Macroporous Au materials prepared from colloidal crystals as templates

In this paper, we reported the preparation of macroporous Au materials using organic colloidal crystals as templates and their catalytic activity for electroless copper deposition. The poly(styrene-methyl methacrylate-acrylic acid) (P(St-MMA-AA)) copolymer colloids were deposited in an orderly manner onto the silicon surface, together with the infiltration of the Au nanoparticles into the interspaces of the colloids. The formed hybrid colloidal crystal subsequently was sintered at approximately 550 degrees C to remove the organic components fully to obtain a macroporous Au framework with three-dimensional ordered porous structure. The pore diameter was around 310 nm and almost monodisperse. It was demonstrated that the macroporous Au materials exhibit catalytic activity and can induce electroless copper deposition.     

正电性磁性氧化铁胶粒负载钯催化的Suzuki偶联反应

发展了一种超顺磁性Fe3O4纳米粒子负载Pd0的简易方法. 利用Fe3O4溶胶带正电荷的特性, 将负离子 通过静电作用吸附在Fe3O4胶体粒子表面( /Fe3O4), 以抗坏血酸(Vc)进一步还原即得到载有金属Pd团簇的Fe3O4胶体粒子(Pd0/Fe3O4). 该磁性载体负载的Pd催化剂对Suzuki反应表现出良好的催化活性, 且在反应后, 可方便地通过永久磁铁将催化剂从反应体系中分离出来, 进行循环使用. 试验表明, 该催化剂在循环使用五次后反应活性无明显下降. 进一步试验发现, 这种磁性纳米粒子负载的金属钯对一系列卤代芳烃的Suzuki偶联反应均表现出较优的催化活性.     

磁性纳米粒子负载钯催化有机合成反应研究进展

磁性纳米粒子负载钯催化的有机合成反应,由于具有催化活性高,催化剂在外加磁场作用下即可快速分离和重复使用等特点,已引起了人们的广泛关注.综述了近年来磁性纳米粒子负载钯催化有机合成反应的研究进展,载体包括Fe3O4纳米粒子、有机小分子修饰的磁性纳米粒子、SiO2包覆的磁性纳米粒子、碳修饰磁性纳米粒子、羟基磷灰石包覆的磁性纳米粒子和有机高分子修饰的磁性纳米粒子等.     

Magnetite nanorod thermotropic liquid crystal colloids: Synthesis, optics and theory

We have developed a facile method for preparing magnetic nanoparticles which couple strongly with a liquid crystal (LC) matrix, with the aim of preparing ferronematic liquid crystal colloids for use in magneto-optical devices. Magnetite nanoparticles were prepared by oxidising colloidal Fe(OH)(2) with air in aqueous media, and were then subject to alkaline hydrothermal treatment with 10moldm(-3) NaOH at 100°C, transforming them into a polydisperse set of domain magnetite nanorods with maximal length ～500nm and typical diameter ～20nm. The nanorods were coated with 4-n-octyloxybiphenyl-4-carboxylic acid (OBPh) and suspended in nematic liquid crystal E7. As compared to the conventional oleic acid coating, this coating stabilizes LC-magnetic nanorod suspensions. The suspension acts as a ferronematic system, using the colloidal particles as intermediaries to amplify magnetic field-LC director interactions. The effective Frederiks magnetic threshold field of the magnetite nanorod-liquid crystal composite is reduced by 20% as compared to the undoped liquid crystal. In contrast with some previous work in this field, the magneto-optical effects are reproducible on time scales of months. Prospects for magnetically switched liquid crystal devices using these materials are good, but a method is required to synthesize single magnetic domain nanorods.     

Sol–gel synthesis of porous inorganic materials using “core–shell” latex particles as templates

Here we report on the sol–gel synthesis of porous inorganic materials based on manganese, molybdenum, and tungsten compounds using the “core–shell” siloxane-acrylate latex as a template. The chemical composition and structural characteristics of the materials obtained have been investigated. It was shown that temperature conditions and gaseous media composition during the template destruction controlled the composition and structure of porous materials. To obtain porous inorganic materials for catalytic applications, the “core–shell” latex template was preliminarily functionalized by gold and palladium nanoparticles obtained by thermal reduction of noble metal ions-precursors in a polycarboxylic “shell”. Upon the template removal, noble metals nanoparticles of a size of dozens of nanometers were homogeneously distributed in the material porous structure. The evaluation of the catalytic activity of macroporous manganese, tungsten, and molybdenum oxides under the conditions of liquid phase catalytic oxidation of organic dyes has been performed. The prospects of employing macroporous oxide systems with immobilized nanoparticles of noble metals in the processes of hydrothermal oxidation of radionuclide organic complexes in radioactive waste decontamination have been demonstrated.     

Layer-by-layer assembly of TiO(2) colloids onto diatomite to build hierarchical porous materials

TiO(2) colloids with the most probably particle size of 10 nm were deposited on the surface of macroporous diatomite by a layer-by-layer (LBL) assembly method with using phytic acid as molecular binder. For preparation of colloidal TiO(2), titanium(IV) isopropoxide (Ti(C(3)H(7)O)(4)) was used as titanium precursor, nitric acid (HNO(3)) as peptizing agent and deionized water and isopropanol (C(3)H(7)OH) as solvent. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), N(2) adsorption-desorption, and UV-vis spectra are used to assess the morphology and physical chemistry properties of the resulting TiO(2) coated diatomite. It was shown that the mesoporosity has been introduced into macroporous diatomite by LBL deposition. The mesoporosity was originated from close-packing of the uniform TiO(2) nanoparticles. More TiO(2) could be coated on the surface of diatomite by increasing the deposition cycles. This hierarchical porous material has potential for applications in catalytic reactions involved diffusion limit, especially in photocatalytic reactions.     

磁性Fe_3O_4@PS@PAMAM-Ag复合催化粒子的制备及其可再生催化性能(英文)

采用聚苯乙烯(PS)包裹Fe3O4磁性纳米粒子,制得Fe3O4@PS复合微球,以此作为磁性载体,通过微球表面的羧基将聚酰胺-胺类树形大分子(PAMAM)连接到磁性载体上,然后使Ag纳米粒子镶嵌在树形分子层中,制得可再生的金属复合催化粒子Fe3O4@PS@PAMAM-Ag.并采用红外光谱、扫描电镜、电感耦合等离子体质谱(ICP-MS)和X射线光电子能谱等方法对复合催化粒子进行了表征,结果表明,树形分子可以较好地分散和稳定金属Ag纳米粒子,所制复合催化粒子表面Ag含量为1.64%,具有较高的催化还原对硝基苯酚的活性.同时,利用外加磁场可以方便快捷地从反应体系中分离出来,继续用于下一次反应中,复合催化粒子循环使用6次后,仍保持完全的催化性能.     

Stabilized rhodium(0) nanoparticles: a reusable hydrogenation catalyst for arene derivatives in a biphasic water-liquid system

A colloidal system based on an aqueous suspension of rhodium(o) nanoparticles proved to be an efficient catalyst for the hydrogenation of arene derivatives under biphasic conditions. The rhodium nanoparticles (2-2.5 nm) were synthesized by the reduction of RhCl3 x 3H2O with sodium borohydride and were stabilized by highly water-soluble N-alkyl-N-(2-hydroxyethyl)ammonium salts (HEA-Cn). These surfactant molecules were characterized by measurements of the surface tension and the aqueous dispersions with rhodium were observed by transmission electron cryomicroscopy. The catalytic system is efficient under ultramild conditions, namely room temperature and 1 atm H2 pressure. The aqueous phase which contains the protected rhodium(0) colloids can be reused without significant loss of activity. The microheterogeneous behavior of this catalytic system was confirmed on a mercury poisoning experiment.     

Size-dependent peroxidase-like catalytic activity of Fe3O4 nanoparticles

Peroxidase-like catalytic properties of Fe3O4 nanoparficles （NPs） with three different sizes, synthesized by chemical coprecipitation and sol-gel methods, were investigated by UV-vis spectrum analysis. By comparing Fe3O4 NPs with average diameters of 11, 20, and 150 nm, we found that the catalytic activity increases with the reduced nanoparticle size. The electrochemical method to characterize the catalytic activity of Fe3O4 NPs using the response currents of the reaction product and substrate was also developed.     

3-D ordered macroporous cuprous oxide: Fabrication, optical, and photoelectrochemical properties

Cuprous oxide 3-D ordered macroporous material was constructed by electrochemical deposition using a polystyrene colloidal crystal as template. The highly ordered macroporous structure with a hexagonal array can be extended over hundreds of square micrometers. The photonic stop bands of both the PS colloidal crystal and Cu2O 3DOM were found. Due to the highly ordered porous structure, the optical absorption and the charge carrier transportation are better in Cu2O 3DOM than in bulk Cu2O, which makes the reduction of oxygen faster on Cu2O 3DOM than on bulk Cu2O under visible light illumination. The higher photocurrent efficiency under visible light illumination makes the 3DOM Cu2O more suitable for solar applications.     

单源MOF衍生具有三维有序大孔结构的氮掺杂碳包覆铁-氮合金复合材料用于高效氧还原

氧还原反应在一些能源转换系统如金属-空气电池中起着至关重要的作用.目前贵金属基材料(Pt/C)被认为是最有效的氧还原电催化剂,然而价格昂贵和储量有限等因素限制了它的商业化应用,因此探索高效的非贵金属氧还原电催化剂具有重要的意义.近年来,负载过渡金属铁的多孔碳催化剂由于独特的结构和优异的氧还原催化活性成为替代铂基催化剂最有潜力的候选者.该类材料的合成通常采用直接煅烧含有氮源、碳源和铁盐的混合前驱体的制备方法,但是热解时材料的多孔结构以及活性位点的均匀分布很难得到有效的控制.近年来,金属有机框架(MOFs)由于其多孔结构和组成可控等优点而经常被用作自牺牲模板来制备负载铁基纳米材料的多孔碳催化剂,并表现出优异的电催化活性.目前以MOF为前驱体制备高活性的载铁氮掺杂碳复合材料通常需要引入额外的氮源或铁源,因此选择氮含量丰富的铁基MOF材料作为单源前驱体制备载铁氮掺杂多孔碳复合材料具有重要的意义.除此之外,具有多级孔隙率的催化剂可以改善反应时的传质过程,同时有序交联的网络结构能够提供连续的电子传输.本文报道了一种简单可控的制备具有三维有序大孔结构的载铁氮掺杂多孔碳复合催化剂的合成方法,该材料表现出优异的电催化氧气还原性能和优异的催化稳定性.首先,以氮含量丰富的双氰胺和吡嗪配体所构筑的Fe-MOF作为前驱体,利用具有均一尺寸的聚苯乙烯微球作为造孔剂,合成得到了具有三维有序大孔结构的Fe-MOF前驱体,然后通过高温煅烧该单源前驱体制备得到具有三维有序大孔结构的氮掺杂多孔碳包覆铁-氮合金的复合型催化剂(3DOM Fe/Fe-NA@NC).扫描电镜和透射电镜结果表明,材料内形成了有序交联的大孔结构;氮气吸附测试表明,刻蚀之后材料的比表面积明显增加,结合分级多孔特性可以共同促进催化反应的传质过程.粉末X射线衍射结果证实了多孔碳材料中铁和铁-氮合金物种的成功合成.电化学测试结果表明,在0.1 M KOH电解液中,3DOM Fe/Fe-NA@NC-800催化剂表现出优于Pt/C的氧还原活性,其半波电位(E_1/2)为0.88 V,大于商业Pt/C的半波电位(E_1/2=0.85 V).同时,3DOM Fe/Fe-NA@NC-800表现出更加优异的稳定性,经过20000 s测试后,其电流保持率为94%,而Pt/C只保持了78%.关于活性位点探究的对比实验证明在所制备的复合材料中,铁物种作为高效的活性位点参与了电催化氧还原反应,与氮掺杂多孔碳之间的协同作用共同主导了3DOM Fe/Fe-NA@NC优异的氧还原活性.得益于其优异的氧还原活性,将其作为阴极活性材料组装为锌-空气电池进一步探究了其在实际应用中的可行性.本结果拓宽了高效的铁基催化剂的类型,同时也为制备封装非贵金属的多孔碳基催化剂提供了实验指导和理论依据.     

The synthesis of mesoporous TiO2/SiO2/Fe2O3 hybrid particles containing micelle-induced macropores through an aerosol based process

Mesoporous SiO(2)/TiO(2)/Fe(2)O(3) particles containing macropores of about 50 nm in diameter have been prepared by an aerosol process using cetyltrimethylammonium bromide (CTAB) as a templating agent. In contrast to the traditional templating effect of CTAB to form ordered mesoporous silicas, the morphology here is vastly different due to the presence of precursor iron salts. The particles have mesoporosity templated by CTAB but additionally have large voids leading to a combined macroporous and mesoporous structure. The morphology is explained through the formation of colloidal structures containing species such as CTA(+)X(-1)Fe(3+) colloids in the aerosol droplets, indicating of a salt bridging effect. This dual porosity has applied implications, as the macropores provide easy entry to the particle interior in potentially diffusion limited situations. Furthermore, the particles encapsulate Fe(2)O(3) and contain TiO(2) leading to the dual functional properties of magnetic response and photocatalytic activity.     

三维有序大孔Al2O3制备的新方法及表征

以聚苯乙烯胶晶为模板,用Al(NO3)3•9H2O为前驱物,使用柠檬酸为配体,成功地制备了孔径为250～350 nm的三维有序大孔Al2O3材料.SEM观察表明,所得大孔材料孔结构规则排列,孔与孔之间通过小孔相连,形成了一个三维有序排列的蜂窝状结构.实验发现,以Al(NO3)3•9H2O为前驱物,加入柠檬酸可以防止团聚粒子的产生,有利于三维有序结构的形成.前驱物浓度在0.5～0.8 mol•L－1范围内均能得到较好的三维有序大孔结构.在1 100 ℃焙烧2 h后,Al2O3大孔材料仍能保持完整的规则孔结构特征,表现出较高的热稳定性.     

Structural effects of Fe3O4 nanocrystals on peroxidase-like activity

The catalytic activity of nanocrystal catalysts depends strongly on their structures. Herein, we report three distinct structures of Fe(3)O(4) nanocrystals, cluster spheres, octahedra, and triangular plates, prepared by a similar hydrothermal procedure. Additionally, the three Fe(3)O(4) nanostructures were used as peroxidase nanomimetics and the correlation between the catalytic activities and the structures was first explored by using 3,3',5,5'-tetramethylbenzidine and H(2)O(2) as peroxidase substrates. The results showed that the peroxidase-like activities of the Fe(3)O(4) nanocrystals were structure dependent and followed the order cluster spheres>triangular plates>octahedra; this order was closely related to their preferential exposure of catalytically active iron atoms or crystal planes. Such investigation is of great significance for peroxidase nanomimetics with enhanced activity and utilization.     

Preparation of surface plasmon resonance biosensor based on magnetic core/shell Fe3O4/SiO2 and Fe3O4/Ag/SiO2 nanoparticles

In this paper, surface plasmon resonance biosensors based on magnetic core/shell Fe(3)O(4)/SiO(2) and Fe(3)O(4)/Ag/SiO(2) nanoparticles were developed for immunoassay. With Fe(3)O(4) and Fe(3)O(4)/Ag nanoparticles being used as seeding materials, Fe(3)O(4)/SiO(2) and Fe(3)O(4)/Ag/SiO(2) nanoparticles were formed by hydrolysis of tetraethyl orthosilicate. The aldehyde group functionalized magnetic nanoparticles provide organic functionality for bioconjugation. The products were characterized by scanning electronic microscopy (SEM), transmission electronic microscopy (TEM), FTIR and UV-vis absorption spectrometry. The magnetic nanoparticles possess the unique superparamagnetism property, exceptional optical properties and good compatibilities, and could be used as immobilization matrix for goat anti-rabbit IgG. The magnetic nanoparticles can be easily immobilized on the surface of SPR biosensor chip by a magnetic pillar. The effects of Fe(3)O(4)/SiO(2) and Fe(3)O(4)/Ag/SiO(2) nanoparticles on the sensitivity of SPR biosensors were also investigated. As a result, the SPR biosensors based on Fe(3)O(4)/SiO(2) nanoparticles and Fe(3)O(4)/Ag/SiO(2) nanoparticles exhibit a response for rabbit IgG in the concentration range of 1.25-20.00 μg ml(-1) and 0.30-20.00 μg ml(-1), respectively.     

Photocatalytic synthesis of copper colloids from CuII by the ferrihydrite core of ferritin

The iron-storage protein ferritin encapsulates a nanoparticle of iron oxide. The size and properties of these nanoparticles can be adjusted by controlled oxidative hydrolysis reactions of Fe(II). This mineralized ferritin protein cage has previously been shown to act as an effective photocatalyst for reduction of Cr(VI). In the present work, we demonstrate that Fe(O)OH-mineralized ferritin catalyzes the photoreduction of Cu(II) to form a stable, air-sensitive, colloidal dispersion of Cu(0). In addition, the particle sizes of the Cu colloids can be controlled by varying the ratio of Cu(II) to ferritin. This illustrates an important principle, namely that the properties of one preformed material can be utilized for the specific synthesis of a second material, thus tailoring the desired physical properties of the final products. This procedure represents a multistep materials synthesis: the formation of a new nanomaterial from a catalytic precursor.     

Fe3O4@MCM-48–SO3H:合成苯并[f]色烯并[2,3-d]嘧啶酮的高效、可磁性分离纳米催化剂（英文）

Sulfonic acid groups were grafted onto three different types of synthesized magnetic nanoparticles, namely Fe3O4, Fe3O4@SiO2, and Fe3O4@MCM‐48. The sulfonic acid‐functionalized nanoparticles were evaluated as catalysts for the synthesis of 5‐aryl‐1H‐benzo[f]chromeno[2,3‐d]pyrimidine‐2,4(3H,5H)‐dione derivatives in terms of activity and recyclability. Their catalytic activities were compared with that of the homogeneous acid catalyst 1‐methylimidazolium hydrogen sulfate ([HMIm][HSO4]). The activity of Fe3O4@MCM‐48–SO3H was comparable to those of the other heter‐ogeneous and homogeneous catalysts.     

颗粒模板法制备大孔Al2O3材料

采用颗粒模板法制备了大孔氧化铝(Al2O3)材料. 扫描电子显微镜(SEM)结果显示, 大孔Al2O3结构中的大孔呈“囊泡状”且孔道的贯通性较差. Zeta电位测量表明, 共沉积条件下聚苯乙烯(PS)和Al2O3两种胶体颗粒带有相反的电荷, 在静电引力作用下先发生了吸附, 再沉积在一起. 吸附在PS微球表面的Al2O3纳米颗粒形成的吸附层是导致大孔呈“囊泡状”和孔道不贯通的主要原因. 采用聚二烯丙基二甲基氯化铵(PD)溶液对PS胶体微球带电性质进行了改性, PS微球的Zeta电位由−44.36 mV变成了+37.41 mV, 进而消除了沉积过程中二元颗粒间的吸附现象. 扫描电子显微镜显示, 大孔样品中“囊泡状”大孔消失, 同时孔道贯通性得到改善.     

Cesium carbonate supported on hydroxyapatite coated Ni0.5Zn0.5Fe2O4 magnetic nanoparticles as an effi cient and green catalyst for the synthesis of pyrano[2,3-c]pyrazoles

Cesium carbonate supported on hydroxyapatite coated Ni0.5Zn0.5Fe2O4 magnetic nanoparticles (Ni0.5Zn0.5Fe2O4@Hap-Cs2CO3) was found to be magnetically separable, highly efficient, green and recyclable heterogeneous catalyst. The synthesized nanocatalyst has been characterized with several methods (FT-IR, SEM, TEM, XRD and XRF) and these analyzes confirmed which the cesium carbonate is well supported to catalyst surface. After full characterization, its catalytic activity was investigated in the synthesis of pyranopyrazole derivatives and the reactions were carried out at room temperature in 50:50 water/ethanol with excellent yields (88-95%). More importantly, the Ni0.5Zn0.5Fe2O4@Hap-Cs2CO3 was easily separated from the reaction mixture by external magnetic field and efficiently reused at least six runs without any loss of its catalytic activity. Thus, the developed nanomagnetic base catalyst is potentially useful for the green and economic production of organic compounds.     

Synthesis of Fe3O4@SiO2-Ag magnetic nanocomposite based on small-sized and highly dispersed silver nanoparticles for catalytic reduction of 4-nitrophenol

We demonstrate a single-step facile approach for the synthesis of glycine (amino acid) passivated Fe(3)O(4) magnetic nanoparticles (GMNPs) using soft chemical route. The surface passivation of Fe(3)O(4) nanoparticles with glycine molecules was evident from infrared spectroscopy, thermal and elemental analyses, and light scattering measurements. These nanoparticles show better colloidal stability, good magnetization, excellent self-heating capacity under external AC magnetic field and cytocompatibility with cell lines. Further, the active functional groups (-NH(2)) present on the surface of Fe(3)O(4) nanoparticles can be accessible for routine conjugation of biomolecules/biolabelling through well-developed bioconjugation chemistry. Specifically, a new colloidal glycine passivated biocompatible Fe(3)O(4) nanoparticles with excellent specific absorption rate (SAR) have been fabricated, which can be used as an effective heating source for hyperthermia treatment of cancer (thermal therapy).