KINETICS OF FORMATION AND STABILITY CONSTANTS OF MONO AND BIS l-TYROSINE COMPLEXES OF Cu(II), Co(II), AND Ni(II)

Abstract

The kinetics and stability constants of l-tyrosine complexation with copper(II), cobalt(II) and nickel(II) have been studied in aqueous solution at 25° and ionic strength 0.1 M. The reactions are of the type M(HL)^(3-n)+ _n-1 + HL- ? M(HL)^(2-n)+_n(k_n, forward rate constant; k_-n, reverse rate constant); where M=Cu, Co or Ni, HL^? refers to the anionic form of the ligand in which the hydroxyl group is protonated, and n=1 or 2. The stability constants (K_n=k_n/k_-n) of the mono and bis complexes of Cu²⁺, Co²⁺ and Ni²⁺ with l-tyrosine, determined by potentiometric pH titration are: Cu²⁺, log K₁=7.90 ± 0.02, log K₂=7.27 ± 0.03; Co²⁺, log K₁=4.05 ± 0.02, log K₂=3.78 ± 0.04; Ni²⁺, log K₁=5.14 ± 0.02, log K₂=4.41 ± 0.01. Kinetic measurements were made using the temperature-jump relaxation technique. The rate constants are: Cu²⁺, k₁=(1.1 ± 0.1) × 10⁹ M ^?1 sec^?1, k_-1=(14 ± 3) sec^?1, k₂=(3.1 ± 0.6) × 10⁸ M ^?1 sec^?1, k^?2=(16 ± 4) sec^?1; Co²⁺, k₁=(1.3 ± 0.2) × 10⁶ M ^?1 sec^?1, k_-1=(1.1 ± 0.2) × 10² sec^?1, k₂=(1.5 ± 0.2) × 10⁶ M ^?1 sec^?1, k_-2=(2.5 ± 0.6) × 10² sec^?1; Ni²⁺, k₁=(1.4 ± 0.2) × 10⁴ M ^?1 sec^?1, k_-1=(0.10 ± 0.02) sec^?1, k₂=(2.4 ± 0.3) × 10⁴ M ^?1 sec^?1, k_-2=(0.94 ± 0.17) sec^?1. It is concluded that l-tyrosine substitution reactions are normal. The presence of the phenyl hydroxyl group in l-tyrosine has no primary detectable influence on the forward rate constant, while its influence on the reverse rate constant is partially attributed to substituent effects on the basicity of the amine terminus.     

The triplet state of 4-nitro-N,N-dimethynaphthylamine

Nanosecond laser photolytic studies of 4-nitro-N,N-dimethylnaphthylamine (4-NDMNA) in nonpolar and polar solvents at room temperature show a transient species with an absorption maximum in the 500-510-nm range. This species is assigned to the lowest triplet excited state of 4-NDMNA. The absorption maximum of this state is independent of solvent polarity, and its lifetime is a function of the hydrogen donor efficiency of the solvent. In n-hexane the lifetime 1/k of the triplet state is 9.1 × 10^?6 sec, while in acetonitrile 1/k is 2.0 × 10^?7 sec. The hydrogen abstraction rate constant k_H of the triplet state with tributyl tin hydride (Bu₃SnH) in n-hexane is 1.7 × 10⁷M^?1·sec^?1, while in the case of isopropyl alcohol as hydrogen donor, k_H is 4.0 × 10⁷M^?1·sec^?1. The activation energy for the hydrogen abstraction by the triplet state from Bu₃SnH in deaerated n-hexane is 0.6 kcal/mol. The lack of spectral shift with increasing solvent polarity, and the appreciable hydrogen abstraction reactivity of the triplet state, also independent of solvent polarity, seem to indicate that this excited state is an n-π* state which retains its n-π* character even in polar media.     

Temperature dependence of the reaction rate constants for O(3P) atoms with C2H4, C3H6 and NO(M = N2O), determined by a modulation technique

Rate constants for the reaction of O(³P) atoms with C₃H₄, C₃H₆ and NO(M = N₂O) have been measured over the temperature range 300–392°K using a modulation-phase shift technique. The Arrhenius expressions obtained are:C₂H₄, k₂ = 3.37 × 10⁹ exp[?(1270 ± 200)/RT]liter mole^?1 sec^?1,C₃H₆, k₂ = 2.08 × 10⁹ exp[?(0 ± 300)/RT]liter mole^?1 sec^?1,NO(M = N₂O), k₁ = 9.6 × 10⁹ exp[(900 ± 200/RT]liter² mole^?2 sec^?1.These temperature dependencies of k₂ are in good agreement with recent flash photolysis-resonance flourescence measurements, although lower than previous literature values.     

Inhibition of Emulsin by D-Gluconhydroximo-1,5-lactone and Related Compounds

At pH 4.5 (citrate buffer), D -gluconhydroximo-lactone ( 2 ), the N-methylurethane 3 and the N-phenylurethane 4 inhibit competitively the hydrolysis of p-nitrophenyl β-D -glucopyranoside by emulsin. The IC₅₀ values of 2, 3 , and 4 were 1.6 × 10^?4, 1.0 × 10^?4, and 5.8 × 10^?6 M , respectively. The K_i values of 2 and 4 were 9.8 × 10^?5 and 2.3 × 10^?6 M , respectively, while D-glucono-1,5-lactone ( 1 ) showed IC₅₀ = 1.1 × 10^?4 M and K_i = 3.7 × 10^?5 M .     

Kinetics and mechanisms of substitution reactions with sulfur-containing nucleophiles in aqueous acid solutions. I—rates of reactions of some tetrahalopalladate (II) anions with thiourea and selenourea

The activation energy parameters for the reaction of PdX (X=Cl^?, Br^?) in aqueous halide acid solution with thiourea (tu) and selenourea (seu) have been determined. High rates of reaction parallel low enthalpies and appreciable negative entropy of activation. The rate law in each case simplifies to k_obs=k[L] where L=tu or seu, and only ligand-dependent rate constants are observed at 25°C. The ligand-dependent rate constants for the first identifiable step in the PdCl + X system is (9.1±0.1) × 10³ M^?1 sec^?1 and (4.5±0.1) × 10⁴ M^?1 sec^?1 for X=tu and seu, respectively, while for the PdBr + X system it is (2.0±0.1) × 10⁴ M^?1 sec^?1 and (9.0±0.1) × 10⁴ M^?1 sec^?1 for X=tu and seu, respectively.     

Equilibrium,kinetics, and mechanism of the malonic acid–iodine reaction

The equilibrium constant for the reaction CH₂(COOH)₂ + I₃^? ? CHI(COOH)₂ + 2I^? + H⁺, measured spectrophotometrically at 25°C and ionic strength 1.00M (NaClO₄), is (2.79 ± 0.48) × 10^?4M². Stopped-flow kinetic measurements at 25°C and ionic strength 1.00M with [H⁺] = (2.09-95.0) × 10^?3M and [I^?] = (1.23-26.1) × 10^?3M indicate that the rate of the forward reaction is given by (k₁[I₂] + k₃[I₃^?]) [HOOCCH₂COO^?] + (k₂[I₂] + k₄[I₃^?]) [CH(COOH)₂] + k₅[H⁺] [I₃^?] [CH₂(COOH)₂]. The values of the rate constants k₁-k₅ are (1.21 ± 0.31) × 10², (2.41 ± 0.15) × 10¹, (1.16 ± 0.33) × 10¹, (8.7 ± 4.5) × 10^?1M^?1·sec^?1, and (3.20 ± 0.56) × 10¹M^?2·sec^?1, respectively. The rate of enolization of malonic acid, measured by the bromine scavenging technique, is given by k_en[CH₂(COOH)₂], with k_en = 2.0 × 10^?3 + 1.0 × 10^?2 [CH₂(COOH)₂]. An intramolecular mechanism, featuring a six-member cyclic transition state, is postulated to account for the results on the enolization of malonic acid. The reactions of the enol, enolate ion, and protonated enol with iodine and/or triodide ion are proposed to account for the various rate terms.     

Pyrolytic production of Se (3P) from carbon diselenide. II. Rate of CSe2 decay

Pyrolytic decay of carbon diselenide was monitored by ultraviolet absorption spectroscopy in reflected shock waves in the temperature range of 1600–2600°K. The temperature dependence of the absorption coefficient of CSe₂ at 2308 Å was determined and was used to provide kinetic information along with a deconvolution procedure which accounted for and removed systematic distortions of the fast time-resolved absorbance profile. For temperatures of 1600–2600°K and argon densities of 1.5–7.0 × 10^?5 mol/cm³ dilute (1.0–9.0 × 10^?9 mol/cm³) CSe₂ pyrolyzed with measured first-order decay rates in the range of log₁₀ k₁ (sec^?1) = 3.0?5.7; at midrange (2100°K and 4.3 × 10^?5 mol/cm³ in Ar) k₁ ≈ 3 × 10⁴ sec^?1. The decay probably occurs via a unimolecular low-pressure process, first order in both CSe₂ and Ar, for which k₂ ± 10⁹ cm³/mol·sec at 2100°K. The deconvoluted data yield Arrhenius activation energies of 53.2 kcal/mol under second-order treatment, but the activation energy is less reliable than the general magnitude of the rate constant. A comparison of CSe₂ with other molecules which are isoelectronic in their valence shells (CO₂, CS₂, OCS, and N₂O) is made.     

Halide‐Anion Binding by Singly and Doubly N‐Confused Porphyrins

The halide‐binding properties of N‐confused porphyrin (NCP, 1 ) and doubly N‐confused porphyrins (trans‐N₂CP ( 2 ), cis‐N₂CP ( 3 )) were examined in CH₂Cl₂. In the free‐base forms, cis‐N₂CP ( 3 ) showed the highest affinity to each anion (Cl^?, Br^?, I^?) with association constants K_a=7.8×10³, 1.9×10³, and 5.8×10² M ^?1, respectively. As metal complexes, on the other hand, trans‐N₂CP 2–Cu exhibited the highest affinity to Cl^?, Br^?, and I^? with K_a=9.0×10⁴, 2.7×10⁴, and 1.9×10³ M ^?1, respectively. The corresponding K_a values for cis‐N₂CP 3–Cu and NCP 1–Cu were about 1/10 and 1/2, respectively, of those of 2–Cu . With the help of density functional theory (DFT) calculations and complementary affinity measurements of a series of trisubstituted N‐confused porphyrins, the efficient anion binding of NCPs was attributed to strong hydrogen bonding at the highly polarized NH moieties owing to the electron‐deficient C₆F₅ groups at meso positions as well as the ideally oriented dipole moments and large molecular polarizability. The orientation and magnitude of the dipole moments in NCPs were suggested to be important factors in the differentiation of the affinity for anions.     

Kinetics of the reactions of acenaphthene and acenaphthylene and structurally-related aromatic compounds with OH and NO3 radicals,N2O5 and O3 at 296 ± 2 K

The kinetics of the atmospherically important gas-phase reactions of acenaphthene and acenaphthylene with OH and NO₃ radicals, O₃ and N₂O₅ have been investigated at 296 ± 2 K. In addition, rate constants have been determined for the reactions of OH and NO₃ radicals with tetralin and styrene, and for the reactions of NO₃ radicals and/or N₂O₅ with naphthalene, 1- and 2-methylnaphthalene, 2,3-dimethylnaphthalene, toluene, toluene-α,α,α-d₃ and toluene-d₈. The rate constants obtained (in cm³ molecule^?1 s^?1 units) at 296 ± 2 K were: for the reactions of O₃; acenaphthene, <5 × 10^?19 and acenaphthylene, ca. 5.5 × 10^?16; for the OH radical reactions (determined using a relative rate method); acenaphthene, (1.03 ± 0.13) × 10^?10; acenaphthylene, (1.10 ± 0.11) × 10^?10; tetralin, (3.43 ± 0.06) × 10^?11 and styrene, (5.87 ± 0.15) × 10^?11; for the reactions of NO₃ (also determined using a relative rate method); acenaphthene, (4.6 ± 2.6) × 10^?13; acenaphthylene, (5.4 ± 0.8) × 10^?12; tetralin, (8.6 ± 1.3) × 10^?15; styrene, (1.51 ± 0.20) × 10^?13; toluene, (7.8 ± 1.5) × 10^?17; toluene-α,α,α-d₃, (3.8 ± 0.9) × 10^?17 and toluene-d₈, (3.4 ± 1.9) × 10^?17. The aromatic compounds which were observed to react with N₂O₅ and the rate constants derived were (in cm³ molecule^?1 s^?1 units): acenaphthene, 5.5 × 10^?17; naphthalene, 1.1 × 10^?17; 1-methylnaphthalene, 2.3 × 10^?17; 2-methylnaphthalene, 3.6 × 10^?17 and 2,3-dimethylnaphthalene, 5.3 × 10^?17. These data for naphthylene and the alkylnaphthalenes are in good agreement with our previous absolute and relative N₂O₅ reaction rate constants, and show that the NO₃ radical reactions with aromatic compounds proceed by overall H-atom abstraction from substituent-XH bonds (where X = C or O), or by NO₃ radical addition to unsaturated substituent groups while the N₂O₅ reactions only occur for aromatic compounds containing two or more fused six-membered aromatic rings.     

Temperature dependence of the reactions of HO2 with NO and NO2

Mixtures of N₂O, H₂, O₂, and trace amounts of NO and NO₂ were photolyzed at 213.9 nm, at 245°–328°K, and at about 1 atm total pressure (mostly H₂). HO₂ radicals are produced from the photolysis and they react as follows: Reaction (1b) is unimportant under all of our reaction conditions. Reaction (1a) was studied in competition with reaction (3) from which it was found that k_1a/k₃^1/2 = 6.4 × 10^?6 exp { z?(1400 ± 500)/RT} cm^3/2/sec^1/2. If k₃ is taken to be 3.3 × 10^?12 cm³/sec independent of temperature, k_1a = 1.2 × 10^?11 exp {?(1400 ± 500)/RT} cm³/sec. Reaction (2a) is negligible compared to reaction (2b) under all of our reaction conditions. The ratio k_2b/k₁ = 0.61 ± 0.15 at 245°K. Using the Arrhenius expression for k_1a given above leads to k_2b = 4.2 × 10^?13 cm³/sec, which is assumed to be independent of temperature. The intermediate HO₂NO₂ is unstable and induces the dark oxidation of NO through reaction (?2b), which was found to have a rate coefficient k_?2b = 6 × 10¹⁷ exp {?26,000/RT} sec^?1 based on the value of k_1a given above. The intermediate can also decompose via Reaction (10b) is at least partially heterogeneous.     

Kinetic Studies on the Oxidation of Germanium(II) with Chlorate by Polarographic Analysis

The rate of oxidation of Ge(II) chloride by large excess of ClO₂^? ions in HCl, NaCl and Na₂SO₄ mixed solutions was polarographically observed at various H₂O⁺ and Cl^? ion concentrations. The observed rate constant, k_obs, is expressed by k_o=K_obs/(ClO₃^?)={k₁,(H⁺)+k₂K₁(Cl^?)²+ K₃K₂(SO₄^2?)} (H⁺)/{(H⁺)¹+K₁(Cl^-)2 +K₂(SO₄^2?)} for the following reaction processes, The values were obtained aa k₁=1.5410^-3liter² mole^2? sec^-1, k₂=5.00×10^-2liter² mole^2? sec^-2 and k₂=4.30×10^-3liter² mole^2? sec^-2, K₁=1.80× 10^-2, K₂= 2.43×10^-2 mole liter^-1 at constant ionic strength I=0.50 M at 30°C.     

Decomposition of chemically activated ethyltrimethylgermane the arrhenius A-factors for rupture of group IVA—methyl bonds

The decomposition rate of chemically activated ethyltrimethylgermane from the reaction ¹CH₂ + (CH₃)₄Ge, where ¹CH₂ was produced from diazomethane photolysis at 3660 Å, is 8.6 × 10⁵ sec^?1. This result combined with RRKM theory and critical energy estimates yields an Arrhenius A factor of log[A (sec^?1)/methyl] = 14.7 ± 0.8 for methyl rupture from germanium. Log A values for methyl rupture from carbon, silicon, and germanium linearly correlate with the vibrational-rotational entropies of the corresponding tetramethyls. Extrapolation predicts log[A (sec^?1)/methyl] = 14.4 and 14.3 for methyl rupture from tin and lead, respectively.     

Magnesium chloride supported high-mileage catalysts for olefin polymerization. X. Effect of hydrogen and catalytic site deactivation

The effect of H₂ on propylene polymerization initiated by a MgCl₂/EB/PC/AlEt₃/TiCl₄–3 AlEt₃/MPT catalyst was studied. Hydrogen increases significantly the initial rate during the early stage of the polymerization to give a higher yield of polymer than reactions without H₂. But H₂ reduces the yield toward the latter stages so that the net effect on the total yield can be quite small. There is no appreciable effect of H₂ on either the isotacticity index or polydispersity of the products. It decreases molecular weight proportional to (p_H2)^1/2. The chain transfer by H₂ resulted in a decrease of total metal polymer bond concentration with time of polymerization. The rate constants of hydrogen chain transfer for the two kinds of isospecific and nonspecific sites are = 5.1 × 10^?3, = 2.7 × 10^?3, = 7.5 × 10^?3, = 4.4 × 10^?3, in units of torr^1/2 sec^?1 at 50°. Hydrogen assists in the deactivation of the catalytic sites as does propylene; rates of the former and the latter vary with (p_H2)^1/2 and [C₃H₆]^1/2, respectively, with k = (12.1 ± 0.9) M^?1 torr^?1/2 sec^?1 and k = (65.3 ± 3.3) M^?3/2 sec^?1 at 50° and A/T = 167. The mechanism for deactivation of catalytic sites are discussed.     

Substitution and Isomerization of Nitrite Ion at a Cobalt(III) Centre Having a Coordinated Pentadentate Ligand with Two Nitrogen and Three Sulfur Donor Atoms

The influence of placing thioether linkages trans to a site of nitrito substitution and spontaneous nitrito-tonitro isomerization is reported for the [CoQS(H₂O)]³⁺ cation where QS is 1,11-diamino-3,6,9-trithiaundecane. Preparation and characterization is described for the aqua and nitrito complexes. Rate data for the substitution process is presented at 17.7, 25.0 and 35.0°C. It is consistent with the mechanism first proposed by Basolo and Pearson in which N₂O₃ is the nitrosation agent. [CoQS(H₂O)]³⁺ is three hundred times more reactive than [Co(NH₃)₅H₂O]³⁺ under identical conditions. Isomerization is dramatically slower than the conversion of [CoQS(H₂O)³⁺ to [CoQS(ONO)]²⁺. The isomerization process was studied at 5 wavelengths, 3 temperatures and various conditions of acid and nitrite ion at an ionic strength of 0.11–0.60 M. Studies at 25°C give k_isom = 1.21 ± 0.12 × 10^?4 sec ^?1. Similar determinations at 17.7 and 35.0°C give k_isom = 3.84 ± 0.65 × 10^?5 sec^?1 and 3.59 ± 0.13 × 10^?4 sec^?1 respectively. The thermodynamic activation parameters ΔH^≠, ΔG^≠, and ΔS^≠ obtained from an Eyring plot gives ΔH^≠ = 111.3 kJ/mol, ΔS^≠ = + 53 J/molK and ΔG^≠ = 95.4 kJ/mol. These results are discussed in the context of present knowledge and experience with other cobalt(III) ligand systems.     

Anodic Deposition of Iodide Ion at Silver Electrode

Anodic deposition of iodide ion on silver at 25° in aqueous (0.5 M KNO₃) and in 90% (w/w) ethanol-water (0.05 M KClO₄) solutions was studied galvanostatically. The exchange current density, transfer coefficient and the rate constants for the electrode reaction were evaluated. The experimental results revealed that the overall electrode reaction and the charge-transfer step was the same one, i.e., , which might be assumed highly reversible as reflected by the exchange current density (i) and transfer coefficient (α). The numerical values of the rate constants, and at 25° were, in aqueous solution, 1.02×10^?5 and 2.88×10^?6, and in ethanol solution, 2.88×10^?5 and 6.3×10^?6 cm sec^?1, respectively.     

The very-low-pressure pyrolysis (VLPP) of n-propyl nitrate,tert-butyl nitrite,and methyl nitrite. Rate constants for some alkoxy radical reactions

The pyrolysis of n-propyl nitrate and tert-butyl nitrite at very low pressures (VLPP technique) is reported. For the reaction the high-pressure rate expression at 300°K, log k₁ (sec^?1) = 16.5 ? 40.0 kcal/mole/2.3 RT, is derived. The reaction was studied and the high-pressure parameters at 300°K are log k₂(sec^?1) = 15.8 ? 39.3 kcal/mole/2.3 RT. From ΔS_1,?1⁰ and ΔS_2,?2⁰ and the assumption E_?1 and E_?2 ? 0, we derive log k_?1(M^?1·sec^?1) (300°K) = 9.5 and log k_?2 (M^?1·sec^?1) (300°K) = 9.8. In contrast, the pyrolysis of methyl nitrite and methyl d₃ nitrite afford NO and HNO and DNO, respectively, in what appears to be a heterogeneous process. The values of k_?1 and k_?2 in conjunction with independent measurements imply a value at 300°K for of 3.5 × 10⁵ M^?1·sec^?1, which is two orders of magnitude greater than currently accepted values. In the high-pressure static pyrolysis of dimethyl peroxide in the presence of NO₂, the yield of methyl nitrate indicates that the combination of methoxy radicals with NO₂ is in the high-pressure limit at atmospheric pressure.     

The relaxation spectra of nickel(II) and cobalt(II) arginine complexes

The temperature-jump method has been used to determine the nickel(II)- and cobalt(II)-arginine complexation kinetics. In the pH range studied, the neutral form of the ligand, HL, is the attacking, as well as the complexed, ligand species. The reactions reported on are of the type where n = 1, 2, 3 and M is Ni or Co. At 25° and ionic strength 0.1M the association rate constants are: for nickel(II) k₁ = 2.3 × 10³(±20%), k₂ = 2.4 × 10⁴(±20%), k₃ = 3.5 × 10⁴(±40%) M^?1 sec^?1; for cobalt(II) k₁ = 1.5 × 10⁵(±20%), k₂ = 8.7 × 10⁵(±20%), k₃ = 2.0 × 10⁵(±40%) M^?1 sec^?1. Arginine binds to metal ions less well than homologous chelating agents due to the electrostatic repulsion arising from the positively charged terminus of the zwitterion. Kinetically, the effect appears in the association rate constants with nickel reactions more strongly influenced than cobalt.     

A sensitive method for simultaneous determination of four macrolides by CE with electrochemiluminescence detection and its applications in human urine and tablets

A sensitive method for simultaneous determination of azithromycin (AZI), acetylspiramycin (ACE), erythromycin (ERY), and josamycin (JOS) was developed by CE coupled with electrochemiluminescence detection with Ru(bpy)₃²⁺. The parameters related to separation and detection were investigated in detail. The four macrolides were well separated and detected within 6 min under the optimized conditions. The LOD (S/N=3) of AZI, ACE, ERY, and JOS were 1.2×10^?9, 7.1×10^?9, 3.9×10^?8 and 9.5×10^?8 mol/L, respectively. The LOQ (S/N=10) of AZI, ACE, ERY, and JOS in human urine were 8.2×10^?8, 2.5×10^?7, 8.9×10^?7 and 1.2×10^?6 mol/L, respectively. The recoveries of the four macrolides in human urine and pharmaceutical tablet samples were 85.0–104.0% at different concentration levels.     

Thermal Studies of New Lead(II) Coated‐Wire Membrane Electrodes

Five plastic membrane Pb²⁺‐selective electrodes were prepared based on 1,4‐bis(N‐tosyl‐o‐aminophenoxy)butane I , 1,4‐bis(N‐allyl‐N‐tosyl‐o‐aminophenoxy)butane II , 1,4‐bis(N‐benzyl‐N‐tosyl‐o‐aminophenoxy)butane III , 1,4‐bis[N‐(o‐allyloxybenzyl)‐N‐tosyl‐o‐aminophenoxy]butane IV , and 1,4‐bis(N‐octyl‐N‐tosyl‐o‐aminophenoxy)butane V as neutral carriers. The electrodes exhibited nearly Nernstian responses over the concentration ranges, 2.5×10^?4–4.0×10^?2, 2.5×10^?5–4.0×10^?2, 7.9×10^?5–4.0×10^?2, 2.2×10^?5–4.0×10^?2, and 1.9×10^?4–4.0×10^?2 M for electrodes composed with the ionophores I–V , respectively. All electrodes showed pH range of about 4.0 to 11.5 and working temperature range of 22 to 70 °C with isothermal temperature coefficients of 1.19×10^?3, 1.16×10^?3, 1.16×10^?3, 1.00×10^?3 , and 1.32×10^?3 V/°C for electrodes I–V respectively.