Synthesis of Novel Polymers with a Chiral 1,2-Diamine Moiety by Polycondensation and their Application to Catalyst for Asymmetric Hydrogenation of Aromatic Ketones

Summary: Novel polymers with chiral 1,2-diamine moiety were successfully synthesized by polycondensation of N-Boc protected enantiopure 1,2-diamine bearing two phenol groups ( S , S )-4 , bisphenol derivatives, and dibromides, followed by deprotection of N-Boc moiety. Hydrogenation of acetophenone was performed with use of polymeric catalyst system prepared from the polymer-supported chiral 1,2-diamine and RuCl₂/(S)-BINAP. The reaction proceeded smoothly even in 2-propanol to give 1-phenylethanol in quantitative yield with high level of enantioselectivity. Furthermore, various other aromatic ketones could be asymmetrically hydrogenated by the polymeric catalyst system.     

N-Salicyl-β-aminoalcohols as a new class of ligand for catalytic asymmetric Strecker reactions

An enantioselective Strecker synthesis employing novel chiral titanium complex catalysts derived from structurally simple chiral N-salicyl-β-amino alcohols is described. Reactions of N-benzylidenebenzylamine with trimethylsilyl cyanide in the presence of the catalyst (10 mol%) gave the corresponding α-aminonitrile in good to excellent yields, along with relatively high enantioselectivity (up to 86% ee). Similar reactions with various imines derived from aromatic aldehydes resulted in moderate to good enantioselectivity (44-81% ee).     

Optically active imidazole-containing polymers

In order to investigate the stereospecificity of enzyme-catalyzed reactions, an optically active copolymer of 4(5)-vinylimidazole and 2,5(S)-dimethyl-1-hepten-3-one was synthesized, and its effects on the solvolytic rates, in ethanol-water, of the p-nitrophenyl and 4-carboxy-2-nitrophenyl esters of 3(R)- and 3(S)-methylpentanoic acid and of the commercially available N-carbobenzoxy-(R)- and (S)-phenylalanine p-nitrophenyl esters were investigated. The optically active comonomer was prepared by thermal decomposition of solid (+)-1-piperidino-2,5(S)-dimethylheptan-3-one hydrochloride, which was obtained from the reaction of 2(S)-methylbutyllithium with 3-piperidino-2-methylpropionitrile. The 3(R)-methylpentanoic acid was prepared in 92% optical purity from L -alloisoleucine via diazotization in concentrated hydrobromic acid and subsequent reductive debromination with zinc amalgam in dilute hydrochloric acid. In the optically active copolymer-catalyzed solvolyses of the optically active esters performed at pH values of 6–8 no significant differences between the solvolytic rates of (R) and (S) isomers of substrates were observed. Poly-L -histidine was also employed as a catalyst for the solvolyses of these substrates. At pH 6.0 in ethanol–water the latter catalyst also failed to exhibit specificity towards (R) and (S) substrates.     

Synthesis and bifunctional asymmetric organocatalysis of helical poly(phenylacetylene)s bearing cinchona alkaloid pendants via a sulfonamide linkage

Four novel helical poly(phenylacetylene)s with amino‐functionalized cinchona alkaloid pendant groups connecting to the phenyl rings through a sulfonamide linkage were synthesized by the polymerization of the corresponding phenylacetylene monomers using Rh⁺(2,5‐norbornadiene)[(η⁶‐C₆H₅)B^?(C₆H₅)₃] (Rh(nbd)BPh₄) as the catalyst. The optically active sulfonamide‐linked polymers adopted a helical conformation with an excess of one‐handedness as supported by the appearance of the induced Cotton effects in the main‐chain chromophore regions, and efficiently catalyzed the enantioselective methanolytic desymmetrization of a cyclic anhydride and aza‐Michael addition of aniline to chalcone, thereby producing the corresponding optically active products up to 86% enantiomeric excess. However, their enantioselectivities from the methanolytic desymmetrization were slightly lower than those catalyzed by the corresponding cinchona alkaloid‐bound monomers. On the other hand, during the asymmetric aza‐Michael addition, a unique enhancement of the enantioselectivity was observed for several sulfonamide‐linked helical polymers, and thus affording a remarkably higher enantioselectivity compared to those of the corresponding monomers and nonhelical polymers bearing the identical cinchona alkaloid residues. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2869–2879     

A Copper(I)‐Catalyzed Enantioselective γ‐Boryl Substitution of Trifluoromethyl‐Substituted Alkenes: Synthesis of Enantioenriched γ,γ‐gem‐Difluoroallylboronates

The first catalytic enantioselective γ‐boryl substitution of CF₃‐substituted alkenes is reported. A series of CF₃‐substituted alkenes was treated with a diboron reagent in the presence of a copper(I)/Josiphos catalyst to afford the corresponding optically active γ,γ‐gem‐difluoroallylboronates in high enantioselectivity. The thus obtained products could be readily converted into the corresponding difluoromethylene‐containing homoallylic alcohols using highly stereospecific allylation reactions.     

Multichain copoly(α-amino acid). I. Multichain copoly(α-amino acid) prepared by reaction of copoly(L-lysine γ-methyl-L-glutamate) with N-carboxy anhydride of Nϵ-carbobenzyloxy-L-lysine

Polymerization of the N-carboxy anhydride of N^?-carbobenzyloxy-L -lysine in the presence of multifunctional polymeric initiator, copoly(L -lysine γ-methyl-L -glutamate) was studied in N,N-dimethylformamide containing 3% (v/v) of dimethyl sulfoxide. Multichain copoly(α-amino acid), i.e., multi-N^?-poly(N^?-carbobenzyloxy-L -lysine)copoly(L -lysine γ-methyl-L -glutamate), was obtained with linear poly(N^?-carbobenzyloxy-L -lysine) as by-product that could be removed by reprecipitation as was evidenced by gel-permeation chromatography. The degree of polymerization of the branch polymer chains estimated by the osmometric molecular weight determination and amino acid analysis was between 20 and 60, which decreased with increasing lysine content of the polymeric initiator. The stability of α-helical conformation of the multichain copoly(α-amino acid) was studied in the chloroform–dichloroacetic acid system at 25°C by the ORD technique. The α-helical conformation of poly(N^?-carbobenzyloxy-L -lysine) branches was less stable than those of linear poly(N^?-carbobenzyloxy-L -lysine) and the core molecular chains of the multichain copoly(α-amino acid).     

Preparation of some new derivatives of (1R,2S)-1,2-diphenyl-2-aminoethanol and enantioselective borane reduction of propiophenone

Some new methylated and N-alkylated derivatives of (1R,2S)-1,2-diphenyl-2-amino ethanol were synthesized and applied to enantioselective borane reduction of propiophenone. The relationship between catalyst structure and enantioselectivity was discussed in detail.     

Asymmetric interaction of optically active polymers with asymmetric small molecules. IV. Effect of hydrophobic groups on asymmetric interaction

In order to investigate the mechanism of the asymmetric interaction between optically active polymers and small molecules, optically active copolymers of N-acrylyl L-amino acids(N-acrylyl-L -phenylalanine, N-acrylyl-L -tryptophan, and N-acrylyl-L -leucine, respectively) and N,N′-hexamethylene diacrylylamide were synthesized, and interaction of these polymers with the optical isomers of phenylalanine and tryptophan was investigated. In the interaction of these acidic polymers with amino acids performed at pH 5.0, significant difference in amount of adsorption between the D and L isomers of amino acids were observed, and the L form of amino acids was adsorbed preferentially. The interaction between optically active small molecules was also investigated: these results showed a similarity to the results for interaction between optically active polymers and amino acids. In some instances of asymmetric interaction the influence of hydrophobic interaction between a polymer and substrate was clearly perceived. The stereoselective effects on the asymmetric interaction are discussed.     

Stereoselective Michael Addition of Carbonyl Compounds to ( E )-β-Nitrostyrene Catalysed by N -Toluensulfonyl-l -proline Amide in Ionic Liquids

Summary. N-Toluensulfonyl-l-prolin amide was tested as catalyst in the enantioselective Michael addition of carbonyl compounds to (E)-β-nitrostyrene in nine ionic liquids under different reaction conditions. The reaction rates and enantioselectivities were strongly dependent on the ionic liquids. Change of enantioselectivity was observed too and it is attributed to both the cation and the anion of ionic liquid. The best yields (up to 98%) and enantioselectivity (70% ee) of product were obtained in a basic ionic liquid [bmim]BF₄ at room temperature.     

Stereoselective Michael Addition of Carbonyl Compounds to ( E )-β-Nitrostyrene Catalysed by N -Toluensulfonyl-l -proline Amide in Ionic Liquids

N-Toluensulfonyl-l-prolin amide was tested as catalyst in the enantioselective Michael addition of carbonyl compounds to (E)-β-nitrostyrene in nine ionic liquids under different reaction conditions. The reaction rates and enantioselectivities were strongly dependent on the ionic liquids. Change of enantioselectivity was observed too and it is attributed to both the cation and the anion of ionic liquid. The best yields (up to 98%) and enantioselectivity (70% ee) of product were obtained in a basic ionic liquid [bmim]BF₄ at room temperature.     

Enantioselective Synthesis of AG‐041R by using N‐Heteroarenesulfonyl Cinchona Alkaloid Amides as Organocatalysts

The organocatalytic enantioselective decarboxylative addition of malonic acid half thioesters to ketimines derived from isatins by using N‐heteroarenesulfonyl cinchona alkaloid amides afforded products with high enantioselectivity. The products could be converted into optically active AG‐041R. X‐ray crystallographic analysis revealed that the hydrogen bonding between the sulfonimide proton and the 8‐quinolyl nitrogen atom plays an important role in exerting the enantioselectivity of the reaction.     

Polymer-supported l-prolinol-based catalysts for the enantioselective addition of dialkylzinc reagents to N-(diphenylphosphinyl)imines

l-Prolinol-based ligands anchored to Merrifield or Wang-type resins have been shown to form efficient catalysts for the enantioselective addition of dialkylzinc reagents to N-(diphenylphosphinyl)imines. The enantioselectivity achieved with the polymeric catalyst (ee up to 88%) is slightly lower than the one obtained with the homogeneous ligand N-benzyl-l-prolinol, but the polymer-supported ligand presents the advantage of its recyclability: it can be recovered and used in up to six consecutive catalytic cycles with only a slight decrease in the enantiomeric excess. The phosphinamides obtained as addition products can be transformed into the corresponding enantiomerically enriched α-branched primary amines under mild acidic conditions.     

Asymmetric addition of KCN and Ac2O to aldehydes catalyzed by recyclable polymeric salen-Ti(IV) complexes

Polymeric salen-Ti(IV) complexes were employed in the enantioselective O-acetyl cyanation of aldehydes with KCN and Ac₂O. The polymeric catalysts with appropriate crosslinking degree exhibited good activities and enantioselectivities, up to 94% yield and 91% ee were obtained at −20 °C with 1 mol % of catalyst (based on bimetallic catalytic unit). Moreover, the crosslinked polymeric catalyst could be easily recovered and reused for six consecutive runs without obvious decrease in activity and enantioselectivity.     

Preparation of the enantiopure 1,2-diamine monomer and its polymerization: The efficient polymeric chiral ligand of an asymmetric hydrogenation catalyst

An enantiopure 1,2-diamine monomer possessing a p-vinylbenzyl group as a polymerizable group was synthesized from chiral 1,2-bis(p-hydroxyphenyl)-N,N′-bis(tert-butoxycarbonyl)-1,2-diaminoethane. The chiral monomer was copolymerized with styrene, and this was followed by the deprotection of the tert-butoxycarbonyl group, which yielded the polymer-supported chiral 1,2-diamine. The polymeric catalyst system was established with the polymeric chiral 1,2-diamine complexed with 2,2′-bis(diphenylphosphino)-1,1′-binaphthyl/RuCl₂. In the presence of potassium tert-butoxide (t-BuOK), the polymeric catalyst system worked well in the asymmetric hydrogenation of aromatic ketones. The corresponding chiral secondary alcohols were obtained in quantitative yields with a high level of enantioselectivity. The insolubility of the catalyst, caused by the crosslinked structure of the polymer, made it recyclable. The polymeric catalyst was reused several times without a loss of catalytic activity. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4556–4562, 2004     

Catalytic enantioselective addition of diethylzinc to (hetero)aromatic aldehydes

The asymmetric alkylation with diethylzinc of five heterocyclic aldehydes and benzaldehyde (for comparison) has been studied in the presence of two optically active amino alcohols: (S)-2-amino-1-butanol (AB) and (1S,2R)-N,N-dibutylnorephedrine (DBNE). A number of chiral (hetero)aromatic secondary alcohols were synthesized in high yields (95–98%) with enantioselectivity up to 92% enantiomeric excess (ee) in the presence of DBNE catalyst. Optically active thienyl and 4-pyridyl derivatives were prepared for the first time by catalytic asymmetric alkylation. The influence of the amount of DBNE on the enantioselectivity was investigated. In contrast to benzaldehyde, 2-furan- and 2-thiophene-carbaldehydes, in the case of 3- and 4-pyridinecarbaldehydes the ee values depend directly on the catalyst concentration. © 1998 John Wiley & Sons, Ltd.     

1D Azido bridged Cu(II) coordination polymer with 1,3-oxazolidine ligand as an effective catalyst for green click synthesis of 1,2,3-triazoles

A new 1D azido bridged Cu(II) coordination polymer with 1,3-oxazolidine based ligand, [Cu(H₃L)(μ_1,3-N₃)(N₃)]_n ( 1 ), was synthesized and characterized by elemental analysis and spectroscopic methods. The structure of 1 was also determined by single crystal X-ray analysis which indicated the 1D polymeric chain is generated by end-to-end (EE) azide bridge. The obtained compound was employed as catalyst in green click synthesis of β-hydroxy-1,2,3-triazoles from one-pot three-component cycloaddition reaction of epoxide-azide-alkyne. The catalytic reactions were carried out in water as a safe, cheap and green solvent. The catalytic studies indicated that the obtained 1D azido bridged Cu(II) coordination polymer is an active catalyst for preparing β-hydroxy-1,2,3-triazoles. The effect of temperature on the selectivity of the catalytic system was studied and the results indicated this catalytic system has high selectivity at low temperatures. The structure the product obtained from the reaction of 2,3-epoxypropylphenylether, azide and 1-ethynyl-1-cyclohexanol ( T4 ) was determined by single crystal X-ray analysis. The results indicate Cu(II) coordination polymers can be a new class of catalytic systems for green click synthesis of 1,2,3-triazoles.     

Gold(I)‐Catalyzed Enantioselective Intermolecular Hydroarylation of Allenes with Indoles and Reaction Mechanism by Density Functional Theory Calculations

Chiral binuclear gold(I) phosphine complexes catalyze enantioselective intermolecular hydroarylation of allenes with indoles in high product yields (up to 90 %) and with moderate enantioselectivities (up to 63 % ee). Among the gold(I) complexes examined, better ee values were obtained with binuclear gold(I) complexes, which displayed intramolecular Au^I Au^I interactions. The binuclear gold(I) complex 4c [(AuCl)₂( L3 )] with chiral biaryl phosphine ligand (S)‐(−)‐MeO‐biphep ( L3 ) is the most efficient catalyst and gives the best ee value of up to 63 %. Substituents on the allene reactants have a slight effect on the enantioselectivity of the reaction. Electron‐withdrawing groups on the indole substrates decrease the enantioselectivity of the reaction. The relative reaction rates of the hydroarylation of 4‐X‐substituted 1,3‐diarylallenes with N‐methylindole in the presence of catalyst 4c [(AuCl)₂( L3 )] / AgOTf [ L3 =(S)‐(−)‐MeO‐biphep], determined through competition experiments, correlate (r²=0.996) with the substituent constants σ. The slope value is −2.30, revealing both the build‐up of positive charge at the allene and electrophilic nature of the reactive Au^I species. Two plausible reaction pathways were investigated by density functional theory calculations, one pathway involving intermolecular nucleophilic addition of free indole to aurated allene intermediate and another pathway involving intramolecular nucleophilic addition of aurated indole to allene via diaurated intermediate E2 . Calculated results revealed that the reaction likely proceeds via the first pathway with a lower activation energy. The role of Au^I Au^I interactions in affecting the enantioselectivity is discussed.     

H-Bond Mediated Phase-Transfer Catalysis: Enantioselective Generating of Quaternary Stereogenic Centers in β-Keto Esters

In this work, we would like to present the development of a highly optimized method for generating the quaternary stereogenic centers in β-keto esters. This enantioselective phase-transfer alkylation catalyzed by hybrid Cinchona catalysts allows for the efficient generation of the optically active products with excellent enantioselectivity, using only 1 mol% of the catalyst. The vast majority of phase-transfer catalysts in asymmetric synthesis work by creating ionic pairs with the nucleophile-attacking anionic substrate. Therefore, it is a sensible approach to search for new methodologies capable of introducing functional groups into the precursor’s structure, maintaining high yields and enantiomeric purity.     

Asymmetric reduction of aromatic ketimines in the presence of helical polymer as catalyst

Novel optically active ethynyl monomers were synthesized from L ‐valine and N‐methyl‐L ‐valine, and polymerized with a rhodium catalyst to provide the polymers with number‐average molecular weights over 200,000 in good yields. The CD and UV‐vis spectra of the polymers indicated that they took helical structures with predominantly one‐handed screw sense in solution. The polymers served as catalysts of asymmetric reduction of aromatic ketimines to afford optically active amines in moderate yields. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4971–4981, 2009     

Synthesis of chiral iridium complexes immobilized on amphiphilic polymers and their application to asymmetric catalysis

This article details the enantioselective catalytic performance of crosslinked, polymer immobilized, Ir‐based, chiral complexes for transfer hydrogenation of cyclic imines to chiral amines. Polymerization of the achiral vinyl monomer, divinylbenzene, and a polymerizable chiral 1,2‐diamine monosulfonamide ligand followed by complexation with [IrCl₂Cp*]₂ affords the crosslinked polymeric chiral complex, which can be successfully applied to asymmetric transfer hydrogenation of cyclic imines. Polymeric catalysts prepared from amphiphilic achiral monomers have high catalytic activity in the reaction and can be used both in organic solvents and water to give chiral cyclic amines with a high level of enantioselectivity (up to 98% ee). The asymmetric reaction allows for reuse of the heterogeneous catalyst without any loss in activity or enantioselectivity over several runs. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3037–3044