Praseodymium-containing catalysts for oxidative dehydrogenation of organic compounds

A method is developed for incorporating praseodymium into magnesium–aluminum hydrotalcites, which are precursors for oxide catalysts for oxidative dehydrogenation (ODH) of alkanes. Oxide catalyst samples that contain praseodymium and various combinations of magnesium, aluminum, chromium, vanadium, molybdenum, and niobium are prepared. The catalytic properties of the prepared catalysts in ethane, propane, and butane ODH reactions are studied. Into some of our studied multicomponent catalysts, the incorporation of praseodymium enhances the reaction selectivity and increases yields of desired products.     

Oxidative Dehydrogenation of <Emphasis Type="Italic">n</Emphasis>-Butenes to 1,3-Butadiene over Bismuth Molybdate and Ferrite Catalysts: A Review

1,3-Butadiene, an important raw material for a variety of chemical products, can be produced via the oxidative dehydrogenation (ODH) of n-butenes over multicomponent oxide catalysts based on bismuth molybdates and ferrites. In this review, the basic concept, reaction mechanism, and catalysts typically used in an ODH reaction are discussed.     

静电纺丝法制备硼掺杂氧化硅纳米纤维用于低碳烷烃氧化脱氢制烯烃

乙烯和丙烯等低碳烯烃是重要的基础有机化工产品,广泛应用于化工生产的各个领域.相比于其他工艺,低碳烷烃氧化脱氢制烯烃工艺具有不受热力学平衡限制、无积炭等特点而被广泛研究.近年发现六方氮化硼(h-BN)、硼化硅(SiB6)和磷酸硼(BPO4)等非金属硼基催化剂能够高效催化烷烃氧化脱氢反应,并抑制产物烯烃的过度氧化,表现出高的催化活性和烯烃选择性.大量的研究表明,硼基催化剂活性起源于催化剂表面的"BO"物种(如B-O和B-OH等基团).氧化硼(B2O3)作为一种氧化气氛中化学性质稳定的含硼化合物,兼具丰富的"BO"位点,在反应条件下可形成多种结构以适用不同的化学环境,为制备高效的烷烃氧化脱氢催化剂提供了可能.在之前的研究中,多将B2O3浸渍在常规的TiO2,SiO2,A12O3等三维多孔载体上用于氧化脱氢反应.考虑到B2O3结构的灵活性和易于成键特性,需开发更为有效的合成策略,以提升B2O3催化剂在氧化脱氢反应中的活性和稳定性.本文采用静电纺丝技术合成了直径为100～150 nm的多孔掺硼二氧化硅纳米纤维(PBSN)用于低碳烷烃氧化脱氢反应.静电纺丝法合成的催化剂中硼物种在开放的氧化硅纤维骨架上均匀分散且稳定固载.一维纳米纤维结构不仅有利于扩散,且赋予催化剂在高重时空速(WHSV)条件下优异的烷烃氧化脱氢反应活性.在乙烷氧化脱氢反应中,当乙烷的转化率达到44.3％时,乙烯的选择性和产率分别为84％和44.2 μmol gcat-1 s-1.而在丙烷脱氢反应中,当丙烷转化率为19.2％时,总烯烃选择性及丙烯产率分别为90％和76.6 μmol gcat-1 s-1.在温度为545 ℃,丙烷WHSV高达84.6 h-1的条件下,催化剂保持长时间稳定.与其他负载型氧化硼催化剂相比,PBSN催化剂具有更高的烯烃选择性和稳定性.研究表明,在氧化硅负载B2O3催化剂催化丙烷氧化脱氢反应中,载体中Si-OH基团的存在可能会降低丙烯的选择性.瞬态分析和动力学实验表明,硼基催化剂催化烷烃氧化脱氢反应过程中O2的活化受到烷烃的影响.本文不仅为高效硼基催化剂的合成提供了新思路,也为深入理解该类催化剂上烷烃氧化脱氢反应过程提供了实验支撑.     

Oxidative dehydrogenation of <Emphasis Type="Italic">n</Emphasis>-butenes to 1,3-butadiene over BiMoFe<Subscript>0.65</Subscript>P<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> catalysts: effect of phosphorous contents

A series of BiMoFe_0.65P _x oxide catalysts with varying phosphorous contents from 0.0 to 0.6 mol ratio were prepared by a co-precipitation method, and oxidative dehydrogenation (ODH) was carried out to produce 1,3-butadiene (BD) from n-butenes. The physico-chemical properties of the oxide catalysts were characterized by X-ray diffraction (XRD), Raman spectroscopy, N₂ sorption, and NH₃ and 1-butene temperature-programmed desorption (TPD). Among the catalysts studied here, BiMoFe_0.65P_0.1 oxide catalyst showed the highest conversion and selectivity to BD. From the result of 1-butene TPD, the higher catalytic activity is related to the amount of weakly bounded intermediate and the desorbing temperature of strongly bounded intermediates. Also, the higher catalytic activity likely originates from the acidity of the BiMoFe_0.65P_0.1 oxide catalyst; its acidity was higher than that of phosphorous-free oxide catalyst and further contained other oxide catalysts. BiMoFe_0.65P_0.1 oxide catalyst is stable and no significant deactivation for 100 h ODH reaction was shown.     

Chromium,vanadium, molybdenum,tungsten, magnesium,and aluminum hydrotalcite hydroxo salts and oxide catalysts on their base

A method is developed for the synthesis of chromium-containing catalysts for the oxidative dehydrogenation (ODH) of alkanes, comprising the precipitation, from nitrate solutions, of mixtures of isomorphic hydrotalcite-type magnesium aluminum and magnesium chromium hydroxocarbonates and the incorporation of oxovanadate, oxomolybdate, and oxotungstate ions by means of anion exchange and subsequent heat treatment. A series of oxide catalyst samples with progressively more complex compositions were prepared: Mg-Al, V-Mg-Al, V-Mo-Mg-Al, Cr-V-Mg-Al, Cr-V-Mo-Mg-Al, and Cr-V-Mo-W-Mg-Al. The catalytic properties of these complex oxides in the ODH of ethane and propane are improved with progressively complex compositions. Chromium-containing catalysts have higher selectivities and provide higher conversions compared to state-of-the-art iron- and nickel-containing oxides.     

Ytterbium-Containing Magnesium–Aluminum Hydroxo Salts with a Hydrotalcite-Type Structure

A method is developed for inserting ytterbium into Mg–Al hydroxo salts that have a hydrotalcitetype layered structure, as well as for the chemical analyses of complex hydroxo salts containing ytterbium in various combinations with magnesium, aluminum, chromium, vanadium, molybdenum, and niobium. The formation conditions of these hydroxo salts have been studied by potentiometric titration, their samples have been prepared, and X-ray diffraction patterns recorded. The prepared hydroxo salt samples have been tested as precursors for oxide catalysts of oxidative dehydrogenation (ODH) of alkanes.     

B-MWW Zeolite: The Case Against Single-Site Catalysis

Boron-containing materials have recently been identified as highly selective catalysts for the oxidative dehydrogenation (ODH) of alkanes to olefins. It has previously been demonstrated by several spectroscopic characterization techniques that the surface of these boron-containing ODH catalysts oxidize and hydrolyze under reaction conditions, forming an amorphous B₂(OH)_xO_(3−x/2) (x=0–6) layer. Yet, the precise nature of the active site(s) remains elusive. In this Communication, we provide a detailed characterization of zeolite MCM-22 isomorphously substituted with boron (B-MWW). Using ¹¹B solid-state NMR spectroscopy, we show that the majority of boron species in B-MWW exist as isolated BO₃ units, fully incorporated into the zeolite framework. However, this material shows no catalytic activity for ODH of propane to propene. The catalytic inactivity of B-MWW for ODH of propane falsifies the hypothesis that site-isolated BO₃ units are the active site in boron-based catalysts. This observation is at odds with other traditionally studied catalysts like vanadium-based catalysts and provides an important piece of the mechanistic puzzle.     

B‐MWW Zeolite: The Case Against Single‐Site Catalysis

Boron‐containing materials have recently been identified as highly selective catalysts for the oxidative dehydrogenation (ODH) of alkanes to olefins. It has previously been demonstrated by several spectroscopic characterization techniques that the surface of these boron‐containing ODH catalysts oxidize and hydrolyze under reaction conditions, forming an amorphous B₂(OH)_xO_(3?x/2) (x=0–6) layer. Yet, the precise nature of the active site(s) remains elusive. In this Communication, we provide a detailed characterization of zeolite MCM‐22 isomorphously substituted with boron (B‐MWW). Using ¹¹B solid‐state NMR spectroscopy, we show that the majority of boron species in B‐MWW exist as isolated BO₃ units, fully incorporated into the zeolite framework. However, this material shows no catalytic activity for ODH of propane to propene. The catalytic inactivity of B‐MWW for ODH of propane falsifies the hypothesis that site‐isolated BO₃ units are the active site in boron‐based catalysts. This observation is at odds with other traditionally studied catalysts like vanadium‐based catalysts and provides an important piece of the mechanistic puzzle.     

丙烷氧化脱氢不同硅基载体负载钒氧化物催化剂的TPSR表征

研究了钒负载不同氧化硅载体(Silica-gel,SBA-15,MCM-41,fumed-SiO2,Nano-SiO2)的丙烷氧化脱氢(ODH)催化剂的结构特征和催化性能,结合催化剂的程序升温表面反应(TPSR)的差热热重质谱(TG-DSC-MS)和原位紫外漫反射光谱(UV-vis DRS)等技术,研究钒在载体上的分散度和晶格氧的反应性。结果表明:负载型钒氧化物催化剂的活性取决于钒在不同硅基载体上的分散度,高度分散的隔离的四配位V5+是丙烷氧化脱氢的活性位。C3H6选择性主要与催化剂的平均孔径相关联,平均孔径越小,产物C3H6越易发生深度氧化。另外,不同氧化硅载体晶格氧与钒的结合强度对C3H6的选择性也产生影响,结合力较弱的V-O-Si中的晶格氧是丙烷氧化脱氢的燃烧位,且燃烧温度随晶格氧与钒、硅结合强度的减小而降低。而与钒结合力较强的V=O和V-O-V中的晶格氧是丙烷氧化脱氢的选择氧化位。硅基载体形貌和结构的不同导致负载型钒氧化物催化剂丙烷氧化脱氢活性和选择性发生差异。     

Oxidative Dehydrogenation on Nanocarbon: Intrinsic Catalytic Activity and Structure–Function Relationships

Physical and chemical insights into the nature and quantity of the active sites and the intrinsic catalytic activity of nanocarbon materials in alkane oxidative dehydrogenation (ODH) reactions are reported using a novel in situ chemical titration process. A study on the structure–function relationship reveals that the active sites are identical both in nature and function on various nanocarbon catalysts. Additionally, the quantity of the active sites could be used as a metric to normalize the reaction rates, and thus to evaluate the intrinsic activity of nanocarbon catalysts. The morphology of the nanocarbon catalysts at the microscopic scale exhibits a minor influence on their intrinsic ODH catalytic activity. The number of active sites calculated from the titration process indicates the number of catalytic centers that are active (that is, working) under the reaction conditions.     

Surface-inspired molecular vanadium oxide catalysts for the oxidative dehydrogenation of alcohols: evidence for metal cooperation and peroxide intermediates

On the basis that thiacalix[4]arene (H(4)T4A) complex (PPh(4) )(2) [H(2)T4A(VO(2))](2) (Ia) was found to be an adequate functional model for surface species occurring on vanadium oxide based catalysts and itself catalyses the oxidative dehydrogenation (ODH) of alcohols, an analogue containing 2,2'-thiobis(2,4-di-tert-butylphenolate), (S)L(2-), as ligand, namely, (PPh(4))(2)[(S)LVO(2)](2) (II) was investigated in the same context. Despite the apparent similarity of Ia and II, studies on II revealed several novel insights, which are also valuable in connection with surfaces of vanadia catalysts: 1) For Ia and II similar turnover numbers (TONs) were found for the ODH of activated alcohols, which indicates that the additional OH units inherent to Ia do not contribute particularly to the activity of this complex, for instance, through prebinding of the alcohol. 2) On dissolution II enters into an equilibrium with a monomeric form, which is the predominant species in solution; nevertheless, ODH proceeds exclusively at the dimeric form, and this stresses the need for cooperation of two vanadium centres. 3) By omitting O(2) from the system during the oxidation of 9-fluorenol, the reduced form of the catalyst could be isolated and fully characterised (including single-crystal X-ray analysis). The corresponding intermediate had been elusive in case of thiacalixarene system Ia. 4) Reoxidation was found to proceed via a peroxide intermediate that also oxidises one alcohol equivalent. As the peroxide can also perform mono- and dioxygenation of the thioether group in II, after a number of turnovers the active catalyst contains a sulfone group. The reduced form of this ultimate catalyst was also isolated and structurally characterised. Possible implications of 1)-4) for the function of heterogeneous vanadia catalysts are discussed.     

Ytterbium-Containing Oxide Catalysts for Oxidative Dehydrogenation of Hydrocarbons

Oxide catalyst samples for the oxidative dehydrogenation (ODH) of alkanes were prepared by heat treatment of precursors, namely, hydrotalcite-related magnesium aluminum double hydroxo salts containing ytterbium, as well as magnesium, aluminum, chromium, vanadium, molybdenum, and niobium in various combinations. Their catalytic activities were studied. Some catalysts were found to have high efficiency in ODH of ethane, propane, and isobutane, increasing the product yield and enhancing the reaction selectivity.     

混合价黑色氧化铕的制备及其性质初步研究

用含肼甲酸铕在Ｎ２气氛中热分解的方法制得了混合价黑色氧化铕粉末。对它的有关物理化学性质进行了初步研究,得到了相应的结论。     

Extraction of europium complexes with 1,2,4,5-benzenetetracarboxylic acid and neutral ligands

Extraction of mixed-ligand europium complexes with 1,2,4,5-benzenetetracarboxylic (pyromellitic) acid and neutral ligands was studied. The complexation of europium with the ligands is discussed on the basis of data on europium distribution in extraction systems, as well as IR and luminescent spectroscopy data of extracts. Crystalline polynuclear europium complexes with pyromellitic acid and 1,10-phenanthroline and tris(hydroxymethyl)aminomethane were isolated from the extracts. The composition of pyrolysis products of extracts was studied. It was shown that nanosized bulk samples of europium oxide can be obtained by the pyrolysis of saturated extracts. Differences in the morphology of europium oxide nanoparticles were revealed in the samples obtained by pyrolysis of extracts differing in composition at the same temperature and time.     

Bulk and surface structures of V2O5/ZrO2 catalysts for n-butane oxidative dehydrogenation

The present investigation focuses on the structural properties and reactivity of zirconia-supported vanadium oxide catalysts, prepared by equilibrium adsorption in basic (pH 10) or in acid (pH 2.7) conditions with vanadium content up to 6 wt.% (pH 10) and up to 11.6 wt.% (pH 2.7). The samples, heated at 823 K for 5 h in air, were characterized by X-ray diffraction, Raman spectroscopy and TPR, both as prepared and after leaching with an ammonia solution to remove species not anchored to the zirconia surface. Some representative samples were also tested for the n-butane oxidative dehydrogenation (ODH) reaction. Depending on vanadium content, various vanadium species were identified by Raman spectroscopy that reacted differently on exposure to H₂. At similar loading, the fraction of vanadium in a dispersed state and thus interacting with the support was higher in samples prepared at pH 10 than in those at pH 2.7. Samples prepared at pH 2.7 contained a higher fraction of large polymeric structures in addition to ZrV₂O₇ and V₂O₅.In line with literature data for propane ODH on similar catalysts, our catalytic results suggested that the active sites for the ODH reaction are associated with the V–O–V bonds of the polymeric exposed structures, whereas the Zr–O–V sites favour alkane combustion.     

Phosphate modified carbon nanotubes for oxidative dehydrogenation of n-butane

Catalytic performance of phosphate-modified carbon nanotube(PoCNT) catalysts for oxidative dehydrogenation(ODH) of n-butane has been systematically investigated. The Po CNT catalysts are characterized by SEM, TEM, XPS and TG techniques. We set the products selectivity as a function of butane conversion over various phosphate loading, and it is found that the PoCNT catalyst with the 0.8% phosphate weight loading(0.8PoCNT) exhibits the best catalytic performance. When the phosphate loading is higher than 0.8 wt%, the difference of catalytic activity among the PoCNT catalysts is neglectable. Consequently, the ODH of n-butane over the 0.8PoCNT catalyst is particularly discussed via changing the reaction conditions including reaction temperatures, residence time and n-butane/O_2 ratios. The interacting mechanism of phosphate with the oxygen functional groups on the CNT surface is also proposed.     

Quantitative determination of the speciation of surface vanadium oxides and their catalytic activity

A quantitative method based on UV-vis diffuse reflectance spectroscopy (DRS) was developed that allows determination of the fraction of monomeric and polymeric VO(x) species that are present in vanadate materials. This new quantitative method allows determination of the distribution of monomeric and polymeric surface VO(x) species present in dehydrated supported V(2)O(5)/SiO(2), V(2)O(5)/Al(2)O(3), and V(2)O(5)/ZrO(2) catalysts below monolayer surface coverage when V(2)O(5) nanoparticles are not present. Isolated surface VO(x) species are exclusively present at low surface vanadia coverage on all the dehydrated oxide supports. However, polymeric surface VO(x) species are also present on the dehydrated Al(2)O(3) and ZrO(2) supports at intermediate surface coverage and the polymeric chains are the dominant surface vanadia species at monolayer surface coverage. The propane oxidative dehydrogenation (ODH) turnover frequency (TOF) values are essentially indistinguishable for the isolated and polymeric surface VO(x) species on the same oxide support, and are also not affected by the Br?nsted acidity or reducibility of the surface VO(x) species. The propane ODH TOF, however, varies by more than an order of magnitude with the specific oxide support (ZrO(2) > Al(2)O(3) > SiO(2)) for both the isolated and polymeric surface VO(x) species. These new findings reveal that the support cation is a potent ligand that directly influences the reactivity of the bridging V-O-support bond, the catalytic active site, by controlling its basic character with the support electronegativity. These new fundamental insights about polymerization extent of surface vanadia species on SiO(2), Al(2)O(3), and ZrO(2) are also applicable to other supported vanadia catalysts (e.g., CeO(2), TiO(2), Nb(2)O(5)) as well as other supported metal oxide (e.g., CrO(3), MoO(3), WO(3)) catalyst systems.     

Enhanced NiO Dispersion on a High Surface Area Pillared Heterostructure Covered by Niobium Leads to Optimal Behaviour in the Oxidative Dehydrogenation of Ethane

A Nb-containing siliceous porous clay heterostructure (PCH) with Nb contents from 0 to 30 wt %) was prepared from a bentonite and used as support in the preparation of supported NiO catalysts with NiO loading from 15 to 80 wt %. Supports and NiO-containing catalysts were characterised by several physicochemical techniques and tested in the oxidative dehydrogenation (ODH) of ethane. The characterisation studies on Nb-containing supports showed the presence of well-anchored Nb⁵⁺ species without the formation of Nb₂O₅ crystals. High dispersion of nickel oxide with low crystallinity was observed for the Nb-containing PCH supports. In addition, when NiO is supported on these Nb-containing porous clays, it is more effective in the ODH of ethane (ethylene selectivity of ca. 90 %) than NiO supported on the corresponding Nb-free siliceous PCH or on Nb₂O₅ (ethylene selectivities of ca. 30 and 60 %, respectively). Factors such as the NiO–Nb⁵⁺ interaction, the NiO particle size and the properties of surface Niⁿ⁺ species were shown to determine the catalytic performance.     

Carbon-Doped BN Nanosheets for the Oxidative Dehydrogenation of Ethylbenzene

Carbon-based catalysts have demonstrated great potential for the aerobic oxidative dehydrogenation reaction (ODH). However, its widespread application is retarded by the unavoidable deactivation owing to the appearance of coking or combustion under ODH conditions. The synthesis and characterization of porous structure of BCN nanosheets as well as their application as a novel catalyst for ODH is reported. Such BCN nanosheets consist of hybridized, randomly distributed domains of h-BN and C phases, where C, B, and N were confirmed to covalent bond in the graphene-like layers. Our studies reveal that BCN exhibits both high activity and selectivity in oxidative dehydrogenation of ethylbenzene to styrene, as well as excellent oxidation resistance. The discovery of such a simple chemical process to synthesize highly active BCN allows the possibility of carbocatalysis to be explored.     

In situ UV-vis-NIR diffuse reflectance and Raman spectroscopy and catalytic activity studies of propane oxidative dehydrogenation over supported CrO3/ZrO2 catalysts

The molecular structures, oxidation states, and reactivity of 3 and 6% CrO3/ZrO2 catalysts prepared by incipient wetness impregnation were examined under different conditions. The in situ Raman spectroscopic studies under dehydrated conditions reveal that the 3 and 6% CrO3/ZrO2 catalysts possess equal amounts of monochromate and polychromate species. Consequently, monolayer coverage on this ZrO2 support is about 3% CrO3. The 6% CrO3/ZrO2 possesses an additional Raman band due to Cr2O3 crystals corresponding to the remaining 3% CrO3. Furthermore, during reaction conditions the polychromate species is preferentially reduced, the monochromate species are slightly affected, and the Cr2O3 crystals are not affected. The in situ UV-vis-NIR diffuse reflectance spectroscopy results reveal that under steady-state reaction conditions the extent of reduction and edge energy position of surface Cr6+ cations increase with an increase in reduction environment for the 3 and 6% CrO3/ZrO2 samples. Propane oxidative dehydrogenation (ODH) studies reveal that the catalytic activity expressed in moles of propane converted per gram catalyst per second is similar for the two catalysts, which is consistent with equal amounts of molecularly dispersed chromia present. The turnover frequency for the 6% CrO3/ZrO2 catalyst is, however, smaller than that for the 3% CrO3/ZrO2 sample due to the presence of Cr2O3 crystals, which are relatively inactive for propane ODH. For this catalytic system and for the experimental conditions used, propene, CO, and CO2 are primary products. Furthermore, the 33-39% propene selectivity is not affected by the C3H8/O2 ratio for both catalysts. Structure-reactivity studies suggest that the molecularly dispersed species are present in equal amounts in the 3 and 6% CrO3/ZrO2 samples as Cr6+ monochromate and polychromate species are the most effective catalytic active sites taking part in the propane ODH reaction.