三维边界元法高阶元几乎奇异积分半解析法

分析了三维边界元法高阶曲面单元几何特征,定义接近度来表征源点与积分单元的接近程度.利用源点在积分单元上的垂足点建立局部极坐标系,构造与几乎奇异积分核函数具有相同奇异性的近似函数.从奇异积分核函数中扣除其近似函数,分离出积分核中主导的奇异函数部分,将奇异积分分解为规则核函数和奇异核函数两项积分.规则核函数积分应用常规Gauss数值积分计算,奇异核函数积分在局部极坐标系ρθ下分离积分变量ρ和θ,对ρ积分建立解析计算列式,对θ积分应用常规Gauss数值积分计算,从而对三维位势问题高阶边界单元几乎强奇异和几乎超奇异积分建立一种新的半解析算法.给出了若干温度场算例,采用边界元法高阶单元几乎奇异积分半解析法计算了近边界内点位势和位势梯度,并与线性单元正则化算法计算结果对比,结果证明提出的半解析法计算几乎奇异面积分和薄壁结构更加高效.      

A NEW SEMI-ANALYTIC ALGORITHM OF NEARLY SINGULAR INTEGRALS IN HIGH ORDER BOUNDARY ELEMENT ANALYSIS OF 3D POTENTIAL

分析了三维边界元法高阶曲面单元几何特征,定义接近度来表征源点与积分单元的接近程度.利用源点在积分单元上的垂足点建立局部极坐标系,构造与几乎奇异积分核函数具有相同奇异性的近似函数.从奇异积分核函数中扣除其近似函数,分离出积分核中主导的奇异函数部分,将奇异积分分解为规则核函数和奇异核函数两项积分.规则核函数积分应用常规Gauss数值积分计算,奇异核函数积分在局部极坐标系ρθ下分离积分变量ρ和θ,对ρ积分建立解析计算列式,对θ积分应用常规Gauss数值积分计算,从而对三维位势问题高阶边界单元几乎强奇异和几乎超奇异积分建立一种新的半解析算法.给出了若干温度场算例,采用边界元法高阶单元几乎奇异积分半解析法计算了近边界内点位势和位势梯度,并与线性单元正则化算法计算结果对比,结果证明提出的半解析法计算几乎奇异面积分和薄壁结构更加高效.     

空间狭缝流道粘弹流体流动的有限柱解法

空间狭缝流道在粘弹性聚合物成型加工中较为常见.针对流道特点,仅仅在流动平面内对速度采用形函数插值,在厚度方向采用傅里叶级数逼近流动分布函数,推导弱解形式的单元方程后,通过坐标变换得到整体坐标下的有限元方程系数矩阵,再集合成整体系数矩阵,从而建立了空间狭缝流动的有限柱解法.分别采用有限柱法和三维有限元对积分型K-BKZ本构模型粘弹流体在L型流道的流动进行求解,发现有限柱法与三维有限元的结果在整体上十分吻合.出口处流量分布的误差小于2%,流量的结果仅仅在流道收敛处略有差异,但差异仅局限于很小的区域.相比与三维有限元方法,有限柱法的单元数、计算时间和对内存需求大大减少.研究表明有限柱法是一种分析狭缝流动的简便有效的方法.     

弱连续条件下的九参三角形板元

首先对薄板弯曲平衡方程的弱形式进行了推导,导出保证单元收敛的弱协调条件,即三角形顶点函数值连续和三边的法向导数积分连续这两个条件;对比拟协调元、广义协调元和双参数法中所使用的3个积分连续条件,本条件更弱;再对这3个积分协调条件的构成方法进行了总结和分析,现有采用积分连续条件构造的有限元大都采用了这些构成方法.采用弱协调条件构造有限元,比原来的构造范围更广,井以此构造出几种单元作为算例.采用这种构成法还可构造多种单元,它们都具有采用最小势能原理法构成有限元的简便的优点,并在任意网格下收敛到真解.     

三维问题边界元法中几乎奇异积分的正则化算法

当源点靠近边界单元时,边界积分方程通常存在几乎奇异积分的计算难题.基于三角形单元,将源点到单元的距离与单元特征长度比值定义为接近度,用于度量边界单元中积分奇异性的程度.将单元上的面积分在局部的极坐标系ρθ下表示,利用一些初等函数的积分公式,获得对变量ρ作单层积分的解析表达式.几乎强奇异和超奇异面积分被转化为沿单元围道上一系列线积分,而Gauss数值积分能够有效计算这些线积分.应用该算法分析三维弹性薄壁结构获得了成功.     

薄板弯曲问题的P型杂交解析有限元方法

本文采用两套变量构造有限元试函数空间，在单元内部要求试函数精确满足平衡微分方程，在单元边界上对位移和转角分别用Ｐｅａｎｏ升阶函数插值，然后利用广义变分原理建立了一种薄板弯曲问题的Ｐ型杂交解析有限方法，与常规有限元法相比，该方法不心进行过细的网格剖分，通过增加单元插值多项式的阶数Ｐ来提高精度，此外，该方法还具有积分计算只需在单元边界上进行、单元钢度矩阵和载荷向量具有嵌入结构、协调程度可以自动控制等优     

用边缘荷载格林函数方法计算含裂纹Reissner型有限板的弯曲

本文在文献[1]所得到的受边缘荷载格林函数基本解方法基础上,利用叠加原理,通过边界积分方程的方法,分析了含裂纹Reissner型板的弯曲断裂问题。计算表明方法正确,便于应用。     

基于三角网格的四阶Hermite型对流守恒格式

提出一种基于三角网格的求解双曲对流方程的高阶守恒型格式.该格式首先在每个三角单元上重构二元三次Hermite插值多项式,以当前时刻单元节点处解的函数值、一阶空间导数值和该单元的积分平均值为插值条件.然后,利用Semi-Lagrange方法得到单元节点处的下一时刻解的函数值及导数值,而下一时刻的解的单元积分平均值由有限体积方法得到.本文所提出的格式将原始CIP方法从结构网格推广到非结构网格上,使得CIP方法能灵活地用于处理复杂边界问题.该格式为显式紧致格式,计算简单且易于实现.数值实验表明,该格式对于光滑解问题能达到四阶空间精度,而对于非光滑解问题能准确地捕捉激波的位置,改进了原始CIP格式的不守恒性.     

A NEW SEMI-ANALYTIC ALGORITHM OF NEARLY SINGULAR INTEGRALS IN HIGH ORDER BOUNDARY ELEMENT ANALYSIS OF 2D ELASTICITY

针对边界元法中高阶单元中几乎奇异积分计算难题,解剖了二维边界元法高阶单元的几何特征,定义源点相对高阶单元的接近度。将高阶单元上奇异积分核函数用近似奇异函数逼近,从而分离出积分核中主导的奇异函数部分,其奇异积分核分解为规则核函 数和奇异核函数两项积分之和。规则核函数用常规高斯数值积分,再对奇异核函数积分导出解析公式,从而建立了一种新的半解析法,用于高阶边界单元上几乎强奇异和超奇异积分计算。给出3个算例,采用边界元法高阶单元的半解析法计算了弹性力学薄体结构和近边界点位移/应力,并与线性边界元正则化算法结果作了比较,结果表明提出的二次元的半解析算法更加有效。特别是分析薄体结构,采用正则化算法的线性边界元分析比有限元有显著优势,而用提出的二次边界元半解析算法分析比其线性元的有效接近度又减小了4个量级。     

二元复合材料板的自由振动: 半解析法

二元复合材料板是超材料板结构中常见的单元之一. 针对由材料参数相差两个量级的基体和嵌入体组成的二元复合材料板, 提出结构自由振动的半解析模型, 并对其振动特性进行了研究. 基于区域分解法和二元材料的分布, 将二维平板分解成两个子区域. 通过在振型函数中附加区域试函数, 来描述复合材料板面内刚度突变引起局部位移和转角的非光滑性. 基于二元复合材料板的基本边界条件和两子区连接处的变形协调条件, 构造了新的振型函数. 基于经典薄板理论, 利用带特殊试函数的里兹法, 求得不同几何构型下二元复合材料板的固有频率和振型, 并研究了嵌入体的尺寸和位置对结构振动特性的影响规律. 通过收敛分析并与有限元仿真结果对比, 验证了本文方法的准确性. 研究结果表明: 传统的全局试函数在分析具有振动局部化的模态时会得到不准确的结果, 而附加区域试函数可以显著提高里兹法的收敛速度以及结果的准确性; 嵌入体位置对低阶固有频率的作用不明显, 却能显著改变低阶振型节线的分布和振动局部化发生的区域.      

The improvement of numerical modeling in the solution of incompressible viscous flow problems using finite element method based on spherical Hankel shape functions

In this paper, the finite element method with new spherical Hankel shape functions is developed for simulating 2‐dimensional incompressible viscous fluid problems. In order to approximate the hydrodynamic variables, the finite element method based on new shape functions is reformulated. The governing equations are the Navier‐Stokes equations solved by the finite element method with the classic Lagrange and spherical Hankel shape functions. The new shape functions are derived using the first and second kinds of Bessel functions. In addition, these functions have properties such as piecewise continuity. For the enrichment of Hankel radial basis functions, polynomial terms are added to the functional expansion that only employs spherical Hankel radial basis functions in the approximation. In addition, the participation of spherical Bessel function fields has enhanced the robustness and efficiency of the interpolation. To demonstrate the efficiency and accuracy of these shape functions, 4 benchmark tests in fluid mechanics are considered. Then, the present model results are compared with the classic finite element results and available analytical and numerical solutions. The results show that the proposed method, even with less number of elements, is more accurate than the classic finite element method.     

Finite Element Analysis of Elasto-plastic Plate Bending Problems using Transition Rectangular Plate Elements

In this work, the finite element analysis of the elasto-plastic plate bending problems is carried out using transition rectangular plate elements. The shape functions of the transition plate elements are derived based on a practical rule. The transition plate elements are all quadrilateral and can be used to obtain efficient finite element models using minimum number of elements. The mesh convergence rates of the models including the transition elements are compared with the regular element models. To verify the developed elements, simple tests are demonstrated and various elasto-plastic problems are solved. Their results are compared with ANSYS results.The English text was polished by Keren Wang.     

P-version hybrid analytical finite element method for plate bending problems

Two sets of trial functions with different variables are constructed for the admissible space of the finite element analysis. The trial functions satisfy the equilibrium differential equation inside elements, while the deflections and rotations on the edges of the elements are approximated by the Peano hierarchical interpolation functions. Then, a generalized variational principle is applied to set up the p-version hybrid analytical finite element method for plate bending problems. The accuracy of finite element computation can be improved by increasing the order of the interpolation polynomials with fixed mesh. In the finite element formulation, to obtain the stiffness matrices and the load vectors, it is only necessary to perform quadrature over the edges of the elements. These matrices and vectors possess an embedding structure. The conformability between the elements can be controlled automatically.This work is supported by the Natural Science Foundation of China and the Aeronautical Science Foundation of China.     

节点梯度光滑有限元配点法

配点法构造简单、计算高效,但需要用到数值离散形函数的高阶梯度,而传统有限元形函数的梯度在单元边界处通常仅具有C0连续性,因此无法直接用于配点法分析.本文通过引入有限元形函数的光滑梯度,提出了节点梯度光滑有限元配点法.首先基于广义梯度光滑方法,定义了有限元形函数在节点处的一阶光滑梯度值,然后以有限元形函数为核函数构造了有...     

Determination of stress intensity factors by the finite element discretized symplectic method

When rewriting the governing equations in Hamiltonian form, analytical solutions in the form of symplectic series can be obtained by the method of separation of variable satisfying the crack face conditions. In theory, there exists sufficient number of coefficients of the symplectic series to satisfy any outer boundary conditions. In practice, the matrix relating the coefficients to the outer boundary conditions is ill-conditioned unless the boundary is very simple, e.g., circular. In this paper, a new two-level finite element method using the symplectic series as global functions while using the conventional finite element shape functions as local functions is developed. With the available classical finite elements and symplectic series, the main unknowns are no longer the nodal displacements but are the coefficients of the symplectic series. Since the first few coefficients are the stress intensity factors, post-processing is not required. A number of numerical examples as well as convergence studies are given.     

P-FEMOL ANALYSIS OF PLATE BENDING PROBLEMS

In this paper,the p-version of the finite element method of lines(FEMOL) for the analysis of the Mindlin-Reissner plate bending problems is presentedand a class of p-FEMOL elements with polynomial degrees as high as nine isdeveloped.Numerical examples given in this paper show tremendous performance ofthe present method;namely,rapid convergence rate,high accuracy for bothdisplacements and stress resultants,removal of shear-locking trouble,capability ofdealing with difficult problems such as the boundary layer behavior near a free edgeand stress concentration around a hole.     

差分格式收敛性研究的一种新方法

提出了一种对差分格式收敛性进行研究的新方法．应用U变换法和有限差分法，分析了均质简支梁的静力问题，求出了在均布荷载作用下梁的挠度和弯矩的精确解析表达式，并研究其收敛性，得到了收敛率系数的精确值．     

A mixed‐interpolation finite element method for incompressible thermal flows of electrically conducting fluids

A new mixed‐interpolation finite element method is presented for the two‐dimensional numerical simulation of incompressible magnetohydrodynamic (MHD) flows which involve convective heat transfer. The proposed method applies the nodal shape functions, which are locally defined in nine‐node elements, for the discretization of the Navier–Stokes and energy equations, and the vector shape functions, which are locally defined in four‐node elements, for the discretization of the electromagnetic field equations. The use of the vector shape functions allows the solenoidal condition on the magnetic field to be automatically satisfied in each four‐node element. In addition, efficient approximation procedures for the calculation of the integrals in the discretized equations are adopted to achieve high‐speed computation. With the use of the proposed numerical scheme, MHD channel flow and MHD natural convection under a constant applied magnetic field are simulated at different Hartmann numbers. The accuracy and robustness of the method are verified through these numerical tests in which both undistorted and distorted meshes are employed for comparison of numerical solutions. Furthermore, it is shown that the calculation speed for the proposed scheme is much higher compared with that for a conventional numerical integration scheme under the condition of almost the same memory consumption. Copyright © 2016 John Wiley & Sons, Ltd.