Helix‐sense‐selective copolymerization of triphenylmethyl methacrylate with chiral 2‐isopropenyl‐4‐phenyl‐2‐oxazoline

The asymmetric induction leading to a one‐handed helix was investigated in the anionic and radical copolymerization of triphenylmethyl methacrylate (TrMA) and (S)‐2‐isopropenyl‐4‐phenyl‐2‐oxazoline ((S)‐IPO), and highly isotactic copolymers with a reasonable optical activity were obtained. In the anionic copolymerization, the optical activity of the obtained copolymers depended on the polarity of solvents, and a highly optically active copolymer was produced in the copolymerization in toluene. The chiral oxazoline monomer functioned not only as a comonomer but also as a chiral ligand to endow the polymer with large negative optical rotation in the copolymerization with TrMA. The copolymers with small positive optical rotation were obtained in THF, indicating that IPO unit may work only as the chiral monomer that dictates the helical sense via copolymerization with TrMA. The isotacticity of the obtained copolymers depended on the contents of TrMA units in the copolymers, but was almost independent of the solvent for copolymerization. In the radical copolymerization, the obtained copolymers exhibited small optical activities. It seemed that the chiral monomer cannot induce one‐handed helical structure of TrMA sequences even if the sequences probably have a high isotacticity. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 441–447     

Styrene/1,3‐butadiene copolymerization by C2‐symmetric group 4 metallocenes based catalysts

C₂‐symmetric group 4 metallocenes based catalysts (rac‐[CH₂(3‐tert‐butyl‐1‐indenyl)₂]ZrCl₂ (1) , rac‐[CH₂(1‐indenyl)₂]ZrCl₂ (2) and rac‐[CH₂(3‐tert‐butyl‐1‐indenyl)₂]TiCl₂ (3) ) are able to copolymerize styrene and 1,3‐butadiene, to give products with high molecular weight. In agreement with symmetry properties of metallocene precatalysts, styrene homosequences are in isotactic arrangements. Full determination of microstructure of copolymers was obtained by ¹³C NMR and FTIR analysis and it reveals that insertion of butadiene on styrene chain‐end happens prevailingly with 1,4‐trans configuration. In the butadiene homosequences, using zirconocene‐based catalysts, the 1,4‐trans arrangement is favored over 1,4‐cis, but the latter is prevailing in the presence of titanocene (3) . Diad composition analysis of the copolymers makes possible to estimate the reactivity ratios of copolymerization: zirconocenes (1) and (2) produced copolymers having r₁ × r₂ = 0.5 and 3.0, respectively (where 1 refers to styrene and 2 to butadiene); while titanocene (3) gave tendencially blocky styrene–butadiene copolymers (r₁ × r₂ = 8.5). The copolymers do not exhibit crystallinity, even when they contain a high molar fraction of styrene. Probably, comonomer homosequences are too short to crystallize (n_s = 16, in the copolymer at highest styrene molar fraction). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1476–1487, 2008     

Dilute solution properties of poly(α-methylstyrene–ethylene) “regular” sequence copolymers

“Regular” sequence copolymers having the structure {[? CH₂? C(CH₃)(C₆H₅)? ]_m(CH₂? CH₂)_n}_p with relatively small values of m and n were prepared by means of “living” polymerization techniques. The intrinsic viscosities of fractions of these copolymers were obtained in various solvents including a theta solvent. The molecular weights of these fractions were determined by the Archibald ultracentrifugal method. The results show that the intrinsic viscosity–molecular weight relations of the regular sequence copolymers are affected not only by the average composition of the copolymer, but also by the sequence length in the copolymer molecule. It is suggested that the effective conformation of a chain element in the copolymer is not always the same as that in the homopolymer.     

Random copolymer of butadiene and propylene prepared with TiCl4–Et3Al–phosgene catalyst

The copolymerization of butadiene and propylene was investigated. It was found that the catalyst system of TiCl₄–Et₃Al–COCl₂ yields a random copolymer of high molecular weight with a small amount of gel polymer above room temperature. Tetrachloroethylene was a good solvent for the production of high polymer containing a high proportion of propylene units in high yield. The fractionation and the analysis of degradation experiments of copolymer indicate that the copolymer is of random distribution of propylene units in the copolymer. However, the monomer reactivity ratios, r_BD = 6.36 and r_Pr = 0.42, suggest some degree of blocked character. The properties of the copolymer were superior to those of cis-1,4–polybutadiene, especially in resistance to thermal aging.     

Copolymerization of isoprene with ethylene catalyzed by cationic half‐sandwich fluorenyl scandium catalysts

Isoprene polymerization and copolymerization with ethylene can be carried out by using cationic half‐sandwich fluorenyl scandium catalysts in situ generated from half‐sandwich fluorenyl scandium dialkyl complexes Flu'Sc(CH₂SiMe₃)₂(THF)_n, activator, and AlⁱBu₃ under mild conditions. In the isoprene polymerization, all of these cationic half‐sandwich fluorenyl scandium catalysts exhibit high activities (up to 1.89 × 10⁷ g/mol_Sc h) and mainly cis?1,4 selectivities (up to 93%) under similar conditions. In contrast, these catalysts showed different activities and regio‐/stereoselectivities being significantly dependent on the substituents of the fluorenyl ligands in the copolymerization of isoprene with ethylene under an atmosphere of ethylene (1 atm) at room temperature, affording the random copolymers with a wide range of cis?1,4‐isoprene contents (IP content: 64 ? 97%, cis?1,4‐IP units: 65 ? 79%) or almost alternating copolymers containing mainly 3,4‐IP‐alt‐E or/and cis?1,4‐IP‐alt‐E sequences. Moreover, novel high performance polymers have been prepared via selective epoxidation of the vinyl groups of the 1,4‐isoprene units in the IP‐E copolymers. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2898–2907     

Effects of mixed aqueous‐organic solvents on the rate of intramolecular carboxylic group‐catalyzed cleavage of N‐(4′‐methoxyphenyl)phthalamic acid

Kinetic study on the cleavage of N‐(4′‐methoxyphenyl)phthalamic acid (NMPPAH) in mixed H₂O‐CH₃CN and H₂O‐1,4‐dioxan solvents containing 0.05 M HCl reveals the formation of phthalic anhydride (PAn)/phthalic acid (PA) as the sole or major product. Pseudo first‐order rate constants (k₁) for the conversion of NMPPAH to PAn decrease nonlinearly from 60.4 × 10^?5 to 2.64 × 10^?5 s^?1 with the increase in the contents of 1,4‐dioxan from 10 to 80% v/v in mixed aqueous solvents. The rate of cleavage of NMPPAH in mixed H₂O‐CH₃CN solvents at ≥50% v/v CH₃CN follows an irreversible consecutive reaction path: NMPPAH PA. The values of k₁ are larger in H₂O‐CH₃CN than in H₂O‐1,4‐dioxan solvents. © 2004 Wiley Periodicals, Inc. Int J Chem Kinet 36: 316–325, 2004     

Cationic copolymerization of tetrahydrofuran with ethylene oxide in the presence of diols: Composition,microstructure, and properties of copolymers

Cationic copolymerization of tetrahydrofuran (THF) with ethylene oxide (EO) in the presence of diols leads to dihydroxy terminated telechelic copolymers. In the present article the influence of copolymerization conditions on the copolymer structure was studied in view of conclusions derived from studies of copolymerization kinetics and mechanism. It was shown that according to established copolymerization mechanism, the number average molecular weights increase linearly with conversion up to M_n ≅ 2500, hydroxyl end groups are bound exclusively to EO units and copolymers are composed of [EO]–[THF]_y segments. Microstructure of copolymers may be to some extent regulated by changing reaction conditions. Some physical properties of copolymers also were studied. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3455–3463, 1999     

Features of styrene copolymerization with sodium p-styrenesulfonate in solvents of different polarities

The copolymerization of sodium p-styrenesulfonate with styrene is studied in solvents that form homogeneous solutions with mixtures of these monomers and differ in polarity: DMFA, a mixture of 1,4-dioxane with DMF, DMSO, and a DMSO-water mixture. It is shown that the diagrams of the copolymer composition depend on the type of solvent and that their shapes do not obey the Mayo-Lewis model. The copolymers become substantially enriched with styrene units during an increase in the solvent polarity. The main cause of deviation from the classical scheme of binary copolymerization is the selective solvation of growing macroradicals with styrene. This effect becomes more pronounced during an increase in the solvent polarity and a decrease in its dissolving ability with respect to polystyrene and during polymer separation into a heterophase. This conclusion is confirmed by the dependence of the copolymer composition on the initiator concentration.     

Synthesis,Antimicrobial Activity and Semi-conducting Properties of Novel 2-(4-Chloro-1-Naphtyloxy)-2-Oxoethyl Methacrylate with 2-(Diethylamino)Ethyl Methacrylate Copolymers

The free-radical initiated copolymerization of 2-(4-chloro-1-naphtyloxy)-2-oxoethyl methacrylate (ClNOEMA) with 2-(diethylamino) ethyl methacrylate (DEAEMA) was carried out in 1,4-dioxane solution at 70 ± 1°C using 2,2′-azobisisobutyronitrile (AIBN) as an initiator with different monomer-to-monomer ratios (ranging from 0.15 to 0.85) in the feed. The copolymer composition obtained by elemental analysis led to the determination of reactivity ratios employing Fineman-Ross (F-R) and Kelen-Tüdös (KT) linearization methods. These parameters were also estimated using a non-linear computational fitting procedure, known as reactivity ratios error in variable model (RREVM). The prepared homo and copolymers were tested for their antimicrobial activity against bacteria and yeast. These copolymers have been converted into novel salts by reaction with the iodemethane (CH₃I). The copolymers and the corresponding salts have been characterized fully by a range of spectroscopic analysis techniques. The electrical conductivity dependence of temperature of the polymers were measured and the polymers exhibit the semi-conducting behavior, confirming that the electrical conductivity increases with increasing temperature. The poly(CINOEMA-co-DEAEMA) polymer doped by CH₃I for 15 min shows the highest conductivity. The optical band gap, activation energy and room temperature conductivity values of these polymers were obtained. These electronic parameters suggest that the poly(CINOEMA-co-DEAEMA)s doped by CH₃I for 15 min is an organic semiconductor with the thermally activated conduction mechanism.     

Radical copolymerization of chlorotrifluoroethylene with 4‐bromo‐3,3,4,4‐tetrafluorobut‐1‐ene

The radical copolymerization of chlorotrifluoroethylene (CTFE) with 3,3,4,4‐tetrafluoro‐4‐bromobut‐1‐ene (BTFB) initiated by tert‐butylperoxypivalate is presented. The microstructures of the obtained copolymers are determined by means of NMR spectroscopies and elemental analysis and show that random copolymers were obtained. A wide range of poly(CTFE‐co‐BTFB) copolymers is synthesized, containing from 17 to 89 mol % of CTFE. In all the cases, CTFE is the less reactive of both comonomers. T_d^10% values, ranging from 163 up to 359 °C, are dependent on the BTFB content. These variations of thermal property are attributed to the increase in the number of C‐H and C‐Br bonds breakdown when the BTFB molar percentage in the copolymer is higher. T_g values range from 19 to 39 °C and a decreasing trend is observed when increasing the amount of BTFB in the copolymer. This observation arises from the higher flexibility of the copolymer when increasing the number of fluorobrominated lateral chains. These original fluoropolymers bearing reactive pendant bromo groups are suitable candidates for various applications. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1714–1720     

Investigation of 2,3'-Biquinolyl. 11. Regioselectivity in the Hydroxylation of 1-Alkyl-3-(2-quinolyl)quinolinium Halides

The hydroxylation of 1-alkyl-3-(2-quinolyl)quinolinium halides by an alkaline solution of K₃[Fe(CN)₆] in aqueous 1,4-dioxane leads to a mixture of 1-alkyl-3-(2-quinolyl)-1,2-dihydro-2-quinolones and 1-alkyl-3-(2-quinolyl)-1,4-dihydro-4-quinolones with predominance of the former. The use of the system of K₃[Fe(CN)₆]/Mg(OH)₂ in aqueous 1,4-dioxane leads to the regiospecific formation of 1-alkyl-3-(2-quinolyl)-1,4-dihydro-4-quinolones.     

Co60 γ-radiation-induced copolymerization of ethylene and carbon monoxide

The γ-radiation-induced free-radical copolymerization of ethylene and CO has been investigated over a wide range of pressure, initial gas composition, radiation intensity, and temperature. At 20°C., concentrations of CO up to 1% retard the polymerization of ethylene. Above this concentration the rate reaches a maximum between 27.5 and 39.2% CO and then decreases. The copolymer composition increases only from 40 to 50% CO when the gas mixture is varied from 5 to 90% CO. A relatively constant reactivity ratio is obtained at 20°C., indicating that CO adds 23.6 times as fast as an ethylene monomer to an ethylene free-radical chain end. For a 50% CO gas mixture, the above value of 23.6 and the copolymerization rate decrease with increasing temperature to 200°C. The kinetic data indicate a temperature-dependent depropagation reaction. Infrared examination of copolymers indicates a polyketone structure containing ? CH₂? CH₂? and ? CO? units. The crystalline melting point increases rapidly from 111 to 242°C., as the CO concentration in the copolymer increases from 27 to 50%. Molecular weight of copolymer formed at 20°C. increased with increasing CO, indicating M?_n values >20,000. Increasing reaction temperature results in decreasing molecular weight. Onset of decomposition for a 50% CO copolymer was measured at ≈250°C.     

Facile synthesis of blocky styrene(1,3)‐butadiene copolymers having stereoregular monomeric sequences

Half titanocenes (CpCH₂CH₂O)TiCl₂ 1 and (CpCH₂CH₂ OCH₃)TiCl₃ 2 , activated by methylaluminoxane are tested in styrene–1,3‐butadiene copolymerization. The titanocene 1 is able to copolymerize styrene and 1,3‐butadiene, with a facile procedure, to give products with high molecular weight. The analysis of microstructure by ¹³C‐NMR reveals that the styrene homosequences in copolymers are in syndiotactic arrangement, while the butadiene homosequences are, prevailingly, in 1,4‐cis configuration, according with behavior of 1 in the homopolymerizations of styrene and 1,3‐butadiene, respectively. The reactivity ratios of copolymerization are estimated by diad composition analysis. All obtained copolymers have r₁ × r₂ values much larger than 1, indicating blocky nature of homosequences. The structural characterization by wide‐angle X‐ray powder diffraction and differential scanning calorimetry indicates that all copolymers are crystalline, with T_m varying from 171 to 239 °C, depending on the styrene content. The titanocene 2 did not succeed in styrene–1,3‐butadiene copolymerization, giving rise to a blend of homopolymers. Compounds 1 and 2 were also tested in the polymerization of several conjugated dienes, and the obtained results were very useful to rationalize the behavior of both catalysts in the copolymerization of styrene and butadiene. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 815–822, 2010     

Effect of lithium perchlorate on the spontaneous copolymerization of 4‐vinylpyridine with various electron‐rich vinyl monomers

The spontaneous copolymerization of 4‐vinylpyridine (4‐VP) activated with lithium perchlorate (LiClO₄) with various electron rich monomers (p‐methoxystyrene, MeOSt; p‐methylstyrene, MeSt; styrene, St) was investigated in various solvent systems at 75°C. Increasing the LiClO₄ concentration and the nucleophilicity of the electron rich monomer increased the copolymer yields. Both ¹H‐NMR and elemental analysis confirmed the almost 1:1 copolymer structure for VP/MeOSt system which possessed high molecular weight and narrow polydispersity (PDI). Compared to 4‐VP activated with zinc chloride, LiClO₄ systems showed slightly lower yields and much narrower PDI. We also investigated the spontaneous copolymerization of 4‐VP activated with various protic acids in the reaction with various electron rich comonomers. However, generally protic salt forms showed less solubility in organic solvents and showed low molecular weight polymer products with low yields. The proposed initiation mechanism exhibits the formation of a σ‐bond between the β‐carbons of the two donor‐acceptor monomers, creating the 1,4‐tetramethylene biradical intermediate initiating the copolymerization. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1709–1716, 1999     

1,4‐Dimethyl‐1,4‐diazo­nia­bicyclo­[2.2.2]octane diiodide acetonitrile solvate

In the crystal structure of the title compound, C₈H₁₈N₂²⁺·2I⁻·CH₃CN, the dication lies on a mirror plane containing the mol­ecular dication threefold axis. The structure displays C—H⋯I inter­actions between H atoms of the 1,4‐dimethyl‐1,4‐diazo­nia­bicyclo­[2.2.2]octane dication and the iodide anions. The H⋯I distances are in the range 2.96–3.18 (4) Å. The dications pack forming channels along the b axis, which contain the iodide anions and acetonitrile solvent mol­ecules.     

Novel Copolymers of Vinyl Acetate and Some Ring‐Substituted 2‐Phenyl‐1,1‐dicyanoethylenes

Electrophilic trisubstituted ethylene monomers, some ring‐substituted 2‐phenyl‐1,1‐dicyanoethylenes, RC₆H₄CH?C(CN)₂ (where R is 3‐Br, 4‐CH₃O; 5‐Br, 2‐CH₃O; 4‐Cl, 3‐NO₂; 5‐Cl, 2‐NO₂; 2‐CN, 3‐CN, 4‐CN, and 4‐(CH₃)₂N), were synthesized by piperidine catalyzed Knoevenagel condensation of ring‐substituted benzaldehydes and malononitrile, and characterized by CHN elemental analysis, IR, ¹H‐ and ¹³C‐NMR. Novel copolymers of the ethylenes and vinyl acetate were prepared at equimolar monomer feed composition by solution copolymerization in the presence of a radical initiator (ABCN) at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H and ¹³C‐NMR, GPC, DSC, and TGA. High T _g of the copolymers, in comparison with that of polyvinyl acetate, indicates a substantial decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. The gravimetric analysis indicated that the copolymers decompose in the 190–800°C range.     

Synthesis of methallylic monomers bearing ammonium side‐groups and their radical copolymerization with chlorotrifluoroethylene

Methallylic monomers bearing triethyl or 4‐diazabicyclo[2.2.2]octane (DABCO) ammonium side‐groups are prepared and copolymerized with chlorotrifluoroethylene (CTFE). First, three different monomers are synthesized from chloro‐2‐methylprop‐1‐ene or 3‐chloro‐2‐chloromethylprop‐1‐ene in fair to good yields (57–95%). Then, several parameters (initiators, aqueous or solution processes, temperature) of the radical copolymerization of these monomers with chlorotrifluoroethylene are investigated. Various initiators are tested in the presence of ammonium perfluorooctanoate (APFO) as water‐soluble surfactant, and tert‐butyl peroxypivalate/APFO leads to the best results in a mixed solvent (H₂O/CH₃CN/C₄F₅H₅). In all experiments, the radical copolymerization shows that CTFE is more reactive than the methallylic monomer as evidenced by the characterization of poly(CTFE‐co‐M) copolymer by nuclear magnetic resonance spectroscopy and elemental analysis. Thermal degradation of these copolymers by thermogravimetric analyses indicates that the copolymers are stable up to 180 °C without any degradation and have a T_d,10% above 300 °C. Finally, their ionic exchange capacities range between 0.94 and 1.69 meq g^?1. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1721–1729     

Basicity of some aliphatic amines in mixed H2O?CH3CN solvents

The values of pK_a^ms (K_a^ms represents ionization constant of conjugate acid of amine base in mixed water–acetonitrile solvent) for all amines, except for charged amine bases, show a mild decrease (ca. 0.1–0.4 pK units) with the increase in CH₃CN content from 2 to ∼60% v/v. However, the pK_a^ms values at 70% v/v CH₃CN become nearly equal or slightly larger (by ≤0.7 pK units) than the corresponding pK_a^ms at 2% v/v CH₃CN for all neutral and charged amines. The values of pK_a^ms for phenol increase from 10.17 to 13.38 with the increase in the content of CH₃CN from 2 to 70% v/v in mixed aqueous solvent. Taft reaction constants, ρ*, obtained from the plots of pK_a^ms against ∑σ* for primary and secondary amines decrease by ca. 0.8 ρ* units with the increase in the CH₃CN content from 2 to 70% v/v. The values of pK_a^ms show an empirical linear relationship with the corresponding values of pK_a^w (where pK_a^w represents the pK_a obtained in aqueous solvent containing 2% v/v CH₃CN), which allows the estimation of a pK_a in mixed H₂O CH₃CN solvents from that in water. © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 32: 146–152, 2000     

Titanyl Acetylacetonate as an Efficient Catalyst for Regioselective 1,2‐Reduction of α,β‐Unsaturated Carbonyl Compounds and Conversion of α‐Diketones & Acyloins to Vicinal Diols with Sodium Borohydride

α,β‐Unsaturated aldehydes and ketones were reduced readily and exclusively to their corresponding allylic alcohols with NaBH₄ and catalytic amounts of titanyl acetylacetonate at room temperature. Reduction reactions were carried out in CH₃CN or THF. This reducing system was also efficient for the reduction of α‐diketones and acyloins to their corresponding vicinal diols in CH₃CN.     

Half‐lanthanocene/dialkylmagnesium‐mediated coordinative chain transfer copolymerization of styrene and hexene

The Cp*La(BH₄)₂(THF)₂/n‐butylethylmagnesium (BEM) catalytic system has been assessed for the coordinative chain transfer copolymerization of styrene and 1‐hexene. Poly(styrene‐co‐hexene) statistical copolymers were obtained with number‐average molecular weight up to 7600 g/mol, PDI around 1.4 and 1.5 and up to 23% hexene content. The occurence of chain transfer reactions in the presence of excess BEM is established in the course of the statistical copolymerization. Thanks to this transfer process, the quantity of 1‐hexene in the copolymer is increased by a factor of about 3 for high ratio of hexene in the feed, extending the range of our concept of a chain transfer induced control of the composition of statistical copolymers to poly(styrene‐co‐hexene) copolymers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011