Immersion calorimetry as a tool to evaluate the catalytic performance of titanosilicate materials in the epoxidation of cyclohexene

Different types of titanosilicates are synthesized, structurally characterized, and subsequently catalytically tested in the liquid-phase epoxidation of cyclohexene. The performance of three types of combined zeolitic/mesoporous materials is compared with that of widely studied Ti-grafted-MCM-41 molecular sieve and the TS-1 microporous titanosilicate. The catalytic test results are correlated with the structural characteristics of the different catalysts. Moreover, for the first time, immersion calorimetry with the same substrate molecule as in the catalytic test reaction is applied as an extra means to interpret the catalytic results. A good correlation between catalytic performance and immersion calorimetry results is found. This work points out that the combination of catalytic testing and immersion calorimetry can lead to important insights into the influence of the materials structural characteristics on catalysis. Moreover, the potential of using immersion calorimetry as a screening tool for catalysts in epoxidation reactions is shown.     

Half-sandwich molybdenum complexes: molecular structure and catalyst precursors for olefin epoxidation with tert-butyl hydroperoxide

1. Download high-res image (129KB)
2. Download full-size image

     

Synthesis, structural elucidation, and application of a pyrazolylpyridine-molybdenum oxide composite as a heterogeneous catalyst for olefin epoxidation

The reaction of [MoO(2)Cl(2)(pypzEA)] (1) (pypzEA = ethyl[3-(pyridin-2-yl)-1H-pyrazol-1-yl]acetate) with water in a Teflon-lined stainless steel autoclave (100 °C) or in an open reflux system leads to the isolation of the molybdenum oxide/pyrazolylpyridine composite material [Mo(2)O(6)(HpypzA)] (2; HpypzA = [3-(pyridinium-2-yl)-1H-pyrazol-1-yl]acetate). The solid state structure of 2 was solved through single crystal and powder X-ray diffraction analyses in conjunction with information derived from FT-IR and (13)C CP MAS NMR spectroscopies and elemental analyses. In the asymmetric unit of 2, two crystallographically distinct Mo(6+) centers are bridged by a syn,syn-carboxylate group of HpypzA. The periodic repetition of these units along the a axis of the unit cell leads to the formation of a one-dimensional composite polymer, (∞)(1)[Mo(2)O(6)(HpypzA)]. The outstretched pyrazolylpyridine groups of adjacent polymers interdigitate to form a zipper-like motif, generating strong onset π-π contacts between adjacent rings of coordinated HpypzA molecules. The composite oxide 2 is a stable heterogeneous catalyst for liquid-phase olefin epoxidation.     

Synthesis and characterization of complexes containing Ti-O-Si moieties. Catalytic activity in olefin epoxidation

Reaction of [Cp*TiMe3] with O(SiPh2OH)2 yields the titanium siloxide derivative [Cp*TiMe{(OSiPh2)2O}]. Complex reacts with H2O to yield the corresponding oxo-titanium derivative [(Cp*Ti{(OSiPh2)2O})2(micro-O)]. The molecular structure of complex has been established by X-ray diffraction. Complex reacts with triphenylsilanol to give the asymmetric titanium siloxide [Cp*Ti(OSiPh3){(OSiPh2)2O}]. Treatment of the dinuclear titanium compound [(Cp*TiCl2)2(micro-O)] with an equimolar amount of O(SiPh2OH)2 yields complex [(Cp*TiCl)2{micro-(OSiPh2)2O}(micro-O)] in which the disiloxide moiety is bridging two titanium atoms. The structure of has been determined by X-ray diffraction. Reaction of [Cp*TiMe3] with HOSiPh3 yields the titanium triphenylsiloxide [Cp*TiMe2(OSiPh3)]. Complex reacts with water to yield [{Cp*TiMe(OSiPh3)}2(micro-O)]. The triflate compound [Cp*Ti(OSiPh3)2(OTf)] can be prepared by reaction of with HOTf and triphenylsilanol. We have tested the catalytic activity of some of the complexes in the epoxidation of cyclohexene.     

1-Amino-1-hydrazino-2,2-dinitroethene and corresponding salts: synthesis, characterization, and thermolysis studies

Synthesis, characterization, and thermolysis studies of 1-amino-1-hydrazino-2,2-dinitroethene (2) and salts thereof are reported. These compounds have been fully characterized by IR and NMR spectroscopy, elemental analysis, differential scanning calorimetry (DSC), density, and impact sensitivity measurements. Compound 2 decomposes at 124.5 °C (DSC) and the salts decompose over the range 138.6-181.6 °C, thus showing higher thermostability. The calculated detonation pressures (P) for these salts range from 27.2 to 37.8 GPa, and detonation velocities (vD) fall between 8424 to 9482 m s(-1); these properties make them competitive energetic materials.     

MTO Schiff-base complexes: synthesis, structures and catalytic applications in olefin epoxidation

Several Schiff-base ligands readily form complexes with methyltrioxorhenium(VII) (MTO) by undergoing a hydrogen transfer from a ligand-bound OH group to a ligand N atom. The resulting complexes are stable at room temperature and can be handled and stored in air without problems. Due to the steric demands of the ligands they display distorted trigonal-bipyramidal structures in the solid state, as shown by X-ray crystallography, with the O(-) moiety binding to the Lewis acidic Re atom and the Re-bound methyl group being located either in cis or trans position to the Schiff base. In solution, however, the steric differences seem not to be maintained, as can be deduced from (17)O NMR spectroscopy. Furthermore, the Schiff-base ligands exchange with donor ligands. Nevertheless, the catalytic behaviour is influenced significantly by the Schiff bases coordinated to the MTO moiety, which lead either to high selectivities and good activities or to catalyst decomposition. A large excess of ligand, in contrast to the observations with aromatic N-donor ligands, is detrimental to the catalytic performance as it leads to catalyst decomposition.     

Heterogenisation of CpMo(CO)3Cl on mesoporous materials and its application as olefin epoxidation catalyst

CpMo(CO)(3)Cl reacts with the hydroxyl (Si-OH or Si-OH-Al) functionalities of mesoporous molecular sieves such as MCM-41, MCM-48 and its aluminium analogues during grafting. XRD, N(2) adsorption-desorption, BET surface area analysis and TEM show the resulting samples as being well ordered and maintaining a uniform pore size. FT-IR spectra, elemental analysis, (13)C and (29)Si CP MAS NMR spectra confirm the successful grafting. In the presence of excess TBHP the materials show high activity in cyclooctene epoxidation and good stability.     

Ansa-bridged eta5-cyclopentadienyl molybdenum and tungsten complexes: synthesis, structure and application in olefin epoxidation

Ansa-bridged eta(5)-cyclopentadienyl molybdenum and tungsten tricarbonyl complexes of formula [M(eta(5)-C(5)H(4)(CH(2))(3)-eta(1)-CH(2))(CO)(3)] (M=Mo or W) were synthesized and the X-ray crystal structure of the tungsten complex is reported. In the epoxidation of cyclooctene the molybdenum compound shows a high catalytic activity, approaching the observed activities for the most reactive unbridged complexes of composition CpMo(CO)(3)X (X=Cl, CH(3)). The activity of the tungsten complex is also amongst the highest catalytic activities for the olefinic epoxidation of complexes with the composition CpW(CO)(3)X and WO(2)X(2)L(2), reported so far. The low ring strain of the ansa-bridged system improves the stability of the complexes under oxidative conditions considerably in comparison to derivatives with a shorter bridge and therefore paves the way to introduction of chirality in these systems.     

Group 4 metallocene complexes with non-bridged and tetramethyldisiloxane-bridged methyl-phenyl-cyclopentadienyl ligands: synthesis, characterization and olefin polymerization studies

The non-vicinal methyl-phenyl-substituted zirconocene dichlorides meso-and rac-[Zr{η⁵-(1-Ph-3-Me-C₅H₃)}₂Cl₂] and [Zr(η⁵-C₅H₅){η⁵-(1-Ph-3-Me-C₅H₃)}Cl₂] have been isolated by transmetallation of the lithium salt Li(1-Ph-3-Me-C₅H₃) to ZrCl₄(THF)₂ and [Zr(η⁵-C₅H₅)Cl₃ · DME] (DME = dimethoxyethane), respectively. Similar transmetallation of the lithium salt Li₂[(Me-Ph-C₅H₂SiMe₂)₂O] to MCl₄ gave the ansa-metallocenes [M{η⁵-(Me-Ph-C₅H₂SiMe₂)₂O}Cl₂] (M = Zr, Hf) for which the meso- and rac-diastereomers were separated. The dimethyl and dibenzyl derivatives of these metallocenes were also prepared and the structure of all of these compounds determined by NMR spectroscopy. The molecular structure of rac-[Zr{η⁵-(2-Me-4-Ph-C₅H₂SiMe₂)₂O}Cl₂] was determined by single crystal X-ray diffraction methods. The activity of the dichlorometallocenes/MAO catalysts for ethene and propene polymerization was evaluated.     

New binuclear ferrocenecarboxylates of rare-earth metals as precursors for ferrites: Syntheses,structures, and solid-phase thermolysis

New ferrocenecarboxylates of rare-earth metals, [Ln₂(μ-O,η²-OOCFc)₂(μ₂-O,O′-OOCFc)₂(η²-NO₃)₂(DMSO)₄] (Ln = Gd (I), Tb (II), and Y (III)) and [Gd₂(μ-O,η²-OOCFc)₂(η²-OOCFc)₄(DMSO)₂(H₂O)₂] · 2DMSO · 2CH₂Cl₂ (IV), are synthesized and characterized by X-ray diffraction analysis. Unlike all earlier known ferrocenecarboxylates of rare-earth metals, in isostructural compounds I–III the Ln atoms are linked by four bridging carboxyl residues, two of which are chelate-bridging (the coordination number of Ln is 9). Binuclear structure IV is formed by two chelate-bridging carboxylate ligands (the coordination number of Gd is 9). Weak antiferromagnetic and weak ferromagnetic interactions between the Gd atoms are observed in complexes I and IV, respectively. The thermal decomposition of the synthesized compounds is studied by differential scanning calorimetry and thermogravimetry. According to the X-ray diffraction data, the final thermolysis products of the complexes in air are garnets Ln₃Fe₅O₁₂.     

Meso-tetracinnamylporphyrin: Synthesis,characterization and the catalytic activity of its Mn(III) complex in olefin epoxidation with tetra-n-butylammonium hydrogen monopersulfate

Meso-tetracinnamylporphyrin (H₂tcp) has been synthesized and characterized by UV–Vis, ¹H NMR and IR spectroscopies. Protonation of H₂tcp with HCl is accompanied by a blue shift (77 cm⁻¹) of the Q(0,0) band, probably indicating a decrease in the efficiency of the π-electron donation from the meso-substituents to the a_2u orbital in comparison with the corresponding dication of meso-tetraphenylporphyrin (H₂tpp). The unusual NH signal multiplicity observed in ¹H NMR spectrum of H₂tcp shows evidence of a long distance coupling between the vinyl protons and NH ones. This long range coupling can occur between the remote centers using the a_2u orbital as a connector. Mntcp(OAc) shows higher catalytic activity (ca. 1.2-fold higher) than Mntpp(OAc) in olefin epoxidation with tetra-n-butylammonium hydrogen monopersulfate (TBAO). The low ratio (∼1.5) of cis- to trans-stilbene oxide, in competitive oxidation of cis- and trans-stilbene with TBAO, strongly suggests the involvement a common high-valent manganese oxo complex as the reactive intermediate responsible for oxygen atom transfer.     

Synthesis, structural characterization, and molecular modeling of dodecaniobate keggin chain materials

Four new isostructural one-dimensional dodecaniobate Keggin materials, Na12[Ti2O2][TNb12O40] x xH2O and Na10[Nb2O2][TNb12O40] x xH2O with T = (Si or Ge), have been synthesized hydrothermally using a Lindqvist-ion salt, Na7[Nb6O19H] x 15H2O, as the precursor. Their structure, consisting of chains of Keggin ions [TNb12O40]16- linked by [Ti2O2]4+ or [Nb2O2]6+ bridges, was solved ab initio from powder diffraction data. The location of the charge-balancing sodium atoms and the water molecules was further investigated by molecular simulations. These compounds were also characterized by IR and solid-state 1H, 29Si, and 23Na MAS NMR spectroscopies. The structural relationships between these and related phases based on similar Keggin ion building units are discussed.     

Reactivity of aqua coordinated monoporphyrinate lanthanide complexes: synthetic, structural and photoluminescent studies of lanthanide porphyrinate dimers

Dimerization of monoporphyrinate lanthanide complexes [Yb(Por)(H(2)O)(3)]Cl, (Por = TTP(2-), TMPP(2-) and TPP(2-)) in the presence of sterically hindered tripodal ligand, zinc Schiff-base, dilute HCl, K(2)CO(3) solution, 4,4'-bipyridine (bipy), and basic 8-hydroxyquinaldine (HQ) solution was observed in CH(2)Cl(2) at room temperature. Six neutral dimeric lanthanide porphyrinate complexes, [Yb(TTP)(mu-OH)](2)(mu-THF) (1), [Yb(TMPP)(mu-OH)(H(2)O)](2) (2), [Yb(TPP)(mu-OH)(mu-H(2)O)](2) (4), [Yb(TMPP)(mu-Cl)(H(2)O)](2) (5), [Yb(TMPP)(mu-OH)](2)(THF) (6) and [Yb(TPP)](2)(mu-OH)(mu-Q) (7), were obtained. X-Ray diffraction studies showed that for the dimers, the two lanthanide ions were bridged by OH(-), Cl(-) or H(2)O. Photoluminescent studies showed that the porphyrinate dianion acted as an antenna, transferred its absorbed visible energy to the lanthanide ion and enabled the latter emitting in the near-infrared (NIR) region. In general, the NIR emission is more intense for the dimers than for the monomers, and the NIR emission intensity decreases as the number of O-H oscillators present in the molecule increases.     

Chiral ansa-bridged η-cyclopentadienyl molybdenum complexes: Synthesis, structure and application in asymmetric olefin epoxidation

Ansa-bridged η⁵-cyclopentadienyl carbonyl molybdenum complexes were synthesized with stereogenic centers located in the side chain. An exemplary X-ray crystal structure and the catalytic activity for asymmetric olefin epoxidation are reported. In non-chiral epoxidation the compounds show a good catalytic activity, comparable to activities observed for the related non-chiral complexes of composition CpMo(CO)₃X (X = Cl, CH₃). For the asymmetric epoxidation of trans-β-methylstyrene the chiral induction is up to ca. 20%. The high ring strain of the ansa-bridged system hampers, unfortunately, its stability under oxidative condition.     

Synthesis, characterization, and photodegradation behavior of single-phase anatase TiO2 materials synthesized from Ti-oxychloride precursors

Single-phase anatase-TiO2 nanomaterials with a size of ca. 10 nm and variable quantities of anion impurities were prepared using a novel pathway based on the use of amorphous ammonium Ti-oxychloride precursors synthesized using Ti/Cl initial ratios between 1 and 6. The precursor nature and evolution under thermal treatment were studied using chemical analysis, XRD, XPS, DRIFTS, and mass spectrometry. The nature and concentration of anatase-TiO2 materials anion impurities were analyzed by XPS and DRIFTS. It is shown that negatively charged impurities located in substitutional positions of the anatase network are maximized for a sample synthesized using a Ti/Cl 1:1 atomic ratio and are responsible for the elimination of liquid-phase (phenol) and gas-phase (isopropanol or methylcyclohexane) pollutants under sunlight excitation. A link is established among the initial chemical characterization of the precursors, the final morphological, structural, and chemical composition of the oxide materials, and their photochemical properties.     

Imino(phenoxide) compounds of magnesium: Synthesis,structural characterization,and polymerization studies

A plethora of magnesium compounds containing imino(phenoxide) (1–4) and bis(imino)phenoxide (5–10) ligand backbone have been synthesized via the reaction of diethyl magnesium with two equivalent of the corresponding ligand. These compounds were completely characterized by different spectroscopic techniques and elemental analyses. The monomeric nature of the magnesium complexes 3 , 5 , 6 , 9 , and 10 were further confirmed by single crystal X‐ray diffraction studies. The magnesium centers posses distorted trigonal bipyramidal geometry. The controlled hydrolysis compound Mg₇O₈ (C₂₂H₂₈NO₂)₆ ( 11 ) was adequately characterized using ¹H, ¹³C NMR, ESI‐MS, and the biscubane structure was further confirmed by single crystal X‐ray diffraction studies. The Mg₇O₈ core is deeply embedded with the ligand periphery. These compounds (1–10) were found to be active towards the bulk ring opening polymerization (ROP) of lactides, yielding polymers with high number average molecular weight (M_n) and controlled molecular weight distributions (MWDs). In addition, these compounds have been shown to be highly active toward the copolymerization of carbon dioxide with cyclohexene oxide and styrene oxide. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1474–1491     

Bis-dioxomolybdenum (VI) oxalyldihydrazone complexes: Synthesis,characterization, DFT studies,catalytic epoxidation potential,molecular modeling and biological evaluations

Two cis-bis-dioxomolybdenum oxalylsalicylidenedihydrazone complexes (MoO₂L1 and MoO₂L2) were synthesized via the complexation of dioxomolybdenum (VI) acetylacetonate with oxalylsalicylidenedihydrazone (H₂L1) and p-sodium sulfonate oxalylsalicylidenedihydrazone (H₂L2) bis-Schiff base chelating ligands, respectively. The structures of the newly synthesized complexes were confirmed by ¹H- and ¹³C-NMR, IR, ultraviolet–visible and mass spectra, as well as elemental analyses (EA) and conductivity measurements. The spectrophotometric continuous variation method revealed the formation of 2: 1 (metal: ligand molar ratios). DFT studies were applied for the ligands and their Mo-chelates. Interestingly, the bis-MoO₂(VI) oxalyldihydrazone complexes showed remarkable catalytic sufficiency towards the selective (ep)oxidation of 1,2-cyclooctene, benzyl alcohol and thiophene using H₂O₂ or tert-butyl hydroperoxide (tBuOOH) at 85 °C. Under aqueous conditions, the MoO₂L2 (with p-sodium sulfonate substituent) exhibited superior that of the MoO₂L1 (without p-NaSO₃―group), highlighting the role of sodium sulfonate substituent in the catalytic progress of the Mo-chelate. The ligands (H₂L1 and H₂L2) and their corresponding Mo-complexes (MoO₂L1 and MoO₂L2) were assessed for their antitumor and antimicrobial activities. Furthermore, the antioxidant activity was also evaluated using the 2,2-diphenyl-1-picrylhydrazyl (DPPH) and superoxide dismutase (SOD) assays. The binding nature between the Mo-complexes and calf thymus DNA (ctDNA) was also studied within spectroscopic and hydrodynamic techniques.