Heterotactic poly(vinyl alcohol)

Bulky substituents in vinyl trialkylsilyl ethers and vinyl trialkylcarbinyl ethers led to heterotactic polymers (H = 66%). The polymers were converted into poly(vinyl alcohol) (PVA) and further to poly(vinyl acetate), and tacticity was determined as poly(vinyl acetate). Vinyl triisopropylsilyl ether in nonpolar solvents yielded a heterotactic polymer with a higher percentage of isotactic triads than syndiotactic triads (Hetero-I). Vinyl trialkylcarbinyl ethers in polar solvents gave a heterotactic polymer with more syndiotactic triads than isotactic (Hetero-II). Heterotactic PVA was soluble in water and showed characteristics infrared absorptions. Interestingly, Hetero-I PVA showed no iodine color reaction, but Hetero-II showed a much more intense color reaction than a commercial PVA. The mechanism of heterotactic propagation was discussed in terms of the Markóv chain model.     

Characterization of poly(vinyl alcohol) during the emulsion polymerization of vinyl acetate using poly(vinyl alcohol) as emulsifier

During the emulsion polymerization of vinyl acetate (VAc) using poly(vinyl alcohol) (PVA) as stabilizer and potassium persulfate as initiator, the VAc reacts with PVA forming PVA-graft-PVAc. When the grafted polymer reaches a critical size it becomes water-insoluble and precipitates from the aqueous phase contributing to the formation of polymer particles. Since particle formation and therefore the properties of the final latex will depend on the degree of grafting, it is important to quantify and to characterize the grafted PVA. In this work, the quantitative separation and characterization of the grafted water-insoluble PVA was carried out by a two-step selective solubilization of the PVAc latex, first with acetonitrile to separate PVAc homopolymer, followed by water to separate the water-soluble PVA from the remaining acetonitrile-insoluble material. After the separation, the water-soluble and water-insoluble PVA were characterized by Fourier Transform Infrared (FTIR) spectroscopy and ¹H and ¹³C nuclear magnetic resonance (NMR) analyses, from which the details of the PVA-graft-PVAc structure were obtained. © 1996 John Wiley & Sons, Inc.     

Long branching in poly(vinyl acetate) and poly(vinyl alcohol). II. Polymerization of vinyl acetate in the presence of crosslinked poly(vinyl alcohol)

It is a common view that poly(vinyl acetate) has many branches at the acetyl side group, but that the corresponding poly(vinyl alcohol) has little branching. In order to study the branching in poly(vinyl acetate) and poly(vinyl alcohol) which is formed by chain transfer to polymer, the polymerization of ¹⁴C-labeled vinyl acetate in the presence of crosslinked poly(vinyl acetate), which was able to be decrosslinked to give soluble polymers, was investigated at 60°C and 0°C. This system made it possible to separate as well as to distinguish the graft polymer from the newly polymerized homopolymer. Furthermore, the degree of grafting onto the acetoxymethyl group and onto the main chain were estimated. It became clear that, in the polymerization of vinyl acetate, chain transfer to the polymer main chain takes place about 2.4 times as frequently at 60°C as that to the acetoxy group and about 4.8 times as frequently at 0°C.     

Study of the miscibility of poly(vinyl pyridines) with poly(vinyl acetate), poly(vinyl alcohol) and their copolymers

Miscibility of poly(4-vinyl pyridine) (P4VP) and poly(2-vinyl pyridine) (P2VP) with poly(viny acetate) (PVAc), poly(vinyl alcohol) PVA and poly(vinyl acetate-co-alcohol) (ACA copolymers) has been investigated over a wide composition range. Differentiaal scanning calorimetry (DSC) results indicate that P2VP is immiscible with PVAC, PVA, and their copolymers over the whole composition range. In turn, P4VP appears to be immiscible with PVAC and PVA, but miscible with some ACA copolymers in certain range of composition. The P4VP-ACA phase diagram for different copolymer compositions has been determined. The variation of the glass transition temperature with composition for miscible mixtures was found to follow the Gordon-Taylor equation, with the parameter κ dependent upon copolymer composition. FTIR analysis of blends reveal the existence of specific interactions via hydrogen bonding between hydroxyl groups and the nitrogen of the pyridinic ring, which appear to be decisive for miscibility. © 1994 John Wiley & Sons, Inc.     

The solvation of poly(vinyl alcohol)

The possible incorporation of water molecules within the crystal structure of poly(vinyl alcohol) is discussed. Modelling of the crystal structure suggested that water could be incorporated without severe disruption, and the effect on the X-ray powder diffraction trace was simulated. The effect of variation in tacticity is discussed in terms of the nature of the hydrogen bonding. Simulated traces are compared with experimental data from atactic samples in which a change in the diffraction peak intensities is observed for samples crystallised with water present. This is compared with samples produced from nonaqueous solutions.     

Radiation effects on the thermal degradation of poly(vinyl chloride) and poly(vinyl alcohol)

Radiation effects on the formation of conjugated double bonds in the thermal degradation of poly(vinyl chloride) (PVC) and poly(vinyl alcohol) (PVA) were investigated. Thin films of PVC and PVA were either irradiated with γ-rays at ambient temperature (pre-irradiation) and then subjected to thermal treatment, or irradiated at elevated temperatures (in situ irradiation). An extensive enhancement of the thermal degradation was observed for the pre-irradiation of the PVC films, which was more effective than the effect of the in situ irradiation at the same absorption dose. For the PVA degradation, however, the effect of the in situ irradiation was larger than that of the pre-irradiation. The results were explained and related mechanisms were discussed based on radiation-induced chemical reactions and their individual contributions to the thermal degradation behaviors of the two polymers. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 3089–3095, 1998     

Miscibility and orientation behavior of poly(vinyl alcohol) / poly(vinyl pyrrolidone) blends

The miscibility of poly(viny1 alcohol)/poly(vinyl pyrrolidone) (PVA/PVP) blends is investigated by differential scanning calorimetry (DSC) and wide-angle x-ray diffraction (WAXD). The molecular orientation induced by uniaxial stretching of the blends is also examined by WAXD and birefringence measurements. It is shown by the DSC thermal analysis that the polymer pair is miscible, since a single glass transition temperature (T_g) is situated between the T_gs of the two homopolymers at every composition. The T_g versus composition curve does not follow a monotonic function but exhibits a cusp point at a PVP volume fraction of a little under 0.7, as in a case predicted by Kovacs' theory. The presence of a specific intermolecular interaction between the two polymers is suggested by an observed systematic depression in the melting point of the PVA component. A negative value of the polymer-polymer interaction parameter, χ₁₂ = 0.35 (at 513 K), is estimated from a thermodynamic approach via a control experiment using samples crystallized isothermally at various temperatures. The extent of optical birefringence (Δn) of the drawn blends decreases drastically with increasing PVP content up to 80 wt %, when compared at a given draw ratio, and ultimately Δn is found to change from positive to negative at a critical PVP concentration of a little over 80 wt %. Discussion of the molecular orientation behavior takes into consideration a birefringence compensation effect in the miscible amorphous phase due to positive and negative contributions of oriented PVA and PVP, respectively.     

Structural irregularities in poly(vinyl alcohol)

Poly(vinyl alcohols) derived from the product of polymerization of vinyl acetate in methanol have been characterized by various physical and chemical methods before and after NaIO₄ cleavage. The 220-MHz ¹H-NMR spectra confirm the reliability of NaIO₄ titrimetry for estimating 1,2-glycol content and help explain the tendency for viscometry to grossly underestimate the 1,2-glycol content for low molecular weight polymers. The spectra and related chemical evidence indicate that the major endgroups are HOCH₂CH₂? and CH₃CH(OH)CH(OH)CH₂? . ß-Hydroxyethyl groups also occur as short chain branches, mainly attached to α carbon atoms in the normal head-to-tail polymer chain sequence. The concentrations of the branch and endgroups depend on polymerization conditions and help explain polymerization “solvent” effects on physical properties.     

Investigation of thermophysical properties of nanofluids containing poly(vinyl alcohol)-functionalized graphene

An experimental study was performed to evaluate the colloidal stability of water-based polyvinyl alcohol-functionalized few-layer graphene (water-based PVA–Gr) nanofluids and ethylene glycol-based polyvinyl alcohol-functionalized few-layer graphene (EG-based PVA–Gr) nanofluids. To this end, a liquid-phase exfoliation method was employed for mass production of graphene sheets (Gr). Then, a simple and novel method was introduced to do a direct functionalization of Gr with PVA. Surface functionality groups and morphology of PVA–Gr were analyzed by infrared spectroscopy, Raman spectroscopy and transmission electron microscopy. The results consistently confirmed the formation of PVA functionalities on Gr, while the structure of GNP has remained relatively intact. Then, UV–Vis was employed to investigate the stability of PVA–Gr in water and EG. The easily miscible PVA functionalities formed a great colloidal stability for Gr sheets. As a second criterion for having a promising coolant, thermophysical properties were measured experimentally. The thermal conductivity, density and viscosity of the nanofluids at concentrations of 0.025, 0.05 and 0.1 mass% were experimentally measured. As compared to the base fluid, the water-based PVA–Gr nanofluids show a significant enhancement at different conditions, like representing ~40% enhancement for 0.1 mass% at 40 °C. This simple and efficient procedure may play an important role for mass production of hydrophilic Gr, which be able to disperse in different solvents.     

Sorption of water by poly(vinyl alcohol)

The isotherms of water sorption by poly(vinyl alcohol) have been obtained by static sorption methods in a wide range of vapor activities. The properties of poly(vinyl alcohol) at various values of relative humidity have been studied by DSC, X-ray diffraction analysis, and mechanical testing. It has been shown that the correct thermodynamic analysis of sorption isotherms for sorbents with complex organization requires knowledge of their structural features. A method of allowing for the effect of osmotic pressure on the polymer sorption capacity is proposed. The pair interaction parameters estimated in this study are compared with the published data.     

Synthesis of isotactic star-shaped poly(vinyl alcohol)

Isotactic 6-armed star-shaped poly(vinyl alcohol) (PVA) with a narrow molecular weight distribution was successfully prepared by the living cationic polymerization of 6-armed star-shaped poly(tert-butyl vinyl ether) (PTBVE) and subsequent acidic ether cleavage. The PTBVE was synthesized using hexa(chloromethyl) melamine (HCMM) as a hexafunctional initiator and ZnI₂ or ZnCl₂ as an activator in toluene/MC (1/1 v/v) at −70 °C. A better living stability of PTBVE was obtained in the ZnCl₂ activator system. The number average molecular weight and the polydispersity index of the 6-armed star-shaped PTBVE polymerized with ZnCl₂ at −70 °C for 24 h were 156,000 g/mol and 1.47, respectively. The fraction of the mm sequence of the resulting PVA was 52%.     

Electrical conduction of poly(vinyl alcohol) films

PVA films (30–45 μm thickness) were prepared by casting. dc electrical measurements were done over the temperature range 293–353 K. Two different conduction mechanisms are suggested. The first one is ohmic and extends to 303 K. Above this temperature a space-charge-limited conduction mechanism, with protons as charge carriers, predominates. Dependences of the voltage-reversion current temperature and field were investigated and were attributed to a clean-up effect of charge carriers. The variance in the activation energy, calculated from the conductivity curves and from the mobility curves, led to a discussion of the origin of the charge carriers. No change in conductivity was observed for the PVA films irradiated with UV (of wavelength 365 nm) at 303 K, i.e., PVA is a photostable material under these conditions.     

Thermal decomposition products of poly(vinyl alcohol)

The thermal decomposition of poly(vinyl alcohol) is known to occur in two stages. In a study of first-stage decomposition, this polymer was pyrolyzed in vacuum at 240°C for 4 hr and the products were determined by using gas chromatography. The main products were water, aldehydes having the general formula and methyl ketones having the formula , where n = 0, 1, 2, 3, etc. Mechanisms for the formation of these carbonyl compounds are discussed.     

Dynamic mechanical and dielectrical properties of poly(vinyl alcohol) and poly(vinyl alcohol)‐based nanocomposites

In this article we report on the investigation of the dynamics of poly(vinyl alcohol) (PVA) and PVA‐based composite films by means of dielectric spectroscopy and dynamic mechanical thermal analysis. Once the characterization of pure PVA was done, we studied the effect of a nanostructured magnetic filler (nanosized CoFe₂O₄ particles homogeneously dispersed within a sulfonated polystyrene matrix) on the dynamics of PVA. Our results suggest that the α‐relaxation process, corresponding to the glass transition of PVA, is affected by the filler. The glass‐transition temperature of PVA increases with filler content up to compositions of around 10 wt %, probably as a result of polymer–filler interactions that reduce the polymer chain mobility. For filler contents higher than 10 wt %, the glass‐transition temperature of PVA decreases as a result of the absorption of water that causes a plasticizing effect. The β‐ and γ‐relaxation processes of PVA are not affected by the filler as stated from both dynamic mechanical thermal analysis and dielectric spectroscopy. Nevertheless, both relaxation processes are greatly affected by the moisture content. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 1968–1975, 2001     

Dilute solutions of poly(vinyl alcohol) derived from vinyl trifluoroacetate

The dilute-solution behavior of poly(vinyl alcohol) (PVA_VTFA), derived from vinyl trifluoroacetate, in water-dimethylsulfoxide (DMSO) mixtures was investigated. With solvent mixtures ranging from 10 to 20 vol % DMSO, the relation between the reduced viscosity η_sp/C and the polymer concentration C was linear for polymer concentrations above 0.2 g/dL, whereas in solutions in mixed solvents of other compositions the dependence was linear for polymer concentrations above 0.1 g/dL. The relation between the intrinsic viscosity [η] obtained for aqueous solutions of PVA_VTFA and the molecular weight M estimated from viscosity measurements in solutions of poly(vinyl acetate) (PVA_VTFA), obtained by acetylation of PVA_VTFA, was given by [η] = 7.34 × 10^?4 M^0.63. The value of [η] was greatest for the solvent mixture with 10 vol % DMSO and smallest for about 50 vol % DMSO, and Huggins constants k were smallest and greatest for these two cases, respectively. The turbidity of the solutions of low-molecular-weight PVA_VTFA, was higher than that of high-molecular-weight PVA_VTFA up to 30 vol % DMSO, and the reverse relation held for 40-70 vol % DMSO.     

Long branching in poly(vinyl acetate) and poly(vinyl alcohol). IV. Polymerization of vinyl trimethylacetate in the presence of crosslinked poly(vinyl acetate)

In order to clarify the grafting behavior of vinyl trimethylacetate (VTMAc) onto poly-(vinyl acetate) (PVAc), the polymerization of a radioactive VTMAc in the presence of a crosslinked PVAc gel was studied in accordance with the experimental technique described in the previous papers. It was found that, at 60°C, the grafting onto the main chain of PVAc takes place about 2.8 times as readily as that onto the acetyl side group on PVAc.     

Long branching in poly(vinyl acetate) and poly(vinyl alcohol). I. Crosslinking and crosslinking cleavage of poly(vinyl acetate)

A crosslinked network was formed by the reaction of partially saponified poly(vinyl acetate) and toluylene diisocyanate in benzene. The yield of gel was markedly dependent on the degree of saponification and the concentrations of polymer and diisocyanate. Crosslinked poly(vinyl alcohol) was obtained by treating the poly(vinyl acetate) with a catalytic amount of sodium hydroxide in methanol without any change of the urethane crosslinks. The crosslink based on the urethane linkage was quantitatively cleaved by acids, especially by hydrobromic acid, releasing polymers of the same molecular weight as the original.