Low-valent chemistry of cobalt amide. Synthesis and structural characterization of cobalt(II) amido, aryloxide, and thiolate compounds

The binuclear cobalt(II) amide complex [(CoL2)2-(TMEDA)] (1) [L = N(Si(t)BuMe2)(2-C5H3N-6-Me); TMEDA = Me2NCH2CH2NMe2] has been synthesized by the reaction of anhydrous CoCl2 with 2 equiv of [Li(L)(TMEDA)]. X-ray crystallography revealed that complex 1 consists of two [CoL2] units linked by one TMEDA ligand molecule, which binds in an unusual N,N'-bridging mode. Protolysis of 1 with the bulky phenol Ar(Me)OH (Ar(Me) = 2,6-(t)Bu2-4-MeC6H2) and thiophenol ArSH (Ar = 2,4,6-(t)Bu3C6H2) gives the neutral monomeric cobalt(II) bis(aryloxide) [Co(OAr(Me))2(TMEDA)] (2) and dithiolate [Co(SAr)2(TMEDA)] (3), respectively. Complexes 1-3 have been characterized by mass spectrometry, microanalysis, magnetic moment, and melting-point measurements, in addition to X-ray crystallography.     

A germanium isocyanide complex featuring (n → π*) back-bonding and its conversion to a hydride/cyanide product via C-H bond activation under mild conditions

Reaction of the diarylgermylene Ge(Ar(Me(6)))(2) [Ar(Me(6)) = C(6)H(3)-2,6-(C(6)H(2)-2,4,6-(CH(3))(3))(2)] with tert-butyl isocyanide gave the Lewis adduct species (Ar(Me(6)))(2)GeCNBu(t), in which the isocyanide ligand displays a decreased C-N stretching frequency consistent with an n → π* back-bonding interaction. Density functional theory confirmed that the HOMO is a Ge-C bonding combination between the lone pair of electrons on the germanium atom and the C-N π* orbital of the isocyanide ligand. The complex undergoes facile C-H bond activation to produce a new diarylgermanium hydride/cyanide species and isobutene via heterolytic cleavage of the N-Bu(t) bond.     

Half-sandwich o-N,N-dimethylaminobenzyl complexes over the full size range of group 3 and lanthanide metals. synthesis, structural characterization, and catalysis of phosphine P--H bond addition to carbodiimides

The acid-base reactions between the rare-earth metal (Ln) tris(ortho-N,N-dimethylaminobenzyl) complexes [Ln(CH2C(H4NMe2-o)3] with one equivalent of the silylene-linked cyclopentadiene-amine ligand (C5Me4H)SiMe2NH(C6H2Me3-2,4,6) afforded the corresponding half-sandwich aminobenzyl complexes [{Me2Si(C5Me4)(NC6H2Me3-2,4,6)}Ln(CH2C6H4NMe2-o)(thf)] (2-Ln) (Ln=Y, La, Pr, Nd, Sm, Gd, Lu) in 60-87 % isolated yields. The one-pot reaction between ScCl(3) and [Me2Si(C5Me4)(NC6H2Me3-2,4,6)]Li2 followed by reaction with LiCH2C6H4NMe2-o in THF gave the scandium analogue [{Me2Si(C5Me4)(NC6H2Me3-2,4,6)}Sc(CH2C6H4NMe2-o)] (2-Sc) in 67 % isolated yield. 2-Sc could not be prepared by the acid-base reaction between [Sc(CH2C6H4NMe2-o)3] and (C5Me4H)SiMe2NH(C6H2Me3-2,4,6). These half-sandwich rare-earth metal aminobenzyl complexes can serve as efficient catalyst precursors for the catalytic addition of various phosphine P--H bonds to carbodiimides to form a series of phosphaguanidine derivatives with excellent tolerability to aromatic carbon-halogen bonds. A significant increase in the catalytic activity was observed, as a result of an increase in the metal size with a general trend of La>Pr, Nd>Sm>Gd>Lu>Sc. The reaction of 2-La with 1 equiv of Ph2PH yielded the corresponding phosphide complex [{Me2Si(C5Me4)(NC6H2Me3-2,4,6)}La(PPh2)(thf)2] (4), which, on recrystallization from benzene, gave the dimeric analogue [{Me2Si(C5Me4)(NC6H2Me3-2,4,6)}La(PPh2)]2 (5). Addition of 4 or 5 to iPrN=C=NiPr in THF yielded the phosphaguanidinate complex [{Me2Si(C5Me4)(NC6H2Me3-2,4,6)}La{iPrNC(PPh2)NiPr}(thf)] (6), which, on recrystallization from ether, afforded the ether-coordinated structurally characterizable analogue [{Me2Si(C5Me4)(NC6H2Me3-2,4,6)}La{iPrNC(PPh2)NiPr}(OEt2)] (7). The reaction of 6 or 7 with Ph2PH in THF yielded 4 and the phosphaguanidine iPrN=C(PPh2)NHiPr (3a). These results suggest that the catalytic formation of a phosphaguanidine compound proceeds through the nucleophilic addition of a phosphide species, which is formed by the acid-base reaction between a rare-earth metal o-dimethylaminobenzyl bond and a phosphine P--H bond, to a carbodiimide, followed by the protonolysis of the resultant phosphaguanidinate species by a phosphine P--H bond. Almost all of the rare earth complexes reported this paper were structurally characterized by X-ray diffraction studies.     

Complexes of the heavier alkaline Earth metals Ca, Sr, and Ba with O-functionalized phosphanide ligands

Metathesis reactions between either SrI(2) or BaI(2) and 2 equiv of the potassium phosphanide [[(Me(3)Si)(2)CH]-(C(6)H(4)-2-OMe)P]K yield, after recrystallization, the complexes [[([Me(3)Si](2)CH)(C(6)H(4)-2-OMe)P](2)M(THF)(n)] [M = Sr, n = 2 (5); Ba, n = 3 (6)]. Similar metathesis reactions between MI(2) and 2 equiv of the more sterically demanding potassium phosphanide [[(Me(3)Si)(2)CH](C(6)H(3)-2-OMe-3-Me)P]K yield the chemically isostructural complexes [[([Me(3)Si](2)CH)(C(6)H(3)-2-OMe-3-Me)P](2)M(THF)(2)] [M = Ca (9), Sr (7), Ba (8)]. Compounds 5-9 have been characterized by multi-element NMR spectroscopy and X-ray crystallography. Complex 9 is thermally unstable and decomposes at room temperature to give the tertiary phosphane [(Me(3)Si)(2)CH](C(6)H(3)-2-OMe-3-Me)P(Me) and an unidentified Ca-containing product. Compounds 5 and 6 also decompose at elevated temperatures to give the corresponding tertiary phosphane [(Me(3)Si)(2)CH](C(6)H(4)-2-OMe)P(Me) and intractable metal-containing products. The decomposition of 5, 6, and 9 suggests that these compounds undergo an intramolecular methyl migration from the O atom in one phosphanide ligand to the P atom of an adjacent phosphanide ligand to give species containing dianionic alkoxo-phosphanide ligands.     

1,3-Migration of Trimethylsilyl Group from Carbon to Oxygen in Highly Sterically Hindered Silanol of the Type (Me 3 Si) 3 CSi(C 6 H 4 Me- p )MeOH and Reaction of the Related Iodide with Iodine Monochloride and Iodine Monobromide

The silanol (Me 3 Si) 3 CSi(C 6 H 4 Me- p )MeOH has been shown to isomerize to (Me 3 Si) 2 CHSi(C 6 H 4 Me- p )(Me)(OSiMe 3 ) when it was kept at room temperature for 10 h in 0.2 M NaOMe/MeOH. Corresponding isomerizations of the above silanol (to give (Me 3 Si) 2 CHSi(C 6 H 4 Me- p ) (Me)(OSiMe 3 )) are complete after 26 h under reflux in pyridine. The reaction involve 1,3-migration from carbon to oxygen within a silanolate ion to give a carbanion, which rapidly acquires a proton from the solvent. Treatment of (Me 3 Si) 3 CSi(C 6 H 4 Me- p )MeOH with MeLi in Et 2 O/THF give, by the same rearrangement, the organolithium reagent (Me 3 Si) 2 CLiSi(C 6 H 4 Me- p )(Me)(OSiMe 3 ) which on treatment with Me 2 SiHCl gives (Me 3 Si) 2 C(SiMe 2 H)Si(C 6 H 4 Me- p )(Me)(OSiMe 3 ) and (Me 3 Si) 2 CHSi(C 6 H 4 Me- p )(Me)(OSiMe 3 ). When the experiment was repeated, but with Me 3 SiCl in place of Me 2 SiHCl, it gives exclusively (Me 3 Si) 2 CHSi(C 6 H 4 Me- p )(Me)(OSiMe 3 ). Treatment of the organolithium reagent (Me 3 Si) 2 CLiSi(C 6 H 4 Me- p )(Me)(OSiMe 3 ) with Mel gives exclusively (Me 3 Si) 2 CMeSi(C 6 H 4 Me- p )(Me)(OSiMe 3 ). The related iodide (Me 3 Si) 3 CSi(C 6 H 4 Me- p )Mel reacts with ICI and IBr to give rearranged (Me 3 Si) 2 C(SiMe 2 X)Si(C 6 H 4 Me- p )Me 2 and unrearranged products (Me 3 Si) 3 CSi(C 6 H 4 Me- p )MeX, (X = Cl, Br) respectively. The rearranged bromide (Me 3 Si) 2 C(SiMe 2 Br)Si(C 6 H 4 Me- p )Me 2 reacts with a range of silver [I] salts AgY (Y = OOCCH 3 , SO 4 2 m ) and Mercury [II] salt HgY 2 (Y = OOCCH 3 , SO 4 2 m ) in glacial CH 3 COOH to give the corresponding species (Me 3 Si) 2 C(SiMe 2 OOCCH 3 )Si(C 6 H 4 Me- p )Me 2 . The reaction of the bromide with AgBF 4 in MeOH or i -PrOH give the corresponding rearranged products (Me 3 Si) 2 C(SiMe 2 Y)Si(C 6 H 4 Me- p )Me 2 (Y = --OMe, --OPr i ).     

Oxamato-bridged trinuclear NiIICuIINiII complexes: a new (NiIICuIINiII)2 hexanuclear complex and supramolecular structures. Characterization and magnetic properties

Eight oxamato-bridged heterotrinuclear Ni(II)Cu(II)Ni(II) complexes of formula ([Ni(H(2)O)(dpt)](2)(mu-Cu(H(2)O)(opba)))(ClO(4))2 (1), ([Ni(H(2)O)(dien)](2)(mu-Cu(pba)))(ClO(4))(2).6H(2)O (2), ([Ni(H(2)O)(Medpt)](2)(mu-Cu(OHpba)))(ClO(4))(2).4H(2)O (3), ([Ni(H(2)O)(dien)](2)(mu-Cu(Me(2)pba)))(ClO(4))(2).2.5H(2)O (4), ([Ni(H(2)O)(dpt)](2)(mu-Cu(Me(2)pba)))(ClO(4))(2).2H(2)O (5), ([Ni(H(2)O)(dien)](2)(mu-Cu(OHpba)))(ClO(4))(2).4H(2)O (6), ([Ni(2)(dpt)(2)(mu-Cu(H(2)O)(pba))](2)(mu-N(3))(2))Na(2)(ClO(4))(4).6H(2)O (7), and ([Cu(H(2)O)(2)(dpt)Ni(2)(H(2)O)(dpt)(2)](mu-H(2)Me(2)pba(2-)))(ClO(4))(4).3H(2)O (8) in which opba = o-phenylenbis(oxamato), pba = 1,3-propylenebis(oxamato), OHpba = 2-hydroxy-1,3-propylenebis(oxamato), Me(2)pba = 2,2-dimethyl-1,3-propylenbis(oxamato), dpt = 3,3'-diaminodipropylamine, dien = 2,2'-diaminodiethylamine, and Medpt = 3,3'-diamino-N-methyldipropylamine were synthesized and characterized. The crystal structures of 1, 7, and 8 were solved. For complex 1, the trinuclear entities are linked by hydrogen bonds forming a one-dimensional system, and for complex 8, the presence of van der Waals interactions gives a one-dimensional system, too. For complex 7, the trinuclear entities are self-assembled by azido ligands, given a hexanuclear system; each of these hexanuclear entities are self-assembled through two [Na(O)(3)(H(2)O)(3)] octahedral-sharing one-edge entities, given a one-dimensional system. The magnetic behavior of complexes 2-7 was investigated by variable-temperature magnetic susceptibility measurements. Complexes 2-6 exhibit the minimum characteristic of this kind of polymetallic species with an irregular spin state structure. The Jvalue through the oxamato bridge varied between -88 cm(-1) (for 6) and -111.2 cm(-1) (for 5). For complex 7, the values obtained were J(1) = -101.7 cm(-1) (through the oxamato ligand) and J(2) = -3.2 cm(-1) (through the azido ligand).     

Bis[bis(trimethylsilyl)amino]silylene,an unstable divalent silicon compound

The title compound, [(Me3Si)2N]2Si: (1), was prepared by the reduction of [(Me3Si)2N]2SiBr2 (2) with potassium graphite at -78 degrees C. Unlike the corresponding germanium and tin compounds, 1 is unstable, but it can be studied in solution at low temperatures. The 29Si NMR chemical shift of 1 measured at -20 degrees C was 223.9 ppm, in good agreement with a value obtained from model calculations of 233 ppm. Reaction of solutions of 1 with methanol or phenol gave the trapping products expected for the silylene, [(Me3Si)2N]2Si(H)OR (R = CH3, C6H5).     

Synthesis and structural characterization of Sm(II) and Yb(II) complexes containing sterically demanding, chelating secondary phosphide ligands

Metathesis between [(Me3Si)2CH)(C6H4-2-OMe)P]K and SmI2(THF)2 in THF yields [([Me3Si]2CH)(C6H4-2-OMe)P)2Sm(DME)(THF)] (1), after recrystallization. A similar reaction between [(Me3Si)2CH)(C6H3-2-OMe-3-Me)P]K and SmI2(THF)2 yields [([Me3Si]2CH)(C6H3-2-OMe-3-Me)P)2Sm(DME)].Et2O (2), while reaction between [(Me3Si)2CH)(C6H4-2-CH2NMe2)P]K and either SmI2(THF)2 or YbI2 yields the five-coordinate complex [([Me3Si]2CH)(C6H4-2-CH2NMe2)P)2Sm(THF)] (3) or the solvent-free complex [([Me3Si]2CH)(C6H4-2-CH2NMe2)P)2Yb] (4), respectively. X-ray crystallography shows that complex 2 adopts a distorted cis octahedral geometry, while complex 1 adopts a distorted pentagonal bipyramidal geometry (1, triclinic, P1, a = 11.0625(9) A, b = 15.924(6) A, c = 17.2104(14) A, alpha = 72.327(2) degrees, beta = 83.934(2) degrees, gamma = 79.556(2) degrees, Z = 2; 2, monoclinic, P2(1), a = 13.176(4) A, b = 13.080(4) A, c = 14.546(4) A, beta = 95.363(6) degrees, Z = 2). Complex 3 crystallizes as monomers with a square pyramidal geometry at Sm and exhibits short contacts between Sm and the ipso-carbon atoms of the ligands (3, monoclinic, C2/c, a = 14.9880(17) A, b = 13.0528(15) A, c = 24.330(3) A, beta = 104.507(2) degrees, Z = 4). Whereas preliminary X-ray crystallographic data for 4 indicate a monomeric structure in the solid state, variable-temperature 1H, 13C(1H), 31P(1H), and 171Yb NMR spectroscopies suggest that 4 undergoes an unusual dynamic process in solution, which is ascribed to a monomer-dimer equilibrium in which exchange of the bridging and terminal phosphide groups may be frozen out at low temperature.     

Synthesis, structures and stabilities of thioanisole-functionalised phosphido-borane complexes of the alkali metals

Treatment of the secondary phosphine {(Me(3)Si)(2)CH}PH(C(6)H(4)-2-SMe) with BH(3)·SMe(2) gives the corresponding phosphine-borane {(Me(3)Si)(2)CH}PH(BH(3))(C(6)H(4)-2-SMe) (9) as a colourless solid. Deprotonation of 9 with n-BuLi, PhCH(2)Na or PhCH(2)K proceeds cleanly to give the corresponding alkali metal complexes [[{(Me(3)Si)(2)CH}P(BH(3))(C(6)H(4)-2-SMe)]ML](n) [ML = Li(THF), n = 2 (10); ML = Na(tmeda), n = ∞ (11); ML = K(pmdeta), n = 2 (12)] as yellow/orange crystalline solids. X-ray crystallography reveals that the phosphido-borane ligands bind the metal centres through their sulfur and phosphorus atoms and through the hydrogen atoms of the BH(3) group in each case, leading to dimeric or polymeric structures. Compounds 10-12 are stable towards both heat and ambient light; however, on heating in toluene solution in the presence of 10, traces of free phosphine-borane 9 are slowly converted to the free phosphine {(Me(3)Si)(2)CH}PH(C(6)H(4)-2-SMe) (5) with concomitant formation of the corresponding phosphido-bis(borane) complex [{(Me(3)Si)(2)CH}P(BH(3))(2)(C(6)H(4)-2-SMe)]Li (14).     

Preparation and stereochemistry of methyl 3-(and 4)-p-chlorothiophenoxy-1-methylpiperidine-4-(and 3)-carboxylates,and cyclization to benzothiopyranopyridinones

The title piperidines were prepared by (a) methanolysis of the corresponding nitriles and (b) addition of p-chlorothiophenol to the appropriate tetrahydropyridines. Three esters were obtained with stereochemistry assigned by nmr analysis: 2 [3(a) SAr, 4(e) CO₂Me], 5 [4(e) SAr, 3(e) CO₂Me], 6 [4(a) SAr, 3(e) CO₂Me]. Compounds 2 and 6 cyclized in 70% sulfuric acid. The product structures were established by X-ray crystallography and, surprisingly, both had trans-fused rings. Compound 5 , however, did not cyclize but gave 4-(methylthio)chlorobenzene as the sole isolated product.     

Reversal of polarization in amidophosphines: neutral- and anionic-kappaP coordination vs. anionic-kappaP,N coordination and the formation of nickelaazaphosphiranes

Nickel(ii) chloride reacts with the bis(tert-butylamino)diazadiphosphetidine {Bu(t)(H)NP(micro-NBu(t))(2)PN(H)Bu(t)} to form trans-[{Bu(t)(H)NP(micro-NBu(t))(2)PN(H)Bu(t)}(2)NiCl(2)]. In solution and the solid-state each heterocyclic ligand coordinates nickel through one phosphorus atom only. For comparison the solid-state structure of the known trans-[NiCl(2)(PEt(3))(2)] was also determined and it was found that the two complexes have almost identical bond parameters about nickel. The nickel-amidophosphine complexes [{Bu(t)OP(micro-NBu(t))(2)PNBu(t)}NiCl(PBu(n)(3))], [(PBu(n)(3))ClNi{Bu(t)NP(micro-NBu(t))(2)PNBu(t)}NiCl(PBu(n)(3))], and [{Me(2)Si(micro-NBu(t))(2)PNBu(t)}NiCl(PBu(n)(3))] were synthesized and X-ray structurally characterized. In these mono- and di-nuclear nickel complexes the nickel ions are coordinated in pseudo square-planar fashions, by one trialkylphosphine ligand, one chloride ligand and one kappaP,N-coordinated amidophosphine moiety from tert-butylamido-substituted heterocycles. Attempts to create nickel complexes chelated in a kappa(2)P fashion by the o-phenylenediamine-tethered mono- and di-anionic 1-{Me(2)Si(micro-NBu(t))(2)PN} 2-{Me(2)Si(micro-NBu(t))(2)PNH}C(6)H(4) and 1,2-{Me(2)Si(micro-NBu(t))(2)PN}C(6)H(4), respectively, afforded instead [1,2-{Me(2)Si(micro-NBu(t))(2)PN}{Me(2)Si(micro-NBu(t))(2)PN}C(6)H(4)NiCl] and [1,2-{Me(2)Si(micro-NBu(t))(2)PN}{Me(2)Si(micro-NBu(t))(2)PN}C(6)H(4)Ni{PEt(3)}], each complex having kappaP,N and kappaP coordinated amidophosphine ligands.     

Reaction of the stable silylene Si[(NCH2But)2C6H4-1,2] with lithium amides

The thermally stable silylene Si[(NCH2But)2C6H4-1,2] 1 undergoes oxidative addition reactions with the lithium amides LiNRR'(R = SiMe3, R' = But; R = SiMe3, R' = C6H3Me2-2,6; R = R' = Me or R = R' = Pri) to afford the new lithium amides Li(THF)2[N(R)Si(SiMe3){(NCH2But)2C6H4-1,2}][R = But2 or R = C6H3Me2-2,6 (3a)] or the new tris(amino)functionalised silyllithiums Li(THF)x[Si{(NCH2But)2C6H4-1,2}NRR'][R = SiMe3, R' = C6H3Me2-2,6, x = 2 (3); R = R'= Me, x = 3 (4) or R = R' = Pri, x = 3 (5)]. Compounds 4 and 5 are stable at ambient temperature but compound 3 is thermally labile and converts into 3a upon heating. The pathway for the formation of 2 and 3 is discussed and the X-ray structures of 2-5 are presented.     

Effect of peripheral donor substituents on the binding modes of phosphinomethanide ligands. Synthesis and crystal structures of alkali metal derivatives of an O-functionalised phosphinomethanide ligand

The O-functionalised tertiary phosphine {(Me3Si)2CH}P(C6H4-2-CH2OMe)2 (9) is accessible via the reaction of {(Me3Si)2CH}PCl2 with two equivalents of in situ generated 2-LiC6H4CH2OMe. Phosphine 9 is readily deprotonated by Bu(n)Li to give the lithium phosphinomethanide [[{(Me3Si)2C}P(C6H4-2-CH2OMe)2]Li] (13), which undergoes metathesis reactions with the alkoxides MOR [M = Na, K, R = Bu(t); M = Rb, R = 2-ethylhexyl] to give the heavier alkali metal phosphinomethanides [[{(Me3Si)2C}P(C6H4-2-CH2OMe)2]M]n in good yields [M = Na (14), n= 2; M = K (15), Rb (16), n=[infinity]]. Compounds 9, [{(Me3Si)2CH}P(C6H4-2-CH2OMe)2LiBr]2 (10), and 14-16 have been studied by X-ray crystallography; in the solid state 14 adopts a dimeric structure, whereas 15 and 16 crystallise as one-dimensional polymers.     

Alkali metal complexes of a naphthylamine-substituted phosphanide

The reaction between {(Me3Si)2CH}PCl2 and one equivalent of [C10H6-8-NMe2]Li, followed by in situ reduction with LiAlH4, gives the secondary phosphane {(Me3Si)2CH}(C10H6-8-NMe2)PH(1) in good yield as a colourless crystalline solid. Metalation of 1 with Bu(n)Li in diethyl ether gives the lithium phosphanide [{[{(Me3Si)2CH}(C10H6-8-NMe2)P]Li}2(OEt2)](2), which undergoes metathesis with either NaOBu(t) or KOBu(t) to give the heavier alkali metal derivatives [[{(Me3Si)2CH}(C10H6-8-NMe2)P]-Na(tmeda)](3) and [[{(Me3Si)2CH}(C10H6-8-NMe2)P]K(pmdeta)](4), after recrystallisation in the presence of the corresponding amine co-ligand [tmeda = N,N,N',N'-tetramethylethylenediamine, pmdeta = N,N,N',N",N"-pentamethyldiethylenetriamine]. Compounds 2-4 have been characterised by 1H, 13C{1H} and 31P{1H} NMR spectroscopy, elemental analyses and X-ray crystallography. Dinuclear 2 crystallises with the phosphanide ligands arranged in a head-to-head fashion and is subject to dynamic exchange in toluene solution; in contrast, compounds 3 and 4 crystallise as discrete monomers which exhibit no dynamic behaviour in solution. DFT calculations on the model compound [{[(Me)(C10H6-8-NMe2)P]Li},(OMe2)] (2a) indicate that the most stable head-to-head form is favoured by 15.0 kcal mol(-1) over the corresponding head-to-tail form.     

三(三甲硅基)环戊二烯基三羰基钼负离子的反应性

三(三甲硅基)环戊二烯基三羰基钼负离子锂盐[{η^5-(Me~3Si)~3C~5H~2}Mo(CO)~3]^-Li^+(1), 分别与MeI、phCH~2Cl及ClCH~2COOC~2H~5反应生成相应的烃基化钼衍生物[{η^5-(Me~3Si)~3C~5H~2}Mo(CO)~3R,] (R=-CH~3, 2; -CH~2ph, 3;-CH~2COOC~2H~5, 4)。1与PCl~3反应除得到预期的钼氯化物[{η^5-(Me~3Si)~3C~5H~2}Mo(CO)~3Cl](5)外, 主要得到钼磷氯化物[{η^5-(Me~3Si)~3C~5H~2}Mo(CO)~3PCl~2] 6; 1与碘反应得到钼碘化物[{η^5-(Me~3Si)~3C~5H~2}Mo(CO)~3I] 7; 1与HOAc作用后分别和CCl~4、NBS室温反应, 仅分离到脱去一个Me~3Si的钼卤化物[{η^5-(Me~3Si)~2C~5H~2}Mo(CO)~3X], (X:Cl, 8; Br, 9)。     

Alkali metal complexes of sterically demanding amino-functionalized secondary phosphanide ligands

The reaction between {(Me(3)Si)(2)CH}PCl(2) (4) and one equivalent of either [C(6)H(4)-2-NMe(2)]Li or [2-C(5)H(4)N]ZnCl, followed by in situ reduction with LiAlH(4) gives the secondary phosphanes {(Me(3)Si)(2)CH}(C(6)H(4)-2-NMe(2))PH (5) and {(Me(3)Si)(2)CH}(2-C(5)H(4)N)PH (6) in good yields as colourless oils. Metalation of 5 with Bu(n)Li in THF gives the lithium phosphanide [[{(Me(3)Si)(2)CH}(C(6)H(4)-2-NMe(2))P]Li(THF)(2)] (7), which undergoes metathesis with either NaOBu(t) or KOBu(t) to give the heavier alkali metal derivatives [[{(Me(3)Si)(2)CH}(C(6)H(4)-2-NMe(2))P]Na(tmeda)] (8) and [[{(Me(3)Si)(2)CH}(C(6)H(4)-2-NMe(2))P]K(pmdeta)] (9) after recrystallization in the presence of the corresponding amine co-ligand [tmeda = N,N,N',N'-tetramethylethylenediamine, pmdeta = N,N,N',N',N'-pentamethyldiethylenetriamine]. The pyridyl-functionalized phosphane 6 undergoes deprotonation on treatment with Bu(n)Li to give a red oil corresponding to the lithium compound [{(Me(3)Si)(2)CH}(2-C(5)H(4)N)P]Li (10) which could not be crystallized. Treatment of this oil with NaOBu(t) gives the sodium derivative [{[{(Me(3)Si)(2)CH}(2-C(5)H(4)N)P]Na}(2) x (Et(2)O)](2) (11), whilst treatment of with KOBu(t), followed by recrystallization in the presence of pmdeta gives the complex [[{(Me(3)Si)(2)CH}(2-C(5)H(4)N)P]K(pmdeta)](2) (12). Compounds 5-12 have been characterised by (1)H, (13)C{(1)H} and (31)P{(1)H} NMR spectroscopy and elemental analyses; compounds 7-9, and 12 have additionally been characterised by X-ray crystallography. Compounds 7-9 crystallize as discrete monomers, whereas 11 crystallizes as an unusual dimer of dimers and 12 crystallizes as a dimer with bridging pyridyl-phosphanide ligands.     

Lewis acid assisted methyl/chlorine exchange in silylated hydrazinochlorophosphanes

Differently substituted hydrazinophosphanes of the type (Me(3)Si)(2)N-N(SiMe(3))-PR(1)R(2) (R(1) = Cl with R(2) = Me, C(6)F(5) and R(1) = Me, R(2) = C(6)H(5)) have been studied in the reaction with Lewis acids such as ECl(3) (E = Al, Ga). For (Me(3)Si)(2)N-N(SiMe(3))-P(Cl)(Me) and (Me(3)Si)(2)N-N(SiMe(3))-P(Me)(C(6)H(5)), only adduct formation was found while a chlorine/methyl exchange reaction was observed for (Me(3)Si)(2)N-N(SiMe(3))-P(Cl)R (R = C(6)H(5) and C(6)F(5)) leading to the formation of (Me(2)ClSi)(Me(3)Si)N-N(SiMe(3))-P(Me)R, which crystallize as ECl(3) adducts. The free hydrazinophosphanes can be obtained by removal of the Lewis acid with the help of a strong base such as 4-(dimethylamino)pyridine (DMAP).     

Oxido-bridged di-, tri-, and tetra-nuclear iron complexes bearing bis(trimethylsilyl)amide and thiolate ligands

A series of di-, tri-, and tetra-nuclear iron-oxido clusters with bis(trimethylsilyl)amide and thiolate ligands were synthesized from the reactions of Fe{N(SiMe(3))(2)}(2) (1) with 1 equiv of thiol HSR (R = C(6)H(5) (Ph), 4-(t)BuC(6)H(4), 2,6-Ph(2)C(6)H(3) (Dpp), 2,4,6-(i)Pr(3)C(6)H(2) (Tip)) and subsequent treatment with O(2). The trinuclear clusters [{(Me(3)Si)(2)N}Fe](3)(μ(3)-O){μ-S(4-RC(6)H(4))}(3) (R = H (3a), (t)Bu (3b)) were obtained from the reactions of 1 with HSPh or HS(4-(t)BuC(6)H(4)) and O(2), while we isolated a tetranuclear cluster [{(Me(3)Si)(2)N}(2)Fe(2)(μ-SDpp)](2)(μ(3)-O)(2) (4) as crystals from an analogous reaction with HSDpp. Treatment of a tertrahydrofuran (THF) solution of 1 with HSTip and O(2) resulted in the formation of a dinuclear complex [{(Me(3)Si)(2)N}(TipS)(THF)Fe](2)(μ-O) (5). The molecular structures of these complexes have been determined by X-ray crystallographic analysis.     

Structure, reactivity, and density functional theory analysis of the six-electron reductant, [(C5Me5)2U]2(mu-eta6:eta6-C6H6), synthesized via a new mode of (C5Me5)3M reactivity

The sterically crowded (C(5)Me(5))(3)U complex reacts with KC(8) or K/(18-crown-6) in benzene to form [(C(5)Me(5))(2)U](2)(mu-eta(6):eta(6)-C(6)H(6)), 1, and KC(5)Me(5). These reactions suggested that (C(5)Me(5))(3)U could be susceptible to (C(5)Me(5))(1-) substitution by benzene anions via ionic salt metathesis. To test this idea in the synthesis of a more conventional product, (C(5)Me(5))(3)U was treated with KN(SiMe(3))(2) to form (C(5)Me(5))(2)U[N(SiMe(3))(2)] and KC(5)Me(5). 1 has long U-C(C(5)Me(5)) bond distances comparable to (C(5)Me(5))(3)U, and it too is susceptible to (C(5)Me(5))(1-) substitution via ionic metathesis: 1 reacts with KN(SiMe(3))(2) to make its amide-substituted analogue [[(Me(3)Si)(2)N](C(5)Me(5))U](2)(mu-eta(6):eta(6)-C(6)H(6)), 2. Complexes 1 and 2 have nonplanar C(6)H(6)-derived ligands sandwiched between the two uranium ions. 1 and 2 were examined by reactivity studies, electronic absorption spectroscopy, and density functional theory calculations. [(C(5)Me(5))(2)U](2)(mu-eta(6):eta(6)-C(6)H(6)) functions as a six-electron reductant in its reaction with 3 equiv of cyclooctatetraene to form [(C(5)Me(5))(C(8)H(8))U](2)(mu-eta(3):eta(3)-C(8)H(8)), (C(5)Me(5))(2), and benzene. This multielectron transformation can be formally attributed to three different sources: two electrons from two U(III) centers, two electrons from sterically induced reduction by two (C(5)Me(5))(1-) ligands, and two electrons from a bridging (C(6)H(6))(2-) moiety.     

The synthesis and reactivity of polysilylacetylenes: Diels—Alder reactions to give bis (silyl) benzenes

Six bis(silyl)acetylenes (XMe²Si? C?C? SiMe₂X) with the following varied silicon substituents X were prepared: 1 (Me, Me); 2 (H, H); 3 (C1, H); 4 (CI, CI); 5 (MeO, H); 6 (MeO, MeO). While 1 and 2 may be prepared by the reaction of dilithio- or bis(bromomagnesium)-acetylide with the appropriate chlorosilane, similar reactions designed to give 3–6 yielded oligomers, XMe₂Si? (? C?C? SiMe₂)_n? X, 7, X=CI, MeO, as the major products, indicating that the acetylenic functionality on silicon activates the chlorosilane towards nucleophilic substitution. Compounds 3 and 4 were prepared by free radical chlorination of 2. Methanolysis of 3 and 4 gave quantitative yields of 5 and 6 respectively. Compounds 1–6 undergo a Diels–Alder reaction with α-pyrone to produce, after loss of carbon dioxide, bis(silyl)-substituted benzene derivatives. The order of reactivity has been determined to be: 4=6>3=5>1>2, indicating that chloro or alkoxy substituents favor the cycloaddition with 2- pyrone. The adducts formed by compounds 3–6 undergo an unusually facile hydrolysis or elimination to give 1,1,3,3-tetramethyl-1,3-disila-2-oxaindane.