Preparation and properties of aromatic polyamides and copolyamides from phenylindanedicarboxylic acid and aromatic diamines

Aromatic polyamides (aramids) having inherent viscosities of 0.5–1.10 dL/g were prepared by the direct polycondensation of 1,1,3-trimethyl-3-(4-carboxyphenyl)indane-5-carboxylic acid with various aromatic diamines using triphenyl phosphite and pyridine as the condensing agents. Copolyamides were also prepared by a similar procedure from a mixture of the phenylindane diacid, terephthalic acid, and p-phenylenediamine. Almost all of the aramids were soluble in a variety of solvents such as N-methyl-2-pyrrolidone, pyridine, and m-cresol, and afforded transparent and tough films by the solution casting. These aramids and copolyamides had glass transition temperatures in the range of 290–355°C, and started to lose weight at 340°C in air.     

Preparation and properties of fluorine-containing aromatic polyamides from tetrafluorophthaloyl chlorides and aromatic diamines

New fluorine-containing aromatic polyamides with inherent viscosities of 0.4–1.8 dL/g were prepared by the low temperature solution polycondensation of tetrafluoroisophthaloyl and tetrafluoroterephthaloyl chlorides with N,N′-bis(trimethylsilyl)-substituted aromatic diamines. The aromatic polyperfluoroisophthalamides were amorphous polymers with glass transition temperatures around 280°C, whereas the polyperfluoroterephthalamides were crystalline. Most of these aromatic polyamides were soluble in organic solvents, and began to decompose around 330°C in air or nitrogen atmosphere.     

Preparation and properties of aromatic polyamides from 1,4-bis(p-carboxyphenoxy)naphthyl and aromatic diamines

A new aromatic dicarboxylic acid, 1,4-bis (p-carboxyphenoxy)naphthyl ( 3 ), was synthesized by the reaction of p-fluorobenzonitrile with 1,4-naphthalenediol, followed by hydrolysis. Aromatic polyamides having inherent viscosities of 1.27–2.22 dL/g were prepared by the triphenyl phosphite activated polycondensation of diacid 3 with various aromatic diamines. Most of the resulting polymers showed an amorphous nature and were readily soluble in a variety of organic solvents including N,N-dimethyl-acetamide (DMAc), N-methyl-2-pyrrolidone (NMP), and m-cresol. Transparent, tough, and flexible films of these polymers could be cast from the DMAc or NMP solutions. The cast films had tensile strengths ranging from 64–104 MPa, elongations-at-break from 6 to 10%, and initial moduli from 1.52 to 2.14 GPa. These polyamides had glass transition temperatures in the range of 195 to 240°C. Almost all polymers were thermally stable up to 400°C, with 10% weight loss being recorded above 480°C in air and nitrogen atmospheres. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2273–2280, 1997     

Synthesis and properties of polyamides from 2,5-furandicarboxylic acid and aromatic and aliphatic diamines

Russian Chemical Bulletin - Polyamides based on the 5-hydroxymethylfurfural derivative (2,5-furandicarboxylic acid dichloroanhydride) and diamines of both aromatic and aliphatic series were...     

Preparation and properties of polyamides from 2,2′-p-phenylenebis-5-oxazolones with diamines

Novel phenylated polyamides having inherent viscosities in the range of 0.2–0.4 were prepared by the ring-opening polyaddition of 2,2′-p-phenylenebis(4,4-diphenyl-5-oxazolone) with aliphatic diamines in polar aprotic solvents. Similarly, unsubstituted polyamides were obtained from 2,2′-p-phenylenebis-5-oxazolone and both aliphatic and aromatic diamines. The phenylated polyamides were highly soluble in a wide range of solvents including tetrahydrofuran and dioxane, while the unsubstituted polymers showed limited solubility in the solvents. No marked differences in thermal stability between the phenylated and unsubstituted polyamides were noted, and all the polyamides began to decompose at around 250°C in both air and nitrogen.     

Preparation and properties of aromatic polymides from 2,2′-bibenzoic acid and aromatic diamines

Aromatic polyamides having inherent viscosities up to 1.8 dL/g were synthesized either by the direct polycondensation of 2,2′-bibenzoic acid with various aromatic diamines or by the low temperature solution polycondensation of 2,2′-bibenzoyl chloride with aromatic diamines. All the aromatic polyamides were amorphous and soluble in a variety of organic solvents including N,N-dimethylacetamide (DMAc), N-methyl-2-pyrrolidone, dimethyl sulfoxide, m-cresol, and pyridine. Transparent and flexible films of these polymers could be cast from the DMAc solutions. These aromatic polymides had glass transition temperatures in the range of 226-306deg;C and began to lose weight around 350°C in air.     

Preparation and properties of thermally stable polyimides derived from asymmetric trifluoromethylated aromatic diamines and various dianhydrides

A novel method for the preparation of an asymmetric fluorinated aromatic diamine, 3,4′-bis(4-amino-2-trifluoromethylphenoxy)-benzophenone was investigated. This new diamine containing trifluoromethyl side group was synthesized from the nucleophilic substitution reaction of 2-chloro-5-nitrobenzotrifluoride and 3,4′-dihydroxybenzo phenone in the presence of potassium carbonate, followed by catalytic reduction with SnCl₂·6H₂O and concentrated hydrochloric acid. This novel diamine was used to react with different commercially available aromatic tetracarboxylic dianhydrides to prepare polyimides via thermal or chemical imidization. The polyimide properties such as inherent viscosity, solubility, thermal and surface properties were investigated to illustrate the contribution of the trifluoromethyl group and the asymmetry structure of the polyimide. The polyimides obtained had good thermal stability and the glass transition temperature values ranged from 225 to 267 °C. All of these novel polyimides held 10% weight loss at the temperature above 543 °C in air and left more than 47% residue even at 800 °C in nitrogen. The inherent viscosities of the obtained polyimides were above 0.73 dL/g and were easily dissolved in both polar, aprotic solvents and some low-boiling-point solvents. Moreover, these PI films had dielectric constants of 2.94-3.53 (1 kHz), with moisture absorption in the range of 0.07-0.34 wt%. In comparison of the PIs (5) series with the analogous symmetric PIs (6) series based on 4,4′-bis(4-amino-2-trifluoromethylphenoxy)-benzophenone, the (5) series revealed better solubility, low dielectric constant and moisture absorption.     

Microwave-assisted clean synthesis of aromatic photoactive polyamides derived from 5-(3-acetoxynaphthoylamino)-isophthalic acid and aromatic diamines in ionic liquid

Dicarboxylic acid, 5-(3-acetoxynaphthoylamino)isophthalic acid was prepared in three steps. The direct polycondensation of this novel diacid with several aromatic diamines was studied in 1,3-diisopropylimidazolium bromide as an ionic liquid (IL) under microwave irradiation and conventional heating. The polymerization reaction was effectively preceded in IL, and triphenyl phosphite as an activating agent, and the resulting novel photoactive polyamides were obtained in high yields and moderate inherent viscosities in the range of 0.44-0.69 dL/g. Thermogravimetric analysis showed that polymers are thermally stable, 10% weight loss temperatures in excess of 390 and 470 °C, and char yields at 600 °C in nitrogen higher than 60%. These macromolecules exhibited maximum UV-vis absorption at 265 and 300 nm in N,N-dimethylformamide (DMF) solution. Their photoluminescence in DMF solution demonstrated fluorescence emission maxima around 361 and 427 nm for all of the polyamides. It is very important to note that, because of, high polarizability of ILs, they are very good solvents for absorbing microwaves.     

Novel soluble fluorinated aromatic polyamides derived from 2-(4-trifluoromethylphenoxy)terephthaloyl chloride with various aromatic diamines

A series of novel fluorinated aromatic polyamides derived from a new monomer, 2-(4-trifluoromethylphenoxy)terephthaloyl chloride (TFTPC), with various aromatic diamines were synthesized and characterized. The polyamides were obtained in high yields and moderately high inherent viscosities ranging from 1.07 to 1.16 dL/g. All the polyamides were amorphous and readily soluble in many organic solvents, such as N-methyl-2-pyrrolidinone (NMP), N,N′-dimethylacetamide (DMAc), N,N′-dimethylformamide (DMF) and dimethyl sulfoxide (DMSO), and could afford flexible and tough films via solution casting. The cast films exhibited good mechanical properties with tensile strengths of 82.8-107.3 MPa, elongation at break of 4.1-7.2%, and tensile modulus of 2.26-3.95 GPa. These polyamide films also exhibited good thermal stability with the glass transition temperature of 222-294 °C, the temperature at 5% weight loss of 442-472 °C in nitrogen. They exhibited low dielectric constants ranging from 3.25 to 3.39 (1 MHz), low moisture absorption in the range of 1.32-2.45%, high transparency with an ultraviolet-visible absorption cut-off wavelength in the 330-371 nm range, and excellent electrical properties.     

Aromatic polyamides. V. A general synthesis of polyamides from aromatic diacids and aromatic diamines in sulfur trioxide

The reaction of terephthalic acid (TA) and para-phenylenediamine sulfate (PPD-S) in sulfur trioxide to form anisotropic, sulfonated poly(p-phenyleneterephthalamide) (SPT) dopes was reported in Part IV of this series. We have found now that the TA/PPD-S polymerization is only one example of a more general polyamide condensation reaction of aromatic diamines and aromatic diacids. Sulfonation of the aromatic diamine ring during TA/PPD-S polymerization in SO₃ was a major side reaction. Sulfonation was reduced or eliminated by aromatic diamine ring substitution with unreactive substituents, particularly chlorine and fluorine. Polymerization of 2,3,5,6-tetrafluoro-phenylenediamine with TA in SO₃ at 80°C (18% concentration) produced unsulfonated poly(tetrafluoro-para-phenyleneterephthalamide) (F-PPT) with an inherent viscosity of 2.2. The halogenated, all-para aromatic polymers formed highly anisotropic (liquid crystalline) dopes. Monomers that formed polymers in which the chain bond angle deviated from 180° (e.g., meta-oriented monomers) yielded only isotropic polymer solutions. The mechanism and rate of diamine–diacid reactivity in SO₃ was related to diamine basicity. Whereas the less basic aromatic diamines (as sulfates) polymerized with aromatic diacids in SO₃, the more basic aliphatic diamines (as sulfates) would not. Aliphatic, cycloaliphatic, and aryl-aliphatic diacids were degraded by or reacted with the solvent (SO₃). Thermogravimetric analyses of F-PPT and monosulfonated poly(chloro-para-phenyleneterephthalamide) at 20°C/min showed weight loss only above 380 and 370°C, respectively.     

Stereoregular polyamides derived from methylene-L-tartaric acid and aliphatic diamines

Stereoregular polyamides containing two chiral backbone carbons in the repeating unit were prepared by polycondensation of bis(pentachlorophenyl) 2,3-O-methylene-L -tartrate with 1,9 and 1,12-alcanediamines activated as N,N′-bis(trimethylsilyl) derivatives. The polymers were characterized by elemental analysis, IR, and ¹H-NMR spectroscopy, and differential scanning calorimetry. Both viscosimetry and GPC were used to estimate the molecular weights which ranged between 6000 and 44000. These polytartaramides were readily soluble in chloroform, displayed moderate optical activity in solution, and formed highly crystalline films.     

Synthesis and characterization of novel aromatic polyamides derived from two heterocyclic diamines

Two diamines were synthesized as new aromatic monomers. A series of novel aromatic polyamides (aramids) were also synthesized by direct and indirect polycondensation of these diamines with various aromatic dicarboxylic acids. These aramids have inherent viscosities of 0.43-0.84 dl/g and were obtained in quantitative yield.     

Synthesis and characterization of silicon-containing polyamides from aromatic sulfone ether diamines and aromatic organosilicon diacid chlorides

New polymides and copolyamides containing silicon and sulfone ether linkages, soluble in common aprotic solvents and having inherent viscosities of 0.3–0.6 dL/g have been synthesized by solution condensation of bis-(4-chlorocarbonyl phenyl) dimethylsilance (DMSC) and/or bis-(4-chlorocarbonyl phenyl) diphenylsilance (DPSC) with 4,4′-[sulfonylbis-(4,1-phenylenoxy)] bisbenzenamine, 3,3′-[sulfonylbis (4,1-phenyleneoxy)] bisbenzenamine, and bis (4-aminophenyl) ether. These polymers were characterized by infrared spectra, solution viscosity, thermooxidative degradation, differential scanning calorimetry, and x-ray diffraction. These polymers show good thermal stability.     

Preparation and properties of polyamides from 2,8-phenoxathiin-bis-(γ-ketobutyric acid), 2,7-thianthrene-bis(γ-ketobutyric acid), and aromatic diamines

Aromatic-aliphatic polyamides containing phenoxathiin and thianthrene heterocyclic units were prepared by the direct polycondensation of 2,8-phenoxathiin-bis(γ-ketobutyric acid) ( I ) or 2,7-thianthrene-bis(γ-ketobutyric acid) (II) with various aromatic diamines in a triphenylphosphite-pyridine system. Prior to polymer synthesis two model diamides were prepared by condensing γ-keto acid I or II with p-toluidine. The model diamides and polyamides were characterized by spectral methods and elemental analysis. The polyamides, obtained in 56–90% yields, had inherent viscosities in the 0.82–1.1 dL/g range in concentrated H₂SO₄ at 30°C. The effect of heterocyclic units on polymer properties, such as solubility, crystallinity, and thermal stability has been discussed.     

Synthesis and characterization of new soluble aromatic polyamides from diaminotetraphenylimidazolin-2-one and various aromatic dicarboxylic acid chlorides

Novel aromatic polyamides, having inherent viscosities of 0.76-2.31 dL/g, were synthesized by the low temperature solution polycondensation of a new highly phenylated diamine monomer having an imidazolinone group, 1,3-bis(4-aminophenyl)-4,5-diphenylimidazoline-2-one (TPIDA), with various aromatic diacid chlorides. All the polymers were amorphous, and most of the polyamides were readily soluble in organic solvents such as N-methyl–2-pyrrolidone, N,N-dimethylacetamide (DMAc), and m-cresol. Flexible and tough films could be prepared from the DMAc solutions of these soluble aromatic polyamides. The glass transition temperatures and 10% weight loss temperatures under nitrogen of the polyamides were in the range of 275–315°C and 430–505°C, respectively. © 1995 John Wiley & Sons, Inc.     

Preparation of polyimides from pyromellitic dithioanhydride and aromatic diamines

The reaction of phthalic thioanhydride and aniline yielded N-phenylphthalimide quite readily. The reaction was strongly dependent on solvent and temperature. Various additives tried as a reaction promoter were almost ineffective. By the extension of the model reaction, polyimides were prepared in a simple one-step synthesis from pyromellitic dithioanhydride and aromatic diamines in dimethylacetamide or other solvents. Polymers with inherent viscosity up to 0.3 in concentrated sulfuric acid were obtained in approximately quantitative yield.     

Synthesis of aromatic polyamides by 1-hydroxybenzotriazole-catalyzed polycondensation of active aromatic diesters with aromatic diamines

Catalytic actions of various additives were studied in the polycondensation of di(4-nitrophenyl) isophthalate with bis(4-aminophenyl) ether in N-methyl-2-pyrrolidone, and 1-hydroxybenzotriazole (HOBt) was found to be a highly effective catalyst that yielded high-molecular-weight polyamide. In addition to the polycondensation of the 4-nitrophenyl ester, the polymerization of negatively substituted phenyl esters like di(2,4,5-trichlorophenyl) isophthalate was also accelerated by HOBt. For the HOBt-catalyzed aminolysis of esters a bifunctional concerted mechanism that involves an eight-membered transition state was proposed.     

Preparation and properties of N-phenylated aromatic polyamides from N,N′-diphenyl-p-phenylenediamine and aromatic diacid chlorides

N-Phenylated aromatic polyamides and copolyamides derived from N,N′-diphenyl-p-phenylenediamine, isophthaloyl, and terephthaloyl chloride were prepared by high-temperature solution polycondensation in anisole at 155°C. Factors that influenced the reaction, such as monomer concentration, solvent, temperature, and time, were studied to determine the optimum conditions for the preparation of high molecular weight polymers. Compared with analogous unsubstituted aromatic polyamides, the N-phenylated polymers exhibited better solubility in chlorinated and amide solvents, reduced crystallinity, and lower glass transition temperatures (above 200°C). All polymers except the polyterephthalamide could be solvent-cast, as well as hot-pressed, into transparent flexible films.