Use of Gold Nanoparticles Protected with Isonicotinic Acid and Tris(2-Aminoethyl)amine for Manufacturing Colloidal Films and Composites with Carbon and Oxide Materials

We have studied the usefulness of alcoholic dispersions of Au nanoparticles (NPs) stabilized by isonicotinic acid (INA) and tris(2-aminoethyl)amine (TAEA) for manufacturing colloidal films on glass substrates and composites with nanosized carbon materials (based on nanotubes (NTs) and a porous carbon material (PCM)) and oxide powders (Al₂O₃, SiO₂, and CeO₂).     

Sintering studies on Ni–Cu–YSZ SOFC anode cermet processed by mechanical alloying

New 40 vol%[(Cu)–Ni]–YSZ cermet materials processed by mechanical alloying (MA) of the row powders are prepared. The powder compacts are sintered in air, hydrogen and inert (argon) atmospheres at a dilatometer and tubular furnace up to 1,350 °C. Sintering by activated surface concept (SAS) can anticipate and enhance the densification in such powders. Stepwise isothermal dilatometry (SID) sintering kinetics study is performed allowing determining kinetic parameters for Ni–YSZ and Ni–Cu–YSZ pellets. Two-steps sintering processes is indicated while Cu-bearing material features the smallest activation energy for sintering. The allied MA–SAS method is a promising route to prepare SOFC fuel cell anode materials.     

Y2O3/ZrO2中空纤维陶瓷膜的制备与表征

本文结合相转化技术和干湿法纺丝工艺制备了以YSZ(以摩尔分数为8%的Y2O3稳定的ZrO2)为原料的中空纤维陶瓷膜, 考察了YSZ粉体的粒度分布和形貌, 并研究了YSZ中空纤维陶瓷膜的气密性、 孔特性、 机械性能、 微观结构及晶型变化等.     

Chemical Bonding and Atomic Structure in Y(2) O(3) :ZrO(2) -SrTiO(3) Layered Heterostructures

Repeating boundaries: The buried interfaces in artificial heterostructures produced by sequential deposition of nanosized units are critical to their properties. With density functional theory it was shown that in Y(2) O(3) :ZrO(2) (YSZ) and SrTiO(3) (STO) heterostructures reconstruction of the interfaces between the component units is required to access the most favorable structure.     

Nanostructured oxide-based powders: investigation of the growth mode of the CeO2 clusters on the YSZ surface

CeO(2)/YSZ nanocomposite powders, characterized by increasing Ce/Zr atomic ratio, were obtained by depositing, by wet impregnation, different amounts of CeO(2) on the yttria-stabilized zirconia (YSZ) surface. These powders were characterized by means of X-ray photoelectron spectroscopy, transmission electron microscopy, energy dispersive spectroscopy, and X-ray diffraction. Experimental results allow us to obtain interesting information concerning the growth mode, the morphology, and the dimensions of the CeO(2) clusters on the YSZ supporting surface. A 3-D growing mechanism was observed for the CeO(2) nanoparticles. With increasing Ce/Zr atomic ratio the CeO(2) clusters become more and more spherical. Moreover, XPS data also show the presence of Ce(III) and Ce(IV) ions at the interface supported/supporting oxides.     

A New Method of Synthesis of Nanosized Boehmite (AlOOH) Powders with a Low Impurity Content

A new method of synthesis of nanosized aluminum oxyhydroxide (AlOOH, boehmite) powders has been suggested through a hydrothermal treatment of nanosized γ-Al₂O₃ powder in water and a 1.5 wt % HCl solution at different temperatures. It has been found that hydrothermal treatment in a 1.5 wt % HCl solution leads to the purification of the starting material; different treatment durations allow one to obtain boehmite particles of different shape. It has been demonstrated that a nanosized boehmite powder is obtained upon the hydrothermal treatment of a nanosized γ-Al₂O₃ in water above 80°С. The nanosized boehmite powders synthesized at different temperatures have been studied by various methods.     

Mg-Al-CO3水分散液的稳定性及流变性

水滑石;水分散体系;层状结构;Mg-Al-CO3水分散液的稳定性及流变性     

TiO2修饰La0.6Sr0.4Co0.2Fe0.8O3-δ用于中温固体氧化物燃料电池的阴极

纳米TiO2修饰的La0.6Sr0.4Co0.2Fe0.8O3-δ(LSCF)阴极被直接应用于YSZ电解质电池上. TiO2可阻止LSCF和YSZ间的化学反应,抑制SrZrO3的形成. LSCF-0.25 wt% TiO2阴极电池在0.7 V和600°C下的电流密度是LSCF阴极电池的1.6倍.电化学阻抗谱结果表明, TiO2修饰显著加快了氧离子注入电解质的过程,这可能与TiO2抑制了阴极/电解质界面处高电阻SrZrO3层的形成有关.本文为在ZrO2基电解质上使用高性能的(La,Sr)(Co,Fe)O3阴极材料提供了一种简单有效的方法.     

RHEOLOCY OF AQUEOUS DISPERSIONS OF ALUMINA,TITANIA AND MIXTURE OF ALUMINA AND TITANIA POWDERS

The electrophoretic mobility and rheology of alumina, titania and alumina / titania powder mixtures ( ratio of alumina : titania 1 : 2 and 2 : 1 ) were investigated in aqueous suspensions in the pH range 3 - 10. The results suggest that the electrophoretic mobility of the individual powders is independent of the particle concentration, but the electrokinetic behavior of the powder mixture depends upon the concentration of the individual constituents. The rheology of all the suspensions is charge related and while alumina and alumina / titania ( ratio 2 : 1 ) flocculate at pH 9.0 both titania and alumina / titania ( ratio 1 : 2 ) form low viscous dispersions. Similarly while later dispersions flocculate at pH 5.6, the former dispersions behave as Newtonian type fluids. Better correlation between the slip rheology and the electrokinetic behavior of suspensions containing both alumina and titania powders can be obtained provided the experimental results are evaluated based upon the total surface area of the individual powders but not the particle concentration.     

Synthesis and Characterization of Yttria-Stabilized Zirconia (YSZ) Nano-Clusters for Thermal Barrier Coatings (TBCs) Applications

Yttria-stabilized zirconia (YSZ) nano-clusters were synthesized by a sol–gel process. The aim was to produce YSZ powders in order to prepare thick coatings for thermal barrier to be applied on gas turbine engine components. Yttrium nitrate hexahydrate and zirconium oxy-chloride octahydrate were used as a source of zirconium, citric acid was taken as a chelating agent, and ethylene glycol was used as a polysterification agent. The synthesized powders were characterized by X-ray diffraction, transmission electron microscopy, thermo-gravimetric analysis and differential scanning calorimetry, and Raman spectroscopy. Furthermore, parameters were critically analyzed in order to synthesize non-transformable (t′) tetragonal crystal structure, which is the best zirconia phase for high temperature thermal barrier coatings applications. In this regard, tetragonal YSZ nano-clusters were heated in an alumina crucible at a temperature of 1200 °C for 100 h.     

Thermal analysis of polyaniline poly(N-vinylpyrrolidone)-stabilized dispersions

The polyaniline dispersions stabilized with poly(N-vinylpyrrolidone) (PANI/PVP) were synthesized by oxidative polymerization with different mass ratios of PANI and PVP and different molar concentrations of the components in the polymerization mixture. The composite powders prepared from colloidal PANI/PVP dispersions were characterized by thermogravimetry and differential thermal analysis. The change in the ratio of PANI and PVP as well as the starting molar concentrations of aniline hydrochloride and oxidant has influence on the resulting properties of the dispersions. Concerning the doping, the results show that PANI/PVP powders are stable up to approximately 160 °C. Degradation of polymer chains starts at temperatures above 250 °C. The PANI/PVP composite powders with lower content of PANI exhibit slightly higher thermal stability. Further, colloidal PANI/PVP dispersions were screen-printed on aluminum foil for infrared spectroscopic characterization and on poly(ethylene terephthalate) foil for electrical measurements. The sheet resistance of printed layers measured by two-point probe was of the order of tens to thousands of kΩ sq^?1. The influence of both the change in the composition and the drying temperature is discussed.     

Regularities of formation of complex oxides with the fluorite structure in the ZrO<Subscript>2</Subscript>–Y<Subscript>2</Subscript>O<Subscript>3</Subscript> system

The crystal and local structures of the complex oxides (1–x)ZrO₂ ? xY₂O₃ (YSZ) (x = 0.08–0.40) prepared by precipitation from solutions of metal salts followed by heat treatment in air were comprehensively studied by X-ray diffraction and Raman spectroscopy. Despite the same crystal structure type of the YSZ powders (cubic system, space group \(Fm\overline 3 m\) (225)), there are differences in the local structure of the samples. Comparison of the Raman spectra recorded at different laser excitation wavelengths provided the conclusion that the peaks observed in the Raman spectra of the YSZ samples with high yttrium content (x = 0.18–0.40) are likely to be due to luminescence of the powders.     

Preparation and magnetic properties of Zn-Cu-Cr-La ferrite and its nanocomposites with polyaniline

Nanosized Zn(0.6)Cu(0.4)Cr(0.5)Fe(1.5-x)La(x)O(4) (x=0 - 0.06) ferrites doped with La are synthesized by a rheological phase reaction method. Polyaniline (PANI)/ferrite nanocomposites are prepared by in situ polymerization method. The structure, morphology and ferromagnetic property of ferrite powders and nanocomposites are characterized by X-ray powder diffractometer (XRD), transmission electron microscope (TEM), Fourier transform infrared spectra (FTIR), UV-visible spectroscopy (UV), thermogravimetric analysis (TGA) and vibrating sample magnetometer (VSM). The results indicate that the PANI and nanosized ferrite powders can be combined effectively. The polymers can reduce the agglomeration of nanosized ferrite particles to some extent, which is good for the dispersedness and stabilization of nanoparticles. The PANI/ferrite nanocomposites under applied magnetic field exhibit the hysteretic loops of the ferromagnetic nature. The magnetic properties of nanocomposites are tailored by controlling the ferrite content.     

Electrorheology of suspensions of mesostructured and mesoporous silica in poly(dimethylsiloxane)

The effect of electric fields on the viscosity and shear stress of dispersions of mesostructured silicon dioxide powders and the products of their thermal treatment, that is, mesoporous silicas, in silicone oil is investigated. Mesostructured silicon dioxide powders are prepared using different structuring reagents, namely, octylamine, dodecylamine, and polyethylenimine. It is shown that the shear stresses developing in systems containing mesostructured powders as dispersed phases under the action of electric fields are several times higher than those in dispersions of mesoporous materials. The shear stresses developing in the systems containing powders of mesostructured materials as dispersed phases under the effect of electric fields depend on the nature of organic substrates present in pores and the conductivity of the systems. Electrorheological effect in dispersions of mesoporous silicas slightly depends on the structure of the materials. The observed synergism may be related to the interactions between the components of a mesostructured material, which manifest themselves as a rise in interfacial polarization. The stress-strain curves were measured upon tensile and compression in electric fields of different strengths.     

EPR of Radiation-Induced Nitrogen Centers in Hydroxyapatite: New Approaches to the Study of Electron-Nuclear Interactions

Russian Journal of Coordination Chemistry - Radiation-induced impurity nitrogen centers ( $${\text{NO}}_{3}^{{2 - }}$$ ) in nanosized powders of synthetic hydroxyapatite are studied by pulse EPR...     

Co-synthesis of nano-sized LSM–YSZ composites with enhanced electrochemical property

Nano-sized LSM–YSZ composite was co-synthesized by a glycine–nitrate process (GNP). Transmission electron microscopy revealed that the as-prepared LSM–YSZ particles consist of nano-sized powders with a dominant YSZ phase. Backscatter electron image shows that LSM and YSZ phases were regularly dispersed within the composite. Alternating current impedance measurement revealed that the co-synthesized LSM–YSZ electrode shows lower polarization resistance and activation energy than the physically mixed LSM–YSZ electrode. This electrochemical improvement would be attributed to the increase in three-phase boundary and good dispersion of LSM and YSZ phases within the composite. This paper is dedicated to Professor Su-Il Pyun on the occasion of his 65th birthday.     

Thermal diffusivity measurement of ceramic materials used in spraying of TBC systems

The basic goal of this article was thermal diffusivity characterization of ceramic materials used in thermal barrier coating (TBC) systems for depositions of the insulation layer and characterization of the materials’ morphology and remanufacturing process. The base material was oxide 8YSZ (ZrO_2? ×?8Y₂O₃), which is usually dedicated to deposition of an insulating top layer in TBC systems. The data related to thermal properties such as thermal diffusivity and thermal conductivity are widely presented in the literature, but there is lack of information about the morphological form of investigated materials, and the presented results vary widely. Data on thermal properties based on the literature sources are inadequate for the real morphological form of materials used in the experiment (e.g., massive or single crystalline material vs. plasma-sprayed coatings), which consequently gives an unsatisfactory accuracy of the obtained numerical simulations by MES methods. This article presents the characterization of thermal diffusivity of the commercial 8YSZ ceramic material synthesized or remanufactured by different routes, which is investigated in the forms of pressed powder pellet (two commercial nano-sized powders with different morphologies), sintered pellets (one commercial powder, solid-state co-precipitated reacted powder of 8YSZ type), and a two-layered coating system of In625?+?NiCrAlY/8YSZ type. The range of analysis included morphological investigations of different types of powders in initial conditions and after remanufacturing (sintering, thermal spraying) as well as the thermal diffusivity analysis by the laser flash method. The obtained data were corrected by porosity factor and compared to each other. The best similarity for obtained thermal diffusivity data was found for commercial powers of HOSP^TM type after pressing and sintering processes and calculated (2-layered model) value of thermal diffusivity for two-layered system of In625/8YSZ TBS system. The results showed that there are significant differences in thermal diffusivity values for materials with different morphological forms.

     

Solvothermal synthesis of nanosized particles of vanadium oxide

The interaction of vanadyl acetate, vanadium(V) oxide, and vanadium(V) isopropylate with capronic acid has afforded a series of nanosized vanadium oxide powders. The products structure has been studied by X-ray diffraction analysis. Both amorphous and crystalline powders of vanadium oxide can be prepared depending on the starting compound, temperature, and the synthesis duration, the V₂O₃ (karelianite) structure being in all the cases the most thermodynamically stable. Photocatalytic properties of the prepared powders have been studied.     

Effect of polyvinylpyrrolidone on the morphology and spectral luminescence of Y3Al5O12:Ce+3

Results from investigating the effect of different molecular masses and amounts of polyvinylpirrolidone (PVP) on the structural-phase, morphological, and spectral luminescence properties of YAG:Ce powders produced using a colloid chemical approach to synthesis (co-precipitation from solutions of the respective salts followed by thermal treatment of xerogels in air) are presented. The optimum thermal treatment regimes for precursors synthesized in the presence of PVP and its concentration in precipitation solutions that facilitate the formation of weakly aggregated nanosized powders of well-crystallized garnet characterized by enhanced (by a factor of 1.5–2) luminescence relative to a standard sample (without PVP) are determined.     

Thermal expansion, gas permeability, and conductivity of Ni-YSZ anodes produced by different techniques

The supported Ni-YSZ (50 wt.% Ni?+?50 wt.% Zr_0.84Y_0.16O_1.92) anodes were produced of powders, obtained by the ceramic method, combustion synthesis, deposition of nickel oxide onto the YSZ ceramics, and deposition of 28 wt.% of nickel oxide onto the 39 wt.% NiO?+?61 wt.% YSZ powders. The influence of the NiO-YSZ powder production technique, the amount of pore former and sintering temperature on the porosity, gas permeability, thermal expansion, and anode conductivity were studied. The porosity of anodes made of powders obtained by the ceramic method is always lower than the porosity of the anodes made of powders produced by combustion synthesis under otherwise equal conditions. The anode electrical conductivity greatly depends on the powder production techniques, while the anode thermal expansion is only slightly influenced by them.