Solid-phase extraction of plutonium in various oxidation states from simulated groundwater using N-benzoylphenylhydroxylamine

Solid-phase extraction of plutonium in different individual and mixed oxidation states from simulated groundwater (pH 8.5) was studied. The extraction of plutonium species was carried out in a dynamic mode using DIAPAK C16 cartridges modified by N-benzoylphenylhydroxylamine (BPHA). It was shown that the extent of recovery depends on the oxidation state of plutonium. The extraction of Pu(IV) was at the level of 98–99% regardless of the volume and flow-rate of the sample solution. Pu(V) was extracted by 90–95% and 75–80% from 10- and 100-mL aliquots of the samples, respectively, whereas the extraction of Pu(VI) did not exceed 45–50%. An equimolar mixture of Pu(IV), Pu(V), and Pu(VI) was extracted by 74%. The distribution coefficients (K _d) and kinetic exchange capacities (S) of plutonium in various oxidation states were measured. It was found that during the sorption process, Pu(V) was reduced to Pu(IV) by 80–90% after an hour-long contact with the solid phase. Pu(VI) is reduced to Pu(V) by 34% and to Pu(IV) by 55%. In the case of mixed-valent solution of plutonium, only Pu(V) and Pu(IV) were found in the effluents.     

Determination of aqueous plutonium oxidation states by solvent extraction

The reliability of two solvent extraction techniques for the determination of Pu oxidation states in solution was tested with low-ionic-strength solutions and with high-Na and high-Mg brines that contained Pu concentrations sufficient for spectrophotometric analysis. One procedure only differentiates between reduced Pu [Pu(III) and Pu(IV)] and oxidized Pu [Pu(V) and Pu(VI)], whereas the second procedure was designed to differentiate between Pu(IV), Pu(V), and Pu(VI) in solution. Both procedures successfully differentiated between oxidized and reduced Pu in both dilute solutions and brines when tested with samples that contained only the Pu(IV), Pu(V), or Pu(VI) oxidation states. However, when the second solvent extraction procedure, which differentiates between Pu(V) and Pu(VI), was employed for solutions that did not contain a strong oxidant to maintain the Pu(VI) oxidation state, significant quantities of Pu(VI) were reduced to Pu(V) during extraction, indicating that accurate quantification of Pu(V) and Pu(VI) is not possible with this procedure.Work supported by the U. S. Department of Energy under Contract DE-ACO6-76RLO 1830.     

Antimicrobial Properties of Lyophilized Extracts of Olive Fruit,Pomegranate and Orange Peel Extracts against Foodborne Pathogenic and Spoilage Bacteria and Fungi In Vitro and in Food Matrices

Several novel antimicrobials with different concentrations of olive, pomegranate, and orange fruit pulp extracts were produced from agricultural byproducts and, after lyophilization, their antimicrobial activity and potential synergistic effects were evaluated in vitro and in food samples against foodborne pathogenic and spoilage bacteria and fungi. The Minimum Inhibitory of the tested bacteria was 7.5% or 10%, while fungi were inhibited at a concentration of 10% or above. The optical density of bacterial and yeast cultures was reduced to a different extent with all tested antimicrobial powders, compared to a control without antimicrobials, and mycelium growth of fungi was also restricted with extracts containing at least 90% olive extract. In food samples with inoculated pathogens and spoilage bacteria and fungi, the 100% olive extract was most inhibitory against E. coli, S. typhimurium, and L. monocytogenes in fresh burger and cheese spread samples (by 0.6 to 1.8 log cfu/g), except that S. typhimurium was better inhibited by a 90% olive and 10% pomegranate extract in burgers. The latter extract was also the most effective in controlling the growth of inoculated fungi (Aspergillus niger, Penicillium italicum, Rhodotorula mucilaginosa) in both yogurt and tomato juice samples, where it reduced fungal growth by 1–2.2 log cfu/g at the end of storage period. The results demonstrate that these novel encapsulated extracts could serve as natural antimicrobials of wide spectrum, in order to replace synthetic preservatives in foods and cosmetics.     

Mn(III)-based reaction of alkenes with quinolinones. Formation of peroxyquinolinones and quinoline-related derivatives

The reactions of 1,1-disubstituted alkenes with 4-hydroxyquinolin-2(1H)-ones under both Mn(III)-catalyzed aerobic oxidation conditions at room temperature and Mn(III)-mediated oxidation conditions at reflux temperature are described. The Mn(III)-catalyzed aerobic oxidation afforded bis(hydroperoxyethyl)quinolinones and azatrioxa[4.4.3]propellanes, while the oxidation with Mn(OAc)₃·2H₂O produced furo[3,2-c]quinolin-4-one analogues. The existence of a substituent at the 3-position of the 4-hydroxyquinolin-2(1H)-ones prevented a double reaction with the alkenes, and (endoperoxy)quinolinones and/or (hydroperoxyethyl)quinolinones were obtained under the Mn(III)-catalyzed aerobic conditions, while furo[3,2-c]quinolinone hemiacetals and vinylquinolinones were selectively produced under the Mn(III)-mediated oxidation conditions depending on the reaction temperature and times. Cyclic assembly of quinolinone-related 1,3-dicarbonyl compounds such as dihydropyridinones, pyranones, and dimedone derivatives was also examined under elevated temperature conditions.     

Biphasic kinetic investigations on the evaluation of non-salt forming reductants for Pu(IV) stripping from tributyl phosphate and N,N-dihexyl octanamide solutions in n-dodecane

The relative stability of different oxidation states of actinide elements is influenced by the nature of complexes formed and redox equilibria in aqueous/non-aqueous solutions. The reduction/stripping studies on Pu(IV) ions from loaded organic phases of 1.1 M tributyl phosphate and of 1.1 M N,N-dihexyl octanamide in n-dodecane were studied using organic soluble tert-butyl hydroquinone (TBH) and aqueous soluble reductants like acetaldoxime (AX) and hydroxyurea (HU). These studies were carried out as a function of reductant and nitric acid concentration (0.5–4 M HNO₃) and of time. The changes in Pu oxidation states were followed by spectrophotometry for TBH and by distribution ratio values for AX and HU as reductants. Spectrophotometric investigations using TBH as reductant showed that it was desirable to strip Pu(III) formed after reduction of Pu(IV) in the organic phase, which may otherwise be reconverted to extractable Pu(IV) by in situ generated HNO₂ from oxidative degradation of TBH to tert-butyl quinone. Similarly, the biphasic reduction/stripping of Pu(IV) using AX and HU as reductant rate was affected adversely with increased aqueous phase acidity. This data will help in the accurate simulation of Pu separation processes using these reductants in mixer-settlers/pulsed columns or centrifugal contactors.     

Determination of plutonium oxidation states at trace levels pertinent to nuclear waste disposal

A scheme was developed for the determination of oxidation states of plutonium in environmental samples. The method involves a combination of solvent extractions and coprecipitation. It was tested on solutions with both high-level and trace-level concentrations. The scheme was used to determine Pu oxidation states in solutions from solubility experiments in groundwater from a potential nuclear waste disposal site. At steady-state conditions, Pu was found to be soluble predominantly as Pu(V) and Pu(VI).     

Determining the distribution of Pu, Np, and U oxidation states in dilute NaCl and synthetic brine solutions

The effect of iron powder (Fe⁰) on the reduction of Pu(VI),Np(V), and U(VI) was investigated in dilute NaCl and synthetic brines. Thetotal concentrations and oxidation states of the actinides in these solutionswere monitored as functions of pC H +, Eh, and time using techniques includingVis/Near IR absorption spectrophotometry, solvent extraction, activity counting,and inductively coupled plasma spectroscopy-mass spectrometry (ICP-MS). Whenconcentrations were too low and the oxidation states could not be directlydetermined by spectrophotometry or solvent extraction, comparing the measuredconcentrations with the solubility of reference systems helped to define thefinal oxidation states. In general, the reduction was more rapid, and couldproceed further, in the dilute NaCl solution than in the brine solutions.The experimental observations can be summarized as follows: (1) in the diluteNaCl solutions (pC H + 7 to 12), all three actinides, Pu(VI), Np(V) and U(VI),were reduced to lower oxidation states (most likely the tetravalent state)within a few days to a few months in the presence of Fe⁰; (2) insynthetic brines containing Fe⁰ (pC H + 8 to 13), the reductionof Pu(VI) was much slower than in the dilute NaCl solution. The dominant oxidationstate of Pu in the brine solution was Pu(V), the concentration of which wascontrolled by the electrochemical potential and could probably be representedby a heterogeneous redox reaction PuO₂ . xH₂O(s) PuO₂ + +e ^—; (3) in synthetic brines containing Fe⁰ (pC H + 8 to 13), Np(V) was probably reduced to Np(IV) and precipitatedfrom the solution; (4) in synthetic brines containing Fe⁰ (pC H+ 8 to 13), no significant reduction of U(VI) was observed within 55 days.     

Preparation of 240Pu and 242Pu targets to improve cross-section measurements for advanced reactors and fuel cycles

²⁴⁰Pu and ²⁴²Pu targets were prepared by the so-called “molecular plating” on an Al backing for cross-section measurements. The total activity of the actinide layer was determined by low-geometry alpha-particle counting. The atomic abundances of the two Pu materials were determined via thermal ionization mass spectrometry. A radiochemical separation was performed by anion exchange prior to the preparation of the layers to prevent interferences with the ingrown daughter nuclide during the characterization and cross-section measurements. The targets were prepared to be used in the project “Metrology for New Generation Nuclear Power Plants” (MetroFission), within the frame of the European Metrology Research Programme, directed to improve the knowledge on neutron cross sections through metrological approaches. For measurements of the ²⁴⁰Pu(n,f) and ²⁴²Pu(n,f) cross sections ²⁴⁰Pu and ²⁴²Pu targets were produced and mounted in fission chambers. In parallel, ²⁴⁰Pu and ²⁴²Pu targets were prepared for the ANDES project (Accurate Nuclear Data for Nuclear Energy Sustainability) for cross-section measurements at the CERN neutron time-of-flight facility n_TOF, and the Van de Graaff laboratories of IRMM and CNRS/CENBG.     

A novel Np–Pu separation procedure based on extraction with di-(chlorophenyl)-dithiophosphinic acid in nitric solution

The extraction behavior of Pu(III), Pu(IV), Np(IV) and Np(V) with di(chlorophenyl)-dithiophosphinic acid (DCPDTPA) in toluene from nitric acid solutions was studied systematically. In aqueous solution with high nitric acid concentration, the extraction capability (represented by distribution ratio D) for Pu and Np in different valences with DCPDTPA comes as D _Np(IV) > D _Pu(IV) > D _Np(V) > D _Pu(III). A new radiochemical procedure for Np/Pu separation based on DCPDTPA extraction was proposed and tested with simulated samples. The recoveries of Np and Pu are as high as 80 % after the whole separation procedure, with the decontamination factor of trivalent lanthanide fission product element (e.g. Eu) greater than 1.5 × 10⁴. The decontamination factor of Pu–Np is 2.0 × 10³, while the decontamination factor of Np–Pu is greater than 4.8 × 10³ after additional purification.     

Kinetics of Pu(IV) sorption by smectite-rich natural clay

Kinetics of sorption of Pu(IV) by smectite-rich clay has been studied at varying metal ion concentrations. Different concentrations were achieved using different isotopes of Pu, namely, ²³⁹Pu, ²³⁸Pu and ²³⁷Pu. ²³⁷Pu was produced by alpha induced reaction on ²³⁵U, followed by radiochemical separation of Pu from irradiated U₃O₈ target. The concentrations used are above and below the solubility of Pu(IV) under neutral pH conditions, thereby, indicating the mechanism of sorption reactions of Pu(IV) in typical laboratory experiments and field level observations. Kinetics of Pu(IV) at 10^?13 M concentration was found to be fast whereas at higher metal concentration the rate is governed by a slow step, indicating the role of formation of Pu(IV) polymeric species at the sorbent surface.     

Simultaneous determination of plutonium and americium in biological and environmental samples

A radiochemical method is given to determine the specific activity of²³⁸Pu, and²⁴¹Am from the global fallout in environmental and biological samples. The radiochemical recovery was for human livers Pu: 60–70%, Am: 40–60%; Bran: Pu: 50–70%, Am: 30–40%; Soil: Pu: 50–80%, Am: 30–50%. The resolution of the alpha-spectrum was for soils 30–40 keV and for livers and brans 40–60 KeV. To facilitate the wet ashing of large amounts of bran (15 kg), which are necessary to determine the presently very small activity concentrations of the transuranic elements in these types of samples, a fermentation process was employed. The procedure was tested by using NBS standard reference material and subsequently applied for the determination of Pu and Am from the global fallout in livers, plant tissues (bran), and soils.     

A chemiluminescence study on degradation of gelatine: Biodegradation by bacteria and fungi isolated from cinematographic films

Chemiluminescence (CL) has become a sensitive tool for the study of polymer degradation, induced by exposure to various factors, such us heat, UV-light and oxygen. In this paper, the results obtained with this technique in the study of gelatine samples hydrolytically degraded under sterilisation conditions are presented. Also, photographic gelatine exposed to bacterial and fungal degradations, in water solution and under controlled conditions, have been study by the chemiluminescence emission of their corresponding films and the biodegradation extent was determined by viscosity. The bacteria and fungi employed in this work have been isolated from cinematographic films in a previous work.The high intensities of chemiluminescence emission obtained for gelatines biodegraded by bacteria and fungi, in aqueous solution at 37 and 25 °C, respectively, are different to those obtained in the thermal degradation. The hydrolytic degradation mechanism is through a cleavage of the peptide bond of the protein without significant oxidation of the material. In contrast, biodegradation by bacteria and fungi at low temperatures decreases the molecular weight of the gelatine (viscosity) by the enzymatic activity but, also, produces an important oxidation in the material due to the reactive oxygen species (ROS) generated in the microbial metabolism.     

Chemical Transformation of Humic Acid Molecules under the Influence of Mineral,Fungal and Bacterial Fertilization in the Context of the Agricultural Use of Degraded Soils

The main goal of this work was to study the structural transformation of humic acids (HAs) under the influence of selected strains of fungi (Aspergillus niger and Paecilomyces lilacinus) and bacteria (Bacillus sp., Paenibacillus polymyxa and Bacillus amyloliquefaciens) with/without the presence of NPK fertilizers. Two-year experiments were conducted on two different soils and HAs isolated from these soils were examined for structure, humification degree, and quantity using fluorescence and UV-Vis spectroscopy, elemental analysis, and extraction methods. Results showed that the applied additives contributed to the beneficial transformation of HAs, but effects differed for various soils. HAs from silty soil with higher organic carbon content showed simplification of their structure, and decreases in humification, molecular weight, and aromaticity under the influence of fungi and bacteria without NPK, and with NPK alone. With both fungi and NPK, increases in O/H and O/C atomic ratios indicated an increase in the number of O-containing functional groups. HAs from sandy soil did not show as many significant changes as did those from silty soil. Sandy soil exhibited a strong decline in HA content in the second year that was reduced/neutralized by the presence of fungi, bacteria, and NPK. Periodically observed fluorescence at ~300 nm/450 nm reflected formation of low-molecular HAs originating from the activity of microorganisms.     

ICP-MS analysis of plutonium activities and <Superscript>240</Superscript>Pu/<Superscript>239</Superscript>Pu ratio in alpha spectrometry planchet deposits

Plutonium isotopes were measured by alpha-spectrometry and ICP-MS in sediment samples from two European lakes: Blelham Tarn in U.K. and Stechlin lake in Germany. The ICP-MS measurements were made after alpha-spectrometry counting of the planchets. The planchets were prepared by traditional electrodeposition method after radiochemical extraction, separation and purification of the Pu fraction. A short radiochemical separation using plutonium selective resin, between the two spectrometry measures, is presented. The results show that these two complementary methods are in good agreement, the plutonium activity concentrations are the same. Alpha-spectrometry allows the ²³⁸Pu determination and ICP-MS individual measurement of ²³⁹Pu and ²⁴⁰Pu. ²³⁸Pu/^239+240Pu and ²⁴⁰Pu/²³⁹Pu ratios are calculated to determine the plutonium contamination source. With the results of these two techniques, it could be demonstrate that the plutonium is of global fallout origin.     

Determination of plutonium isotopes in urine samples from radiation workers using <Superscript>236</Superscript>Pu tracer,anion exchange resin and alpha spectrometry

Bioassay technique is used for the estimation of actinides present in the body based on their excretion rate through body fluids. For occupational radiation workers urine assay is the preferred method for monitoring of chronic internal exposure. Determination of low concentrations of actinides such as plutonium, americium and uranium at low level of mBq in urine by alpha spectrometry requires pre-concentration of large volumes of urine. This paper deals with standardization of analytical method for the determination of Pu-isotopes in urine samples using anion exchange resin and ²³⁶Pu tracer for radiochemical recovery. The method involves oxidation of urine followed by co-precipitation of plutonium along with calcium phosphate. Separation of Pu was carried out by Amberlite, IRA-400, anion exchange resin. Pu-fraction was electrodeposited and activity estimated using tracer recovery by alpha spectrometer. Twenty routine urine samples of radiation workers were analyzed and consistent radiochemical tracer recovery was obtained in the range 74–96% with a mean and standard deviation of 85 and 6% respectively.     

Ru(PPh3)(OH)-salen complex: a designer catalyst for chemoselective aerobic oxidation of primary alcohols

Based on the analysis of the mechanism of aerobic oxidation of alcohols using Ru(NO)-salen catalyst, we designed a new complex, Ru(PPh₃)(OH)-salen 3, which was proved to be an excellent catalyst for chemoselective aerobic oxidation of primary alcohols to the aldehydes in the presence of secondary alcohols under ambient and non-irradiated conditions. Complex 3 was also successfully applied to the oxidation of 1-phenyl-1,n-diols to the lactols or the n-hydroxy aldehyde. It is of note that selective oxidation of primary alcohols was achieved even in the presence of activated secondary alcohols.     

Determination of Pu in environmental soil using238Pu as a yield tracer

A procedure for determining Pu in environmental soil using²³⁸Pu as a yield tracer is described. The method involves radiochemical separation and electrodeposition onto a stainless steel disc followed by alpha-spectrometric measurement with a solid-state detector. In order to eliminate error in calculation caused by²³⁸Pu contained in original samples, a new calculating method is introduced in this paper. By using this method, the activity of²³⁸Pu contained in original samples can be substracted from the total activity of samples, to which the²³⁸Pu tracer is added. This procedure has been applied satisfactorily to the determination of Pu in a soil reference sample, which was supplied by the Institute of Metrological Science of China.     

A method for estimation of Pu-isotopes in urine samples using TEVA resin and alpha spectrometry

The conventional method used for estimation of Pu-isotopes in urine samples involves anion exchange resin followed by alpha spectrometry, which takes nearly one working week for complete sample analysis. Since the results of the analysis form an important input for decision making by the plant authorities, it is always preferable to reduce overall analysis time for the estimation of Pu-isotopes in bioassay samples. This paper deals with standardization of a relatively faster method for estimation of Pu-isotopes in bioassay samples using TEVA resin and ²³⁶Pu tracer for radiochemical recovery. The method involves oxidation of urine followed by co-precipitation of plutonium along with calcium phosphate and separation of Pu was carried out using TEVA resin. Pu-fraction was electrodeposited and activity estimated using tracer recovery by alpha spectrometer. Routine urine samples of radiation workers were analyzed and consistent radiochemical tracer recovery was obtained in the range 65–87 % with a mean and SD of 75 and 7.4 %, respectively. The standardized chromatographic technique reduces the analysis time by about 1 day as compared to conventional method for estimation of Pu-isotopes in urine samples.     

Thermoanalytical investigation and biological properties of zinc(II) 4-chloro- and 5-chlorosalicylates with N-donor ligands

New zinc(II) 4- and 5-chlorosalicylate complexes of general formula [Zn(X-sal)₂(L) _n (H₂O) _x ] (where X-sal?=?4-Clsalicylate, 5-Clsalicylate; L?=?N,N-diethylnicotinamide, isonicotinamide, theophylline; n?=?1, 2; x?=?0, 1, 2, 4) were prepared. The complexes were determined by elemental analysis and characterised by infrared spectroscopy. The thermal behaviour of the complexes was studied by simultaneous TG, DTG and DTA methods under dynamic air conditions. The thermal decomposition is a multi-step process. In the first step of the thermal decomposition, water is released in hydrated compounds. The anhydrous compounds start to decompose by the release of organic ligand, followed by chlorosalicylic acid, chlorophenol and carbon monoxide. The final solid product of the thermal decomposition is zinc oxide. The volatile products of the thermal decomposition were determined by mass spectrometry. The antimicrobial activities of the complexes were evaluated against selected pathogen and probiotic bacteria, yeasts and fungi strains. Bioactivities of the tested compounds are different against bacteria, yeasts and filamentous fungi. It was found that bacteria were more sensitive to the studied zinc(II) complex compounds than yeasts or filamentous fungi.     

Impact of Altitudinal Variation on the Phytochemical Profile,Anthelmintic and Antimicrobial Activity of Two Pinus Species

Active components from natural sources are the current focus in most pharmacological research to provide new therapeutic agents for clinical use. Essential oils from the Pinus species have been traditionally used in medicine. This study aimed to investigate the chemical profile of two Pinus species, Pinus halepensis L. and Pinus pinea Mill, from different altitudes in Libya and study the effect of environmental conditions on the biological activities of essential oils. A clevenger apparatus was used to prepare the essential oils by hydrodistillation. Analyses were done using GC/MS. Anthelmintic and antimicrobial activities were tested against the earthworm Allolobophora caliginosa, gram-positive bacteria, gram-negative bacteria, and fungi. Different chemical profiles were observed among all tested essential oils, and terpenes were the most dominant class. All studied essential oils from the Pinus species exhibited a remarkable anthelmintic activity compared to the standard piperazine citrate drug. Pinus halepensis from both altitudes showed broad-spectrum antimicrobial activity against all tested microorganisms, while Pinus pinea was effective against only Escherichia coli. From these findings, one can conclude that there are variations between studied species. The essential oil compositions are affected by environmental factors, which consequently affect the anthelmintic and antimicrobial activity.