ZrO<Subscript>2</Subscript> and Cu/ZrO<Subscript>2</Subscript> Sol–Gel Materials Spectroscopic Characterization

Copper-doped zirconia (1% mol) and zirconia powders were prepared by the sol–gel process, using zirconium n-butoxide and copper nitrate as precursors. The resulting xerogels are nanocrystalline and exhibit different properties from the corresponding microcrystalline materials. The copper nitrate salt was dissolved and co-gelled in situ at the initial stage of the reaction. The properties of the resulting materials were studied by XRD, FTIR and UV-Vis. The as-prepared samples were amorphous and crystallized to the tetragonal zirconia phase at 400 °C. At temperatures higher than 600 °C, the monoclinic phase was also obtained. No evidence of discrete crystalline copper compounds was observed, consistent with good dispersion of the dopant. Several bands were observed by FTIR in the 4400–3000 cm^–1 region, which diminishes in intensity and shifted to higher wavenumbers with heating. The bandgap energy (E_g) was strongly modulated by the presence of the dopant and heating temperature, with increasing temperature leading to a corresponding decrease in E_g.     

Preparation of SiO<Subscript>2</Subscript>–ZrO<Subscript>2</Subscript> xerogel and its application for the removal of organic dye

SiO₂–ZrO₂ xerogel was prepared via a sol–gel method followed by ambient pressure drying. The xerogel was characterized by X-ray diffraction, thermal analysis, fourier transform infrared spectroscopy, scanning electron microscopy, and nitrogen adsorption/desorption analysis. The results showed that the SiO₂–ZrO₂ xerogel was amorphous and possessed a three-dimensional network structure with a narrow distribution of pore size. Its specific surface area reached up to 525.6?m²/g after 600?°C heat treatment, with a pore volume of 1.16?cm³/g and an average pore size of 8.5?nm. In order to explore the potential application of the SiO₂–ZrO₂ xerogel for the removal of organic dyes, its adsorption capacity was studied by removal of Rhodamine B (RhB) from aqueous solution through batch experiments. The results showed that the adsorption process of RhB onto SiO₂–ZrO₂ xerogel was slightly promoted under acidic conditions and significantly inhibited under strong alkaline conditions. And adsorption equilibrium can be achieved in 30?min. The kinetic data of the adsorption were analyzed using pseudo-first-order and pseudo-second-order models. The results indicated that the pseudo-second-order model described the adsorption mechanism better. The sorption behavior was evaluated by Langmuir and Freundlich isotherm models. The results suggested that the Langmuir model could accurately describe the experimental data and the adsorption capacity q_max was 177.7?mg/g. Thermodynamic analysis revealed that the adsorption of RhB onto the SiO₂–ZrO₂ xerogel was both spontaneous and exothermic in nature. Thus, the as-prepared SiO₂–ZrO₂ xerogel might be used as an adsorbent for wastewater treatment, especially for the removal of dyes.

Open image in new window

     

Effect of ZrO<Subscript>2</Subscript> on Catalyst Structure and Catalytic Sulfur-Resistant Methanation Performance of MoO<Subscript>3</Subscript>/ZrO<Subscript>2</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript> Catalysts

A series of MoO₃/ZrO₂–Al₂O₃ catalysts was prepared and investigated in the sulfur-resistant methanation aimed at production of synthetic natural gas. Different methods including impregnation, deposition precipitation, and co-precipitation were used for preparing ZrO₂–Al₂O₃ composite supports. These composite supports and their corresponding Mo-based catalysts were investigated in the sulfur-resistant methanation, and characterized by N₂ adsorption–desorption, XRD and H₂-TPR. The results indicated that adding ZrO₂ promoted MoO3dispersion and decreased the interaction between Mo species and support in the MoO₃/ZrO₂–Al₂O₃ catalysts. The co-precipitation method was favorable for obtaining smaller ZrO₂ particle size and improving textural properties of support, such as better MoO₃ dispersion and increased concentration of Mo⁶⁺ species in octahedral coordination to oxygen. It was found that the MoO₃/ZrO₂–Al₂O₃ catalyst with ZrO₂Al₂O₃ composite support prepared by co-precipitation method exhibited the best catalytic activity. The ZrO₂ content in the ZrO₂Al₂O₃ composite support was further optimized. The MoO₃/ZrO₂–Al₂O₃ with 15 wt % ZrO₂ loading exhibited the highest sulfur-resistant CO methanation activity, and excess ZrO₂ reduced the specific surface area and enhanced the interaction between Mo species and support. The N₂ adsorption-desorption results indicated that the presence of ZrO₂ in excessive amounts decreased the specific surface area since some amounts of ZrO₂ form aggregates on the surface of the support. The XRD and H₂-TPR results showed that with the increasing ZrO₂ content, ZrO₂ particle size increased. These led to the formation of coordinated tetrahedrally Mo⁶⁺(T) species and crystalline MoO₃, and this development was unfavorable for improving the sulfur-resistant methanation performance of MoO₃/ZrO₂–Al₂O₃ catalyst.     

Low temperature synthesis of Co<Subscript>2</Subscript>SiO<Subscript>4</Subscript>/SiO<Subscript>2</Subscript> nanocomposite using a modified sol–gel method

The paper presents a study on the preparation of Co₂SiO₄/SiO₂ nanocomposites by a new modified sol–gel method. We have prepared gels starting from tetraethylorthosilicate (Si(OC₂H₅)₄), cobalt nitrate Co(NO₃)₂·6H₂O and some diols: ethylene glycol (C₂H₆O₂), 1,2propanediol (C₃H₈O₂) and 1,3propanediol (C₃H₈O₂), for a final composition: 30% CoO/70% SiO₂. During the heating of the gels at 140 °C, a redox reaction takes place between NO₃ ⁻ ions and diol with formation of some carboxylate anions. These carboxylate anions react with the Co(II) ions to form coordination compounds embedded in silica matrix, as evidenced by FT-IR spectrometry and thermal analysis. These Co(II) coordinative compounds thermally decompose in the range 250–300 °C to the corresponding oxides: CoO and/or Co₃O₄ inside the matrices pores. When CoO results, it reacts with SiO₂ at low temperature leading to Co₂SiO₄, which crystallizes at 700 °C. XRD patterns of the samples annealed at temperatures lower than 700 °C were characteristic to amorphous phases. The samples annealed at temperatures ≥700 °C, contain Co₂SiO₄ (olivine) as unique crystalline phase inside the amorphous silica matrix, according to XRD patterns. As evidenced by TEM images, Co₂SiO₄ nanoparticles are homogenously dispersed inside the silica matrix.     

Sol–Gel Derived Rh/TiO<Subscript>2</Subscript>/SiO<Subscript>2</Subscript> Nanocomposite Membranes

A porous borosilicate substrate has been coated with base catalysed SiO₂ sol–gel nanoparticles. Onto these were deposited the vapour of titanium isopropoxide, where it reacted with the surface OH groups to give a TiO₂-overcoat. This nanocomposite sol–gel derived TiO₂/SiO₂ membrane was then doped with 1%Rh giving Rh/TiO₂/SiO₂ membranes. These are shown to be coherent and crack-free, to have good permeability and activity in the isomerisation of butanes. It appears that sol–gel chemistry will allow such membranes to be totally engineered at a nm level.     

Phosphorus modified MoO<Subscript>3</Subscript>–Bi<Subscript>2</Subscript>SiO<Subscript>5</Subscript>/SiO<Subscript>2</Subscript> catalyst for gas-phase epoxidation of propylene by molecular oxygen

The phosphorus (P) modified MoO₃–Bi₂SiO₅/SiO₂ catalyst was prepared by a simple co-impregnation method and investigated in the epoxidation of propylene by molecular oxygen. The catalyst was characterized by X-ray diffraction (XRD), N₂ adsorption–desorption analysis, NH₃-temperature-programmed desorption (NH₃-TPD), transmission electron microscopy, and Raman spectroscopy. It was found that the P-modified MoO₃–Bi₂SiO₅/SiO₂ catalyst with a P/Mo molar ratio of 0.5 exhibits the best catalytic performance for epoxidation of propylene by O₂, the TOFs for propylene oxide (PO) formation was four times higher than that of the unmodified one at 633 K. The modification by P could promote the dispersion of MoO₃ nanoparticles and increase the number of weak and moderate acid sites with respect to the phosphorus-free MoO₃–Bi₂SiO₅/SiO₂ catalyst, which were beneficial to the formation of PO. Moreover, the introduction of P also could protect the mesoporous structure by inhibiting the formation of Bi₂Mo₃O₁₂, which was beneficial to the dispersion of active species. We suppose that the phosphorus, bismuth and molybdenum species of P-modified MoO₃–Bi₂SiO₅/SiO₂ catalyst play important roles for propylene epoxidation by molecular oxygen.     

Synthesis and photocatalytic activity of mesoporous SiO<Subscript>2</Subscript>–TiO<Subscript>2</Subscript>

Mesoporous SiO₂–TiO₂ was synthesized by the sol–gel method using Si(OC₂H₅)₄, Ti(OC₂H₅)₄, and stearyltrimethylammonium chloride. By using acetylacetone as the capping agent of Ti(OC₂H₅)₄, homogeneous SiO₂–TiO₂ composite was obtained. Spherical mesoporous SiO₂–TiO₂ was also synthesized by the sol–gel method using W/O emulsion under microwave irradiation. The specific surface area of these mesoporous SiO₂–TiO₂ materials decreased when the Ti/Si molar ratio was higher than 0.1, which indicated that Ti was homogeneously distributed in mesoporous SiO₂ matrix at Ti/Si ≦ 0.1. The photocatalytic activity of mesoporous SiO₂–TiO₂ materials was investigated by the degradation of methylene-blue in water under UV light irradiation. Mesoporous SiO₂–TiO₂ was effective for the adsorption–decomposition of methylene-blue.     

Modifying additives affect the properties of Y<Subscript>2</Subscript>O<Subscript>3</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript>–SiO<Subscript>2</Subscript> system

The effects caused by modifying additives, namely nonionic surfactants (Tween 80 and Neonol AF 9-6) and oxides (B₂O₃ and HfO₂), on the rheology, film formation, and phase formation in the yttrium aluminum silicate system prepared by sol–gel technology were studied. The effect of 1 wt % HfO₂ additions on the activation energy of crystallization was studied.     

Formation of nanocrystals in the ZrO<Subscript>2</Subscript>–H<Subscript>2</Subscript>O system

Formation of zirconia nanocrystals in the course of thermal treatment of an X-ray amorphous zirconium oxyhydroxide was studied. It was shown that the formation of tetragonal and monoclinic polymorphs of ZrO₂ in the temperature range from 500 to 700°C occurs owing to dehydration and crystallization of amorphous hydroxide. An increase of the temperature up to 800°C and higher activates mass transfer processes and, as a result, activates the nanoparticle growth and increases the fraction of the phase based on monoclinic modification of ZrO₂ due to mass transfer from the nanoparticles with the non-equilibrium tetragonal structure. Herewith, formed ZrO₂ nanocrystals with monoclinic structure have a broad size distribution of crystallites, and the average crystallite size after thermal treatment at 1200°C for 20 min is about 42 nm.     

Structure and thermal properties of the fritted glazes in SiO<Subscript>2</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript>–CaO–MgO–Na<Subscript>2</Subscript>O–K<Subscript>2</Subscript>O–ZnO system

In this work, the structure and thermal properties of aluminosilicate fritted glazes in SiO₂–Al₂O₃–CaO–MgO–Na₂O–K₂O–ZnO system with (4.0 mol%) and without addition of ZnO were examined by GIXRD, FTIR, MAS-NMR and thermal methods (DTA, DIL). It has been found that the all experimental glazes are amorphous material (transparent glazes). On the base of spectroscopic investigations, it was found that zinc ions exist in the network glazes in the octahedral coordination—Zn²⁺ ions play a network modifier role in structure of glazes. An analysis of the data obtained from thermal tests showed that addition of ZnO into chemical composition results in decrease in glass transition temperature value (T _g) for all glazes (DTA, DIL). The coefficient of thermal expansion (α) is decreased as the whole measurement range for one series of fritted glazes.     

CeO<Subscript>2</Subscript>–ZrO<Subscript>2</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript> Modified by Selective Doping with SrO for Improved Pd-Only Three-Way Catalyst

Composite CeO₂–ZrO₂–Al₂O₃ (CZA) modified by selective doping with SrO was prepared by simple coprecipitation method. The characterization results reveal that the structural property of the modified sample is fundamentally different from that of undoped CZA, the doped SrO can selectively combine with Al₂O₃ and act as a stabilizer, meanwhile homogeneous CZ solid solution is formed which appears insusceptible to Al₂O₃. Consequently more lattice defects are created in CZAS, which facilitate the improvement of oxygen mobility. The UV–Vis DRS and XPS results demonstrate that after doping with SrO, the supported catalyst Pd/CZAS possesses higher surface Pd and Ce³⁺ concentrations, which consequently leads to improved reducibility and catalytic performance. Furthermore, the synergistic effect between CeO₂–ZrO₂ and SrO–Al₂O₃ helps improve the thermal stability of Pd/CZAS. As a result, after aging treatment, Pd/CZASa still maintains improved structural, textural, morphological and reduction properties along with enhanced three-way catalytic performance.     

Thermal characterisation of raw aluminosilicate glazes in SiO<Subscript>2</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript>–CaO–K<Subscript>2</Subscript>O–Na<Subscript>2</Subscript>O–ZnO system with variable content of ZnO

Thermal properties of raw aluminosilicate ceramic glazes in the multicomponent system of SiO₂–Al₂O₃–CaO–K₂O–Na₂O–ZnO modified by ZnO addition were studied by differential thermal analysis (DTA), dilatometry (DIL), hot-stage microscopy (HSM), X-ray diffraction and fourier transform infrared spectroscopy (FTIR). Using the method of differential thermal analysis, the ways in which zinc oxides affect the temperature of transition (T _g), crystallisation (T _c) were determined. An analysis of the DTA data obtained during thermal tests showed that an increase in ZnO content results in decreasing the T _g value. Also, the influence of ZnO on characteristic temperatures and viscosity of glazes was checked. The introduction of zinc oxide (ZnO) into the glaze composition contributes to the decrease in viscosity of such glazes. An increasing ZnO content in the glazes also causes the reduction in softening (T _s), half-sphere (T _half-sphere) and fusion (T _fusion) temperatures. The mid-infrared spectroscopy showed that the thermal properties of glazes in SiO₂–Al₂O₃–CaO–K₂O–Na₂O–ZnO system modified by addition of ZnO can be associated with the depolymerising influence of zinc ions on the structure of the tested glazes.     

Distribution of niobium and lanthanum between two immiscible melts in the system LaPO<Subscript>4</Subscript>–SiO<Subscript>2</Subscript>–NaF–Nb<Subscript>2</Subscript>O<Subscript>5</Subscript>–Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>

The system LaPO₄–SiO₂–NaF–Nb₂O₅–Fe₂O₃ is characterized by immiscibility fields in the liquid state region. Addition of iron expands fields of immiscibility of melts and decreases the temperature of their coexistence. A fraction of 87–90% of niobium is extracted into iron silicate melt, and 92–98% of lanthanum is extracted into phosphate salt melt.     

Mass attenuation coefficients of B<Subscript>2</Subscript>O<Subscript>3</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript>–SiO<Subscript>2</Subscript>–CaF<Subscript>2</Subscript> glass system at 0.662 and 1.25 MeV gamma energies

The total mass attenuation coefficients, partial interaction and the effective atomic numbers (Z_eff) of glass system (80−x)B₂O₃–10Al₂O₃–10SiO₂–xCaF₂ (where x = 5, 10, 20, 25, 30, 35 and 40 mol %) have been calculated at photon energies 0.662 and 1.25 MeV using the WinXCom software on the basis of mixture rule. Results indicated that the total mass attenuation coefficients showed a decrease with increasing the CaF₂ concentration, due to a decrease in Compton scattering probability, which gave a dominant contribution to the total mass attenuation coefficients for the studied glass samples at both energies. However, the photoelectric absorption and coherent scattering showed an increase with increasing the CaF₂, concentrations at same energies. For a comparison, the total mass attenuation coefficients of the glass system had lower values at the energy 1.25 MeV than that at 0.662 MeV. Z_eff was found to increase linearly with the increase of CaF₂ concentrations. It was concluded that low CaF₂ concentrations in glass system, under study, have Z_eff close to that of human tissue and have higher total absorption coefficients at energy of 0.662 MeV than that at 1.25 MeV. These results are very useful in designing gamma radiation detectors using thermoluminescence technique. Therefore, it is recommended to use low CaF₂ concentration of our glass system as good gamma detectors at energy of 1.25 MeV.     

Coexistence of Immiscible Liquid Phases in the LaPO<Subscript>4</Subscript>–SiO<Subscript>2</Subscript>–NaF–Nb<Subscript>2</Subscript>O<Subscript>5</Subscript> System

It was determined that the system LaPO₄–SiO₂–NaF–Nb₂O₅ within the temperature range 850–1200°C has regions of immiscibility of liquid phases (silicate and phosphate–salt melts). The coexisting melts have contrast chemical and phase compositions and structural-textural features, because of which the methods for extracting rare-earth elements and niobium from these melts differ. The silicate melts form glass, whereas the phosphate–salt melts have high crystallization ability. The mutual solubility of the liquid phases does not exceed 5%. The components of the system are contrastively distributed between the silicate and phosphate–salt melts. A fraction of 95–97% of niobium is extracted into the silicate melt, and 93–95% of La and P is extracted into the phosphate–salt melt.     

Structural characterisation and thermo-physical properties of glasses in the Li<Subscript>2</Subscript>O–SiO<Subscript>2</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript>–K<Subscript>2</Subscript>O system

This article aims to shed some light on the structure and thermo-physical properties of lithium disilicate glasses in the system Li₂O–SiO₂–Al₂O₃–K₂O. A glass with nominal composition 23Li₂O–77SiO₂ (mol%) (labelled as L₂₃S₇₇) and glasses containing Al₂O₃ and K₂O with SiO₂/Li₂O molar ratios (3.13–4.88) were produced by conventional melt-quenching technique in bulk and frit forms. The glass-ceramics (GCs) were obtained from nucleation and crystallisation of monolithic bulk glasses as well as via sintering and crystallisation of glass powder compacts. The structure of glasses as investigated by magic angle spinning-nuclear magnetic resonance (MAS-NMR) depict the role of Al₂O₃ as glass network former with four-fold coordination, i.e., Al(IV) species while silicon exists predominantly as a mixture of Q ³ and Q ⁴ (Si) structural units. The qualitative as well as quantitative crystalline phase evolution in glasses was followed by differential thermal analysis (DTA), X-ray diffraction (XRD) adjoined with Rietveld-reference intensity ratio (R.I.R.) method, Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The possible correlation amongst structural features of glasses, phase composition and thermo-physical properties of GCs has been discussed.     

Effects of Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> on the crystallization and structure of CaO–Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>–SiO<Subscript>2</Subscript> glass ceramics

Radiation-induced degradation of the weakly and strongly 4-vinylpyridine basic ion exchange resins by gamma radiolysis was investigated in the presence of air and liquid water. This study is focused on evaluating the radiolytic gases (H₂, CO, CO₂ and CH₄) and liquid products (water-solute TOC and NH₄ ⁺). The weakly basic resin yielded lower amounts of H₂ and CO and higher amounts of CO₂ than those of the strongly basic resin. Moreover, the strong basic resin tended to yield greater amounts of NH₄ ⁺. Resins were characterized by the FTIR spectroscopy technique and the results showed that the resins structures are relatively stable.     

Physicochemical properties of TiO<Subscript>2</Subscript>–SiO<Subscript>2</Subscript> xerogel modified by hydrogen peroxide

How the specific surface area and the amorphous-to-crystalline titania phase ratio in TiO₂–SiO₂ (14 mol % TiO₂) xerogels change during the fivefold repeated cycles comprising the hydrogen peroxide treatment of the xerogel followed by drying and calcining of the binary material, was traced by the BET method, X-ray powder diffraction, and IR spectroscopy.     

Synthesis and properties of magnetic superhydrophobic mesoporous Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>–SiO<Subscript>2</Subscript> composites

Ways to obtain Fe₂O₃–SiO₂ iron-containing silica composites with organized mesoporous structure (MCM-41) and large specific surface area (up to 1476 m² g^–1) were considered. The influence exerted by the method used to synthesize the materials on their structure, texture characteristics, particle size, and magnetic properties were studied. The aggregative stability of samples was examined. It was shown that treatment of the resulting composites with compounds from the chlorosilane group affects their hydrophobic properties.     

Preparation and characterization of SiO<Subscript>2</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript>–Na<Subscript>2</Subscript>O glass coated cBN abrasive particles via sol–gel route

SiO₂–Al₂O₃–Na₂O glass coated cubic boron nitride (cBN) abrasive particles were prepared by sol–gel technique. The results indicated that SiO₂–Al₂O₃–Na₂O glass was excellent material for oxidation protection of cBN abrasive grains because coefficient of thermal expansion of this glass closely matched that of cBN materials. The single particle compressive strength and impact toughness of this glass coated cBN abrasive particles were significantly increased. For the application of glass coated cBN abrasives to vitrified grinding wheels, it was evident that the glass coating provided high bonding strength between cBN abrasive grains and vitrified bond system.