Catalytic Action of Metallic Salts in Autoxidation and Polymerization. VII. Polymerization of Methyl Methacrylate by Cobalt(ll) or (III) Acetylacetonate-Dioxane Hydroperoxide

Abstract

Polymerization of methyl methacrylate by Co(II or III) acetylacetonate-dioxane hydroperoxide [abbreviated as Co(acac)2, Co(acac)₃, and DOX HPO, respectively] was carried out in dioxane solvent, and the differences in polymerization rate and the degree of polymerization between two initiating systems were compared. Co(acac)₂-DOX HPO for the initiation of the polymerization system was more effective than Co(acac)₃-DOX HPO. The polymerization rate equations for both initiating systems obtained from kinetic data were as follows. For Co(acac)₂-DOX HPO initiating system: R_p=k [M]^3/2[Co(acac)₂]^1/7[DOX HPO]^?     

Redox kinetics of metal complexes in nonaqueous solutions. V. Kinetics and mechanism of the iron (II) reduction of the acetylacetonates of manganese (III) and cobalt (III) in acetonitrile

The electron transfer step of the reduction of Mn(acac)₃ and Co(acac)₃ by Fe(II) in acetonitrile is preceded by the one-ended dissociation of an acac ligand and the formation of a binuclear bridged complex. After the electron transfer has taken place through the bridging ligand, the complex dissociates into the products M(acac)₂ (M = Mn, Co) and Fe(acac)²⁺. These primary reaction products could not be identified, since the transfer of acac from M(acac)₂ to Fe(acac)²⁺ is too rapid, producing ultimately Fe(acac)₃ and M²⁺. The M(III)-oxygen cleavage is accelerated by M(acac)₂. Furthermore, the dissociation of the binuclear intermediate is catalyzed by the M(acac)₃ reactant. Mn(acac)₃ is reduced more than a thousand times faster than Co(acac)₃.     

Synthesis and structural studies of 2-acetylthiophene-2-thenoylhydrazone complexes of oxovanadium(IV), manganese(II), cobalt(II), nickel(II), copper(II), zinc(II), cadmium(II) and mercury(II)

Complexes with chemical compositions VO(Hatth)₂SO₄, VO(Hatth)₂SO₄·py, [M(Hatth)₂Cl·H₂O]Cl [M = Mn(II), Co(II) and Ni(II)], [Cu(Hatth)₂Cl]₂Cl₂, [Cu(Hatth)₂· Cl·py]Cl, [Cd(Hatth)₂Cl]Cl, M(Hatth)₂Cl₂ [M = Zn(II) and Hg(II)], VO(atth)₂, VO(atth)₂py, M(atth)₂(py)₂ [M = Mn(II) and Cu(II)], M(atth)₂(H₂O)₂ [M = Mn(II), Co(II), Ni(II), Cu(II) and Zn(II)], Hatth = 2-acetylthiophene-2-thenoylhydrazone, and atth, its deprotonated form, have been prepared and characterized by analytical data, molar conductance, magnetic susceptibility, electronic and photoacoustic, ESR, IR and NMR spectral studies. X-ray diffraction study has been used to determine the shape and the dimensions of the unit lattice of copper(II) complexes.     

Metal-Containing Initiator Systems. IX. Radical Polymerizations of Vinyl Monomers by Various Metal Acetylacetonates

Abstract

A study of the polymerization of styrene, methyl methacrylate, acrylonitrile, vinyl acetate, and vinyl chloride initiated by various metal acetylacetonates [Me(acac)_x] has been made. It was found that Mn(acac)₃ was the most effective initiator, and Co(acac)₃, Mn(acac)₂, Cu(acac)₂, and Cr(acac)₃ showed moderate activity for the polymerization of methyl methacrylate at 60°C. However, the other, Me(acac)_x, had no effect or served as inhibitors. The addition of some additives such as halogen compounds did not accelerate polymerization of methyl methacrylate by Mn(acac)₃, From the results of polymerization and copolymerization of methyl methacrylate by Mn(acac)₃, it was concluded that the polymerization proceeded via an ordinary radical mechanism and the activation energy for initiation was 25.2 kcal/mole. The initiation mechanism of vinyl polymerization by Me(acac)_x was studied on the basis of the complex formation with the monomer.     

Heterometallic MIIRuIII2 compounds constructed from trans-[Ru(Salen)(CN)2]- and trans-[Ru(Acac)2(CN)2]-. Synthesis, structures, magnetic properties, and density functional theoretical study

The synthesis, structures, and magnetic properties of four cyano-bridged M(II)Ru(III)2 compounds prepared from the paramagnetic Ru(III) building blocks, trans-[Ru(salen)(CN)2]- 1 [H2salen = N,N'-ethylenebis(salicylideneimine)] and trans-[Ru(acac)2(CN)2]- (Hacac = acetylacetone), are described. Compound 2, {Mn(CH3OH)4[Ru(salen)(CN)2]2}.6CH3OH.2H2O, is a trinuclear complex that exhibits antiferromagnetic coupling between Mn(II) and Ru(III) centers. Compound 3, {Mn(H2O)2[Ru(salen)(CN)2]2.H2O}n, has a 2-D sheetlike structure that exhibits antiferromagnetic coupling between Mn and Ru, leading to ferrimagnetic-like behavior. Compound 4, {Ni(cyclam)[Ru(acac)2(CN)2]2}.2CH3OH.2H2O (cyclam = 1,4,8,11-tetraazacyclotetradecane), is a trinuclear complex that exhibits ferromagnetic coupling. Compound 5, {Co[Ru(acac)2(CN)2]2}n, has a 3-D diamond-like interpenetrating network that exhibits ferromagnetic ordering below 4.6 K. The density functional theory (DFT) method was used to calculate the molecular magnetic orbitals and the magnetic exchange interaction between Ru(III) and M(II) (Mn(II), Ni(II)) ions.     

Spectral, magnetic and biological studies of 1,4-dibenzoyl-3-thiosemicarbazide complexes with some first row transition metal ions

The ligand 1,4-dibenzoyl-3-thiosemicarbazide (DBtsc) forms complexes [M(DBtsc-H)(SCN)] [M = Mn(II), Co(II) or Zn(II)], [M(DBtsc-H) (SCN)(H₂O)] [M = Ni(II) or Cu(II)], [M(DBtsc-H)Cl] [M = Co(II), Ni(II), Cu(II) or Zn(II)] and [Mn(DBtsc)Cl₂], which have been characterized by elemental analyses, magnetic susceptibility measurements, UV/Vis, IR,¹H and¹³C NMR and FAB mass spectral data. Room temperature ESR spectra of the Mn(II) and Cu(II) complexes yield <g> values, characteristic of tetrahedral and square planar complexes respectively. DBtsc and its soluble complexes have been screened against several bacteria, fungi and tumour cell lines.     

LAMMA mass spectra of β-diketone,bis(benzoylacetone)ethylenediimine and bis(salicylidene)ethylenediimine complexes of some transition metals

Complexes of 2,4-pentanedione (acetylacetone, acac), [Cu(acac)₂], [VO(acac)₂] and [CO(acac)₃], and the chromium(III) derivative of 3-methyl-2,4-pentanedione (methylacetylacetone, meac), [Cr(meac)₃], the ligands bis(benzoylacetone)ethylenediimine and bis(salicylidene)ethylenediimine, and their cobalt(II), nickel(II) and copper(II) chelates were analysed by laser desorption mass spectrometry (LAMMA) and compared to electron impact (EI) results. The positive ion LAMMA spectra generally reveal mostly small fragments, although metal cationization peaks are seen for most complexes. Negative ion LAMMA produce carbon clusters and some structurally important fragments.     

Synthesis of polyacrylonitrile mediated by manganese(III) acetylacetonate (Mn(acac)3) and 2‐cyanoprop‐2‐yl dithionaphthalenoate

2‐Cyanoprop‐2‐yl dithionaphthalenoate (CPDN) was successfully used as the chain transfer agent to prepare polyacrylonitrile in combination with manganese(III) acetylacetonate (Mn(acac)₃) as the initiator. The novel polymerization exhibited well “living”/controlled characteristics. The polymerization behavior was revealed to comply with features of reversible addition–fragmentation chain transfer polymerization process. Mn(acac)₃ played a key role as the initiator rather than the radical trapping agent in polymerization and exhibited better control performance than azo‐initiator. The narrowest molecular weight distribution was 1.31 under the condition of [AN]₀:[Mn(acac)₃]₀:[CPDN]₀ = 200:1:0.025 and AN:DMF = 1:1 (V/V). Various feed ratios of Mn(acac)₃ and CPDN were also investigated in detail. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1305–1309     

Living radical polymerization of acrylates mediated by 1,3-bis(2-pyridylimino)isoindolatocobalt(II) complexes: monitoring the chain growth at the metal

A new type of mediator for cobalt(II)-mediated radical polymerization is reported which is based on 1,3-bis(2-pyridylimino)isoindolate (bpi) as ancillary ligand. The modular synthesis of the bis(pyridylimino)isoindoles (bpiH) employed in this work is based on the condensation of 2-aminopyridines with phthalodinitriles. Reaction of the bpiH protio-ligands with a twofold excess of cobalt(II) acetate or cobalt(II) acetylacetonate in methanol gave [Co(bpi)(OAc)], which crystallize as coordination polymers, and a series of [Co(acac)(bpi)(MeOH)], which are mononuclear octahedral complexes. Upon heating the [Co(acac)(bpi)(MeOH)] compounds to 100 degrees C under high vacuum, the coordinated methanol was removed to give the five-coordinate complexes [Co(acac)(bpi)]. The polymerization of methyl acrylate at 60 degrees C was investigated by using one molar equivalent of the relatively short-lived radical source 2,2'-azobis(4-methoxy-2,4-dimethylvaleronitrile) (V-70) as initiator (monomer/catalyst/V-70: 600:1:1). The low solubility of the acetato complexes inhibits their significant activity as mediators in this reaction, whereas the acetylacetonate complexes control the radical polymerization of methyl acrylate more effectively. The radical polymerizations of the hexacoordinate complexes did not show a linear increase in number-average molecular weight (M(n)) with conversion; however, the polydispersities were relatively low (PDI=1.12-1.40). By using the pentacoordinate complexes [Co(acac)(bpi)] as mediators, a linear increase in M(n) values with conversion, which were very close to the theoretical values for living systems, and very low polydispersities (PDI<1.13) were obtained. This was also achieved in the block copolymerization of methyl acrylate and n-butyl acrylate. The intermediates with the growing acrylate polymer radical ((.)PA) were identified by liquid injection field desorption/ionization mass spectrometry as following the general formula [Co(acac)(4-methoxy-bpi)-(MA)(n)-R] (MA: methyl acrylate; R: C(CH(3))(CH(2)C(CH(3))(2)OCH(3))CN), a notion also confirmed by NMR end-group analysis.     

2-Pyridinamin-Addukte von Übergangsmetall-bis(acetyl-acetonaten) und ihre Reaktionen. Hydrogencarbonat als Chelatligand in cis-(Ampy)2Co(acac)(HCO3)

2-Pyridinamine Adducts of Transition Metal Bis(acetylacetonates) and their Reactions. Hydrogencarbonate as a Chelating Ligand in cis-(Ampy)₂Co(acac)(HCO₃) The reaction of cobalt(II) salts, acetylacetone (acacH), 2-pyridinamine (Ampy), and the carbon dioxide of the air in methanol affords a mixture of (Ampy)₂Co(acac)₂( II ) and (Ampy)₂Co(CO₃)(H₂O)₂. On heating in toluene, appropriately in the presence of carbon dioxide, these complexes are converted into cis-(Ampy)₂Co(acac)(HCO₃) ( III ). Characteristic of compound III is a four-membered ring with the hydrogencarbonate as a bidentate ligand. The two Co? O distances are distinctly different (215.9 and 224.4 pm). In the complexes II and III 2-pyridinamine is a bidentate ligand coordinating by the endo-nitrogen. The Co-n-N bond lengths vary between 210.9 and 225.3 pm. Reasons are both the different trans-influence of the hydrogencarbonate or the acetylacetonato donor atoms and the π-interaction between cobalt(II) and the pyridine ring. This interaction is more significant in the cis-complex III . II and III are stabilized by a system of N? H …? O- and O? H …?O-bridges. With nickel(II) complexes analogous to II and III were obtained, while only the type II was characterized for manganese( II ).     

Synthesis and characterization of divalent manganese,cobalt, nickel,copper and zinc complexes with nicotinic acid

Coordination compounds of the transition metal(II) acetylacetonates of the formula [M(NA)₂(acac)₂ ]_n (M = Mn, Co, Ni, Cu and Zn; NA = nicotinic acid and acac = acetyl-acetonate anion) have been synthesized and characterized by chemical analysis, magnetic susceptibility, ligand-field spectra, IR and far-IR spectral measurements as well as photoacoustic spectroscopy in the solid state. Tentative stereochemistries for the complexes isolated in the solid state are suggested. The ligand-field parameters 10 Dq, B, β, λ and CFSE are calculated for cobalt and nickel complexes and are in good agreement with the proposed geometries. The metal ions attain six-coordination through the four oxygens of the anion and two donor atoms of the nicotinic acid ligands acting always as monodentate ligands. The formation of the compound results in a considerable shift of v(M-O) to lower frequencies in all the compounds related to parent acetylacetonates.     

Manganese(II) β-diketonate catalyzed oxidation of cyclohexane bytert-butyl hydroperoxide

Oxidation of cyclohexane bytert-butyl hydroperoxide was carried out in acetonitrile solution at room temperature in the presence of manganese(II) β-diketonate complexes, Mn(acac)₂, Mn(acac)₂.2H₂O, Mn(ba)₂.H₂O, Mn(dbm)₂ and Mn(dbm)₂.2H₂O (where acacH=acetylacetone, baH=benzoylacetone and dbmH=dibenzoyl-methane). Cyclohexanol and cyclohexanone were obtained as the products. Oxidation ofcis-cyclooctene gave the corresponding epoxide together with two minor byproducts in the presence of Mn(acac)₂.2H₂O and Mn(dbm)₂.2H₂O. A mechanistic pathway predominantly involving autoxidation is proposed. IPCL communication No. 322     

Complexes of NS and NSO donor ligands. Nickel(II), copper(II) and cobalt(II) complexes of glyoxal bis(morpholineN-thiohydrazone) and diacetyl bis(morpholineN-thiohydrazone)

Summary Reactions of glyoxal bis(morpholineN-thiohydrazone), H₂gbmth, with NiCl₂·6H₂O, Ni(OAc)₂·4H₂O, Ni(acac)₂· H₂O, CuCl₂·2H₂O, Cu(OAc)₂·H₂O, Cu(acac)₂, CoCl₂· 6H₂O, Co(OAc)₂·4H₂O and Co(acac)₂·2H₂O yield complexes of the type [M(gbmth)], [M=Ni^II, Cu^II or Co^II]. Diacetyl reacts with morpholineN-thiohydrazide in the presence of nickel salts to yield [Ni^II(dbmth)], [Ni^II(dmth)(OAc)]H₂O and [Ni^II(Hdmth)(NH₃)Cl₂] involving N₂S₂ and NSO donor ligands. Copper and cobalt complexes of N₂S₂ and NSO donor ligands with compositions [Cu^II(dbmth)], [Co^II(dbmth)]·4H₂O and [Co^II(H₂dbmth)]Cl₂, have been isolated. The compounds have been characterised by elemental analyses, magnetic moments, molar conductance values and spectroscopic (electronic and infrared) data.     

The Structure of Mn(acac)3—Experimental Evidence of a Static Jahn–Teller Effect in the Gas Phase

The structure of free manganese(III) tris(acetylacetonate) [Mn(acac)₃] was determined by mass‐spectrometrically controlled gas‐phase electron diffraction. The vapor of Mn(acac)₃ at 125(5) °C is composed of a single conformer of Mn(acac)₃ in C₂ symmetry with the central structural motif of a tetragonal elongated MnO₆ octahedron and 47(2) mol % of acetylacetone (Hacac) formed by partial thermal decomposition of Mn(acac)₃. Three types of Mn−O separations have been refined (r_h1=2.157(16), 1.946(5), and 1.932(5) Å. We have found no indication for a significant deviation of the ‐C−C−C−O−Mn−O‐ six‐membered rings from planarity, which is observed in the solid state.     

Synthesis and characterization of self-assembled coordination polymers of N-diaminomethylene-4-(3-formyl-4-hydroxy-phenylazo)-benzenesulfonamide

The azo dye ligand N-diaminomethylene-4-(3-formyl-4-hydroxy-phenylazo)-benzenesulfonamide (HL) and Cu(II), Co(II), and Mn(II) coordination polymers were synthesized in addition to a non-polymeric Pd(II) complex. In all complexes, the ligand bonds to the metal ion through the formyl and α-hydroxy oxygen atoms. The sulfonamide oxygen also coordinates to the metal. The complexes are formulated as [ML₂] _n , where M?=?Cu(II), Co(II), and Mn(II), and [ML(Cl)(H₂O)], where M?=?Pd(II). On the basis of spectral studies and magnetic susceptibility measurements, an octahedral geometry was assigned to Co(II) and Mn(II) complexes, tetragonally elongated octahedral geometry for Cu(II) complex, while the Pd(II) complex was found to be square planar. Crystallization of Cu(II) complex from DMF afforded single crystals of general formula {[Cu(L)₂]?·?3DMF} _n (2). X-ray structural analysis of 2 revealed that each Cu(II) adopts elongated octahedral geometry affording 1-D chains. The chains are connected by hydrogen bonds, resulting in the formation of 2-D supramolecular assemblies. The crystal structure of HL has also been determined and discussed. Cyclic voltammetric behavior of the ligand and some complexes are also discussed.     

Quinone transfer radical polymerization (QTRP) of styrene: Catalysis by different metal complexes

Styrene has been polymerized by a Quinone Transfer Radical Polymerization (QTRP) based on the redox reaction of an ortho‐quinone and a metal catalyst. Several metal acetylacetonates have been tested in this work. The radical polymerization of styrene is largely controlled when phenanthrenequinone (PhQ) is used with catalytic amounts of Co(acac)₂, Ni(acac)₂, Mn(acac)_{2 or 3}, and Al(acac)₃. As a rule, in the presence of all these metallic complexes, the polystyrene molar mass increases with the monomer conversion, and polydispersity (M_w/M_n) is in the 1.3–1.6 range (at least until 40% monomer conversion). Styrene polymerization has also been resumed by polystyrene chains prepared by QTRP. In the specific case of manganese acetylacetonates, an amine or phosphine ligand has to be added for the control to be effective. Finally, two mechanistic hypotheses have been proposed, depending on whether the oxidation state of the metal can be easily changed or not. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2723‐2733, 2005     

Spectral,thermal and magnetic investigations of Mn(II), Co(II), Ni(II), Cu(II), Zn(II) and Cd(II) 4-methylphthalates

Conditions for the preparation of Mn(II), Co(II), Ni(II), Cu(II), Zn(II) and Cd(II) 4-methylphthalates were investigated and their composition, solubility in water at 295 K and magnetic moments were determined. IR spectra and powder diffraction patterns of the complexes prepared with molar ratio of metal to organic ligand of 1.0:1.0 and general formula: M [ CH₃C₆H₃(CO₂)₂]·nH₂o (n=1-3) were recorded and their decomposition in air were studied. During heating the hydrated complexes are dehydrated in one (Mn, Co, Ni, Zn, Cd) or two steps (Cu) and next the anhydrous complexes decompose to oxides directly (Cu, Zn), with intermediate formation of carbonates (Mn, Cd), oxocarbonates (Ni) or carbonate and free metal (Co). The carboxylate groups in the complexes studied are mono- and bidentate (Co, Ni), bidentate chelating and bridging (Zn) or bidentate chelating (Mn, Cu, Cd). The magnetic moments for paramagnetic complexes of Mn(II), Co(II), Ni(II) and Cu(II) attain values 5.92, 5.05, 3.36 and 1.96 M.B., respectively. This revised version was published online in July 2006 with corrections to the Cover Date.     

Synthesis,characterization and reactivity studies of dichloroacetylacetonato acetylacetone ruthenium(III)

Summary The Ru^III complex [RuCl₂(acac)(acacH)] (acacH = acetylacetone) was isolated in high yield by reacting RuCl₃ with acacH. The compound was used as a convenient starting material for the synthesis of a variety of Ru^III complexes, viz. [RuCl₂(acac)L₂] (L = PPh₃, AsPh₃, py, MeCN, Me₂SO, o-phenylenediamine; L₂ = phen or bipy) and M₂[RuCl₄(acac)] (M = Me₄N, Rb or Cs). The compounds were characterized by physicochemical and spectroscopic methods.     

Synthesis of organo-platinum(II) and -palladium(II) complexes ofN-phenyl- andN-(p-Tolyl)pyrazole

Summary When platinum(II) chloride dissolved in acetic acid containing concentrated hydrochloric acid was refluxed withN-phenylpyrazole(liphpz) andN-(p-tolyl)pyrazole (Htlpz), complexes of composition [Pt(N-C)Cl]₂ (N-C = phpz, tlpz) were obtained, in which phpz and tlpz are coordinated through nitrogen and carbon forming a five membered metallocycle. Similar palladium(II) complexes [Pd(N-C)Cl]₂ were easily prepared by the reaction of palladium(II) chloride with Hphpz and Htlpz in methanol in the presence of lithium chloride. These [M(N-C)CI]₂ complexes reacted with tri-n-butylphosphine (PBu₃) and pyridine (py) to give the adducts [M(N-C)ClL](L = PBu₃, py). Ethylenediamine(en) and acetylacetone(Hacac) gave IPd(phpz)(en)]Cl and [Pd(phpz)(acac)] respectively. These new complexes are characterized by means of¹H-n.m.r. and i.r. spectra, and probable structures are proposed.Reprints of this article are not available.     

Oxidative thermolysis of Mn(acac)3 on the surface of γ-alumina support

Precipitated γ-alumina support was decorated with Mn(acac)₃ by incipient wetness impregnation with toluene solutions containing Mn(acac)₃ in amount equivalent to loading of 0.35, 0.74, 1.38, 2.38 and 3.50 Mn(acac)₃ moleculs per nm² of the support. In order to evaluate the mechanism of Mn(acac)₃ interaction with the surface of γ-alumina support and subsequent transformations of the supported Mn(acac)₃ species, oxidative thermolysis of Mn(acac)₃/Al₂O₃ samples in air was studied by diffuse reflectance FTIR, thermogravimetric analysis (TG/DTG), differential thermal analysis (DTA) and XRD. It has been found out that decoration of γ-Al₂O₃ support with Mn(acac)₃ results in the formation of surface bound Mn(acac)_3−x species when Mn(acac)₃ loading does not exceed 1.38 Mn(acac)₃/nm². At higher Mn(acac)₃ loading the formation of the supported bulk-like Mn(acac)₃ species also occurs. The interaction of Mn(acac)₃ molecules with the support surface occurs via substitution of acetylacetonate ligand(s) with the oxygen atom of surface hydroxyl group(s) accompanied by elimination of acetylacetone molecules. The evolved acetylacetone reacts with the alumina surface that results in the formation of surface Al(acac)_3−x species. The oxidative thermolysis of Mn(acac)_3−x species on the surface of γ-alumina proceeds via partial elimination of acetylacetonate ligands and partial oxidation of the remaining ligands without destruction of their cyclic structure within 425-550 K. The complete oxidative destruction of acetylacetonate ligands takes place within 600-700 K and results in the formation of manganese oxide species on the alumina surface. The dispersed surface manganese oxide species originate upon the oxidative thermolysis of the surface bound Mn(acac)_3−x species while crystalline Mn₂O₃ phase results from the supported bulk-like Mn(acac)₃ species.