared (SiO₂@CdS) by deposition of a Si–O–Si amorphous layer over the CdS surface through the hydrolysis of 3-mercaptopropyltrimethoxysilane and tetraethylorthosilicate. Nanoporous SiO₂ matrix (NPSM), hollow SiO₂ nanotubes (HSNT) and nanospheres (HSNS) useful for efficient adsorption and catalytic processes were prepared by chemical dissolution of CdS–NS (size: 9–10 nm) and CdS–NR (length: 116–128 nm and width: 6–11 nm) template from SiO₂@CdS with 2 M HNO₃. These SiO₂ nanostructures were characterized by optical absorption, TEM, EDX, SAED and BET surface area analysis. TEM images revealed the fabrication of slightly distorted HSNS (size: 9–12 nm) and closed HSNT (length: 30–45 nm and diameter: 9–14 nm) of shorter dimensions than the CdS–NR template used. The BET surface area (112–134 m² g^?1) of NPSM and HSNS is found to be larger than the surface area (29–51 m² g^?1) of SiO₂@CdS composites indicating hollow SiO₂ morphology. Silica coated Au (SiO₂@Au) composites formed by CdS dissolution from Au (2 wt%) deposited CdS–NR core-encapsulated into SiO₂ shell (SiO₂@Au–CdS–NR) exhibited a surface plasmon band at 550 nm and displayed high catalytic activity for 4-nitrophenol reduction by Au nanoparticle.     

TiO2@CdS core–shell nanorods films: Fabrication and dramatically enhanced photoelectrochemical properties

In this paper, we prepared TiO₂@CdS core–shell nanorods films electrodes using a simple and low-cost chemical bath deposition method. The core–shell nanorods films electrodes were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and UV–vis spectrometry techniques. After applying these TiO₂@CdS core–shell nanorods electrodes in photovoltaic cells, we found that the photocurrent was dramatically enhanced, comparing with those of bare TiO₂ nanorods and CdS films electrodes. Moreover, TiO₂@CdS core–shell nanorods film electrode showed better cell performance than CdS nanoparticles deposited TiO₂ nanoparticles (P25) film electrode. A photocurrent of 1.31 mA/cm², a fill factor of 0.43, an open circuit photovoltage of 0.44 V, and a conversion efficiency of 0.8% were obtained under an illumination of 32 mW/cm², when the CdS nanoparticles deposited on TiO₂ nanorods film for about 20 min. The maximum quantum efficiency of 5.0% was obtained at an incident wavelength of 500 nm. We believe that TiO₂@CdS core–shell heterostructured nanorods are excellent candidates for studying some fundamental aspects on charge separation and transfer in the fields of photovoltaic cells and photocatalysis.     

Preparation and photocatalytic properties of silica-supported fine CdS powders

Summary Silica-supported cadmium sulfide, highly active in hydrogen photogeneration from water-methanol-KOH solution, was prepared by sulfidation of Cd²⁺-impregnated SiO₂. The samples consisted of colloidal-size hexagonal crystallites of CdS on amorphous SiO₂. A blue shift of a light absorption edge was observed for the samples with lower CdS content.

---

Herstellung und photokatalytische Aktivität von feinen CdS-Pulvern auf SiO₂

Zusammenfassung Es wurde Cadmiumsulfid auf Kieselgel durch Sulfidierung von Cd²⁺-imprägniertem SiO₂ hergestellt, das eine außerordentliche Aktivität bei der Wasserstoff-Photogenerierung aus Wasser-Methanol-KOH-Lösungen zeigte. Der Katalysator bestand aus hexagonalen CdS-Kristalliten von kolloidalen Ausmaßen auf amorphem SiO₂. An Proben mit geringerem CdS-Gehalt wurde eine Blauverschiebung der Lichtabsorption an der Absorptionskante beobachtet.

     

Room temperature synthesis of CdS nanoparticle-decorated TiO2 nanotube arrays by electrodeposition with improved visible-light photoelectrochemical properties

Controllable CdS nanoparticles (NPs) decorated on TiO₂ nanotube arrays (NTAs) were prepared via electrodeposition in DMSO solution at room temperature, aiming to improve the photoelectrochemical properties of TiO₂ NTA electrode in visible-light region. By tuning the concentrations of sulfur and Cd^2 + as well as the deposition time, CdS NPs with different sizes can be controllably synthesized at room temperature. Excellent photocurrent response and incident photo to current conversion efficiency were achieved with smaller CdS NPs with optimal reactant concentrations and deposition time, which can be attributed to highly efficient charge separation and high dispersion of CdS NPs on both inner and outer surfaces of TiO₂ nanotubes.     

An Electrochemical Aptasensor for Detection of Thrombin based on Target Protein‐induced Strand Displacement

A sensitive electrochemical aptasensor for detection of thrombin based on target protein‐induced strand displacement is presented. For this proposed aptasensor, dsDNA which was prepared by the hybridization reaction of the immobilized probe ssDNA (IP) containing thiol group and thrombin aptamer base sequence was initially immobilized on the Au electrode by self‐assembling via Au? S bind, and a single DNA labeled with CdS nanoparticles (DP‐CdS) was used as a detection probe. When the so prepared dsDNA modified Au electrode was immersed into a solution containing target protein and DP‐CdS, the aptamer in the dsDNA preferred to form G‐quarter structure with the present target protein resulting that the dsDNA sequence released one single strand and returned to IP strand which consequently hybridized with DP‐CdS. After dissolving the captured CdS particles from the electrode, a mercury‐film electrode was used for electrochemical detection of these Cd²⁺ ions which offered sensitive electrochemical signal transduction. The peak current of Cd²⁺ ions had a good linear relationship with the thrombin concentration in the range of 2.3×10^?9–2.3×10^?12 mol/L and the detection limit was 4.3×10^?13 mol/L of thrombin. The detection was also specific for thrombin without being affected by the coexistence of other proteins, such as BSA and lysozyme.     

A facile method to prepare CdS/polystyrene composite particles

Nano-CdS/polystyrene composite particles were prepared via surfactant-free emulsion polymerization. 2-(Dimethylamino)ethyl methacrylate (DMEMA) was used as auxiliary monomer which co-polymerized with styrene (St) and provided the location for coordinating with Cd²⁺. By the coordination of Cd²⁺ ions to DMEMA, mono-disperse polystyrene with the Cd²⁺ ions on the particles surface were prepared successfully. With the release of S²⁻ ions from the thioacetamide (TAA), cadmium sulfide (CdS) was formed. Nano-CdS/PS composite particles could be synthesized via this facile method. The order of materials addition and the amount of initiator both are playing important roles to the final morphologies of the composite particles. In the method proposed in this study, no surfactant was used, and the stable emulsion was successfully obtained. UV–vis absorption and fluorescence measurement indicated the quantum dot effect in the resulted nano-CdS/PS composite particles. The possible composite particle formation mechanism was presented.     

UV-protection and photocatalytic properties of electrospun polyacrylonitrile nanofibrous mats coated with TiO<Subscript>2</Subscript> nanofilm via sol–gel

UV radiation causes serious damage to skin, and a protective system capable of absorbing or reflecting UV radiation is required to protect skin. This paper describes the UV protection and photocatalytic properties of TiO₂ nanofilm coated electrospun polyacrylonitrile (PAN) nanofibrous mats with various nanofiber diameter and area density. The mats were coated by sol–gel process. The results of this research showed that sol–gel is capable of coating porous nanofibrous mats with a weight increase as low as 0.8%. The TiO₂ nanofilm coated on the nanofibrous mats has a considerable effect on its UV protection. The UV protection factor (UPF) of the mats increases with decreasing nanofiber diameter. In fact decreasing the diameter of nanofibers of the TiO₂ nanofilm coated PAN nanofibrous mats increases their photocatalytic activity. Moreover, this research showed that TiO₂ nanofilm produced through sol–gel process on the PAN nanofibers has a crystalline structure. The UPF of the nanofibrous mat coated with a TiO₂ nanofilm via sol–gel process can be classified as excellent.     

Synthesis of CuInS2@CdS Core‐Shell Nanocrystals

CuInS₂@CdS core‐shell nanocrystals were prepared in a wet chemical process. Transmission electron microscope (TEM), x‐ray energy dispersive spectroscopy (EDAX), x‐ray diffraction (XRD), absorption, and photoluminescence (PL) spectra were used to confirm the formation of the CuInS₂@CdS core‐shell structure. The growth of CdS shell not only increased the PL intensity, but also restrained the transformation of CuInS₂ from nanoparticles to nanorods after annealing, which was attributed to an effective chemical passivation of the CuInS₂ core by the CdS shell.     

Fabrication of SiO2-TiO2/PVDF Copolymer Nanofiber Composite by Electrospinning Process

Multifunctional nanocomposite material is a key material component for the future. It is indicated by many studies have been conducted by researchers in university, research institute and industries. Silicon dioxide (SiO₂), titanium dioxide (TiO₂) and polyvinilidene fluoride copolymer are very important material due to their excellent properties. In this research paper, we have successfully synthesized SiO₂-TiO₂/PVDF copolymer nanofiber composite by electrospinning process. SiO₂-TiO₂/PVDF copolymer nanofiber composite has smooth surface morphology without bead on nanofiber string after confirming by scanning electron microscopy (SEM). Nanofiber composite has average diameter of 350 nm. FTIR and XRD structure analysis of nanofiber composite show us that PVDF copolymer in nanocomposite has a mixed α and β phase crystal structure. Crystal phase of TiO₂ in nanofiber composite was in rutile form.     

Electrospinning and characterization of poly(vinyl alcohol)/chitosan oligosaccharide/clay nanocomposite nanofibers in aqueous solutions

Submicron fibers of the composite of poly(vinyl alcohol) (PVA), chitosan oligosaccharide [COS, (1→4)2-amino-2-deoxy-β-d-glucose], and montmorillonite clay (MMT) were prepared using electrospinning method with aqueous solutions. Scanning electron microscopy, transmission electron microscopy (TEM), X-ray diffraction (XRD), thermal gravimetric analyzer, and tensile strength testing machine (Zwick) were utilized to characterize the PVA/COS/MMT nanofiber mats morphology and properties. The PVA/COS ratio and MMT concentration play important roles in nanofiber mat properties. XRD and TEM data demonstrated that exfoliated MMT layers were well-distributed within nanofiber. It was also found that the mechanical property and thermal stability were increased with COS and MMT contents.     

Influence of the surface chemistry on the structural and mechanical properties of silica‐polymer composites

Poly(vinyl alcohol) (PVA) composite films filled with nanometric, monodisperse, and spherical silica particles were prepared by the mixing of an aqueous PVA solution and SiO₂ colloidal suspension and the evaporation of the solvent. Adjusting the solution pH to 5 and 9 controlled the PVA‐SiO₂ interaction. Adsorption isotherms showed a higher PVA/surface affinity at a lower pH. This interaction influenced the composite structure and the particle distribution within the polymer matrix, which was investigated by small‐angle neutron scattering, electron microscopy, and swelling measurements. Most of the mechanical properties could be related to the composite structure, that is, the distribution of clusters within the polymer matrix. The progressive creation of a cluster network within the polymeric matrix as the silica volume fraction increased reduced the extensibility or swelling capacity of the composite. The effect was more acute at a higher pH, at which the surface interaction with PVA was weaker and promoted the interconnection between clusters. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 3127–3138, 2003     

CdS/TiO2 composite films for methylene blue photodecomposition under visible light irradiation and non-photocorrosion of cadmium sulfide

Cadmium sulfide/titanium dioxide (CdS/TiO₂) composite films were grown on glass by the chemical bath deposition (DBQ) and sol-gel/dip coating methods, respectively, in order to increase the photocatalytic activity of TiO₂ in photodegradation processes. The influence of the CdS deposition time on the morphology, optical absorption, and phononic modes of the composites were examined. Scanning electron microscopy (SEM) images showed clearly the CdS deposit on the TiO₂ surface. The absorbance spectra indicated that the absorption of composites depends on the CdS deposition time and the absorption edges are shifted to the visible range. Micro Raman spectra exhibited the phonons associated with the TiO₂ anatase and the longitudinal optic (LO) phonon of CdS whose intensity increases with the CdS deposition time. Photodegradation of methylene blue (MB) under visible light irradiation was observed in all films and the results were compared with those obtained with TiO₂ films. The decomposition is higher for the composite with the CdS deposition time of 15 min. This optimal deposition time allows maximal enhancement of the charge carriers transfer to TiO₂ involved in the photocatalysis. No signal associated with cadmium was detected by the atomic absorption spectroscopy (AAS), which means that the CdS photocorrosion does not occur since trap centers such as OH-Cd-S and Cl^?, which trap holes and inhibit the photocorrosion, are produced during the growth process.     

Controlled Synthesis of Hollow PbS‐TiO2 Hybrid Structures through an Ion Adsorption–Heating Process and their Photocatalytic Activity

Hollow hybrid nanostructures have received significant attention because of their unique structural features. This study reports a facile ion adsorption–heating method to fabricate hollow PbS‐TiO₂ hybrid particles. In this method, the TiO₂ spheres used as a substrate material to grow PbS are aggregates of many small amorphous TiO₂ particles, and each small particle is covered with thioglycolic acid ligands through Ti⁴⁺–carboxyl coordination. When Pb²⁺ ions are added to a colloidal solution of these TiO₂ spheres, these ions are adsorbed by sulfhydryl (‐SH) groups to form metal thiolates, and the C−S bond is dissociated by heating to release S²⁻. The S²⁻ ions react with Pb²⁺ ions to form PbS without additive sulfur sources. Additionally, the amorphous TiO₂ spheres are transformed into the anatase phase during the heating process. As a result, the crystallization of TiO₂ spheres along with the formation of PbS is simultaneously carried out by heating. During the heating process, owing to the Kirkendall effect of S²⁻ diffusion and the Ostwald ripening effect of the crystallization of amorphous TiO₂ spheres, PbS‐TiO₂ hollow hybrid structures can be obtained. The XRD and XPS characterizations proved the formation of anatase TiO₂ and PbS. The TEM characterization confirmed the formation of hollow structures in the PbS‐TiO₂ hybrid sample. The photocatalytic activity of the hollow PbS‐TiO₂ hybrid spheres have been investigated for the degradation of Cr⁶⁺ under visible light. The results show that hollow PbS‐TiO₂ hybrid spheres exhibited the highest photocatalytic activity, in which almost all the Cr⁶⁺ was degraded after 140 min.     

Enhanced Visible‐Light‐Induced Photoelectrocatalytic Degradation of Methyl Orange by CdS Sensitized TiO2 Nanotube Arrays Electrode

In this work, CdS sensitized TiO₂ nanotube arrays (CdS/TiO₂NTs) electrode was synthesized with the CdS deposition on the highly ordered titanium dioxide nanotube arrays (TiO₂NTs) by sequential chemical bath deposition method (S‐CBD). The as‐prepared CdS/TiO₂NTs was characterized by field‐emission scanning electron microscopy (FE‐SEM) and X‐ray diffraction (XRD). The results indicated that the CdS nanoparticles were effectively deposited on the surface of TiO₂NTs. The amperometric I‐t curve on the CdS/TiO₂NTs electrode was also presented. It was found that the photocurrent density was enhanced significantly from 0.5 to 1.85 mA/cm² upon illumination with applied potential of 0.5 V at the central wavelength of 253.7 nm. The photoelectrocatalytic (PEC) activity of the CdS/TiO₂NTs electrode was investigated by degradation of methyl orange (MO) in aqueous solution. Compared with TiO₂NTs electrode, the degradation efficiencies of CdS/TiO₂NTs electrode increased from 78% to 99.2% under UV light in 2 h, and from 14% to 99.2% under visible light in 3 h, which was caused by effective separation of the electrons and holes due to the effect of CdS, hence inhibiting the recombination of electron/hole pairs of TiO₂NTs.     

Synthesis of TiO2–SiO2 aerogel via ambient pressure drying: effects of sol pre-modification on the microstructure and pore characteristics

TiO₂–SiO₂ composite aerogels were prepared via ambient pressure drying by sol–gel and surface modification for both the sol and gel samples. The organosilane reagents of decamethyltetrasiloxane (DMTSO)/trimethylchlorosilane (TMCS) and hexamethyldisiloxane (HMDSO)/TMCS were introduced into the TiO₂–SiO₂ composite sol for pre-modification respectively, and subsequently the TMCS/hexane solution was used for surface modification of the obtained TiO₂–SiO₂ composite gel. The effects of sol pre-modification on the microstructure and pore characteristics of TiO₂–SiO₂ composite aerogels were investigated. The results indicate that HMDSO/TMCS coupling reagents is more appropriate for the pre-modification of TiO₂–SiO₂ composite sol than the DMTSO/TMCS reagents. The best volume ratio of HMDSO/TMCS/composite sol for preparing mesoporous TiO₂–SiO₂ composite aerogels is in the range of 1:0.33:10–1:1.0:10, with which the specific surface area and pore volume of the obtained TiO₂–SiO₂ composite aerogels are 492–645 m²/g and 2.63–2.85 m³/g, respectively. The results of adsorption and photocatalytic degradation of rhodamine B show that the as-prepared TiO₂–SiO₂ composite aerogels have higher adsorption/photocatalysis. Particularly, the as-prepared TiO₂–SiO₂ composite aerogels with HMDSO/TMCS showed prominent adsorption capability with the adsorption rate attaining to 89.4 % within 60 min.     

Control of particle size distribution of CdS quantum dots in gel matrix

A novel sol-gel process has been developed to prepare nano-sized CdS quantum dots to improve the nonlinear optical properties. A bifunctional ligand, 3-aminopropyl triethoxysilane H₂N(CH₂)₃Si(OC₂H₅)₃, was used to disperse the Cd²⁺ ions in the gel solution. The CdO and CdS particles were observed by transmission electron microscope (TEM). The size of CdS microcrystallites with concentrations up to 13 wt.% in SiO₂ gel matrix was found to be in the range of 2–4 nm with a very sharp size distribution. A well-defined absorption edge was observed in the absorption spectrum.