反相高效液相色谱法同时测定丁酸氯维地平中10种相关杂质

建立反相高效液相色谱辅-光电二极管阵列检测器(RP-HPLC)法同时测定丁酸氯维地平原料药中的10种杂质。色谱柱为Symmetry C18柱(250 mm×4.6 mm,5μm),流动相为0.05 mol/L Na H2PO4溶液(pH 2.5)-乙腈/甲醇(3∶2,V/V),梯度洗脱,柱温35℃,流速为1.5 m L/min,检测波长220 nm。丁酸氯维地平及其10个已知杂质能够达到良好的分离,且各组分在各自测定浓度范围内与峰面积的线性关系良好(r≥0.9970);丁酸氯维地平及杂质1~10的检出限(S/N=3)在0.15~0.90 mg/L之间。本方法快速、简便、有效,可用于丁酸氯维地平原料药的质量控制管理。     

在线二维液相色谱-四极杆飞行时间质谱法检测头孢噻吩钠的杂质谱

建立了在线二维液相色谱-四极杆飞行时间质谱检测头孢噻吩钠杂质谱的方法,有效地解决了流动相中含不挥发性磷酸盐的色谱系统不适合用于液相色谱-质谱快速鉴定杂质的难题。一维高效液相色谱(HPLC)以Symmetry C18为色谱柱,以磷酸盐缓冲液(pH 2.5)和乙腈梯度洗脱;二维以ACQUITY UPLC BEH C18为色谱柱,以0.1%(v/v)甲酸水溶液和0.1%(v/v)甲酸乙腈溶液梯度洗脱。以HLB C18为捕集柱,用0.1%(v/v)甲酸水溶液进行捕集和脱盐,采用正离子模式采集数据。对头孢噻吩钠中6个杂质进行了结构鉴定,对其来源进行了分析,并进一步确证了《中国药典》2010年版对头孢噻吩钠杂质A认定有误。采用本方法可以快速、简便、灵敏地对头孢噻吩钠杂质谱进行检测。     

高效液相色谱-四极杆飞行时间质谱法快速鉴定硝苯地平原料药中杂质

利用高效液相色谱-四极杆飞行时间质谱法(HPLC-QTOF MS)对硝苯地平原料药的4种杂质进行了在线的质谱分析。色谱柱为Kromasil C18(250 mm×4.6 mm, 5 μm),流动相为甲醇-水(60:40, v/v),检测波长为235 nm。通过紫外检测器和四极杆飞行时间质谱仪在线检测,分离并检测了硝苯地平及其杂质,获得了它们的紫外光谱和质谱数据;通过比较加合质子的硝苯地平和杂质的准分子离子的碎裂特征,直接推断出了3个杂质可能的结构,其中1个为未知杂质;采用与对照品保留时间和质谱数据的比对,确定了另外1个杂质的结构。实验表明,HPLC-QTOF MS可以快速鉴定硝苯地平中杂质的化学成分。     

直链淀粉手性固定相高效液相色谱法分离泮托拉唑钠对映体及应用

用手性固定相法拆分泮托拉唑钠对映体,并建立了检测泮托拉唑钠对映体光学纯度的HPLC方法.色谱柱为chiRALPAK AD-H柱(250×4.6 mm,5 μm),流动相为V(正已烷):V(异丙醇)=40:60,流速为0.5 mL/min,检测波长为288 nm.该法可用于左旋泮托拉唑钠原料药和制剂的质量控制.     

高效液相色谱法测定高纯度苯肼

建立了高纯度苯肼的高效液相色谱测定方法。在流动相中加入抗氧剂和色谱改性剂(M),很好解决了苯肼色谱峰拖尾问题,可准确测定高纯苯肼中杂质含量。优化条件是:Agilent hc-C18色谱柱(150×4.6mm,5μm);流动相为甲醇-水(体积比40∶60)其中所含抗氧剂、色谱改性剂(M)、K2HPO4-KH2PO4浓度均为0.02mol/L;流速1.0mL/min;进样量20μL;检测波长272nm。高纯苯肼中所含杂质苯胺、苯酚以及联苯胺,在5~120μg/mL范围内均具有良好的线性关系,相关系数r>0.9993。     

二维液相色谱法在线检测哈茨木霉发酵液中2460A含量

建立了在线检测哈茨木霉发酵液中微量2460A的二维液相色谱方法。利用Ultimate 3000双三元液相色谱仪,采用阀切换二维色谱技术,组合3根色谱柱实现2460A的在线净化、富集和含量检测。净化柱采用资生堂MF C8柱(10 mm×4.6 mm,5.0μm),富集柱采用资生堂MGC18柱(20 mm×4.6 mm,5.0μm),以水-甲醇为流动相,梯度洗脱,流速2.0 m L/min;二维分析柱采用Thermo Hypersil GOLD C18柱(250 mm×4.6 mm,5.0μm),以水-甲醇为流动相,梯度洗脱,流速1.0 m L/min;进样量1.0 m L;柱温40℃;检测波长424 nm。方法验证结果显示,2460A的线性范围为0.0025~10.0 mg/L(r=0.9981,n=8),检出限为1.2μg/L;定量限为2.5μg/L;方法回收率为88.0%~104.4%。     

高分辨热裂解气相色谱/质谱法快速定性检测农产品中的单增李斯特菌

要在高分辨率热裂解气相色谱/质谱(HRPGC/MS)系统中采用选择离子检测法(SIM),建立了准确可靠、灵敏度高、快速简便的检测农产品中单增李斯特菌的方法.裂解条件:起始温度50℃;升温速率20℃/min,裂解室温度230℃;裂解温度650℃;裂解时间为10 s.气相色谱条件:载气为氦气;恒定流速0.9 mL/min;DB-WAXTER毛细管色谱柱;起始温度45℃;保持4min,以6℃/min的速率上升到100℃,然后以10℃/min上升到200℃,接着以12℃/min上升至250℃,并保持25 min.分流比为50∶1.EI离子源.选择色谱保留时间19.056 min,鉴别离子m/z 54,98,用于SIM检测.通过对单增李斯特菌、2种空白农产品和2种不同农产品污染单增李斯特菌的样品检测结果表明,HRPGC/MS方法检测不同黄瓜、牛肉农产品中单增李斯特菌,均能得到很好的反映.本方法分析时间缩短,用保留时间、质谱同时定性,消除了不同种类农产品杂质的干扰,结果准确可靠,选择性和重复性好,适于快速检测农产品中的单增李斯特菌.     

高效液相色谱-串联质谱法分离鉴定绿原酸及其相关杂质

建立了高效液相色谱-串联质谱法（HPLC-MS/MS)分离和鉴定绿原酸及其相关杂质的方法。采用C18色谱柱(5 μm,4.6 mm×150 mm),乙腈-水（含0.1%甲酸）(体积比为8∶92)为流动相,经HPLC-MS/MS和HPLC-二极管阵列检测器在线检测,对工业绿原酸中的奎尼酸、咖啡酸、绿原酸同分异构体等8个相关杂质的结构进行了鉴定。     

纤维素衍生物手性固定相高效液相色谱法分离盐酸川丁特罗对映体

以纤维素三-(3,5-二甲基苯基氨基甲酸酯)为手性固定相(Lux Cellulose-1),建立了在正相色谱条件下直接分离盐酸川丁特罗对映体的高效液相色谱法。考察了乙醇、异丙醇等有机改性剂,三氟乙酸、二乙胺等流动相添加剂和柱温对对映体分离的影响。结果显示,酸性和碱性添加剂对对映体分离的影响最为显著: 添加二乙胺时两对映体无分离趋势;添加三氟乙酸时对映体保留强,且分离趋势明显;而同时添加三氟乙酸和二乙胺则两对映体分离显著改善,分离度可达4.0。优化后的色谱条件: 色谱柱为Lux Cellulose-1手性柱(250 mm×4.6 mm, 5 μm),流动相为正庚烷-乙醇-三氟乙酸-二乙胺(88:12:0.3:0.05, v/v/v/v),流速为1.0 mL/min,紫外检测波长为246 nm,柱温为25 ℃。该方法简便,快速,可用于左旋盐酸川丁特罗原料中右旋异构体杂质的检查。     

高效液相色谱-共振瑞利散射联用测定大鼠血清中依替米星

应用高效液相色谱-共振瑞利散射联用技术建立了测定依替米星的新方法。采用滂胺天蓝作为分子探针,共振瑞利散射(RRS)检测波长设为λex=λem=361nm,通过优化分子探针浓度、分子探针流速、柱后管长和pH等影响因素,确定了最佳实验条件,在该条件下依替米星的检出限(信噪比为3)为1.0mg/L。以妥布米星为内标物,以内标法定量,依替米星与妥布米星的峰面积比与依替米星的质量浓度之间的线性响应范围为2.5～60mg/L。将该方法应用于大鼠血清中依替米星的药代动力学研究,结果满意。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.