空间用GaInP/GaAs/In0.3Ga0.7 As(1 eV)倒装三结太阳电池研制

采用阶变缓冲层技术 (step-graded) 外延生长了具有更优带隙组合的倒装GaInP/GaAs/In_0.3Ga_0.7As(1.0 eV) 三结太阳电池材料, TEM和HRXRD测试表明晶格失配度为2%的In_0.3Ga_0.7As 底电池具有较低的穿透位错密度和较高的晶体质量, 达到太阳电池的制备要求. 通过键合、剥离等工艺制备了太阳电池芯片. 面积为 10.922 cm² 的太阳电池芯片在空间光谱条件下转换效率达到32.64% (AM0, 25 ℃), 比传统晶格匹配的 GaInP/GaAs/Ge(0.67 eV) 三结太阳电池的转换效率提高3个百分点. 关键词： 太阳电池 三结 倒装结构     

N2-Ar��Ƶ�ŵ���浪���ĵ�����������ģ��

N2-Ar射频放电等离子体广泛应用于微电子工业的刻蚀、氮化物薄膜的制备及金属表面氮化等技术领域。开发了N2-Ar混合气体容性耦合射频放电PIC/MC自洽模型,模型主要描述了e-,N2+,N+,Ar+等主要带电粒子的行为分布。等离子体的碰撞过程分别考虑了带电粒子(e-,N2+,N+,Ar+)与基态中性N2分子和Ar原子的21种碰撞反应过程。模拟结果表明,在纯N2及N2-Ar混合气体容性耦合射频放电中,各种带电粒子的数密度都在等离子体区达到最大值,且氮分子离子为主要粒子;在N2容性耦合射频放电中,加入10%氩气时,N+平均能量有所增加,在射频电极处两种氮离子(N2+,N+)高能粒子所占比例增加。本研究对认识N2-Ar射频放电等离子体过程微观机理具重要意义。     

Optimization of transparent conductor-embedding front electrodes for efficient light management

An optically and electrically optimum designed front electrode is reported by using a transparent conductive oxide (TCO) film integration. A substantial enhancement of light absorption was achieved by reduction of silver (Ag) grid shading losses while holding a similar series resistance. This obviously improves the solar cell efficiency with a significant reduction in the use of Ag shading area by one fourth. Due to the optical and electrical excellent indium-tin-oxide (ITO), the TCO benefits to widen the light transparent surface and spontaneously works as an anti-reflection coating layer.We have demonstrated that a trade-off between the optical and the electrical aspects should be considered to transfer the optical benefit by ITO supporting transparent electrode to the practical electrical advantage of current enhancement. Transmission line method was applied to profile the variation of contact resistances and specific contact resistance for optimum design of ITO-integrated front electrodes.     

载流子选择性接触:高效硅太阳电池的选择

太阳电池可看成由光子吸收层和接触层两个基本单元组成,接触层是高复合活性金属界面和光子吸收层之间的区域.为了进一步提高硅太阳电池的转换效率,关键是降低光子吸收层和接触之间的复合损失.近年来,载流子选择性接触引起了光伏界的研究兴趣,其被认为是接近硅太阳电池效率理论极限的最后的障碍之一.本文分析了三种类型的载流子选择性接触:在光子吸收层与金属界面之间引入薄的重掺杂层,即所谓的发射极或背面场;利用两种材料之间的导带或价带对齐;利用高功函数的金属氧化物与晶硅接触从而在晶硅中感应能带弯曲.基于一维太阳电池模拟软件wx AMPS,模拟了扩散同质结硅太阳电池[结构为(p~+)c-Si/(n)c-Si/(n~+)c-Si]、非晶硅薄膜硅异质结太阳电池[结构为(p~+)a-Si/(i)a-Si/(n)c-Si/(i)a-Si/(n~+)a-Si]和氧化物薄膜硅异质结太阳电池[结构为(n)MoO_x/(n)c-Si/(n)TiO_x]暗态下的能带结构和载流子浓度的空间分布,其中c-Si为晶硅;a-Si为非晶硅;(i),(n)和(p)分别表示本征、n型掺杂和p型掺杂.模拟结果表明:载流子选择性接触的核心是在接触处晶硅表面附近形成载流子浓度空间分布的不对称进而使得电导率的不对称,形成了对电子的高阻和空穴的低阻或者对空穴的高阻和电子的低阻,从而让空穴轻松通过同时阻挡电子,或者让电子轻松通过同时阻挡空穴,形成空穴选择性接触或者电子选择性接触.     

直接键合的三结太阳能电池研究

本文研制了直接键合的三结GaInP/GaAs/InGaAsP太阳电池.直接键合技术可以减少晶格不匹配的材料在外延生长过程中产生的线位错和面缺陷,将缺陷限制在界面几十纳米的薄层而不向内扩散,是未来实现高效多结电池的发展趋势之一.此类电池国内鲜有报道.本文键合三结电池的键合界面采用p+GaAs/n+InP结构,得到电池开路电压3.0 V,在电池结构没有优化的情况下获得效率24%,表面未做减反膜.开路电压表明三结电池实现了串联,为单片集成的高效多结电池提供了新的途径.对实验结果进行了分析并给出了改进措施.     

Microcrystalline silicon oxide (μc-SiO:H) alloys as a contact layer for highly efficient Si thin film solar cell

We observe >6% efficiency enhancement in silicon thin film solar cell using a p-type microcrystalline silicon oxide (μc-SiO:H) contact layer between transparent conducting oxide (TCO) electrode and the hydrogenated amorphous silicon (a-Si:H) layer. The role of the above contact layer is to reduce the Schottky barrier effect as well as the hetero-junction barrier formation at the interface. Despite its nanometer scale thickness, the properties of the contact layer significantly affect the solar parameters. Based on our results, p-type doped μc-SiO:H can be an ideal material as a contact layer due to its good optical response without noticeable degradation in its electrical property.     

Design of near-unity transmittance dielectric/Ag/ITO electrodes for GaN-based light-emitting diodes

We designed a near-unity transmittance dielectric/Ag/ITO electrode for high-efficiency GaN-based light-emitting diodes by using the scattering matrix method. The transmittance of an ultrathin metal layer, sandwiched between a dielectric layer and an ITO layer, was investigated as a function of the thickness and the optical constant of each constituent layer. Three different metals (Ag, Au, and Al) were examined as the metal layer. The analytical simulation indicated that the transmittance of a dielectric/metal/ITO multilayer film is maximized with an approximately 10-nm-thick Ag layer. Additionally, the transmittance also tends to increase as the refractive index of the upper dielectric layer increases. By tailoring the thickness of the dielectric layer and the ITO layer, the dielectric/Ag/ITO structure yielded a transmittance of 0.97, which surpasses the maximum transmittance (0.91) of a single ITO film. Furthermore, this extraordinary transmittance was present for other visible wavelengths of light, including violet and green colors. A complex phasor diagram model confirmed that the transmittance of the dielectric/metal/ITO multilayer film is influenced by the interference of reflected partial waves. These numerical findings underpin a rational design principle for metal-based multilayer films that are utilized as transparent electrodes for the development of efficient light-emitting diodes and solar cell devices.     

退火对AlGaInP/GaInP多量子阱 LED外延片性能的影响

采用LP-MOCVD技术在n-GaAs衬底上生长了AlGaInP/GaInP多量子阱红光LED外延片.研究表明退火对外延片性能有重要影响.与未退火样品相比,460℃退火15min,外延片p型GaP层的空穴浓度由5.6×10¹⁸cm^-3增大到6.5×10¹⁸cm^-3,p型AlGaInP层的空穴浓度由6.0×10¹⁷cm^-3增大到1.1×10¹⁸cm^-3.但退火温度为780℃时,p型GaP层和p型AlGaInP层的空穴浓度分别下降至8×10¹⁷cm^-3和1.7×10¹⁷cm^-3,且Mg原子在AlGaInP系材料中的扩散加剧,导致未掺杂AlGaInP/GaInP多量子阱呈现p型电导.在460～700℃退火范围内,并没有使AlGaInP/GaInP多量子阱的发光性能发生明显变化.但退火温度为780℃时,AlGaInP/GaInP多量子阱的发光强度是退火前的2倍.     

Transparent conducting oxides for electrode applications in light emitting and absorbing devices

In both light emitting devices such as light emitting diodes (LEDs), and light absorbing devices such as solar cells (also photodetectors), which are gaining considerable interest for their energy saving and energy production capability, respectively, a compromise must be struck between the need to increase the light emitting/absorbing area/potential and the need for low series resistance of the metal contact grid. This undesirable compromise can be mitigated by using transparent conducting oxides (TCOs), which heretofore have been dominated by ITO (indium tin oxide—an In-rich alloy of indium oxide and tin oxide). Due to the expected scarcity of Indium used in ITO, efforts are underway to develop indium-free TCOs for the above-mentioned devices as well as flat panel displays. ZnO heavily doped with Ga or Al (GZO or AZO) is becoming a very attractive candidate for future generation TCOs. GZO and AZO as well as multilayer TCOs consisting of two TCO layers with a thin metal layer in between have been widely investigated for LEDs and solar cells to enhance device performance. This article succinctly reviews the latest developments in and properties of TCOs, particularly in relation to thin film transparent electrode applications for LEDs and solar cells. Pertinent critical issues and possible solutions are provided as well.     

空间用倒装三结太阳能电池及其抗辐射性能研究

使用金属有机化学气相沉积技术,在4英寸GaAs衬底上获得了空间用GaInP/GaAs/In_(0.3)Ga_(0.7)As倒装三结太阳能电池.高分辨X射线衍射和阴极射线发光测试结果表明AlInGaAs应力渐变缓冲层的晶格弛豫度约100%,其整面平均穿透位错密度约5.4×10~6/cm~2.与GaInP/InGaAs/Ge常规三结太阳能电池相比,在AM0光谱、25℃测试条件下,面积24 cm~2的倒装三结太阳能电池转换效率达到32%,输出功率提高了5%.采用1 MeV高能电子对倒装三结电池进行粒子辐照测试,电池各项性能参数随不同辐照剂量发生改变,在1×10~(15)/cm~2辐照总剂量下电池转换效率衰降比例达到15%.     

正负电子湮灭过程的核子激发态N*产生(英文)

目前,正负电子湮灭过程的核子激发态N*产生的实验数据主要来自于粲偶素能区。粲偶素衰变到核子激发态过程类似于其类时电磁形状因子测量过程,正反粲夸克短程湮灭提供了近乎于点源的胶子强子化过程。与γN,eN,πN反应互补,这一新的N*产生源具有同位旋和低自旋筛选的优势。综述了正负电子湮灭过程的核子激发态N*产生的实验情况和相关的唯象进展,同时讨论未来发展的一些新方向,如正负电子湮灭过程的核子激发态N*产物的一些新来源等。Up to now, the N* production from e+e- annihilations has been studied only around charmonium region. Charmonium decays to N*s are analogous to (time-like) EM form factors in that the charm quark annihilation provides a nearly pointlike (ggg) current. Complementary to other sources, such as πN, eN and γN reactions, this new source for N* spectroscopy has a few advantages, such as an isospin filter and a low spin filter. The experimental results on N* from e+e- annihilations and their phenomenological implications are reviewed. Possible new sources on N* production from e+e- annihilations are discussed.     

插入电荷控制层对蓝色OLED发光性能的提高

用蓝色有机荧光材料N⁶,N⁶,N¹²,N¹²-tetrap-tolylchrysene-6,12-diamine （DNCA）作为发光层,在发光层中间以及发光层与电子传输层之间插入2-methyl-9,10-di（2-napthyl）anthracene （MADN） 和9,10-di（2-naphthyl）anthracene （ADN） 作为电荷控制层,制备了结构为ITO/NPB（40 nm）/DNCA（15 nm）/MADN（3 nm）/DNCA（15 nm）/ADN（3 nm）/Bphen（30 nm）/LiF（0.8 nm）/Al（120 nm）的蓝色有机电致发光器件（OLED）。该器件的最大电流效率和最大亮度分别为5.6 cd/A和23 310 cd/m²。与传统的单发光层器件相比,最大电流效率和最大亮度分别提高了70%和87%。器件发光性能的提高可归结于两个电荷控制层在整个器件中的协同作用。第一电荷控制层MADN的作用主要是将发光层区域分成两个部分,从而扩大了激子在发光层中的复合区域;第二电荷控制层ADN可以有效地将空穴限制在发光层中,避免了激子在电子传输层中形成的无辐射跃迁从而提高了器件的发光性能。     

基于聚多巴胺/氧化锌复合阴极缓冲层的倒置聚合物太阳能电池的研究

利用多巴胺氧化自聚合形成聚多巴胺(PDA)与ZnO结合形成PDA/ZnO复合阴极缓冲层,制备了以P3HT:PC_(61)BM为活性层的倒置结构聚合物太阳能电池,通过改变PDA的自聚合时间来分析复合阴极缓冲层对器件性能的影响.实验发现,随着PDA的自聚合时间的增加,聚合物太阳能电池的光电转换效率先增大后减小,当自聚合时间为10 min时,相应器件光伏性能达到最优值,其开路电压V_(OC)为0.66 V,短路电流密度J_(SC)为9.70 mA/cm~2,填充因子FF为68.06%,光电转换效率PCE为4.35%.器件性能改善的原因是由于PDA/ZnO复合阴极缓冲层减小了ZnO与ITO之间的接触电阻,同时PDA中存在大量的氨基有利于倒置太阳能电池阴极对电子的收集.     

宏观放电参数对快原子态氮(N+,Nf)的影响

采用氮直流辉光放电等离子体中快电子和重粒子(N₂⁺,N⁺,N_f)混合的蒙特卡罗方法,模拟研究了快原子态粒子(N⁺,N_f)的产生率及轰击阴极的能量分布随宏观放电参数(P,V)的变化规律.结果表明,存在一最佳放电条件,使阴极壁处粒子(N⁺,N_f)的粒子数密度大且能量高;当电压大于800V时,轰击阴极的活性粒子(N⁺,N_f),主要由N₂⁺-N₂离解过程产生,电压小于300V时,主要由e^--N₂离解过程产生,模拟结果与实验结果相符合.     

In_2O_3:Sn中间层改善B掺杂ZnO薄膜的性能及其应用研究

金属有机化学气相沉积(MOCVD)法生长的掺硼氧化锌(BZO)薄膜,具有天然的"类金字塔"绒面结构,作为硅基薄膜太阳电池的前电极具有良好的陷光效果.但直接获得的BZO薄膜表面形貌过于尖锐,影响后续硅基薄膜材料生长质量及太阳电池的光电转换效率.本文设计了以一层超薄In2O3:Sn(ITO)薄膜(～4 nm厚度)作为中间层的多层膜,并通过对顶层BZO薄膜的厚度调制,改善BZO薄膜的表面特性,薄膜结构为:glass/底层BZO/ITO/顶层BZO.合适厚度的顶层BZO薄膜有助于获得类似"菜花状"形貌特征,尖锐的表面趋于"柔和",而较厚的顶层BZO薄膜仍然保持"类金字塔状"结构."柔和"的BZO薄膜表面结构有助于提高后续生长薄膜电池的结晶质量.将获得的新型"三明治"结构多层膜应用于p-i-n型氢化微晶硅(μc-Si:H)薄膜太阳电池,相比传统的BZO薄膜,电池的量子效率QE在500—800 nm波长范围提高了～10%,并且电池的Jsc和Voc均有所提高.     

The effect of nitrogen ion implantation on tungsten surfaces

X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) were used to study the phase, composition and chemical states of elements at the tungsten surface. The measurement results indicate that nitrogen-containing phase of tungsten were formed by nitrogen ion implantation (energy 40 keV, implantation doses of 4×10¹⁷, 8×10¹⁷ and 1.6×10¹⁸ ions/cm²). The formation of the W_x(O,N) and WN in the surface layer occurred as a result of nitrogen ion irradiation. A decrease in concentration of W_x(O,N) is observed with increasing N⁺ while that WN increases. Due to residual oxygen in the chamber WO₃ still exists at the surface of the specimen.     

锐钛矿相TiO2纳米管的制备及其染料敏化太阳电池

以商用金红石相TiO₂粉末为原料,通过在碱性溶液中150℃水热48h的方法合成TiO₂纳米管.采用SEM,TEM,XRD分析手段对TiO₂纳米管的形貌和结构演变进行了表征.制成的TiO₂纳米管与TritonX-100,乙酰丙酮混合后,通过丝网印刷的方法涂敷到ITO导电玻璃衬底上,并且在450℃下烧结30min后得到可应用于染料敏化太阳电池的多孔光阳极.将此光阳极浸泡于N719染料敏化后,与镀铂对电极组装电池,两者之间灌 关键词： 2纳米管')" href="#">TiO₂纳米管 染料敏化太阳电池 水热法     

IPTO薄膜制备及其在有机光电器件中的应用

新型IPTO(Pr Ti O3掺杂In2O3)薄膜的可见光透过率及导电性可与商业化的ITO薄膜媲美。采用双源电子束设备制备了一种新型的IPTO透明导电薄膜,通过开尔文探针法测试,其功函数为5.14 e V。为验证新型IPTO透明导电阳极对有机电致发光器件性能的影响,将IPTO替代商业化ITO作为阳极制备了有机电致发光器件。基于IPTO阳极的器件的亮度最大值为85 140 cd/m2,外量子效率最大值为3.16%,分别为以ITO为阳极的器件的3倍及1.13倍。这种性能的改善是由于IPTO具有较小的表面粗糙度及较高的功函数,可以降低阳极的注入势垒,有利于电荷向有机层注入,改善了器件内的空穴及电子的注入平衡。     

基于MoO_3/Au/MoO_3透明电极的有机太阳能电池

以透明导电薄膜Mo O3/Au/Mo O3代替铟锡氧化物(ITO)作为有机太阳能电池(OSCs)的阳极,研究了一系列结构为Mo O3/Au/Mo O3的透明电极和Mo O3(y nm)/Au(x nm)/Mo O3(y nm)/Cu Pc(25 nm)/C60(40nm)/BCP(8 nm)/Al(100 nm)的有机太阳能电池。研究表明,Mo O3/Au/Mo O3电极的光电特性可通过改变各层薄膜厚度加以调控,在Mo O3薄膜厚度为40 nm、Au薄膜厚度为10 nm时性能最优,且以该薄膜为电极的有机太阳能电池器件的性能接近于电极为ITO的有机太阳能电池器件。     

基于旋涂法和电子束蒸发法制备的V2O5/Ag/V2O5叠层透明导电薄膜

利用溶胶-凝胶技术与电子束蒸镀相结合的方法在常温下制备了叠层V₂O₅/Ag/V₂O₅（VAV）透明导电薄膜,研究了各层薄膜厚度对叠层结构光电特性的影响。用原子力显微镜、紫外-可见光分光光度计、四探针电阻仪及开尔文探针对样品的表面形貌、光电性能及功函数等性质进行了表征。实验结果表明,该薄膜具有良好的光学和电学性质,可见光（380~780 nm）平均透过率达75%,迁移率为16.89 cm²/（V·s）,载流子浓度为－1.043×10²² cm^-3,方块电阻值为15.1 Ω/□,功函数为5.17 eV。该制备方法降低了V₂O₅薄膜的工艺制备难度,为该材料在太阳能电池中的应用创造了良好的前期基础。