Preconcentration and dansylation of aliphatic amines using C18 solid-phase packings. Application to the screening analysis in environmental water samples

Precolumn preconcentration and derivatization on solid sorbents (Bond Elut C18 solid-phase extraction cartridges) of low-molecular-mass aliphatic amines in water samples have been performed using dansyl chloride (Dns-Cl) as derivatization reagent. Conditions for analyte preconcentration and derivatization such as volume sample, reagent concentration, time, pH and temperature reaction were optimised. On the basis of these studies a rapid and sensitive method for screening of aliphatic amines in waters is presented. Up to volumes of 5 ml, samples are drawn through the sorbent, the analytes retained are dansylated at basic pH, at 100 degrees C for 10 min or 85 degrees C for 15 min. The derivatized analytes are desorbed with 0.5 ml of acetonitrile. Twenty microl of the collected extracts are chromatographed in a Hypersyl ODS C18 column using an acetonitrile-imidazole (pH 7) gradient for elution. Seven amines and ammonium were separated within 9 min. The Dns derivatives were monitored at 333 nm with UV detection and at lambda(excitation) = 350 nm and lambda(emission) = 530 nm with fluorescence detection. The different signals are compared. Dynamic ranges from 10 to 250 microg/l and limits of detection at the microgram-per-litre level and relative standard deviations from 2 to 15% were obtained for all the amines. The total analysis time (sample treatment plus chromatography) was less than 25 min. The method was applied to determination and screening analysis of these analytes in real environmental water samples.     

Fluorescence Probe of 10-Phenyl-acridone-2-sulfonyl Chloride and Its Application for Determination of Free Aliphatic Amines in Environmental Samples by HPLC with Fluorescence Detection and APCI-MS

A simple and sensitive method for the determination of free aliphatic amines using 10-phenyl-acridone-2-sulfonyl chloride (PASC) as a labeling reagent by high-performance liquid chromatography with fluorescence detection and online mass spectrometry identification (HPLC-FLD-MS) has been developed. Derivatization conditions including reagent concentration, buffer pH, reaction time and temperature were optimized. PASC reacted with aliphatic amines at 50 °C for 4 min in aqueous acetonitrile (ACN) in the presence of sodiumtetraborate–NaOH buffer (0.10 mol L⁻¹, pH 9.0) to give high yields of PASC-amine derivatives. Derivatives exhibited intense fluorescence with an excitation maximum at λ_ex 265 nm and an emission maximum at λ_em 418 nm. The separation of derivatives was performed by a reversed-phase Hypersil BDS C8 column in combination with a gradient elution. The identification of derivatives was carried out by online post-column mass spectrometry with atmospheric pressure chemical ionization (APCI) source in positive-ion detection mode. Excellent linear responses were observed with the correlation coefficients of larger than 0.9997, and detection limits (at a signal-to-noise of 3:1) were from 3.0 to 24.3 fmol. Comparing with 10-ethyl-acridine-2-sulfonyl chloride (EASC), PASC exhibited more intense fluorescence and ultraviolet absorbance. The proposed method is sensitive and reproducible for the determination of aliphatic amines from water and soil samples.

     

Deep eutectic solvent promoted highly efficient synthesis of N,N’-diarylamidines and formamides

A deep eutectic solvent was used as a dual catalyst and reaction medium for the efficient N-formylation of aromatic amines without hazardous organic solvent and catalyst. Treatment of aromatic amines with trimethyl orthoformate and formic acid in deep eutectic solvent at 70 °C gives the corresponding N-formyl derivatives in good to excellent yields. This simple ammonium deep eutectic solvent, easily synthesized from choline chloride and SnCl₂, with 100% atom economy and making it applicable to industry and laboratory. Furthermore, heating the trimethyl orthoformate and aromatic primary amines in the deep eutectic solvent results in formation of the corresponding N,N’-diarylamidines in high yields.     

A new cationic poly(ester-anhydride): Synthesis, structure characterization, and biological properties

To improve the cytotoxicity and biocompatibility of cationic polymers used as gene carriers, new cationic poly(ester-anhydride) copolymers (Pea-PAs) bearing a quaternary ammonium group in the backbone were synthesized through a reaction between an aminoester dicarboxylic acid with a tertiary amine in the backbone and excess acetyl chloride. Their structure was characterized by nuclear magnetic resonance (NMR), Fourier transform infrared spectrometry (FTIR), and gel permeation chromatography (GPC). They degraded hydrolytically in 20 mM HEPES buffer at pH 7.4 at 37°C with a half-life of more than 70 h. Their cytotoxicity was substantially lower than that of PEI. The blood clotting index (BCI) and haemolysis ratio (HR) also showed that these newly synthesized Pea-PA polymer are biopolymers with good blood compatibility.     

Choline chloride-urea deep eutectic solvent as an efficient media for the synthesis of propargylamines via organocuprate intermediate

A facile method for the synthesis of various propargylamines derivatives with different structural parts has been reported. The reaction has consisted of one-pot coupling between aldehydes, secondary amines and terminal alkynes using CuCl as a catalyst and choline chloride/urea DES as a cheap and biocompatible reaction media. The procedure is free of using toxic solvents and used CuCl as an available, inexpensive and non-toxic catalyst. Using this methodology, 15 different propargylamine derivatives were successfully synthesized at 60 °C in 15 hr, mostly in good yields.     

The application of 2,4,6-trinitrobenzene-1-sulphonic acid in the differential pulse polarographic determination of amines

The differential pulse polarographic behaviour of 2,4,6-trinitrophenyl (TNP) derivatives of several primary amines and amino acids was investigated in the presence of sulphite ion. All the derivatives produced a polarographic peak for their complexes with sulphite (1 × 10^?2 M) in pH 8.0 phosphate buffer (0.05 M)/0.1 M potassium chloride. The derivatives of proteins and peptides did not give such a peak. A 5-min reaction time at room temperature (or 50°C for lysine) and pH 10.5 using 1 × 10^?4 M 2,4,6-trinitrobenzene-1-sulphonic acid provides the optimal conditions for the determination of 5 × 10^?6?2.5 × 10^?5 M amines. The relative standard deviation for determining 1 × 10^?5 M glycine (n = 5) was 1%.     

Wavelength dependence in photochemical vapor deposition of aluminum film using dimethylaluminum hydride

In photochemical vapor deposition of aluminum film on silicon using dimethylaluminum hydride, (CH₃)₂AlH, a surface reaction dominated below a (CH₃)₂AlH pressure of 0.3 m Torr at 200°C, which was induced only with the 160 nm band emitted from a deuterium lamp. A gas-phase reaction occurred above 0.3 mTorr at 200°C, which could be induced by both 160 nm and 240 nm emission bands from the lamp. To distinguish between surface ad gas-phase reactions, a thickness profile was used. At 240°C the surface reaction could be induced even by the 240 nm band, while the deposits formed under illumination of the two bands were thinner than those obtained with only the 240 nm band, indicating occurrence of vacuum ultraviolet (VUV)-enhanced desorption. The mechanism responsible for the observed wavelength dependence in unclear. The electrical resistivity of the films deposited at 200°C was 4.5 μΩ cm, which did not change with wavelength.     

Thermal decyanation,a new organic reaction. II

When heated in solution at about 160°C, pyridine quaternary salts of bromomalonamides lose 1 mole of cyanic or isocyanic acid almost quantitatively in a manner quite analogous to the decarboxylation of an acid. By DTA and DSC, the crystalline salts are stable up to their melting points (>220°C) at which temperatures concurrent fusion and decyanation processes occur (endotherm); these are immediately followed by an exotherm related to the trimerization of cyanic acid. TGA measurements on the solid salts do not clearly define the loss of 1 mole of cyanic acid because in the solid state, thermal decyanation is accompanied to some extent by other pyrolytic reactions. Preparative methods for quaternizing poly(4-vinylpyridine) with bromomalonamide are described and two polymeric quaternary salts (33 and 100% substituted) were prepared and analyzed. These polyelectrolytes are water soluble and upon the addition of base the yellow polymeric nitrogen ylids are generated. Infrared spectra on the polymeric quaternary salts and visible spectra on the polymeric ylids are included. The ylid chromophore has an ε = 1800 at λ_max = 415 nm. The dilute solution viscosity behavior of these polymers in H₂O and in 0.05N KBr is typical of polyelectrolytes. Both polymers in dilute solution show a maximum in η_sp versus pH plots. In water, the viscosity of these polymers decreases with time, and it is proven that this results from a conformational change which accompanies amide hydrolysis rather than polymer backbone degradation. Glass transitions are not detectable by DTA but both polymers show well-defined trimerization exotherms for cyanic acid starting at 170–175°C. Thus, decyanation of the solid polymeric quaternary salts is more analogous to decyanation of the crystalline quaternarys in solution than as solids. TGA measurements on the polymers show weight losses which are of the correct order of magnitude and in the correct temperature range for monodecyanation. Some data are presented which suggest that perhaps a second mole of cyanic acid is lost at about 250°C. Quaternization of poly(4-vinylpyridine) with bromomalonamide reduces its gross decomposition temperature from 385°C to about 285–317°C. It is demonstrated how thermal decyanation can be used for the in situ generation of cyanic acid for the modification of organic compounds. The preparation of a partial urethane of poly(vinyl alcohol) using this method is described. We have also shown that aliphatic quaternary salts can be prepared and that they too undergo the decyanation reaction.     

Modified aza-claisen rearrangement: Generation and isomerization of allyl enammonium salts

Base-promoted reaction of ketones and diethyl (diazomethyl)phosphonate in the presence of allylic amines affords allylic enamines in good yields. These enamines undergo [3,3]-sigmatropic rearrangement upon alkylation and heating at 80°C to iminium salts which can be hydrolysed to aldehydes. The procedure allows generation of quaternary carbon centers under mild reaction conditions.     

Further studies on the reaction of amines and proteins with 4-fluoro-7-nitrobenzo-2-oxa-1,3-diazole

The reaction of glycine with NBD-F (4-fluoro-7-nitrobenzo-2-oxa-1,3-diazole) is investigated to establish conditions that provide a high formation rate of NBD-glycine and a low hydrolysis rate of the reagent. The reaction rate increases with higher temperature, larger contents of organic solvent and a sodium borate buffer. The use of borate buffer decreases ther ate of hydrolysis of the reagent. For low-molecular-weight amines, condition for a suitable liquid chromatographic postcolumn reactor include a high content of acetonitrile and 0.1 M sodium borate (pH 8.0–8.5). For proteins, separated by molecular-exclusion chromatography, water is needed for sensitive reactions. Suitable postcolumn reactor conditions include borate buffer (pH 7.9) containing 0.1 M potassium chloride, a 0.02% (w/v) NBD-F solution in acetonitrile with reaction at 50°C for about 45 s. The detection limits for human serum albumin, β-lactoglobulin and myoglobin are 6.6 pmol, 8.4 pmol and 11 pmol, respectively.     

Dynamic Covalent Chemistry of Nucleophilic Substitution Component Exchange of Quaternary Ammonium Salts

Dynamic covalent libraries (DCLs) of quaternary ammonium cations were set up by reversible nucleophilic substitution (S_N2′ and S_N2) exchange reactions of ammonium salts and tertiary amines. The reactions were conducted at 60 °C to generate thermodynamically and kinetically controlled mixtures of quaternary ammonium compounds and tertiary amines, and were accelerated by using iodide as a nucleophilic catalyst. Microwave irradiation was used to assist the exchange reaction between the pyridinium salts and pyridine derivatives. Finally, experiments towards the generation of dynamic ionic liquids were performed. The results of this study pave the way for the extension of dynamic combinatorial chemistry to nucleophilic substitution reactions.     

Star‐shaped cyclopolymers: A new category of star polymer with rigid cyclized arms prepared by controlled cationic cyclopolymerization and subsequent microgel formation of divinyl ethers

The combination of living/controlled cationic cyclopolymerization and crosslinking polymerization of bifunctional vinyl ethers (divinyl ethers) was applied to the synthesis of core‐crosslinked star‐shaped polymers with rigid cyclized arms. Cyclopolymerization of 4,4‐bis(vinyloxymethyl)cyclohexene ( 1 ), a divinyl ether with a cyclohexene group, was investigated with the hydrogen chloride/zinc chloride (HCl/ZnCl₂) initiating system in toluene at 0 °C. The reaction proceeded quantitatively to give soluble poly( 1 )s in organic solvents. The content of the unreacted vinyl groups in the produced polymers was less than ～3 mol%, and therefore, the degree of cyclization of the polymers was determined to be ～97%. The number‐average molecular weight (M_n) of the polymers increased in direct proportion to monomer conversion and further increased on addition of a fresh monomer feed to the almost completely polymerized reaction mixture, indicating that living cyclopolymerization of 1 occurred. The chain linking reactions among the formed living cyclopolymers with 1,4‐bis(vinyloxy)cyclohexane ( 3 ) as a crosslinker in toluene at 0 °C produced core‐crosslinked star‐shaped cyclopoly( 1 )s [star‐poly( 1 )s] in high yield (100%). Dihydroxylation of the cyclohexene double bonds of star‐poly( 1 ) gave hydrophilic water‐soluble star‐shaped polymers with rigid arm structure [star‐poly( 1 )‐OH] with thermo‐responsive function in water. T_gs of star‐poly( 1 ) and star‐poly( 1 )‐OH were 135 °C and 216 °C, respectively; these values are very high as vinyl ether‐based star‐shaped polymers. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1094–1102     

Dansylation of aromatic, aliphatic, and medicinal carboxylic acid compounds in 1 M Na2CO3 buffer

Dansyl chloride (DNS-Cl) is a sulfonyl chloride compound which is utilized as a fluorescent probe for quantitative analysis or structural studies of complex molecules. The fluorescent emission was sufficiently strong to permit detection of less than 10 μg of the carboxyl compounds studied here. The dansylation of aromatic carboxyl compounds (i.e. aspirin), aromatic primary amines, and aliphatic carboxyl compounds was accomplished in 1 M Na₂CO₃ buffer at pH 11. The fluorescent labeled analytes were then isolated by thin layer chromatography (TLC) or the aqueous mixture was pre-extracted with proline (or glycine) to eliminate back-ground emission originating from the hydrolized or sulfonic acid form of DNS-Cl. Fluorescent labeled analytes are clearly discerned under ultraviolet light. Limits of detection for dansylated carboxyl compounds was 1-5 μg, however for amines it was approximately 1 μg. Dansylation of aromatic primary amines proceeded much faster (15 min) than that of carboxyl compounds (≥1.5 h) at 25 °C. Despite the aqueous solubility of analytes, which ranged from less than 0.004-5.30 mg/ml, the dansylation of carboxyl compounds was effective. Various organic solvents for extracting derivatives from aqueous mixture were evaluated.     

Convenient synthesis of cyclic carbonates from CO2 and epoxides by simple secondary and primary ammonium iodides as metal‐free catalysts under mild conditions and its application to synthesis of polymer bearing cyclic carbonate moiety

Hydroiodides of secondary and primary amines effectively catalyzed the reaction of carbon dioxide and epoxides under mild conditions such as ordinary pressure and ambient temperature, to obtain the corresponding five‐membered cyclic carbonates in moderate to high yields. Detailed investigation showed that the catalytic activity was highly affected by the counter anions of the ammonium salts; the iodides catalyzed efficiently the carbonate‐forming reactions, whereas the bromide and chloride counterparts exhibited almost no catalysis. We also revealed that two important factors on the amine moieties that affected the catalytic reactions. First, the catalytic activity increased with increasing bulkiness of the substituents on the ammonium nitrogen atoms. Second, the catalysis became more efficient as the parent amines become more basic. Dicyclohexylammonium iodide was the best catalyst among the ammonium salts investigated in this study. As an application of this reaction system, we synthesized homo‐ and copolymers bearing epoxide pendant groups as substrates, which were converted with high efficiency into the corresponding homo‐ and copolymers bearing cyclic carbonate pendant groups under 1 atm at 45 °C. All polymers were easily purified simply by precipitation in water, and were isolated in high yields (>95%). © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Extractive recovery of gallium(III) from acid sulfate solutions with primary amines

Liquid extraction of Ga(III) ions with technical-grade aliphatic amines from sulfate media at a temperature of 20 ± 5°C was studied. The composition of the complex being extracted was determined and the equation of the reaction of Ga(III) extraction with primary amines was derived. The equilibrium constant of the reaction of gallium(III) extraction from acid sulfate solutions was found.     

Release of cationic drugs from loaded clay minerals

The adsorption of promethazine chloride [10-(2-dimethylammonium propyl) fenothiazine chloride] and buformin hydrochloride (1-butylbiguanidine chloride) on montmorillonite was studied in previous work. The present article focuses on the desorption of these molecules from their organocomplexes in a medium of artificial intestinal juice (pH 7.0 ± 0.1) at the temperature of the human body (37 ± 0.5 °C). The desorption was investigated by kinetic studies, basal spacing measurements and Fourier transform IR studies. Important quantitative differences were observed: buformin, which adsorbed in a monolayer coverage, exhibited a very high desorption rate, whereas promethazine formed a pseudotrilayer arrangement and showed a lower dissolution rate. Received: 20 January 2001 Accepted: 8 March 2001     

Safe and Efficient Reductive Methylation of Primary and Secondary Amines Using N-Methylpyrrolidine Zinc Borohydride

An efficient, general procedure for reductive methylation of primary and secondary amines with 37% formaldehyde using N-methylpyrrolidine zinc borohydride (ZBHNMP) as a reducing agent gave the corresponding tertiary amines in excellent yields. The reaction was carried out in tetrahydrofuran under neutral conditions at 0–10 °C.     

Synthesis and thermolysis of lithium aluminum double hydroxide containing [Fe(OH)Edta]<Superscript>2−</Superscript>

The reaction of the chloride form of lithium aluminum layered double hydroxide (Li-Al LDH) with an aqueous solution of NaFeEdta · 2H₂O (pH 3.7) was studied. Anion exchange of chloride ions for [FeEdta]^? anions almost does not occur under the conditions of our experiment. Increasing pH to 8.0 initiates anion exchange of chloride ions for [Fe(OH)Edta]^2? anions, generating Li-Al LDH, whose structure is built of metal-hydroxide layers [LiAl₂(OH)₆]⁺ and layers containing [Fe(OH)Edta]^2? anions and water molecules. Thermolysis of Li-Al-[Fe(OH)Edta] was studied in an inert atmosphere and in vacuo. Heating to 220°C mainly eliminates interlayer water molecules. A further rise in temperature induces the dehydration of metal-hydroxide layers and OH groups of [Fe(OH)Edta]^2? anions and the destruction of the organic component of the anionic complex. At 375°C, an X-ray amorphous product is formed, in which most iron is in the form of Fe²⁺ cations. With increasing thermolysis temperature to 450°C, a magnetically ordered solid phase containing Fe²⁺ cations appears. Further temperature elevation to 550°C generates an α-Fe phase.     

LC Analysis of Aliphatic Primary Amines and Diamines After Derivatization with 2,6-Dimethyl-4-quinolinecarboxylic Acid N-Hydroxysuccinimide Ester

A method for sensitive simultaneous analysis of aliphatic primary amines and diamines has been developed and validated. The compounds were analyzed by reversed-phase high-performance liquid chromatography after pre-column derivatization with 2,6-dimethyl-4-quinolinecarboxylic acid N-hydroxysuccinimide ester as fluorescent probe. The derivatization reaction was performed at 50 °C for 40 min in 0.1 mol L^?1 borax buffer solution (pH 7.5). The resulting fluorophores were separated to baseline on a C₁₈ column and fluorimetrically detected at λ _ex/λ _em = 326/409 nm. Detection limits were in the range 0.50–0.02 nmol L^?1. The method was successfully used for analysis of aliphatic amines in water, human urine, and serum.     

Liquid–liquid–solid equilibrium for the water + sodium chloride + potassium chloride + 1-butanol quaternary system at 25 °C

The methodology for the study of the liquid–liquid–solid equilibrium of quaternary systems including two inorganic salts, water and an organic solvent has been reviewed and applied to the water + sodium chloride + potassium chloride + 1-butanol quaternary system at 25 °C. The different equilibrium regions have been systematically studied.The experimental equilibrium data have been used to check the accuracy of the predictions using the electrolyte NRTL model (MNRTL) and the parameters obtained by correlation of ternary systems. The results obtained with the model are satisfactory.