甲苯-2,4-二异氰酸酯与仲胺类化合物反应中的质子转移过程

采用密度泛函理论B3LYP/6-31+G(d,p)方法研究了甲苯-2,4-二异氰酸酯(2,4-TDI)与仲胺类化合物反应过程中的质子转移效应. 研究发现甲醇分子对反应有显著的催化效应,可使反应能垒大幅降低,这表明含活泼氢的化合物会加速质子转移过程,从而加快反应速率. 2,4-TDI与甲基-N-甲基氨基甲酸酯的催化加成反应为一步反应,其反应过渡态呈六元环结构;而2,4-TDI与N-甲基对硝基苯胺、二苯胺、1,2-二氢-2,2,4-三甲基喹啉等芳香胺类化合物的催化加成反应经历了两步反应,其中第一步为速率控制步骤. 研究表明,在与2,4-TDI的反应中,芳胺化合物的活性高于甲基-N-甲基氨基甲酸酯的活性,计算的反应活性顺序与实验结果一致.     

甲苯-2,4-二异氰酸酯与仲胺类化合物反应中的质子转移过程(英文)

采用密度泛函理论B3LYP/6-31+G(d,p)方法研究了甲苯-2,4-二异氰酸酯(2,4-TDI)与仲胺类化合物反应过程中的质子转移效应.研究发现甲醇分子对反应有显著的催化效应,可使反应能垒大幅降低,这表明含活泼氢的化合物会加速质子转移过程,从而加快反应速率.2,4-TDI与甲基-N-甲基氨基甲酸酯的催化加成反应为一步反应,其反应过渡态呈六元环结构;而2,4-TDI与N-甲基对硝基苯胺、二苯胺、1,2-二氢-2,2,4-三甲基喹啉等芳香胺类化合物的催化加成反应经历了两步反应,其中第一步为速率控制步骤.研究表明,在与2,4-TDI的反应中,芳胺化合物的活性高于甲基-N-甲基氨基甲酸酯的活性,计算的反应活性顺序与实验结果一致.     

含混杂活性端基新型多官能团齐聚物的结构与性能

通过控制4,4'-二氨基二苯甲烷环氧树脂(TGDDM)和丙烯酸(AA)的摩尔比(1∶2)合成了化学共混的含混杂活性端基的多官能团齐聚物MVEO-2,直接将多官能团环氧树脂TGDDM与多官能团环氧乙烯基树脂MVER通过物理共混得到聚合物共混物MVEOmix.研究了化学共混和物理共混对含混杂活性端基多官能团齐聚物的结构、性能和形态的影响.红外光谱(FTIR)和核磁共振谱(1H NMR)表明,MVEO-2和MVEOmix具有相同的结构组成.凝胶渗透色谱(GPC)分析表明MVEOmix具有双峰结构且分子量分布较窄,而MVEO-2具有多峰结构且分子量分布较宽.热重分析(TGA)和动态热机械分析(DMA)表明,MVEO-2的热稳定性比MVEOmix更高.MVEO-2的强度和韧性比MVEOmix明显提高,弯曲强度提高17%,拉伸强度提高38%,断裂伸长率提高35%,冲击强度提高24%.扫描电镜结果表明化学共混形成了更均匀紧密的互穿聚合物网络结构.     

漆酚基环氧丙烯酸酯的合成

以漆酚、环氧氯丙烷、丙烯酸为主要原料,通过两步反应合成了漆酚基环氧丙烯酸酯,其结构经IR表征。较适宜的反应条件为:漆酚基环氧树脂(UE)50mmol,n(UE中的环氧基团)∶n(丙烯酸)=1.00∶0.75,w(三乙胺)=2%,于80℃反应3h,丙烯酸的转化率在94%以上。该反应为一级反应,表观活化能52.7kJ.mol-1,频率因子1.719×104s-1。     

聚酚酞醚砜-聚硅氧烷-聚醚氨酯多嵌段聚合物

<正> 合成了端异氰酸酯基聚硅氧烷-聚醚氨酯嵌段预聚物和端羟基酚酞醚砜齐聚物,探索了上述预聚物与齐聚物间的活泼氢转移加成反应,对所得的多嵌段聚合物做了初步的结构形态表征。 试验用单体:酚酞、4,4′-二氯二苯砜、TDL_(2,4)、MDI、低分子量聚氧化丙烯二醇N-     

一种非离子型含氟聚氨酯表面活性剂的合成及性能

以甲苯-2,4-二异氰酸酯(2,4-TDI)、2-甲氧基-3-全氟壬烯氧基丙醇和聚乙二醇(PEG)等为主要原料,通过分布缩合得到一种非离子型含氟聚氨酯表面活性剂,并利用红外光谱对其进行了表征。讨论了加料方式、亲水单体相对分子质量、聚乙二醇用量等因素对产品性能的影响。实验结果表明,当n(2,4-TDI):n(氟醇):n(PEG)=1:1:1.1时,采用先加入TDI和氟醇,反应一段时间后滴加PEG的加料方式,能够合成得到综合性能较好的非离子型含氟聚氨酯表面活性剂。对该表面活性剂在水相中的表面活性进行了测试,所制得的非离子型含氟聚氨酯表面活性剂(FPU-1)的相对分子质量为1310,其临界胶束浓度约为9.54×10-5mol/L,水溶液的最低表面张力为20.88mN/m。     

丙烯酸树脂／蒙脱土纳米复合材料的制备研究

采用离子交换法,用十六烷基三甲基溴化铵对钠基蒙脱土(Na-MMT)进行改性制备了有机蒙脱土(OMMT).用丙烯酸(AA)、硫酸化蓖麻油、乳化剂OP-10、过硫酸钾为原料进行水溶液聚合制得丙烯酸树脂.将丙烯酸树脂与改性蒙脱土通过聚合插层制备了丙烯酸树脂/ 蒙脱土纳米复合材料.通过傅立叶变换红外(FTIR)和X-射线衍射 (XRD)等手段对复合材料的结构进行了表征,结果表明:丙烯酸树脂插层进入有机蒙脱土内可形成插层型或剥离型的纳米复合材料.蒙脱土含量及蒙脱土与丙烯酸树脂的反应温度、反应时间均对复合材料的剥离行为产生影响,在蒙脱土含量为树脂固含量的7%、温度为70℃、反应4h的条件下可得到完全剥离的纳米复合材料.     

硝酸咪康唑的合成工艺改进

2,4-二氯-α-氯代苯乙酮(1)与咪唑进行N-烷基化反应制得α-(1-咪唑基)-2,4-二氯苯乙酮(2);2经硼氢化钾还原得α-(1-咪唑基)-2,4-二氯苯基乙醇硼络合物(3);3直接与2,4-二氯氯苄进行O-烷基化反应合成了硝酸咪康唑(4). 2和4的结构经1H NMR, 13C NMR, IR和MS表征.用正交试验优化了合成2的工艺条件.在最佳反应条件[1＝50 mmol, n(1) ∶ n(咪唑) ∶ n(三乙胺)=1.0 ∶ 1.2 ∶ 1.2,以苯为溶剂,于70 ℃反应1.5 h]下,2的收率达90.4%.4的总收率为68.2%.     

不同端基联苯型聚醚醚酮(PEDEK)齐聚物的合成

采取亲核取代反应合成了含有羟端基和不含羟端基的两种线性联苯型聚醚醚酮(PEDEK)齐聚物,并采用MS,¹HNMR,ICP,IR,DSC和WAXD等方法对齐聚物进行表征.研究发现,含羟端基的齐聚物因分子间存在氢键,其X射线衍射峰峰位和峰形与聚合物十分相似,而不含羟端基齐聚物的X射线衍射峰与聚合物相差较大.     

聚合物基板表面状态对异相接枝的影响研究

研究了对于羟丙基纤维素（HPC）基板进行表面修饰时,基板表面状态的调控 对基板表面化学接枝的影响。用双官能团化合物2,4-甲苯二异氰酸酯（TDI）作为 接枝桥梁,其对位的异氰酸酯基先和基板上的羟基反应,保留的邻位异氰酸酯基进 一步再与丙烯酸的羟基反应,让接枝在基板上的活性丙烯酸分子继续和丙烯酸溶液 聚合,通过这种途径在基板表面修饰聚丙烯酸。基板制备时,由于不同介质对HPC 基板表面的不同诱导作用,导致表面组成各异,大大影响了接枝反应的效果。红外 光谱和二次离子飞行时间质谱均证明了可以用2,4-甲苯-二异氰酸酯（TDI）分子 做接枝桥梁在基板表面异相接枝上羟基并进一步接枝聚丙烯酸,从而达到修饰基板 的目的。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.