离子交联聚氯乙烯的结构与性能

由氯乙烯/丙烯酸悬浮共聚合成了不同羧基含量的PVC树脂,采用溶液反应和熔融加工法制备离子交联PVC,对其结构和性能进行了研究.结果表明,共聚物中羧基主要以二聚体形式存在,用金属离子中和能形成部分络合结构;用Ca²⁺、Mg²⁺离子络合的羧基含量较高的VC/AA共聚物存在离子对聚集态结构;离子对含量、金属离子种类和增塑剂浓度影响离子聚集相的比例和稳定性,离子聚集具有热可逆性;离子交联使PVC的T_g、熔体粘度和回弹性提高.     

Improvement of Structural and Thermal Stabilities of PVC and Wood/PVC Composite by Zn and Pb Stearates,and Zeolite

Three different chemical stabilizers were introduced into neat PVC and a wood/PVC composite (containing 50 phr wood flour) to improve their thermal and structural stabilities. The changes in CIE yellowness index, polyene index, %wt loss, and decomposition temperature (T_d) were monitored. The effects of type and content of thermal stabilizers, thermal ageing time, and the presence of wood flour were our main interests. The experimental results suggested that the additions of Zn and Pb stearates into PVC and wood/PVC composite could improve the thermal stability of the PVC. At the test temperature of 177°C, the additions of Zn and Pb stearates could improve the thermal stabilities of PVC by retarding the upzipped reaction and by reducing the conjugated double bonds in PVC, Pb stearate being the most suitable for thermally stabilizing the PVC. Around the T_d range (～264°C), the addition of Zn stearate reduced the T_d value of PVC whereas that of Pb stearate had no effect on the change in T_d value. Zeolite loading could shift the T_d value of the PVC from 264 to 280°C. The addition of wood particles increased the polyene content and decreased the decomposition temperature of the PVC. The effect of wood flour on the thermal and structural changes of PVC overruled that of thermal stabilizer loading.     

Factors influencing the swelling and elution properties of poly(vinyl alcohol) cast gels

Swelling and elution properties of physically crosslinked poly(vinyl alcohol) (PVA) cast gels depend on the network structure of the PVA and crosslink, which is characterized by the size, number, and distribution of microcrystallites. Therefore, the swelling and elution ratios can be manipulated by adept control of the conditions adopted for the preparation of gels. Among the various factors that influence the formation of microcrystallites, the temperature and relative humidity at gelation play an important role. In addition, the size of gel is also a key factor that determines the network structure of gels. To this end, this study quantitatively evaluates the macroscopic properties of swelling and elution, and the microscopic properties of the network structures in disk‐shaped PVA cast gels of the same diameter prepared by casting different weights of PVA solution in the same dish. Although the drying speed can be controlled by adjusting the three processing parameters, namely, drying temperature, humidity, and cast weight, the changes in swelling and elution ratios, microcrystallite size, and crystallinity independently depended on each parameter. Regardless of the three factors, the swelling ratio was found to correlate strongly with the elution ratio. Optimum factors to minimize the elution ratio are discussed on the basis of the change in the network structures obtained by varying the preparatory conditions. Based on the results of the systematic analyses, this study proposes a method to control the elution ratio while retaining high water‐absorbance ability. Copyright © 2015 John Wiley & Sons, Ltd.     

Effects of microscale calcium carbonate and nanoscale calcium carbonate on the fusion,thermal, and mechanical characterizations of rigid poly(vinyl chloride)/calcium carbonate composites

A Haake torque rheometer equipped with an internal mixer has been used to study the influence of microscale calcium carbonate (micro‐CaCO₃) and nanoscale calcium carbonate (nano‐CaCO₃) on the fusion, thermal, and mechanical characteristics of rigid poly(vinyl chloride) (PVC)/micro‐CaCO₃ and PVC/nano‐CaCO₃ composites, respectively. The fusion characteristics discussed in this article include the fusion time, fusion temperature, fusion torque, and fusion percolation threshold (FPT). The fusion time, fusion temperature, and FPT of rigid PVC/calcium carbonate (CaCO₃) composites increase with an increase in the addition of micro‐CaCO₃ or nano‐CaCO₃. In contrast, the fusion torque of rigid PVC/CaCO₃ composites decreases with an increase in the addition of micro‐CaCO₃ or nano‐CaCO₃. The results of thermal analysis show that the first thermal degradation onset temperature (T_onset) of rigid PVC/micro‐CaCO₃ is 7.5 °C lower than that of PVC. Meanwhile, the glass‐transition temperature (T_g) of rigid PVC/micro‐CaCO₃ is similar to that of PVC. However, T_onset and T_g of PVC/nano‐CaCO₃ composites can be increased by up to 30 and 4.4%, respectively, via blending with 10 phr nano‐CaCO₃. Mechanical testing results for PVC/micro‐CaCO₃ composites with the addition of 5–15 phr micro‐CaCO₃ and PVC/nano‐CaCO₃ composites with the addition of 5–20 phr nano‐CaCO₃ are better than those of PVC. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 451–460, 2006     

接枝共聚法制备聚乙二醇(PEG)/聚乙烯醇(PVA)高分子固-固相变材料性能研究

用接枝共聚法将具有相变特征的聚乙二醇(PEG)接枝到具有较高熔点的聚乙烯醇(PVA)主链上,得到了系列性能稳定的PEG/PVA高分子固-固相转变材料,用DSC,WAXD和POM对其相变行为及形态结构进行了研究.结果表明,该材料呈现出可逆的固-固相转变特性;其结晶峰值温度和相变焓比纯PEG低,接枝率对相变温度和归一化相变焓影响不大;接枝率只影响结晶与熔融行为,不影响结晶结构.     

Development and characterization of reactive extruded PVC/polyacrylate blends

This paper describes a method to obtain polymer blends by the absorption of a liquid solution of monomer, initiator, and a crosslinking agent in suspension type porous poly(vinyl chloride) (PVC) particles, forming a dry blend. These PVC/monomer dry blends are reactively polymerized in a twin‐screw extruder to obtain the in situ polymerization in a melt state of various blends: PVC/poly(methyl methacrylate) (PVC/PMMA), PVC/poly(vinyl acetate) (PVC/PVAc), PVC/poly(butyl acrylate) (PVC/PBA) and PVC/poly(ethylhexyl acrylate) (PVC/PEHA). Physical PVC/PMMA blends were produced, and the properties of those blends are compared to reactive blends of similar compositions. Owing to the high polymerization temperature (180°C), the polymers formed in this reactive polymerization process have low molecular weight. These short polymer chains plasticize the PVC phase reducing the melt viscosity, glass transition and the static modulus. Reactive blends of PVC/PMMA and PVC/PVAc are more compatible than the reactive PVC/PBA and PVC/PEHA blends. Reactive PVC/PMMA and PVC/PVAc blends are transparent, form single phase morphology, have single glass transition temperature (T_g), and show mechanical properties that are not inferior than that of neat PVC. Reactive PVC/PBA and PVC/PEHA blends are incompatible and two discrete phases are observed in each blend. However, those blends exhibit single glass transition owing to low content of the dispersed phase particles, which is probably too low to be detected by dynamic mechanical thermal analysis (DMTA) as a separate T_g value. The reactive PVC/PEHA show exceptional high elongation at break (～90%) owing to energy absorption optimized at this dispersed particle size (0.2–0.8 µm). Copyright © 2005 John Wiley & Sons, Ltd.     

Preparation of a Conducting Flexible Material from Silane Coupling Agent and Hydroxyl Terminated Polybutadiene Rubber by Hydrolysis and Condensation

Abstract

Synthesis and characterization of a flexible polymer produced from silane coupling agent (SCA) and hydroxyl terminated polybutadiene (HTPB) were performed. Mechanical properties of chemically and electrochemically prepared conducting composites synthesized from this polymer were investigated. Conductivities of the composites were also measured. Polypyrrole enhanced the mechanical properties of the chemically prepared conducting composite. Doping with iodine greatly changed the conductivity of the composite. However, the change in mechanical properties and the conductivities of the electrochemically prepared composite were not as significant when compared with the electrochemically prepared polypyrrole. Among the composites, a chemically prepared composite was highly flexible like rubber. However, the electrochemically produced composite possesses two orders of magnitude higher conductivity. Also, this composite revealed higher tensile strength and elasticity with respect to pristine polypyrrole.     

化学交联聚氯乙烯树脂的合成和结构

研究了氯乙烯/交联单体悬浮共聚时,交联单体种类、浓度和聚合温度对化学交联聚氯乙烯树脂结构的影响.对于氯乙烯/邻苯二甲酸二烯丙基酯(VC/DAP)悬浮共聚体系,凝胶含量和凝胶交联密度随DAP起始浓度的增加而增大;DAP浓度相同时,凝胶含量和凝胶交联密度随聚合温度上升而下降;当凝胶含量较高时,分子链物理缠结对凝胶交联密度有较大贡献,凝胶交联密度随凝胶含量增加而快速上升.在相同交联单体浓度下,氯乙烯/马来酸二烯丙基酯(VC/DAM)共聚物的凝胶含量最大,VC/DAP共聚物次之,氯乙烯/乙二醇二甲基丙烯酸酯(VC/EGDMA)共聚物最小,这是由于DAM单体的竞聚率小于1,且含有马来酸双键,EGDMA单体的竞聚率远大于1.     

Preparation and characterization of a nanoscale poly(vinyl alcohol) fiber aggregate produced by an electrospinning method

Nanoscale poly(vinyl alcohol) (PVA) fiber (100–500 nm) aggregates were prepared with an electrospinning technique. Additionally, a chemical crosslinking method was used to crosslink the nanoscale PVA fiber aggregates. Differential scanning calorimetry, wide‐angle X‐ray diffraction, and scanning electron microscopy techniques were employed to characterize the PVA fiber aggregates. The different crosslinking densities of the PVA fiber aggregates were obtained through the control of the weight percentage of glyoxal to PVA. The crosslinking densities due to heat treatment and chemical crosslinking were studied. The influence of heat treatment could be neglected in contrast to chemical crosslinking when the curing temperature was 120 °C. The primary factor that affected the crosslinking density was the volume of the chemical crosslinking agent. The results showed that the properly crosslinked PVA fiber aggregates had better antiwater solubility and mechanical properties than the noncrosslinked PVA fiber aggregates. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1261–1268, 2002     

Terpyridine‐modified poly(vinyl chloride): Possibilities for supramolecular grafting and crosslinking

Commercially available poly(vinyl chloride) (PVC) was covalently modified with terpyridine supramolecular binding units in a two‐step reaction. First, PVC was modified with aromatic thiols to introduce OH functionalities into the polymer backbone, which were subsequently reacted with an isocyanate‐functionalized terpyridine binding unit. The resulting functionalized material contained metal‐ion binding sites, which could be used for grafting and crosslinking reactions. A grafting experiment was performed with a small organic terpyridine ligand. The complexation of the modified PVC with several transition‐metal ions was studied with ultraviolet–visible spectroscopy and gel permeation chromatography. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2964–2973, 2003     

Synthesis and characterization of poly(N‐vinyl formamide) hydrogels—A potential alternative to polyacrylamide hydrogels

The synthesis and characterization of solution‐cast, molded gels of N‐vinyl formamide (NVF) has not been previously reported even though NVF is an isomer of acrylamide (AAm) and polyacrylamide (PAAm) hydrogels have many commercial applications. Aqueous NVF solutions were cross‐linked into gels using a novel cross‐linker, 2‐(N‐vinylformamido)ethylether, and the thermally‐activated initiator VA‐044. For a given formulation, PNVF gels swell up to twice that of PAAm gels cross‐linked with N,N′‐methylenebisacrylamide. From swelling and compression measurements, PNVF gels were found to be more hydrophilic than PAAm gels. Flory‐Huggins solubility parameters were χ = 0.38?₂ + 0.48 for PNVF and χ = 0.31?₂ + 0.49 for PAAm, where ?₂ is the polymer volume fraction. The shear moduli for PNVF and PAAm scale with ? and ? respectively, consistent with good solvent behavior, also suggesting PNVF is more hydrophilic than PAAm. Similarity of mechanical properties for both gels as a function of ?₂ suggests that network structures of PNVF and PAAm gels are similar. Fracture strains of both gels declined with ?₂ by the same linear function while fracture stresses were about 500 kPa regardless of formulation. Since NVF is a liquid monomer, less toxic than AAm and can be hydrolyzed to a cationic form, PNVF gels could become technologically significant. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

The effects of dioctyl phthalate plasticization on the morphology and thermal,mechanical, and rheological properties of chemical crosslinked polylactide

The tensile strength and thermal stability of polylactide (PLA) were significantly improved through chemical crosslinking. However, it became much more rigid and brittle. To obtain a material with good thermal stability and enhanced ability to plastic deformation, chemical crosslinked PLA with 0.5 wt % triallyl isocyanurate and 0.5 wt % dicumyl peroxide was blended with different contents of dioctyl phthalate (DOP). The advantage of using DOP is that it does not crystallize, has low glass transition temperature, and is miscible with PLA. The morphology and the thermal and mechanical properties of the crosslinked PLA and the blends of crosslinked PLA with various contents of DOP were investigated by means of scanning electron microscope, differential scanning calorimetry, tensile test, and dynamic mechanical analysis. The rheological properties of samples were also explored by using a capillary rheometer. The results showed that the DOP was an effective plasticizer for the chemical crosslinked PLA, resulting in a significantly decreased T_g, lower yield stress, and improved elongation at break. The plasticization effect was enhanced by adding higher DOP content. In addition, the DOP enhanced the crystallinity of crosslinked PLA, and all the crosslinked samples showed better heat stability than neat PLA. The apparent viscosity of the blends decreased with the increase of DOP content and a phase separation occurred when the content of DOP exceeded 12.5 wt %. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1136–1145, 2009     

Effects of incorporation of modified silica nanoparticles on the mechanical and thermal properties of PMMA

Silica nanoparticles of various sizes have been incorporated by melt compounding in a poly(methyl methacrylate) (PMMA) matrix to enhance its thermal and mechanical properties. In order to improve nanoparticles dispersion, PMMA grafted particles have been prepared by atom transfer radical polymerization (ATRP) from well-defined silica nanoparticles. This strategy was expected to ensure compatibility between both components of the PMMA nanocomposites. TEM analysis have been performed to evaluate the nanosilica dispersion whereas modified and non-modified silica/PMMA nanocomposites thermal stability and mechanical properties have been investigated by both thermogravimetric and dynamical mechanical analysis.     

Ammonium persulphate promoted synthesis of polyethylene glycol entrapped potassium tribromide and its application in acylation and bromination of some selective organic compounds

In this study, a new method of synthesis of polyethylene glycol supported potassium tribromide (PEG KBr3) and its application in acylation and bromination reactions are reported. Ammonium persulphate oxidizes KBr to the corresponding tribromide which is entrapped by polyethylene glycol leading to stable PEG KBr3. The reagent is proved to be highly efficient for the acylation of variety of alcohols and bromination of activated aromatic substrates. Themethod is a mild, one pot reaction and involves no use of toxic reagents.     

氯化镁/聚乙二醇复配增塑剂热塑加工聚乙烯醇

采用氯化镁和聚乙二醇对聚乙烯醇(PVA)进行增塑改性, 并利用熔融加工方法制备了PVA薄膜.采用傅里叶变换红外光谱(FTIR)、X射线衍射(XRD)、差示扫描量热分析(DSC)和热重分析(TGA)方法研究了由氯化镁和聚乙二醇组成的复配增塑剂与PVA的相互作用及复配增塑剂对PVA结晶性能、热性能和力学性能的影响.结果表明, 由氯化镁和聚乙二醇组成的复配增塑剂能有效地破坏PVA自身的氢键, 降低PVA的结晶度和熔融温度, 提高PVA的热稳定性并扩展PVA的热塑加工温度窗口.由复配增塑剂通过热塑加工方法制得的PVA薄膜具有较好的力学性能, 拉伸强度为31 MPa, 断裂伸长率为466%.     

A simple and green route to transparent boron nitride/PVA nanocomposites with significantly improved mechanical and thermal properties

A simple and green method is developed to prepare hexagonal boron nitride(h-BN)/poly(vinyl alcohol) (PVA) nanocomposites by using water as a common solvent of h-BN nanosheets and PVA.The obtained h-BN/PVA nanocomposites are highly transparent,and have significantly improved mechanical and thermal properties.They may outperform nano-clay and nano-alumina/PVA nanocomposites as flexible optoelectronic devices,optical windows and heat-releasing materials operated in oxidative or corrosive environment.     

Viscoelastic behaviors and molecular motions of highly syndiotactic poly(vinyl alcohol) fibers

The viscoelastic behavior and molecular motion of highly syndiotactic poly(vinyl alcohol) (S‐PVA) fibers with a dyad syndiotacticity (r) of 69% were studied by dynamic mechanical thermal analysis and wide‐angle X‐ray diffraction and compared with those of atactic poly(vinyl alcohol) (A‐PVA) fibers with r = 54%. The β_c dispersion, based on the molecular motion of the chain molecules in the crystalline regions, was observed for A‐PVA around 120–140 °C, and the only primary (α_c) dispersion was observed for S‐PVA around 180 °C. The thermal expansion coefficients for the a and c axes of the A‐PVA crystal changed discontinuously around 120 °C, which corresponded to the β_c dispersion. For S‐PVA, the coefficient for the (002) plane changed discontinuously around 100 °C, similarly to A‐PVA, but that for the (100) plane remained unchanged between 20 and 220 °C. These results showed that the intermolecular hydrogen bonding of S‐PVA was stronger in the direction of the a axis than in the other directions, suppressing the β_c dispersion. The storage modulus and thermal expansion coefficient of the (020) plane (molecular axis) of S‐PVA decreased markedly around 180 °C, and this indicated that the α_c dispersion was due to the torsional motion of the molecular chains in the crystalline regions. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 800–808, 2004     

The changing anisotropy character of weathered low-density polyethylene films recognized by quasi-static and ultrasonic mechanical testing

Unstabilised polyethylene films used for greenhouse covering have been exposed outdoors under the severe weathering conditions in the Sahara.The chemical and the morphological changes followed by infrared spectroscopy and by differential scanning calorimetry (DSC) show that the damages caused by oxidation to the tie molecules increase crystallinity and lead to a severe deterioration of the mechanical properties.The mechanical aspect of aging was studied by using standard quasi-static (QS) tensile testing measurements and by a non-destructive method based on ultrasound (US). This latter technique consists of measuring velocities and attenuations of ultrasonic waves propagating in several directions in the film plane.Both methods show the changing anisotropic character of the films with aging. The transverse direction has been found to be the principal axis of anisotropy consequently to a little more significant chain orientation in this direction acquired during processing.The connection between the chemical aspect of aging and the mechanical one (i.e. the viscoelastic properties and the anisotropic character) is discussed.     

Water resistance, mechanical properties and biodegradability of methylated-cornstarch/poly(vinyl alcohol) blend film

The main shortcomings of biodegradable starch/poly(vinyl alcohol) (PVA) film are hydrophilicity and poor mechanical properties. With an aim to overcome these disadvantages, cornstarch was methylated and blend films were prepared by mixing methylated-cornstarch (MCS) with PVA. The mechanical properties, water resistance and biodegradability of the MCS/PVA film were investigated. It was found that MCS/PVA film had higher water resistance than the native starch/PVA film. However, the water resistance of MCS/PVA films did not have significant difference with the increase in the degree of substitution (DS) of the methylated starch from 0.096 to 0.864. Enzymatic, microbiological and soil burial biodegradation results indicated that the biodegradability of the MCS/PVA film strongly depended on the starch proportion in the film matrix. The degradation rate of starch in the starch/PVA film was hindered by blending starch with PVA. Both tensile strength and percent elongation at break of the MCS/PVA film were improved as DS of the methylated starch increased. Conversely, increasing the methylated starch proportion in film matrix deteriorated both tensile strength and percent elongation at break of the film.