复合兰姆波声子晶体中超宽部分禁带

兰姆波在声子晶体薄板中的传播特性因其在无损检测、 减振技术和传感器件等领域的潜在应用价值而受到越来越多的关注. 本文采用超原胞平面波展开法和有限元法系统地研究了复合对称结构声子晶体薄板中的兰姆波超宽部分禁带. 结果表明: 对于在薄板侧面对称地嵌入双层矩形空气柱构成的复杂系统, 低阶兰姆波部分带隙结构极为丰富. 将晶格常数(L)和板厚(H) 比值具有匹配关系的兰姆波声子晶体衔接构成复合结构, 低阶兰姆波部分禁带宽度因各组分结构的部分禁带交叠而得到显著拓宽, 可在低频超宽频带内实现对特定低阶兰姆波模式良好的模式选择功能. 该研究结果对兰姆波缺陷无损检测中模式优化选择及兰姆波单向导通器件设计等方面具有重要意义.     

弯曲型Lamb波传播特性与固井质量相关性研究

轻质水泥在油田固井中的广泛应用使得传统测井方式无法有效的对固井水泥胶结质量做出评价。为了研究新的可行的评价方法,本文采用传递矩阵方法对套管中传播的弯曲型Lamb波进行建模,并通过对所建模型进行数值计算研究了套管外水泥等介质的声学参数变化对弯曲型Lamb波衰减率的影响。数值计算的结果表明,弯曲型Lamb波的衰减率与水泥的声学参数以及水泥与套管的胶结状况有较强相关性,据此可对水泥与套管胶结状况进行评价。本文的计算结果与分析对弯曲型Lamb波在水泥胶结评价中的应用具有一定的参考意义。     

The effect of initial stress on the propagation behavior of SH waves in piezoelectric coupled plates

This study analytically investigates the propagation of shear waves (SH waves) in a coupled plate consisting of a piezoelectric layer and an elastic layer with initial stress. The piezoelectric material is polarized in z-axis direction and perfectly bonded to an elastic layer. The mechanical displacement and electrical potential function are derived for the piezoelectric coupled plates by solving the electromechanical field equations. The effects of the thickness ratio and the initial stress on the dispersion relations and the phase and group velocities are obtained for electrically open and mechanically free situations. The numerical examples are provided to illustrate graphically the variations of the phase and group velocities versus the wave number for the different layers comparatively. It is seen that the phase velocity of SH waves decreases with the increase of the magnitude of the initial compression stress, while it increases with the increase of the magnitude of the initial tensile stress. The initial stress has a great effect on the propagation of SH waves with the decrease of the thickness ratio. This research is theoretically useful for the design of surface acoustic wave (SAW) devices with high performance.     

Mode selection of Lamb waves for the evaluation of solid plates with liquid loading

This paper studies the mode selection of Lamb waves for evaluating solid plates with liquid loading. For this purpose, the Lamb wave selected should have the features such as zero normal displacement components at the plate surface in contact with liquid, small dispersion, and maximum group velocity. It is found that when the phase velocity of Lamb wave is equal to the longitudinal wave velocity of the plate material, its normal displacement at the plate surface is always zero. Through the numerical analyses, the specific S₂ Lamb wave that has zero normal displacement component at the plate surface, small dispersion and maximum group velocity compared with the other Lamb waves has been found. With respect to the specific S₂ Lamb wave, some experimental examinations have been carried out. It is found that the liquid loading on the plate surface has less influence on the specific S₂ Lamb wave signal but it can effectively eliminate the other signals. Moreover, the specific S₂ Lamb wave selected exhibits the capability of detecting multiple defects in the solid plate with the liquid loading. It can be concluded that the specific S₂ Lamb wave selected is suitable for the evaluation of solid plates with liquid loading.     

一种定征固体板表面性质的兰姆波方法

基于Ritec-SNAP系统建立了兰姆波实验系统，分析了用兰姆波幅频特性定征固体板表面性质的可行性。实验结果表明，用高阶、多模兰姆波的幅频特性可准确定征固体板表面性质的变化。     

各向同性板中盲孔缺陷的兰姆波拓扑成像

将拓扑成像用于各向同性板中盲孔缺陷的兰姆波检测。由于缺陷关于板中面是非对称的,兰姆波模式转换的影响不能忽略。成像方法是基于无缺陷参考媒质中两个超声场(直接声场和伴随声场)的计算。以传感器激励信号为声源,计算直接声场;以盲孔引起的兰姆波散射信号为声源,计算伴随声场。拓扑成像通过直接声场与伴随声场的相乘,可消除无缺陷处多模式混叠的干扰,提高成像分辨率。建立有限元模型,通过不同时刻的瞬态声场图可视化地显示多模式兰姆波在缺陷处的聚焦过程,揭示拓扑成像方法的物理机理。数值结果表明,相对于经典的延迟求和以及时间反转方法,拓扑成像对盲孔缺陷有更强的适应能力。即使对于复杂的包含模式转换的兰姆波信号,拓扑图像的质量依然没有受到影响。文中提出的成像方法对板类结构中非对称缺陷的兰姆波检测具有一定的应用潜力。     

Elastic guided wave propagation in a periodic array of multi-layered piezoelectric plates with finite cross-sections

In this study, we present a model study of guided wave dispersion and resonance behavior of an array of piezoelectric plates with arbitrary cross-sections. The objective of this work is to analyze the influence of the geometry of an element of a 1D-array ultrasound transducer on generating multi-resonance frequency so as to increase the frequency bandwidth of the transducers. A semi-analytical finite-element (SAFE) method is used to model guided wave propagation in multi-layered 1D-array ultrasound transducers. Each element of the array is composed of LiNbO₃ piezoelectric material with rectangular or subdiced cross-section. Four-node bilinear finite-elements have been used to discretize the cross-section of the transducer. Dispersion curves showing the dependence of phase and group velocities on the frequency, and mode shapes of propagating modes were obtained for different geometry consurations. A parametric analysis was carried out to determine the effect of the aspect ratio, subdicing, inversion layer and matching layers on the vibrational behavior of 1D-array ultrasound transducers. It was found that the geometry with subdiced cross-section causes more vibration modes compared with the rectangular section. Modal analysis showed that the additional modes correspond to lateral modes of the piezoelectric subdiced section. In addition, some modes have strong normal displacements, which may influence the bandwidth and the pressure field in front of the transducer. In addition, the dispersion curves reveal strong coupling between waveguide modes due to the anisotropy of the piezoelectric crystal. The effect of the matching layers was to cluster extensional and flexural modes within a certain frequency range. Finally, inversion layer is found to have a minor effect on the dispersion curves. This analysis may provide a means to analyze and understand the dynamic response of 1D-array ultrasound transducers.     

Corrosion and erosion monitoring in plates and pipes using constant group velocity Lamb wave inspection

Recent improvements in tomographic reconstruction techniques generated a renewed interest in short-range ultrasonic guided wave inspection for real-time monitoring of internal corrosion and erosion in pipes and other plate-like structures. Emerging evidence suggests that in most cases the fundamental asymmetric A₀ mode holds a distinct advantage over the earlier market leader fundamental symmetric S₀ mode. Most existing A₀ mode inspections operate at relatively low inspection frequencies where the mode is highly dispersive therefore very sensitive to variations in wall thickness. This paper examines the potential advantages of increasing the inspection frequency to the so-called constant group velocity (CGV) point where the group velocity remains essentially constant over a wide range of wall thickness variation, but the phase velocity is still dispersive enough to allow accurate wall thickness assessment from phase angle measurements. This paper shows that in the CGV region the crucial issue of temperature correction becomes especially simple, which is particularly beneficial when higher-order helical modes are also exploited for tomography. One disadvantage of working at such relatively high inspection frequency is that, as the slower A₀ mode becomes faster and less dispersive, the competing faster S₀ mode becomes slower and more dispersive. At higher inspection frequencies these modes cannot be separated any longer based on their vibration polarization only, which is mostly tangential for the S₀ mode while mostly normal for the A₀ at low frequencies, as the two modes become more similar as the frequency increases. Therefore, we propose a novel method for suppressing the unwanted S₀ mode based on the Poisson effect of the material by optimizing the angle of inclination of the equivalent transduction force of the Electromagnetic Acoustic Transducers (EMATs) used for generation and detection purposes.     

Micro-crack detection of nonlinear Lamb wave propagation in three-dimensional plates with mixed-frequency excitation

We propose a nonlinear ultrasonic technique by using the mixed-frequency signals excited Lamb waves to conduct micro-crack detection in thin plate structures. Simulation models of three-dimensional(3D) aluminum plates and composite laminates are established by ABAQUS software, where the aluminum plate contains buried crack and composite laminates comprises cohesive element whose thickness is zero to simulate delamination damage. The interactions between the S_0 mode Lamb wave and the buried micro-cracks of various dimensions are simulated by using the finite element method.Fourier frequency spectrum analysis is applied to the received time domain signal and fundamental frequency amplitudes,and sum and difference frequencies are extracted and simulated. Simulation results indicate that nonlinear Lamb waves have different sensitivities to various crack sizes. There is a positive correlation among crack length, height, and sum and difference frequency amplitudes for an aluminum plate, with both amplitudes decreasing as crack thickness increased, i.e.,nonlinear effect weakens as the micro-crack becomes thicker. The amplitudes of sum and difference frequency are positively correlated with the length and width of the zero-thickness cohesive element in the composite laminates. Furthermore,amplitude ratio change is investigated and it can be used as an effective tool to detect inner defects in thin 3D plates.     

SH wave propagation in a piezoelectric/piezomagnetic plate with an imperfect magnetoelectroelastic interface

In this paper, we investigate the SH wave propagation in a layered piezoelectric (PE) and piezomagnetic (PM) plate with an imperfect magnetoelectroelastic interface. A linear magnetoelectroelastic spring model is used to describe the weakness of the imperfect interface. On the basis of this model, dispersion curves and mode shapes of the SH waves are computed. In particular, a PZT-5A/CoFe₂O₄ composite plate is considered in the numerical examples to calculate the dispersion curves and the mode shapes for different combinations of the magnetic, electrical and elastic spring constants. The effects of the layer thickness ratio and the electric-magnetic boundary conditions on the dispersion curves are discussed in details. Our results show that for a general weak bonding case, the high modes of the dispersion curves are not monotonous in the range of small wave numbers. With the layer thickness ratio increasing, the wave velocities of the SH waves increase. The electric boundary conditions mainly determine the dispersion curves of the SH waves in the case of a small layer thickness ratio, i.e. a large thickness of the PE layer. The present results have relevant applications in the nondestructive testing and evaluation of the layered PE/PM plate-like wave devices.     

Time-domain analysis of second-harmonic generation of primary Lamb wave propagation in an elastic plate

Within the second-order perturbation approximation,this paper investigates the physical process of generation of the time-domain second harmonic by a primary Lamb wave waveform in an elastic plate.The present work is performed based on the preconditions that the phase velocity matching is satisfied and that the transfer of energy from the primary Lamb wave to the double frequency Lamb wave is not zero.It investigates the influences of the difference between the group velocities of the primary Lamb wave and the double frequency Lamb wave,the propagation distance and the duration of the primary Lamb wave waveform on the envelope shape of the time-domain second harmonic.It finds that the maximum magnitude of the envelope of the second-harmonic waveform can grow within some propagation distance even if the condition of group velocity matching is not satisfied.Our analyses also indicate that the maximum magnitude of the envelope of the second-harmonic waveform is kept constant beyond a specific propagation distance.Furthermore,it concludes that the integration amplitude of the time-domain second-harmonic waveform always grows with propagation distance within the second-order perturbation.The present research yields new physical insight not previously available into the effect of generation of the time-domain second harmonic by propagation of a primary Lamb wave waveform.     

Lamb wave propagation in three-layered composites

I.IntroductionThepropagationpropcrticsofLambwavesinasinglep1atchavebceninvestigatedwide1ysincel93o's,butthestudyofLambwavcsin1aycredsolidcompositesisre1ative1ynew.WuandZhuana1yzedthepropagationofLambwavcsinaso1idp1ateboundedbytwo1iquid1ayerswithidentica1thickncss.['lOntheothcrhand,L1oydandRedwoodstudiednumerica11yLambwavesinacompositeconsistingofa1iquidintcrmediate1ayerandtwosolidplates.['lInour'l,lwederivedthecharacteristicequationforLambwavesintwo-layeredsolidpreviouspaper,compositeswit…     

Simultaneous measurement of the phase and group velocities of Lamb waves in a laser-generation based imaging method

This paper describes a novel approach to the simultaneous measurement of the phase and group velocities of Lamb waves based on images of their propagation. The laser-generation based imaging method was first introduced to obtain images of Lamb wave propagation. The time series of snapshot images is used to make a position-time diagram, and the velocities can be estimated based on the slopes of the position curves. Thus, the phase and group velocities can be obtained by measuring the phase advance and energy flow of the Lamb wave, respectively. Details of the principle of simultaneous measurement are presented herein. Experimental verification was also performed in the range of 0.2-3.0 MHz-mm using aluminum plates. The average errors between experiment and theory in the phase and group velocities were 3.31% and 5.68%, respectively.     

三层固体复合媒质中Lamb波的传播

本文导出了任意厚度的三层固体复合媒质中Lamb波特征方程式,给出了相邻固体层之间重要的两种界面条件(刚性联接和滑移联接)时Lamb波色散曲线。我们也计算了不同界面状况时Lamb波两个最低阶模式(对称模式s₀和反对称模式a₀)所产生的质点位移沿厚度方向的分布。     

利用Taylor展开法研究Lamb波在功能梯度材料中的传播特性

超声技术可用于对功能梯度材料(FGMs)的性质进行评估. 由于FGMs性质的非均匀性,采用分布函数来描述FGMs弹性常数和密度沿厚度方向的变化趋势,并提出利用Taylor展开的方法来解决分布函数为任意函数时的FGMs中Lamb波的传播问题. 利用本征函数展开法得到了铁基氧化铝FGMs中Lamb波的相速度色散曲线,讨论了材料性质分布对铁基氧化铝FGMs中Lamb波传播特性的影响. 为FGMs性质(沿板厚方向变化)的反演提供了理论依据. 关键词： 功能梯度材料 Lamb波 Legendre多项式 分布函数     

非线性兰姆波在阶梯板中传播的有限元仿真

在非线性兰姆波检测中,累积二次谐波是重要的检测信号.该文利用有限元法仿真了非线性兰姆波在阶梯板中的产生和传播过程,通过二维离散傅里叶变换分析了兰姆波的传播模态和各个模态通过波导横截面的能流大小,给出了各个模态在阶梯板中的反射、透射系数,总结了其随阶梯板厚度的变化规律.研究发现,随着台阶增高,散射效应使得兰姆波更难入射波...     

一种评价固体板材表面性质的非线性超声兰姆波方法

在基频与二倍频兰姆波相速度匹配但群速度失配的条件下, 通过选择适当的兰姆波二次谐波时域信号的测量起止时间, 可完全扣除换能器对二次谐波积分振幅测量所带来的影响。本文提出采用兰姆波二次谐波的积分振幅作为评价参量, 以实现对板材表面性质的准确评价。当板材表面性质发生改变时, 原本在理想表面条件下成立的基频与二倍频兰姆波相速度匹配的条件不再严格满足, 这将显著地影响到兰姆波的二次谐波发生效率, 相应的二次谐波积分振幅随表面性质的改变也将发生非常敏感的单调变化。实验结果表明,利用扣除换能器影响之后所测得的兰姆波二次谐波的积分振幅,可对板材表面性质的变化情况进行准确评价。     

有效测量套管井泄漏Lamb波衰减的实验研究

低密度水泥在油气井中的广泛应用使得常规的声阻抗类测井方法难以准确、有效地评价固井质量,而声波倾斜入射在套管中激发的弯曲型Lamb波对水泥的性质及胶结情况具有很高的分辨能力,能够很好地解决低密度水泥的固井质量评价问题。弯曲型Lamb波对套管后介质声学信息的响应反映在声波衰减中,因此该文通过实验研究了激发弯曲型Lamb波的有效方式,分析了声波入射和接收角度对Lamb波衰减的影响。实验结果表明,入射和接收角度在一定范围内变化时,虽然激发出的Lamb波模式均为弯曲型Lamb波,但在同一套管模型下测量的声波衰减值会有差异,选择激发弯曲型Lamb波的最有效方式,计算得到的Lamb波衰减对套管后介质的灵敏度才会最高。     

Liquid level sensor using ultrasonic Lamb waves

This paper describes a novel, noninvasive method for measurement of liquid level in closed metal tanks that are under high pressure. It is based on the use of ultrasonic Lamb waves propagating along the tank wall. Contact with liquid substantially changes the characteristics of these waves and this can be used as an indicator of liquid presence. Theoretical analysis shows that the symmetric and antisymmetric Lamb wave modes, both fundamental and higher order, are sensitive to presence of the liquid. The optimal wave frequency depends on the thickness of the tank wall and wall material. A prototype level sensor based on this principle has been developed. It uses two pairs of wedge transducers to generate and detect Lamb waves propagating along the circumference of the gas tank. An operating frequency of 100 kHz is found to be optimal for use with tanks having a wall thickness of 30-50 mm. Prototype sensors developed under this program have been used successfully in oil fields in the far northern region of Russia.