Terpolymerization of maleic anhydride, trans-stilbene and acrylic monomers

The results of radical terpolymerization of maleic anhydride (MA), trans-stilbene (Stb) and acrylic monomers (n-butyl methacrylate (BMA) and acrylonitrile (AN)) as acceptor-donor-acceptor monomer systems are discussed. The structure and composition of terpolymers are determined by chemical (acid number for MA units) and elemental (content of N for AN units and O for BMA units) analyses, as well as by FTIR spectroscopy through recorded analytical absorption bands for MA (1770 and 1845 cm⁻¹), Stb (864 cm⁻¹) and BMA (1730 cm⁻¹) units, respectively. The considerable change in the terpolymer compositions is observed when a strong acceptor MA is substituted with BMA (or AN), having comparatively low acceptor character in the system studied. Copolymerization constants for the MA ? Stb complex and acrylic comonomers pairs are determined according to the modified Kelen-Tüdös equation. Obtained results show that at the chosen ratios of comonomers, radical terpolymerization proceeded mainly by a true “complex” mechanism in the stage of near binary copolymerization of MA ? Stb complexed monomers with free BMA (or AN). The kinetics of terpolymerization and terpolymer compositions are studied in the low and high conversion stages. It is shown that for the MA-Stb-BMA system the dependence of R_p on the concentration of individual comonomers has extreme character, while for BMA-Stb-AN this dependence does not have similar character. This fact indicated that terpolymerization in the BMA-Stb-AN system proceeds according to a classical statistical copolymerization mechanism. The terpolymer composition-thermal behaviour relationships are also studied by differential scanning calorimetry and thermogravimetric analysis methods.     

Copolymerisation of maleic anhydride with electron-acceptor monomers

Copolymerisation of maleic anhydride with tert.-butyl methacrylate and trimethylsilyl methacrylate was studied. Both monomers form random copolymers with maleic anhydride and in both cases the acceptor monomer is incorporated preferentially into the copolymer. Maleic anhydride which does not homopolymerise has reactivity ratios of approximately zero. The esters have reactivity ratios of 12.8 for trimethylsilyl methacrylate and 2.95 for tert.-butyl methacrylate. Thermal behavior and molar masses were investigated as a function of composition. Conditions for hydrolysis of the trimethylsilyl ester groups to give free acid groups have been established.     

Terpolymerization of sulfur dioxide or maleic anhydride with unsaturated compounds under ultraviolet irradiation

The effect of ultraviolet irradiation on the terpolymerization was investigated. In the terpolymerizations of sulfur dioxide–butene-1–acrylonitrile, sulfur dioxide–butene-1–n-butyl acrylate, and maleic anhydride–allyl chloride–acrylonitrile systems, the composition of the terpolymers prepared under ultraviolet irradiation was different from those prepared in the dark. The unit content of sulfur dioxide and butene-1 or of maleic anhydride and allyl chloride in the terpolymer increased under ultraviolet irradiation. The nature of the growing end under ultraviolet irradiation is supposed to be the same as that of the dark polymerization on the basis of the same solvent effect on the terpolymer composition, the rate of polymerization and the molecular weight of polymer. The experimental results suggest that the complex between sulfur dioxide and butene-1 or maleic anhydride and allyl chloride might be excited by ultraviolet light and the excited complex may participate in the terpolymerization.     

Copolymerization of maleic anhydride with certain compounds of the vinyl series

Russian Chemical Bulletin -     

The mechanism of copolymerization of maleic anhydride with styrene and with vinyl acetate

A nonaqueous potentiometric direct titration method was used to determine the composition diagrams for the copolymerization of maleic anhydride with styrene and with vinyl acetate in methyl ethyl ketone at 50°C. The data were analyzed using nonlinear least-squares minimization routines to fit composition equations for the terminal, penultimate, and complex models directly. The applicability of each model to both systems were evaluated statistically. The penultimate model was found to best describe both systems, although in the case of the maleic anhydride/vinyl acetate system this was only a small improvement over the terminal model. Although significant comonomer complexation occurs in both systems, the complex model did not provide statistically significant improvement in fit to the data compared with the terminal model.     

Photosensitive materials based on copolymers of vinyl cyclopropyl ether with maleic anhydride

Copolymers prepared from vinyl cyclopropyl ether and maleic anhydride were modified with allyl alcohol, and the products obtained were thermally cross-linked with styrene. Photoresists were prepared from these copolymers, and their photolithographic parameters were determined.     

Esters of alternating copolymers of maleic or 2,3-dimethylmaleic anhydride with alkyl vinyl ethers

Maleic anhydride or 2,3-dimethylmaleic anhydride was copolymerized with a number of alkyl vinyl ethers, with AIBN as the initiator. The comonomers were always alternating and were obtained in yields ranging from 15 to 99%. The acid anhydride group in both series of copolymers was converted to the corresponding methyl esters in a two-step reaction. The structure of these polymers was established by elemental analysis and by infrared, ¹H-and ¹³C-NMR spectroscopy. Addtional characterization of these copolymers were carried out by viscosity measurements, differential scanning calorimetry for the determination of glass transition temperatures, and thermal degradation for the determination of the thermal stability of the copolymers.     

Syntheses of monomethoxy polyethyleneglycol vinyl ether macromonomers and their radical copolymerization with maleic anhydride

In order to develop new biocompatible materials, monomethoxy polyethyleneglycol vinyl ethers (Me(EG)_n VE, n = 1–39) were synthesized from the corresponding monomethoxy polyethyleneglycol with acetylene. Successful purification of the macromonomers was performed by some adsorption procedures such as charcoal and ion-exchange resin treatments. The Me(EG)_n VE macromonomers were easily copolymerized with maleic anhydride (MAn) to give alternating copolymers. The copolymerization rates significantly depended on the ethyleneglycol chain length of the Me(EG)_n VE, resulting in relatively lower polymerization rate of higher MW macromonomer. The use of nonelectron donor solvent such as carbon tetrachloride led to higher yields and higher MW of copolymers.     

Alternating copolymerization of ethylene with maleic anhydride

The copolymerization of ethylene with maleic anhydride was carried out with γ-radiation and a radical initiator, i.e., 2,2′-azobisisobutyronitrile and diisopropyl peroxydicarbonate under pressure at various reaction conditions. The homopolymerization of neither monomer was observed in this system. In the γ-ray-initiated copolymerization the G value (polymerized monomer molecules per 100 e.v.) was shown to be between 10³ and 10⁴. It was found that the dose rate exponent of the rate is approximately unity, and the rate is proportional to the amount of ethylene monomer. Apparent activation energies of 1.8 and 27.5 kcal./mole were obtained for γ-ray-initiated and AIBN-initiated copolymerization, respectively. Since the composition of copolymer is independent of monomer molar ratio and the molar ratio of ethylene to maleic anhydride in the polymer is approximately unity, the monomer reactivity ratios were obtained as r_E ? 0 and r_M ? 0 for γ-ray-initiated polymerization at 40°C. Alternating copolymerization was, therefore, concluded to occur. Infrared analysis of the copolymer is almost consistent with this. The copolymer in the solid state is amorphous. It is soluble in water, cyclohexane, and dimethylformamide and insoluble in lower alcohols, ether, and aromatic hydrocarbons. The aqueous solution of polymer gave a strong acid.     

Reactions of furfuryl alcohols with maleic anhydride

The reactions of some furfuryl alcohols with maleic anhydride have been reinvestigated and, for the first time, conditions defined for the production of intramolecular Diels-Alder adducts. In basic conditions these adducts yield phthalides in high yields.     

Sulfur-containing vinyl monomers. XIII. Cationic copolymerizations of vinyl sulfides with some vinyl monomers

Cationic copolymerizations of vinyl sulfides (VS) with some vinyl monomers with boron tri-fluoride-diethyl etherate catalyst were investigated to evaluate their monomer reactivities. The effects of VS on the copolymer yield and viscosity of the resulting copolymers revealed the inhibition or retardation mechanism which was explained in terms of the formation of a stable vinylsulfonium salt by the reaction between a propagating carbonium ion and VS monomer. From the results of copolymerizations of phenyl vinyl sulfide (PVS) with isobutyl vinyl ether (IBVE), β-chloroethyl vinyl ether (CEVE), α-methylstyrene (α-MeSt), and styrene (St), the relative reactivities of these monomers were found to be in the following order: IBVE > CEVE > PVS > α-MeSt > St. The relatively higher reactivity of PVS than St derivatives was explained on the basis of the conjugative and electron-donating nature of the VS monomer. The effects of alkyl and para-substituted phenyl groups in vinyl sulfides on their reactivities toward the propagating carbonium ion were correlated with polar factors and compared with those of the hydrolysis of α-mercaptomethyl chlorides. The transition state for the propagation reaction in cationic polymerization of VS was proposed to be a π-complex type structure.