共查询到19条相似文献,搜索用时 78 毫秒
1.
2.
3.
随着太赫兹技术的发展,高频率、大功率的太赫兹辐射源一直是国内外研究的热点。再生反馈振荡器作为一种新型太赫兹源器件,具有可行性高、功率大的优点。基于0.8 THz太赫兹波成像系统的需求,采用折叠波导慢波结构,对再生反馈振荡器进行设计与研究。首先对0.8 THz折叠波导慢波结构进行设计并使用CST微波工作室中的本征模求解器进行参数优化,再通过CST粒子工作室中的PIC仿真模块对整管进行热特性仿真,验证了方案的可行性,仿真结果显示,最终可产生60 mW的稳定输出信号。 相似文献
4.
从光纤陀螺的固有特性入手,结合舰载光电系统实现瞄准线稳定的需求,对基于光纤陀螺的瞄准线稳定控制系统进行了分析研究。针对船摇类扰动的作用机理,提出了基于速率光纤陀螺的舰载光电系统零值自跟踪的瞄准线稳定方法。 相似文献
5.
6.
针对光电稳定平台常用的压电陀螺随机游走噪声大的缺点,提出采用基于线性加速度计的卡尔曼滤波技术对其进行信号滤波。利用卡尔曼滤波理论,建立了压电陀螺角速率状态观测方程,采用线性加速度计测量平台惯性角加速度,由此对陀螺信号进行了滤波。实验结果表明:采用线性加速度计能够在不影响陀螺带宽的前提下将压电陀螺的随机游走噪声水平由原有的0.005(°).s-1/槡Hz降低到0.001 25(°).s-1/槡Hz,提高了光电平台的稳定精度。 相似文献
7.
针对光电跟踪系统中实时提取运动目标脱靶量的应用需求,设计了一种基于灰度直方图的Mean-shift 图像跟踪算法,对算法中目标模型与候选模型的建立进行了改进,抑制了背景像素对目标跟踪产生的影响。算法在系统上位机Visual C+ + 6.0平台上实现,当光电跟踪系统捕获到运动目标后,利用Mean-shift图像跟踪算法跟踪运动目标,并实时将运动目标脱靶量作为伺服控制系统的输入信号,驱动跟踪器跟踪目标。实验结果表明:设计的算法可以实时、准确、有效地跟踪运动目标,使稳定后的脱靶量换算得到的角偏差量控制在30"之内。 相似文献
8.
9.
10.
11.
光电跟踪系统计算机辅助控制实现 总被引:1,自引:1,他引:0
建立了基于数值微分的目标运动状态滤波预测模型,用s-函数实现了卡尔曼滤波预测算法。利用目标位置拟合方法给出角位置信息,并以此为观测信息通过卡尔曼滤波预测出当前角位置和角速度信息,将其引入跟踪控制系统中以克服脱靶量滞后问题,同时也实现了系统的等效复合控制。仿真结果表明,基于数值微分的模型适用于角度跟踪,滤波预测具有较好的鲁棒性。通过对两个不同等效正弦输入的验证,可知角位置合成精度对共轴跟踪影响较大,在脱靶量和跟踪架角位置采样匹配对应时,跟踪仿真精度较高,而对等效复合控制跟踪误差影响较小,输入信号角频率增大时误差增大。 相似文献
12.
针对传统的以红外反射式传感器为主的循迹小车存在受强光干扰不灵敏、循迹线的铺设色差及线宽要求较高的缺点,提出了以单片机为控制器,LDC1000电感数字转换器和外接线圈作为循迹传感器,结合光电测速电路、驱动电路、LCD显示电路等,实现在跑道标识为一根直径为0.9 mm的细铁丝的平面跑道上稳定运行;具备在运行途中检测跑道上的金属片,实现报警和计数功能;具备实时显示小车运行时间、速度和距离的功能;实验证明,该系统集测量精度高、显示直观及工作性能稳定等优点,采用的非接触、无磁体的感应技术对以导体为循迹标识的小车的设计有一定的指导意义。 相似文献
13.
四旋翼飞行器是一种结构紧凑、飞行方式独特的垂直起降式飞行器,具有欠驱动、强耦合的特点。为实现对飞行器的控制,使之能从起始位置在一定时间内到达设定目标点并稳定悬停,根据其飞行特点建立动力学模型并在此基础上提出了一种双闭环PID控制方法。其中,外环实现飞行器的位置控制,使用目标点与反馈回的实际坐标的偏差作为控制器的输入,内环实现飞行器的姿态控制,其姿态的参考量由外环的输出经逆向求解获得的欧拉角与实际姿态角求得的偏差作为控制器的输入。通过PID算法后输出的姿态控制信号,经过四旋翼飞行器“十”字动力学模型解耦得到4个电机的转速控制值,从而完成定点跟踪任务。提出的双闭环PID控制方法在仿真中获得了验证,为飞行器的进一步研究提供了基础。 相似文献
14.
This paper introduces the finding of a unified Lorenz-like system.By gradually tuning the only parameter d,the reported system belongs to Lorenz-type system in the sense defined by Clikovsky.Meanwhile,this system belongs to Lorenz-type system,Lu-type system,Chen-type system with d less than,equivalent to and greater than 1.5,respectively,according to the classification defined by Yang.However,this system can only generate a succession of Lorenz-like attractors.Some basic dynamical properties of the system are investigated theoretically and numerically.Moreover,the tracking control of the system with exponential convergence rate is studied.Theoretical analysis and computer simulation show that the proposed scheme can allow us to drive the output variable x\ to arbitrary reference signals exponentially,and the guaranteed exponential convergence rate can be estimated accurately. 相似文献
15.
We consider the system consisting of two qubits collectively damped,with the output being unit-efficiency measured and subsequently fedback to control the system state. Our primary goal in this paper is (i) to solve the feedback-modified master equation, (ii) to demonstrate the ability of feedback control based on the solutions, and (iii) to pick out different steady states by choosing different driving strengths and feedback strengths tocounteract the effects of both damping and the measurement back-action on the system. We further investigate some properties of the equilibrium steady state, its distribution probability and entanglement vs. the driving and feedback amplitudes. We find that in our feedback model feedback plays a negative role in producing entanglement. 相似文献
16.
为了保证航空器运行过程中,天线能够实时的对准行航空器,保证通讯的正常,本文设计了一种基于STM32的雷达信号跟踪控制系统。使用STM32F407IG控制芯片作为信号跟踪控制系统的处理器,通过处理来自接收机的方位差电压ΔA信号和俯仰差电压ΔE信号,控制步进电机的转动,实现对天线运动状态的控制,保证天线能够实时对准航空器。STM32F407IG自带的定时器提供了PWM脉冲功能,可以通过给步进电机驱动器发送脉冲命令来实现对电机的运动控制。为了保证运动的可靠性,系统使用了旋转变压器形成闭环控制。 相似文献
17.
针对轮式机器人轨迹跟踪控制系统误差收敛速率低、精度和实时性差的问题,采用反演控制算法并结合李雅普诺夫稳定性分析方法对轮式机器人的轨迹跟踪系统进行了优化设计。建立了轮式机器人轨迹跟踪控制系统的运动学模型,并对该模型进行位置偏差分析;在反演控制算法中引入了分部虚拟控制量,并分析和设计了其他间接受控量,提高了算法运行的效率;采用李雅普诺夫收敛定理对系统的收敛性进行分析,根据分析的结果提出了算法更加简单的控制律。利用Matlab软件的Simulink库对设计的轨迹跟踪控制系统试验研究。结果表明,与基于李雅普诺夫直接法或者迭代学习算法设计的轮式机器人轨迹跟踪控制系统相比较,设计的控制系统具有跟踪精度高、收敛速度快、实时性好的优点。 相似文献
18.
In this paper, a robust trajectory tracking control method with state constraints and uncertain disturbances on the ground of adaptive dynamic programming (ADP) is proposed for nonlinear systems. Firstly, the augmented system consists of the tracking error and the reference trajectory, and the tracking control problems with uncertain disturbances is described as the problem of robust control adjustment. In addition, considering the nominal system of the augmented system, the guaranteed cost tracking control problem is transformed into the optimal control problem by using the discount coefficient in the nominal system. A new safe Hamilton–Jacobi–Bellman (HJB) equation is proposed by combining the cost function with the control barrier function (CBF), so that the behavior of violating the safety regulations for the system states will be punished. In order to solve the new safe HJB equation, a critic neural network (NN) is used to approximate the solution of the safe HJB equation. According to the Lyapunov stability theory, in the case of state constraints and uncertain disturbances, the system states and the parameters of the critic neural network are guaranteed to be uniformly ultimately bounded (UUB). At the end of this paper, the feasibility of the proposed method is verified by a simulation example. 相似文献
19.
The effects of time-delayed feedback control in a single-mode laser
system is investigated. Using the small time delay approximation,
the analytic expression of the stationary probability distribution
function of the laser field is obtained. The mean, normalized
variance and skewness of the steady-state laser intensity are
calculated. It is found that the time-delayed feedback control can
suppress the intensity fluctuation of the laser system. The
numerical simulations are in good agreement with the approximate
analytic results. 相似文献