Mechanism and kinetics of processes occurring at TiO<Subscript>2</Subscript> cathode in CaCl<Subscript>2</Subscript>-CaO melt

Preparation of titanium by the electrochemical reduction of titanium dioxide in a CaCl₂-CaO melt in a diaphragm electrolyzer using a graphite anode was studied.     

Synthesis and characterization of a new hybrid TiO<Subscript>2</Subscript>/SiO<Subscript>2</Subscript> filler for lithium conducting gel electrolytes

This paper describes the synthesis and properties of a new type of ceramic fillers for composite polymer gel electrolytes. Hybrid TiO₂-SiO₂ ceramic powders have been obtained by co-precipitation from titanium(IV) sulfate solution using sodium silicate as the precipitating agent. The resulting submicron-size powders have been applied as fillers for composite polymer gel electrolytes for Li-ion batteries based on poly(vinylidene fluoride-co-hexafluoropropylene) (PVdF/HFP) copolymeric membranes. The powders, dry membranes and gel electrolytes have been examined structurally and electrochemically, showing favorable properties in terms of electrolyte uptake and electrochemical characteristics in Li-ion cells.     

PbO<Subscript>2</Subscript>-TiO<Subscript>2</Subscript> composites: Electrosynthesis and physicochemical properties

Fundamental aspects of electro deposition of PbO₂-based composites containing titanium dioxide particles were studied. The content of the dispersed phase in the composite depends on the electrolyte composition and deposition conditions. Incorporation of titanium dioxide particles into PbO₂ leads to significant changes in the morphology and structure of the deposit.     

Activity of Rh/TiO<Subscript>2</Subscript> catalysts in NaBH<Subscript>4</Subscript> hydrolysis: The effect of the interaction between RhCl<Subscript>3</Subscript> and the anatase surface during heat treatment

The reaction properties of Rh/TiO₂ sodium tetrahydroborate hydrolysis catalysts reduced directly in the reaction medium depend on the temperature at which they were calcined. Raising the calcination temperature to 300°C enhances the activity of the Rh/TiO₂ catalysts. Using diffuse reflectance electronic spectroscopy, photoacoustic IR spectroscopy, and chemical and thermal analyses, it is demonstrated that, as RhCl₃ is supported on TiO₂ (anatase), the active-component precursor interacts strongly with the support surface. The degree of this interaction increases as the calcination temperature is raised. TEM, EXAFS, and XANES data have demonstrated that the composition and structure of the rhodium complexes that form on the titanium dioxide surface during different heat treatments later determine the state of the supported rhodium particles forming in the sodium tetrahydroborate reaction medium.     

Investigation of synthesis and microstructure of bismuth titanates with TiO<Subscript>2</Subscript> rich compositions

Preliminary examinations regarding formation of bismuth titanates in a part of Bi₂O₃—TiO₂ system rich with TiO₂ have been carried out. Bismuth titanates have been synthesized from mixtures of Bi₂O₃ and TiO₂ (anatase) by the conventional solid-state method at the temperatures ranged from 1273 to 1473 K. Differential thermal analysis (DTA), powder X-ray diffraction (XRD) and scanning electron microscopy (SEM) have been used to study the formation of bismuth titanates. The following compounds have been achieved: Bi₄Ti₃O₁₂, Bi₂Ti₂O₇ and Bi₂Ti₄O₁₁. Existence of controversial bismuth titanate of formula Bi₂Ti₃O₉ in the Bi₂O₃—TiO₂ system has not been confirmed.     

Solid electrolytes with cesium-cationic conduction in the Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>-TiO<Subscript>2</Subscript>-Cs<Subscript>2</Subscript>O system

New cesium-conducting solid electrolytes based on cesium monoferrite in the Fe₂O₃-TiO₂-Cs₂O system are synthesized and studied. It is found that the introduction of titanium dioxide significantly reduces the electronic component of conductivity, which prevails in pure CsFeO₂, and raises the ionic conductivity. The latter becomes predominant with increasing concentration of TiO₂. The effect of dimensional factor on the characteristics of electrolyte is shown. The optimal compositions studied have very high cesium-cationic conductivity: it is above 10⁻² S cm ⁻¹ at 300°C.     

Effect of CeO<Subscript>2</Subscript> and Sb<Subscript>2</Subscript>O<Subscript>3</Subscript> on the phase transformation and optical properties of photostable titanium dioxide

In the present work, the effect of individual additives calculated as molar fractions of Sb₂O₃ and CeO₂ (x _{Sb 2}O₃ range: 0.03–0.08 %, x _{CeO 2} range: 0.05–0.14 %), on the phase composition, phase transformation, and optical properties of photostable rutile titanium dioxide was studied using selective leaching method, ICP-AES technique, XRD method, spectrophotometric analysis and S _BET measurements. The starting material was hydrated titanium dioxide. It was observed that the addition of Sb₂O₃ to TiO₂ did not influence the anatase-rutile phase transformation, but increasing the CeO₂ addition caused a decrease in the rutilization degree. Thus, CeO₂ acted as an inhibitor of the TiO₂ phase transformation. Sb₂O₃ addition to TiO₂ presumably caused the formation of a co-phase of Sb with Ti. Cerium formed a separate phase, CeO₂, and reacted partly with titanium, probably creating co-phase, Ce_0.8Ti_0.2O₂. Comparing the colour of modified rutile titanium dioxide according to the type of the additive introduced, it was found that TiO₂ with CeO₂ had higher brightness but lower white tone values when compared with TiO₂ modified with Sb₂O₃. The relative lightening power and grey tone of the modified TiO₂ were higher in TiO₂ modified with Sb₂O₃. The values of the photocatalytic activity measured in all TiO₂ samples modified either with Sb₂O₃ or CeO₂ were very similar and varied around the value of 21.     

TiO<Subscript>2</Subscript> nanofibers embedding single crystalline TiO<Subscript>2</Subscript> nanowires

Epitaxially grown titanium dioxide (TiO₂) nanofibers embedding single crystalline TiO₂ nanowires (NWs) were successfully fabricated by electropinning poly(vinyl pyrrolidone)/ethanol solutions mixed with hydrothermally synthesized TiO₂ NWs and titanium isopropoxide precursors and subsequently calcinating the electrospun nanofibers. Utilizing scanning electron microscopy (SEM) and transmission electron microscopy (TEM), the morphologies of TiO₂ NWs and nanofibers were investigated. High resolution TEM (HR-TEM) and selected area electron diffraction (SAED) allowed us to indentify the fact that, during the calcination process under the optimized condition, titanium isopropoxide precursors were epitaxially crystallized on the surface of single crystalline TiO₂ NWs. Based on the X-ray diffraction (XRD) experiments, it was also realized that the crystalline structure of hydrothermally synthesized TiO₂ NWs and epitaxially crystallized TiO₂ nanofibers is anatase and that TiO₂ composite nanofibers embedding TiO₂ NWs exhibited a higher crystallinity than the pristine TiO₂ nanofibers. Additionally, ultraviolet visible (UV–Vis) spectra of nanofibers indicated that optical properties of TiO₂ nanofibers can be tuned by introducing the single crystalline TiO₂ NWs.     

Hydrothermal synthesis of one-dimensional (1D) Na<Subscript>x</Subscript>TiO<Subscript>2</Subscript> nanostructures

Nanorods of sodium titanium dioxide bronze Na_xTiO₂ were synthesized by the hydrothermal treatment of the amorphous TiO₂·nH₂O gel with 10 M NaOH followed by ultrasonication in 0.1 M HCl and thermal treatment (500°C, 10 h). The thermal treatment of the nanorods does not change the morphology of the particles. According to the electron diffraction data, the Na_xTiO₂ nanorods grow along the c axis.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 71–73, January, 2005.     

Electrodeposition of thin Cu<Subscript>2</Subscript>ZnSnS<Subscript>4</Subscript> films

The electrochemical behavior of copper(II), zinc(II), and thiosulfate (S₂O₃ ^2-) ions on the molybdenum electrode in individual 0.2 М sodium sulfate solutions (рН 6.7) and with addition of either 0.1 М tartaric acid (рН 4.6) or 0.1 М citric acid (рН 4.7) is studied. A one-step electrochemical method is developed for the deposition of thin Cu₂ZnSnS₄ films, which is carried out on the molybdenum electrode at a constant potential in sodium sulfate solutions containing tartaric acid. The effect of the concentration of electrolyte components on the chemical composition of Cu₂ZnSnS₄ films is determined. The phase composition is confirmed by the Raman spectroscopy data. The surface morphology of synthesized films is studied by means of scanning-electron and atomic-force microscopes. The photoelectrochemical characteristics of Cu₂ZnSnS₄ films are determined. Samples of these coatings on the Mo electrode are found to be highly photosensitive.     

Complexation of TiF<Subscript>4</Subscript> with PhP(O)[CH<Subscript>2</Subscript>C(O)NMe<Subscript>2</Subscript>]<Subscript>2</Subscript> in CH<Subscript>2</Subscript>Cl<Subscript>2</Subscript>: Appearance of a Chiral Center at Chelate Coordination

The reaction of TiF₄ with PhP(O)[CH₂C(O)NMe₂]₂ in CH₂Cl₂ has been studied by ¹⁹F NMR spectroscopy. It has been found that the major reaction products are chelate tetrafluoro complex (η²-L)TiF₄ where the ligand is coordinated to the titanium ion through the P=O and C=O groups and cis-TiF₄(ОР···L)₂ where both ligands are coordinated to the central ion through the more basic P=O groups. Spectral features of the tetrafluoro chelate have been studied, which have been attributed for the first time to the appearance of a chiral center at chelate coordination. The character of manifestation of conformational isomerism of the chelate ring and chiral center in the chelating ligand in mixed octahedral complexes of d⁰ transition metal fluorides in ¹⁹F NMR spectra is discussed.     

Influence of ZrO<Subscript>5</Subscript> treatment temperature on the interaction with titanium tetrachloride

The data on phase and chemical transformations of nanosized zirconium dioxide upon annealing at 25–1300°С are presented. The in situ interaction of titanium tetrachloride with nanosized zirconia annealed at 200–800°С has been studied. The revealed regularities of the change of titanium content and the Cl/Ti ratio in the chemisorbed groups have confirmed that TiCl₄ predominantly reacts with zirconia treated at up to 400°С via the hydroxyl groups to yield the TiCl_4–n fragments. In the case of zirconia treated at higher temperature, the interaction with TiCl₄ involves the coordination-unsaturated Zr⁺ and Zr–O^– centers as well.     

Layered LiNi<Subscript>0.80</Subscript>Co<Subscript>0.15</Subscript>Al<Subscript>0.05</Subscript>O<Subscript>2</Subscript> as cathode material for hybrid Li<Superscript>+</Superscript>/Na<Superscript>+</Superscript> batteries

LiNi_0.80Co_0.15Al_0.05O₂ (NCA) is explored to be applied in a hybrid Li⁺/Na⁺ battery for the first time. The cell is constructed with NCA as the positive electrode, sodium metal as the negative electrode, and 1 M NaClO₄ solution as the electrolyte. It is found that during electrochemical cycling both Na⁺ and Li⁺ ions are reversibly intercalated into/de-intercalated from NCA crystal lattice. The detailed electrochemical process is systematically investigated by inductively coupled plasma-optical emission spectrometry, ex situ X-ray diffraction, scanning electron microscopy, cyclic voltammetry, galvanostatic cycling, and electrochemical impedance spectroscopy. The NCA cathode can deliver initially a high capacity up to 174 mAh g^?1 and 95% coulombic efficiency under 0.1 C (1 C?=?120 mA g^?1) current rate between 1.5–4.1 V. It also shows excellent rate capability that reaches 92 mAh g^?1 at 10 C. Furthermore, this hybrid battery displays superior long-term cycle life with a capacity retention of 81% after 300 cycles in the voltage range from 2.0 to 4.0 V, offering a promising application in energy storage.     

Electroactive Polymerization Behaviors of Fused-Pentagon Chlorofullerenes: <Superscript>#1809</Superscript>C<Subscript>60</Subscript>Cl<Subscript>8</Subscript> and <Superscript>#271</Superscript>C<Subscript>50</Subscript>Cl<Subscript>10</Subscript>

The fullerenes that violate isolated pentagon rule (IPR) have unusual electronic properties resulting from their fused-pentagon structures. Numerous non-IPR fullerenes have now been captured by chlorination, affording opportunity to go insight into the properties involved in non-IPR fullerenes in the forms of chlorofullerenes (CFs). Here cyclic voltammetry (CV) is employed to probe the electrochemical properties of non-IPR ^#1809C₆₀Cl₈ in comparison with those of ^#271C₅₀Cl₁₀. Differing from IPR-satisfying CFs such as C₆₀Cl₈ and C₆₀Cl₁₀ (referring to I _h-symmetric C₆₀), the two non-IPR CFs exhibit divergent electroactive polymerization characters. In addition, the electrocatalytic effect of ferrocene that is otherwise employed as internal reference has been shown in the CV process of CFs.     

LaNi<Subscript>0.5</Subscript>Ti<Subscript>0.5</Subscript>O<Subscript>3</Subscript>/CoFe<Subscript>2</Subscript>O<Subscript>4</Subscript>-based sensor for sensitive determination of paracetamol

A novel electrochemical sensor based on LaNi_0.5Ti_0.5O₃/CoFe₂O₄ nanoparticle-modified electrode (LNT–CFO/GCE) for sensitive determination of paracetamol (PAR) was presented. Experimental conditions such as the concentration of LNT–CFO, pH value, and applied potential were investigated. Under the optimum conditions, the electrochemical performances of LNT–CFO/GCE have been researched on the oxidation of PAR. The electrochemical behaviors of PAR on LNT–CFO/GCE were investigated by cyclic voltammetry. The results showed that LNT–CFO/GCE exhibited excellent promotion to the oxidation of PAR. The over-potential of PAR decreased significantly on the modified electrode compared with that on bare GCE. Furthermore, the sensor exhibits good reproducibility, stability, and selectivity in PAR determination. Linear response was obtained in the range of 0.5 to 901 μM with a detection limit of 0.19 μM for PAR.     

Lithium AlPO<Subscript>4</Subscript> composite polymer battery with nanostructured LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript> cathode

The borate ester plasticized AlPO₄ composite solid polymer electrolytes (SPE) have been synthesized and studied as candidates for lithium polymer battery (LPB) application. The electrochemical and thermal properties of SPE were shown to be suitable for practical LPB. Nanostructured LiMn₂O₄ with spherical particles was synthesized via ultrasonic spray pyrolysis technique and has shown a superior performance to the one prepared via conventional methods as cathode for LPB. Furthermore, the AlPO₄ addition to the polymer electrolyte has improved the polymer battery performance. Based on the AC impedance spectroscopy data, the performance improvement was suggested as being due to the cathode/polymer electrolyte interface stabilization in the presence of AlPO₄. The Li/composite polymer electrolyte/nanostructured LiMn₂O₄ electrochemical cell showed stable cyclability during the various current density tests, and its performance was found to be quite acceptable for practical utilities at ambient temperature and showed remarkable improvements at 60 °C compared with the solid state reaction counterpart.     

Synthesis of sodium tungstate from the system Na<Subscript>2</Subscript>C<Subscript>2</Subscript>O<Subscript>4</Subscript>-NaNO<Subscript>3</Subscript>-WO<Subscript>3</Subscript>

The physicochemical basis of the heterogeneous reaction between the components of the system (sodium oxalate)-(sodium nitrate)-(tungsten(VI) oxide) has been studied. The reaction of WO₃ with sodium oxalate-nitrate mixtures occurs at a lower temperature and at a higher rate than the reaction with pure sodium carbonate. A high-yield process for the synthesis of high-purity sodium tungstate has been developed on the basis of this study.     

Sn-doped Li<Subscript>1.2</Subscript>Mn<Subscript>0.54</Subscript>Ni<Subscript>0.13</Subscript>Co<Subscript>0.13</Subscript>O<Subscript>2</Subscript> cathode materials for lithium-ion batteries with enhanced electrochemical performance

Sn-doped Li-rich layered oxides of Li_1.2Mn_0.54-x Ni_0.13Co_0.13Sn _x O₂ have been synthesized via a sol-gel method, and their microstructure and electrochemical performance have been studied. The addition of Sn⁴⁺ ions has no distinct influence on the crystal structure of the materials. After doped with an appropriate amount of Sn⁴⁺, the electrochemical performance of Li_1.2Mn_0.54-x Ni_0.13Co_0.13Sn _x O₂ cathode materials is significantly enhanced. The optimal electrochemical performance is obtained at x = 0.01. The Li_1.2Mn_0.53Ni_0.13Co_0.13Sn_0.01O₂ electrode delivers a high initial discharge capacity of 268.9 mAh g^?1 with an initial coulombic efficiency of 76.5% and a reversible capacity of 199.8 mAh g^?1 at 0.1 C with capacity retention of 75.2% after 100 cycles. In addition, the Li_1.2Mn_0.53Ni_0.13Co_0.13Sn_0.01O₂ electrode exhibits the superior rate capability with discharge capacities of 239.8, 198.6, 164.4, 133.4, and 88.8 mAh g^?1 at 0.2, 0.5, 1, 2, and 5 C, respectively, which are much higher than those of Li_1.2Mn_0.54Ni_0.13Co_0.13O₂ (196.2, 153.5, 117.5, 92.7, and 43.8 mAh g^?1 at 0.2, 0.5, 1, 2, and 5 C, respectively). The substitution of Sn⁴⁺ for Mn⁴⁺ enlarges the Li⁺ diffusion channels due to its larger ionic radius compared to Mn⁴⁺ and enhances the structural stability of Li-rich oxides, leading to the improved electrochemical performance in the Sn-doped Li_1.2Mn_0.54Ni_0.13Co_0.13O₂ cathode materials.     

EQCM study of redox properties of PEDOT/MnO<Subscript>2</Subscript> composite films in aqueous electrolytes

Electrochemical behavior of poly-3,4-ethylenedioxythiophene composites with manganese dioxide (PEDOT/MnO₂) has been investigated by cyclic voltammetry and electrochemical quartz crystal microbalance at various component ratios and in different electrolyte solutions. The electrochemical formation of PEDOT film on the electrode surface and PEDOT/MnO₂ composite film during the electrochemical deposition of manganese dioxide into the polymer matrix was gravimetrically monitored. The mass of manganese dioxide deposited into PEDOT at different time of electrodeposition and apparent molar mass values of species involved into mass transfer during redox cycling of PEDOT/MnO₂ composites were evaluated. It was found that during the redox cycling of PEDOT/MnO₂ composite films with various MnO₂ content, the oppositely directed fluxes of counterions (anions and cations) occur, resulting in a change of the slope of linear parts of the Δf–E plots with changing the mass fraction of MnO₂ in the composite film.Rectangular shape of cyclic voltammograms of PEDOT/MnO₂ composites with different loadings of manganese dioxide was observed, which is characteristic of the pseudocapacitive behavior of the composite material. Specific capacity values of PEDOT/MnO₂ composites obtained from cyclic voltammograms were about 169 F g^?1. The specific capacity, related to the contribution of manganese dioxide component, was about 240 F g^?1.     

Phase equilibria in the NaCl-NaBr-Na<Subscript>2</Subscript>MoO<Subscript>4</Subscript> system

The binary systems NaBr-Na₂MoO₄ and NaBr-Na₃ClMoO₄ and the ternary system NaCl-NaBr-Na₂MoO₄ have been studied using physicochemical methods (DTA and powder X-ray diffraction). The compositions, melting points, and heats of phase transitions have been determined for three invariant points. The liquidus surface of the ternary system consists of the fields of sodium molybdate, Na₃ClMoO₄, and sodium chloride and bromide solid solutions. The eutectics melt at 531, 612, and 524°C; the respective heats of phase transitions are 149.27, 167.55, and 215.38 J/g.