Fractional sublimation of some metal chelates of thenoyltrifluoroacetone

Studies on the fractional sublimation of various metal β-diketone chelates have been extended to include the chelates of thenoyltrifluoroacetone (TTA). Many of the common metal chelates were found to be stable, to sublime readily, and to form well-defined zones in the vacuum fractional sublimator. Of the 17 chelates reported only those of manganese (II) and iron(II) were not volatile. The chelates of UO₂(II), Zr(IV), Pb(II), and Cr(III) partially decomposed during sublimation and their recovery was incomplete. The recovery of the sublimed chelates of Ni(II), Mg(II), Al(III), Pd(II), Co(II), Cu(II). Fe(III), Tl(III), Zn(II) and Be(II) ranged from 87 to 100%, with most recoveries being quantitative. The sublimation recrystallization zone temperatures of the various chelates are compared to those of the metal acetylacetonates and the benzoyltrifluoroacetonates; in general, the metal chelates of TTA sublime more readily than those of benzoyltrifluoroacetone but are potentially less useful for fractional sublimation separations than the corresponding metal acetylacetonates. Even so, a quantitative separation of iron(III) from Ni(II), Al(III), Mn(II), and Fe(II) is proposed that depends upon the fractional sublimation of the TTA chelates.     

Studies on Environmental Pollutants: Selective Separation and Recovery of Pb(II) on Ferric Phosphate Columns

Abstract

A new method is described for the recovery and selective separation of Pb(II). The following mixtures have been separated: Hg (II) -Pb (II), Zro(II) -Pb (II), Cd (II) -Pb (II), Cu (II) -Pb (II), Mn (II) -Pb(II), Zn (II) -Pb (II), Sr (II) -Pb(II) and Ni (II)-Pb (II), on ferric phosphate columns. Cu (II), Cd (II), Ni (II), Hg (II), Mn (II), Zn (II), Sr (II) and Zro(II) were eluted with 0.01M-NH₄NO₃ and Pb(II) with a mixture of 0.1M-HNO₃ + 1.0M-NH₄NO₃ solution. Proposed studies can be applied to pollution analysis and alloy analysis.     

Synthesis of Quinaldinic Acid Amide Derivative of Styrene-Divinylbenzene Copolymer and its Application in Preconcentration of Mercury (II)

Abstract

A new chelating resin has been synthesized by introducing a quinaldinic acid amide group into styrenedivinyl benzene (8%) copolymer beads. The resin is stable in fairly strong acids or alkali and has been characterized by elemental analysis for nitrogen and from i.r. spectra. The water regain value is 0.37g/g. The sorption patterns of Na(I), K(I), Ca(II), Mg(II), Pb(II), Cu(II), Ni(II), Zn(II), Cd(II), Hg(II) and Fe(III) on the chelating resin have been studied as a function of pH. The resin selectively sorbs Hg(II) ever a wide pH-range of 2.5–7.6 with high efficiency. The maximum exchange capacity for Hg(II) is 1.98 mmols g^?1 at pH 5.5. Over 99% of Hg(II) sorbed has been recovered by using 10% thiourea in 1M HClO₄ both by batch and column operations. The has been utilized in the preconcentration and recovery of Hg(II) from industrial and laboratory waste water.     

Studies on Liquid‐Liquid Extraction and Recovery of Bismuth(III) from Succinate Media Using 2‐Octylaminopyridine in Chloroform

A procedure is described for the liquid‐liquid extraction and recovery of bismuth(III) from succinate solution using 2‐octylaminopyridine (2‐OAP) as an extractant. The quantitative extraction of bismuth(III) occurs from 0.004 to 0.007 M sodium succinate solution of pH 2.5‐10 using 0.036 M 2‐OAP in chloroform. The extracted metal ion has been recovered by stripping with (3 × 10 mL) 0.5 M nitric acid. The log‐log plot of distribution ratio versus succinate concentration and distribution ratio versus 2‐OAP concentration gave slopes of 2.0 and 0.9, respectively, indicating a metal‐succinate ratio of 1:2 and a metal: 2‐OAP ratio of 1:1. The ion pair complex has a high distribution ratio in chloroform, while other solvents are poor. The extractants are stable towards prolonged acid contacts and there is no loss in its extraction efficiency even after recycling ten times. The extraction behaviour of some commonly associated metal ions, namely Ga(III), Cd(II), Zn(II), Cr(VI), Cu(II), Ba(II), Sb(III), Sn(IV), Tl(I) and Pb(II), has also been investigated. Based on partition data, conditions have been identified for attaining some separations of bismuth(III) from other metal ions; these conditions are extended for the recovery of pure bismuth from ore and alloys. Thermodynamic quantities for the extraction process were calculated.     

Recycling of Palladium and Selected Metal Ions from Simulated Spent Catalysis Waste Solution Using Novel Dithiodiglycolamides Derivatives

The present study focusing on design and evaluation of series of eight new structurally related dithiodiglycolamides (DTDGA) as a novel promising solvent extraction reagents. The influence of the nature of the alkyl chain on the distribution ratio of Pd(II) was investigated. Both N, N-di-hexyl-N′, N′-di-octyldithiodiglycolamide (DHDODTDGA) and N, N-di(2-ethylhexyl)-N′, N′-dioctyldithiodiglycolamide (DEHDODTDGA) were chosen and applied to perform the selective recovery and separation of Pd(II) from certain commonly associated elements such as Pt(IV), Rh(III), Fe(III), Cr(II), Mn(II), Zr(II), and Ni(II) contained in hydrochloric acid solutions using n-dodecane as diluent. A systematic investigation has been carried to understand the extraction behavior of Pd(II) using the synthesized extradant. The extraction equilibrium of Pd(II) was obtained within 3–4 min. The investigated extractants showed quantitative extraction of Pd(II) at ～ 4 M HCl. The main extracted species of Pd(II) at 3.5 M HCl is Pd.DTDGA and IR spectra of the extracted species have been also studied. The other investigated metals ions were found poorly extracted under the same extraction contortions. Quantitative back-extraction of Pd(II) in the organic phase was obtained in single contact using thiourea solution. The obtained results make the novel synthesized ligands a promising candidates for selective recovery and separation of Pd(II) from spent catalyst dissolver (SSCD) solution.

     

Determination of gold by substoichiometric extraction with N-thioacetyl benzamide

Estimation of gold has been successfully carried out by substoichiometric radiochemical solvent extraction method using a newly designed organic moiety, N-thioacetyl benzamide as extractant and chloroform as solvent at aqueous pH 4. The interference effects of different closely related diverse ions like Fe(III), Cu(II), Co(II), Zn(II), Ni(II) etc. were also critically studied. The validity of this method has been verified by the study of recovery of gold in mud samples.     

Multi-element preconcentration of heavy metal ions from aqueous solution by APDC impregnated activated carbon

Ammonium pyrrolidinedithiocarbamate impregnated activated carbon (APDC-AC) has been used for the preconcentration of Cd(II), Cu(II), Ni(II), and Zn(II) from aqueous solution by column solid phase extraction (SPE) technique. Trace metal ions in aqueous solution were quantitatively sorbed onto APDC-AC packed in a SPE column at pH 5.0 with a flow rate of 1.0 mL min⁻¹. The sorbed metals were eluted with 1 M nitric acid in acetone solution at a flow rate of 0.6 mL min⁻¹ and analyzed by flame atomic absorption spectrometry. The effects of sample volume, amount of APDC-AC, volume of eluent and ionic strength of working solution on metal ion recovery have been investigated. The present methodology gave recoveries from 90 to 106% and R.S.D. from 0.6 to 5.5%.     

Influence of tartrate ions on the coprecipitation of some trace metal inner complex compounds with bis(8-quinolyl)disulphide

The coprecipitation of Fe(III) quinoline-8-thiolate (QT) with bis (8-quinolyl) disulphide has been investigated with 1 mol × dm^–3 potassium tartrate and 0.001 mol × dm^–3 aqueous tartaric acid solutions in dependence on their pH. In return QTs of Cu(II), Cd(II) and Hg(II) have been coprecipitated from 0.2, 0.1, 0.01 and 0.001 mol × dm^–3 aqueous solutions of tartaric acid after adjusting the pH to 6–7. These tartaric acid concentrations relate to their initial concentrations before the coprecipitation. The presence of tartrate ions influences the recovery of the coprecipitated Fe(III), Cd(II) and Hg(II) QTs. A complete coprecipitation of the Cu(II) inner complex compound can be achieved from the aqueous solutions indicated.     

Hg(II)-imprinted thiol-functionalized mesoporous sorbent micro-column preconcentration of trace mercury and determination by inductively coupled plasma optical emission spectrometry

Hg(II)-imprinting thiol-functionalized mesoporous sorbent was prepared by a sol–gel method and characterized by X-ray diffraction (XRD), FT-IR spectroscopy and nitrogen gas adsorption–desorption. The static adsorption capacity of the Hg(II)-imprinted and non-imprinted sorbent was 78.5 and 26.6 mg g⁻¹, respectively. The breakthrough capacity was 4.46 mg g⁻¹, and the relative selectivity coefficient for Hg(II) in the presence of Cd and Pb was 3.3 and 3.9, respectively. A new method using a micro-column packed with Hg(II)-imprinting thiol-functionalized mesoporous sorbent has been developed for preconcentration of trace mercury prior to its determination by inductively coupled plasma optical emission spectrometry (ICP-OES). The effects of pH, sample flow rate and volume, elution solution and interfering ions on the recovery of the analyte have been investigated. The limit of detection was 0.39 ng ml⁻¹ with a concentration factor of 150 times. The developed method has been applied to the determination of trace mercury in some biological and environmental samples with satisfactory results. The accuracy was assessed through recovery experiments and analysis of certified reference material.     

微晶酚酞富集-分光光度法测定痕量Zn(II)

建立了一种利用修饰有结晶紫(CV^＋)的微晶酚酞作为固态吸附剂分离富集溶液中痕量Zn(II)的新方法, 富集后的Zn(II)含量可直接用光度法测定. 控制一定条件, Zn(II)能与常见阳离子Ni(II), Cd(II), Al(III), Ca(II), Mg(II), Co(II), Mn(II), Cu(II), Pb(II), Fe(III)等完全分离, 且富集时基本不受, , Br^－, Cl^－, I^－,等阴离子影响. 微晶酚酞对Zn(II)的吸附容量为25.8 mg/g; 富集因数可达200倍, 回收率在97.7%～102%之间, RSD小于2.7%. 该方法已成功应用于实际水样中Zn(II)的富集测定, 结果令人满意.     

Behaviour of palladium(II), platinum(IV), and rhodium(III) in artificial and natural waters: influence of reactor surface and geochemistry on metal recovery

The recovery of dissolved platinum group elements (PGE: Pd(II), Pt(IV) and Rh(III)) added to Milli-Q^® water, artificial freshwater and seawater and filtered natural waters has been studied, as a function of pH and PGE concentration, in containers of varying synthetic composition. The least adsorptive and/or precipitative loss was obtained for borosilicate glass under most of the conditions employed, whereas the greatest loss was obtained for low-density polyethylene. Of the polymeric materials tested, the adsorptive and/or precipitative loss of PGE was lowest for fluorinated ethylene propylene (Teflon^®). The loss of Pd(II) in freshwater was significant due to its affinity for surface adsorption and its relatively low solubility. The presence of natural dissolved organic matter increases the recovery of Pd(II) but enhances the loss of Pt(IV). The loss of Rh(III) in seawater was significant and was mainly due to precipitation, whereas Pd(II) recovery was enhanced, compared to freshwater, because of its complexation with chloride. The results have important implications regarding protocols employed for sample preservation and controlled laboratory experiments used in the study of the speciation and biogeochemical behaviour of PGE.     

Kinetic and Thermodynamic Investigations of Zn(II) Adsorption on Microcrystalline Anthracene Modified with 8‐Hydroxyquinoline and Its Application to the Preconcentration and Determination of Trace Zinc

A new method that utilizes microcrystalline anthracene modified with 8‐hydroxyquinoline as an adsorbent has been developed for the preconcentration of trace Zinc(II). The possible reaction mechanism is discussed in detail. The influences of different parameters, such as acidity, other metal ions, the amounts of 8‐hydroxyquinoline and anthracene, etc. on the enrichment yield of Zn(II) have been studied to optimize the experimental conditions. The experimental data were fitted well with the pseudo‐second‐order kinetic model and Langmuir model at all studied temperatures and the maximum adsorption capacity was 32.58 mg·g^?1 (300 K). The thermodynamic parameters (ΔG^θ, ΔH^θ and ΔS^θ) showed the feasibility, exothermic and spontaneous nature of the adsorption at 280～320 K. Experiments indicate that Zn(II) can be completely separated from Cu(II), Co(II), Cd(II), Mn(II), Ni(II) in the eluent. The recovery of this method is in the range of 96.0%～105.0% with preconcentration factor of 100 and the limit of detection after preconcentration is 0.068 μg·L^?1. The proposed method has been successfully applied to the determination of trace Zn(II) in effluents and synthetic water sample having a composition similar to certified water sample SLRS‐4 (NRC, Canada). Analytical results obtained by this recommended method were very satisfactory.     

Application of chelate forming resin Amberlite XAD-2-o-vanillinthiosemicarbazone to the separation and preconcentration of copper(II), zinc(II) and lead(II)

A very stable chelating resin matrix was synthesized by covalently linking o-vanillinthiosemicarbazone (oVTSC) with the benzene ring of the polystyrene-divinylbenzene resin Amberlite XAD-2 through a -NN- group. The resin was used successfully for the separation and preconcentration of copper(II), zinc(II) and lead(II) prior to their determination by atomic absorption spectrophotometry. The total sorption capacity of the resin was 850, 1500 and 2000 mug g(-1) of the resin for Cu(II), Zn(II) and Pb(II), respectively. For the quantitative sorption and recovery of Cu(II), Zn(II) and Pb(II), the optimum pH and eluants were pH 2.5-4.0 and 4 M HCl or 2 M HNO(3) for Cu(II), pH 5.5-6.5 and 1.0-2.0 M HCl for Zn(II) and pH 6.0-7.5 and 3 M HCl or 1 M HNO(3) for Pb(II). Both, the uptake and stripping of these metal ions were fairly rapid, indicating a better accessibility of the chelating sites. The t (1 2 ) values for Cu(II), Zn(II) and Pb(II) were also determined. Limit of tolerance of some electrolytes like NaCl, NaF, NaNO(3), Na(2)SO(4) and Na(3)PO(4) have been reported. The preconcentration factor for Cu(II), Zn(II) and Pb(II) was 90, 140 and 100 respectively. The method was applied for the determination of Cu(II), Zn(II) and Pb(II) in the water samples collected from Sabarmati river, Ahmedabad, India.     

Facilitated Cd(II) transport across CTA polymer inclusion membrane using anion (Aliquat 336) and cation (D2EHPA) metal carriers

PIMs have been involved as affinity membranes for recovery of metals (Cd, Pb, Zn) by facilitated transport from aqueous solutions under different speciation forms, either anionic or cationic. The motivation of this work is to compare the efficiency of the recovery process in the case of Cd(II) using extractants such as D2EHPA and Aliquat 336 that can form complexes with the cation Cd²⁺ or the anions CdCl₃⁻ and CdCl₄²⁻, respectively. The maximal Cd(II) recovery factors obtained in 8 h are 97.5% and 91.8% with D2EHPA and Aliquat 336, respectively. Although the transport fluxes with both carriers are not strongly different (ca. 2 μmol m⁻² s⁻¹), the recovery process in case of mixture of metals is better achieved with Aliquat 336. PIMs have shown a very good stability and a constancy of the transmembrane transport flux over 12 replicate measurements, each one lasting for 8 h repeated every 24 h.     

Sorption of palladium(II), rhodium(III), and platinum(IV) on Fe(3)O(4) nanoparticles

The adsorption of palladium(II), rhodium(III), and platinum(IV) from diluted hydrochloric acid solutions onto Fe(3)O(4) nanoparticles has been investigated. The parameters studied include the contact time and the concentrations of metals and other solutes such as H(+) and chloride. The equilibrium time was reached in less than 20 min for all metals. The maximum loading capacity of Fe(3)O(4) nanoparticles for Pd(II), Rh(III), and Pt(IV) was determined to be 0.103, 0.149, and 0.068 mmol g(-1), respectively. A sorption mechanism for Pd(II), Rh(III), and Pt(IV) has been proposed and their conditional adsorption equilibrium constants have been determined to be logK=1.72, 1.69, and 1.84, respectively. Different compositions of eluting solution were tested for the recovery of Pt(IV), Pd(II), and Rh(III) from Fe(3)O(4) nanoparticles. It was found that 0.5 mol L(-1) HNO(3) can elute all of the metal ions simultaneously, while 1 mol L(-1) NaHSO(3) was an effective eluting solution for Rh(III), and 0.5 mol L(-1) NaClO(4) for Pt(IV). In competitive adsorption, the nanoparticles showed stronger affinity for Rh(III) than for Pd(II) and Pt(IV).     

Dynamic adsorption and desorption of heavy metal ions on poly(acrylaminophosphonic-carboxyl-hydrazide) chelating fiber

The dynamic adsorption and desorption properties, including the effect of pH value and flow rate on the adsorption, eluent acidity and volume, eluting velocity and re-use, of Cu(II), Pb(II), Zn(II), Cd(II), Mn(II), Ni(II), Co(II) and Hg(II) ions on the column loaded with poly(acrylaminophosphonic-carboxyl-hydrazide) chelating fiber were investigated. The recovery of Mn(II), Co(II), Cd(II), Ni(II) and Zn(II) ions in the presence of Na, K, Ca and Mg ions was examined. The preconcentration of trace amounts of Mn(II), Co(II), Cd(II), Ni(II) and Zn(II) ions from model solution samples was carried out with satisfactory results. The amount of the metal ions detected after preconcentration and recovery by this technique was basically in agreement with the added amount. The method is rapid, precise and simple. Received: 15 October 1997 / Revised: 17 March 1998 / Accepted: 20 March 1998     

Liquid-liquid extraction and recovery of indium using Cyanex 923

The extraction of In(III) from HCl, H₂SO₄, and HNO₃ media using a 0.20 mol l⁻¹ Cyanex 923 solution in toluene is investigated. In(III) is quantitatively extracted over a fairly wide range of HCl molarity while from H₂SO₄ and HNO₃ media the extraction is quantitative at low acid concentration. The extracted metal ion has been recovered by stripping with 1.0 mol l⁻¹ H₂SO₄. The stoichiometry of the In(III): Cyanex 923 complex is observed to be 1:2. The extraction of In(III) is insignificantly changed in diluents namely toluene, n-hexane, kerosene (160-200 °C), cyclohexane, and xylene having more or less the same dielectric constants, whereas, it decreases with increasing polarity of diluents such as cyclohexanone and chloroform. The extractant is stable towards prolonged acid contact and there is a negligible loss in its extraction efficiency even after recycling for 20 times. The extraction behavior of some commonly associated metal ions namely V(IV), Ti(IV), Al(III), Cr(III), Fe(III), Ga(III), Sb(III), Tl(III), Mn(II), Fe(II), Cu(II), Zn(II), Cd(II), Pb(II), and Tl(I) has also been investigated. Based on the partition data the conditions have been identified for attaining some binary separations of In(III). These conditions are extended for the recovery of pure indium from zinc blend, zinc plating mud, and galena. The recovery of the metal ions is around 95% with purity approximately 99%.     

Dynamic adsorption and desorption of heavy metal ions on poly(acrylaminophosphonic-carboxyl-hydrazide) chelating fiber

The dynamic adsorption and desorption properties, including the effect of pH value and flow rate on the adsorption, eluent acidity and volume, eluting velocity and re-use, of Cu(II), Pb(II), Zn(II), Cd(II), Mn(II), Ni(II), Co(II) and Hg(II) ions on the column loaded with poly(acrylaminophosphonic-carboxyl-hydrazide) chelating fiber were investigated. The recovery of Mn(II), Co(II), Cd(II), Ni(II) and Zn(II) ions in the presence of Na, K, Ca and Mg ions was examined. The preconcentration of trace amounts of Mn(II), Co(II), Cd(II), Ni(II) and Zn(II) ions from model solution samples was carried out with satisfactory results. The amount of the metal ions detected after preconcentration and recovery by this technique was basically in agreement with the added amount. The method is rapid, precise and simple. Received: 15 October 1997 / Revised: 17 March 1998 / Accepted: 20 March 1998     

Separation and Recovery of Some Metal Ions Using Pan Sorbed Zinc Silicate as Chelating Ion Exchanger

Abstract

A new inorganic ion exchanger zinc silicate has been synthesized. Its properties such as ion exchange capacity, heat effect and stability etc. have been studied. Sorption of PAN over zinc silicate formed a chelate ion exchanger which showed greater selectivity for some metal ions especially for Cu²⁺, Ni²⁺, Co²⁺, Fe³⁺, Ag⁺, Ag³⁺ and Pt⁴⁺. Selectivity has been determined on the basis of distribution coefficients of these metal ions. Separations of Pt(IV) from Fe(III), Au(III) from Fe(III), Ag(I) from Cu(II) and Au(III) from Cu(II) have been reported. The recovery of Pt(IV) and Au(III) from dilute solutions has also been studied.     

Extraction of Copper from Sulfate Solutions with Hydrazides of Versatic Higher Acids in the Presence of Accompanying Metals

Fundamental aspects of the extractive recovery of copper(II) in the presence of accompanying metals from sulfuric acid solutions with hydrazides of Versatic (GVIK 509) α-branched tertiary carboxylic acids in kerosene or its mixture with modifying agents: 2-ethylhexanol or alkylphenol. The selective extraction of copper(II) in the presence of nickel(II), cobalt(II), zinc(II), and iron(III) with hydrazides in kerosene is possible at pH 0.1–0.6. The separation coefficients of element pairs were calculated. It was found that the modifiers have no effect on the quantitative extraction of copper(II), but strongly change the extraction pattern of the metals under study. It was shown that the re-extraction of copper(II) with sulfuric acid solutions is in principle possible.