Towards new organometallic wires: tetraruthenium complexes bridged by phenylenevinylene and vinylpyridine ligands

The tetranuclear complexes [{(PiPr(3))(2)(CO)ClRu(mu-CH=CHpy)Ru Cl(CO)(PPh(3))(2)}(2)(mu-CH=CH-C(6)H(4)- CH=CH-1,4)] (3 a) and [{(PiPr(3))(2)(CO)ClRu(mu-CH=CHpy)RuCl(CO)(PPh(3))(2)}(2)(mu-CH=CH-C(6)H(4)-CH=CH-1,3)] (3b), which contain vinylpyridine ligands that connect peripheral Ru(PiPr(3))(2)(CO)Cl units to a central divinylphenylene-bridged diruthenium core, have been prepared and investigated. These complexes, in various oxidation states up to the tetracation level, have been characterized by standard electrochemical and spectroelectrochemical techniques, including IR, UV/Vis/NIR and ESR spectroscopy. A comparison with the results for the vinylpyridine-bridged dinuclear complex [PiPr(3))(2)(CO)ClRu(mu-CH=CHpy)RuCl(CO)(PPh(3))(2)(CH=CHPh)] (6) and the divinylphenylene-bridged complexes [{(EtOOCpy)(CO)Cl(PPh(3))(2)Ru}(2)(mu-CH=CH-C(6)H(4)-CH=CH-1,4)] (8a) and [{(EtOOCpy)(CO)Cl(PPh(3))(2)Ru}(2)(mu-CH=CH-C(6)H(4)-CH=CH-1,3)] (8b), which represent the outer sections (6) or the inner core (8a,b) of complexes 3a,b, and with the mononuclear complex [(EtOOCpy)(CO)(PPh(3))(2)RuCl(CH=CHPh)] (7) indicate that every accessible oxidation process is primarily centred on one of the vinyl ligands, with smaller contributions from the metal centres. The experimental results and quantum chemical calculations indicate charge- and spin-delocalization across the central divinylphenylenediruthenium part of 3a,b or the styrylruthenium unit of 6, but not beyond. The energy gap between the higher lying styryl- or divinylphenylenediruthenium-based and the lower occupied vinylpyridineruthenium-based orbitals increases in the order 6<3 b<3 a and thus follows the conjugation within the non-heteroatom-substituted aromatic vinyl ligand.     

Mononuclear and dinuclear palladium and nickel complexes of phosphinimine-based tridentate ligands

The tridentate bis-phosphinimine ligands O(1,2-C(6)H(4)N=PPh(3))(2)1, HN(1,2-C(2)H(4)N=PR(3))(2) (R = Ph 2, iPr 3), MeN(1,2-C(2)H(4)N=PPh(3))(2)4 and HN(1,2-C(6)H(4)N=PPh(3))(2)5 were prepared. Employing these ligands, monometallic Pd and Ni complexes O(1,2-C(6)H(4)N=PPh(3))(2)PdCl(2)6, RN(1,2-CH(2)CH(2)N=PPh(3))(2)PdCl][Cl] (R = H 7, Me 8), [HN(1,2-CH(2)CH(2)N=PiPr(3))(2)PdCl][Cl] 9, [MeN(1,2-CH(2)CH(2)N=PPh(3))(2)PdCl][PF(6)] 10, [HN(1,2-CH(2)CH(2)N=PPh(3))(2)NiCl(2)] 11, [HN(1,2-CH(2)CH(2)N=PR(3))(2)NiCl][X] (X = Cl, R = iPr 12, X = PF(6), R = Ph 13, iPr 14), and [HN(1,2-C(6)H(4)N=PPh(3))(2)Ni(MeCN)(2)][BF(4)]Cl 15 were prepared and characterized. While the ether-bis-phosphinimine ligand 1 acts in a bidentate fashion to Pd, the amine-bis-phosphinimine ligands 2-5 act in a tridentate fashion, yielding monometallic complexes of varying geometries. In contrast, initial reaction of the amine-bis-phosphinimine ligands with base followed by treatment with NiCl(2)(DME), afforded the amide-bridged bimetallic complexes N(1,2-CH(2)CH(2)N=PR(3))(2)Ni(2)Cl(3) (R = Ph 16, iPr 17) and N(1,2-C(6)H(4)N=PPh(3))(2)Ni(2)Cl(3)18. The precise nature of a number of these complexes were crystallographically characterized.     

Nucleophilic di- and tetrafluorination of dicarbonyl compounds

Reactions of various diketo compounds with Deoxofluor [(CH(3)OCH(2)CH(2))(2)NSF(3)] have been investigated. When reacted with Deoxofluor, alpha-diketones, R(1)COCOR(2) (R(1) = R(2) = Ph; R(1) = R(2) = 4-Me-C(6)H(4); R(1) = Ph, R(2) = Me; R(1) = Me, R(2) = Et) (1a-d) formed difluoro derivatives (2a-d) in the presence of a catalytic amount of HF and/or tetrafluoro (3a-d) products depending on the reaction conditions and stoichiometry used. Reactions of beta-diketones, R(3)COCH(2)COR(4) (R(3) = R(4) = Ph; R(3) = R(4) = Me; R(3) = Me, R(4) = Ph) (4e-g), with Deoxofluor in the presence of a catalytic amount of HF led to the formation of difluoroalkenones as a mixture of E (5e-g) and Z (6e-g) isomers in good yield. Reaction of other diones, R(5)CO-X-COR(6) (R(5) = R(6) = Ph, X = -CH=CH-; R(5) = R(6) = Me, X = -C(6)H(4)C(6)H(4)-; R(5) = R(6) = Ph, X = -CH(2)CH(2)CH(2)-; R(5) = R(6) = Me, X = -CH(2)CH(2)-) (7h-k) with Deoxofluor produced mainly difluoro products (8h-k) with low yields of tertrafluoro derivatives (9h-k). Acyclic alpha-keto amides react poorly to give the corresponding difluoro derivatives, whereas cyclic alpha-keto amides (10l-p) react smoothly under very mild conditions to produce the corresponding difluoro products (11l-p) in >88% isolated yield.     

A joined theoretical-experimental investigation on the 1H and 13C NMR signatures of defects in poly(vinyl chloride)

1H and 13C chemical shifts of PVC chains have been evaluated using quantum chemistry methods in order to evidence and interpret the NMR signatures of chains bearing unsaturated and branched defects. The geometrical structures of the stable conformers have been determined using molecular mechanics and the OPLS force field and then density functional theory with the B3LYP functional and the 6-311G(d) basis set. The nuclear shielding tensor has been calculated at the coupled-perturbed Kohn-Sham level (B3LYP exchange-correlation functional) using the 6-311+G(2d,p) basis set. The computational scheme accounts for the large number of stable conformers of the PVC chains, and average chemical shifts are evaluated using the Maxwell-Boltzmann distribution. Moreover, the chemical shifts are corrected for the inherent and rather systematic errors of the method of calculation by employing linear regression equations, which have been deduced from comparing experimental and theoretical results on small alkane model compounds containing Cl atoms and/or unsaturations. For each type of defect, PVC segments presenting different tacticities have been considered because it is known from linear PVC chains that the racemic (meso) dyads are characterized by larger (smaller) chemical shifts. NMR signatures of unsaturations in PVC chains have been highlighted for the internal -CH=CH- and -CH=CCl- units as well as for terminal unsaturations like the chloroallylic -CH=CH-CH2Cl group. In particular, the 13C chemical shifts of the two sp2 C atoms are very close for the chloroallylic end group. The CH2 and CHCl units surrounding an unsaturation present also specific 13C chemical shifts, which allow distinguishing them from the others. In the case of the proton, the CH2 unit of the -CHCl-CH2-CCl=CH- segment presents a larger chemical shift (2.6-2.7 ppm), while some CHCl units close to the -CH=CH- unsaturations appear at rather small chemical shifts (3.7 ppm). The -CH2Cl and -CHCl-CH2Cl branches also display specific signatures, which result in large part from modifications of the equilibrium conformations and their reduced number owing to the increased steric interactions. These branches lead to the appearance of 13C peaks at lower field associated either to the CH unit linking the -CH2Cl and -CHCl-CH2Cl branches (50 ppm) or to the CHCl unit of the ethyl branches (60 ppm). The corresponding protons resonate also at specific frequencies: 3.5-4.0 ppm for the -CH2Cl branch or 3.8-4.2 ppm for the terminal unit of the -CHCl-CH2Cl branch. Several of these signatures have been detected in the experimental 1H and 13C NMR spectra and are consistent with the reaction mechanisms.     

Synthesis of 1,2,3-tripnictolide anions by reaction of group 15 Zintl ions with acetylene. Isolation of [E3C2H2](-) (E = P, As) and preliminary reactivity studies

Dimethylformamide solutions of K(3)E(7) (E = P, As) react with acetylene yielding the 1,2,3-tripnictolide anions [E(3)C(2)H(2)](-) (R = P (1), As (2)). Preliminary studies have shown that 1 and 2 displace labile ligands in [Ru(COD){η(3)-CH(3)C(CH(2))(2)}(2)] (COD = 1,5-cyclooctadiene) to yield the novel complexes [Ru(η(5)-E(3)C(2)H(2)){CH(3)C(CH(2))(2)}(2)}](-) (E = P (3), As (4)).     

Expanding cavitand chemistry: the preparation and characterization of [n]cavitands with n>=4

The preparation of cavitands composed of 4, 5, 6, and 7 aromatic subunits ([n]cavitands, n=4-7) is described. The simple, two-step synthetic procedure utilized readily available starting materials (2-methylresorcinol and diethoxymethane). The two cavitand products having 4 and 5 aromatic subunits exhibited highly symmetric cone conformations, while the larger cavitands (n = 6 and 7) adopt conformations of lower symmetry. 1H NMR spectroscopic studies of [6]cavitand and [7]cavitand revealed that these hosts undergo exchange between equivalent conformations at room temperature. The departure of these two cavitands from cone conformations is related to steric crowding on their Ar-O-CH2-OAr bridges and is predicted by simple molecular mechanics calculations (MM2 force field). X-ray diffraction studies on single crystals of the [4]cavitand, [5]cavitand, and [6]cavitand hosts afforded additional experimental support for these conclusions.     

Syntheses of 1-alkyl-1,2,4-triazoles and the formation of quaternary 1-alkyl-4-polyfluoroalkyl-1,2,4-triazolium salts leading to ionic liquids

1,2,4-triazole was alkylated (alkyl = methyl, butyl, heptyl, decyl) at N-1 in >90% isolated yields. The resulting 1-alkyl triazoles were quaternized at N-4 in >98% isolated yields using fluorinated alkyl halides with >98% isolated yields, under neat reaction conditions at 100-120 degrees C to form N1-CH(3)-N4-(CH(2))(2)C(m)F(2)(m)(+ 1)-triazolium (Taz) iodide (m = 1, 6), N1-C(4)H(9)-N4-(CH(2))(2)C(m)F(2)(m)(+ 1)-Taz iodide (m = 1, 4, 6), N1-C(7)H(15)-N4-(CH(2))(2)C(m)F(2)(m)(+ 1)-Taz iodide (m = 1, 4, 6), N1-C(10)H(21)-N4-(CH(2))(2)C(m)F(2)(m)(+1)-Taz iodide (m = 1, 4), and N1-C(n)H(2)(n )(+ 1)-N4-(CH(2))(2)F-Taz bromide (n = 4, 7, 10). Single-crystal X-ray analyses confirmed the structure of [1-CH(3)-4-CH(2)CH(2)CF(3)-Taz](+)I(-). It crystallized in the orthorhombic space group Pccn, and the unit cell dimensions were a = 13.8289(9) A, b = 17.3603(11) A, c = 9.0587(6) A (alpha = beta = gamma = 90 degrees ). Metathesis of these polyfluoroalkyl-substituted triazolium halides with other salts led to the formation of quaternary compounds, some of which comprise ionic liquids, namely, [R(R(f))-Taz](+)Y(-) (Y = NTf(2), BF(4), PF(6), and OTf), in good isolated yields without the need for further purification: N1-CH(3)-N4-(CH(2))(2)C(m)F(2)(m)( +) (1)-Taz Y (m = 1, 6; Y = NTf(2)), N1-C(4)H(9)-N4-(CH(2))(2)C(m)F(2)(m)(+ 1)-Taz Y (m = 1, 4, 6; Y = NTf(2)), N1- C(7)H(15)-N4-(CH(2))(2)C(m)F(2)(m)(+ 1)-Taz Y (m = 1, 4, 6; Y = NTf(2)), N1-C(10)H(21)-N4-(CH(2))(2)C(m)F(2)(m)(+1)-Taz Y (n = 1, 4; Y = NTf(2)), N1-C(n)H(2)(n )(+ 1)-N4-(CH(2))(2)F-Taz Y (n = 7, 10; Y = NTf(2)), N1-C(10)H(21)-N4-(CH(2))(2)F-TazY (Y = OTf), N1-C(7)H(15)-N4-(CH(2))(2)F-TazY (Y = BF(4)), N1-C(4)H(9)-N4-(CH(2))(2)C(m)F(2)(m) (+ 1)-Taz Y (m = 4, 6; Y = PF(6)), N1-C(7)H(15)-N4-(CH(2))(2)C(4)F(9)-Taz Y (Y = PF(6)), N1-C(4)H(9)-N4-(CH(2))(2)C(m)F(2)(m)(+ 1)-Taz Y (m = 4, 6; Y = OTf). All new compounds were characterized by (1)H, (19)F, and (13)C NMR and MS spectra and elemental analyses. T(g)s and T(m)s of ionic liquids were determined by DSC.     

Oligomerization and regioselective hydrosilylation of styrenes catalyzed by cationic allyl nickel complexes bearing allylphosphine ligands

The complexes [Ni(eta(3)-CH(2)CHCH(2))Br(kappa(1)P-PR(2)CH(2)CH=CH(2))] (R = Ph 1, (i)Pr2 ) and [Ni(eta(3)-CH(2)C(R')CH(2))(kappa(1)P-PR(2)CH(2)CH=CH(2))(2)][BAr'(4)] (R' = H, R = Ph 4a, R = (i)Pr 4b; R' = CH(3), R = Ph 5a, R = (i)Pr 5b; Ar' = 3,5-C(6)H(3)(CF(3))(2)) have been prepared and characterized. The X-ray crystal structures of 1, 2 and 5b have been determined. 4a-b and 5a-b are catalyst precursors for the oligomerization of RC(6)H(4)CH=CH(2) to oligostyrene (R = H) or oligo(4-methylstyrene) (R = CH(3)) respectively, without the need of a co-catalyst such as methylalumoxane. The catalytic activities range from moderate to high. The oligomerization reactions are carried out in the temperature interval 25-40 degrees C in 1,2-dichloroethane, using an olefin/catalyst ratio equal to 200, yielding oligostyrenes with a high isotactic fraction content P(m), with M(n) in the range 700-1900 Dalton, and polydispersities between 1.22 and 1.64. The cationic complexes 4a-b and 5a-b are also effective catalyst precursors for the hydrosilylation reactions of styrene or 4-methylstyrene with PhSiH(3) in 1,2-dichloroethane at 40 degrees C using an olefin/catalyst ratio equal to 100, leading selectively to RC(6)H(4)CH(SiH(2)Ph)CH(3) (R = H, CH(3)) in 50-79% yield.     

A spectroelectrochemical study of the reduction of a Schiff base cryptand

The electrochemical reduction of a bicyclic hexaimino Schiff base cryptand 1 (N[(CH2)2N-CH-meta-C6H4-CH=N(CH2)2]3N) and that of one of its strands 2 ((CH3)2CH-N=CH-meta-C6H4-CH=N-CH(CH3)2) has been studied by visible and near infrared in-situ spectroelectrochemical techniques. These results are in good agreement with those obtained using alkali metals, but in this case the effect of the formation of ion pairs is minimized through the use of tetrabutylammonium cations. It is confirmed that 1- and 1= have the same visible and near IR spectrum. The spectrum of the products of the electrochemical reduction of 2 is similar to those of 1- or 1=.     

Why are proton transfers at carbon slow? Self-exchange reactions

When the quantum character of proton transfer is taken into account, the intrinsic slowness of self-exchange proton transfer at carbon appears as a result of its nonadiabatic character as opposed to the adiabatic character of proton transfer at oxygen and nitrogen. This difference is caused by the lesser polarity of C-H bonds as compared to that of O-H and N-H bonds. Besides solvent and heavy-atom intramolecular reorganizations, the kinetics of the reaction are consequently governed at the level of a pre-exponential term by proton tunneling through the barrier. These contrasting behaviors are illustrated by an analysis of the CH(3)H + (-)CH(3), H(2)O + OH(-), and (+)NH(4) + NH(3) self-exchange reactions. The effect of electron-withdrawing substituents and the case of cation radicals are discussed within the same framework taking the O(2)NCH(2)H + CH(2)=NO(2)(-) and (+.)H(2)NCH(2)H + (.)CH(2)NH(2) as examples. Illustrated by the CH(2)=CH-CH(2)H + (-)CH(2)-CH=CH(2) couple, it is shown that the "imbalanced character of the transition state" is related to heavy-atom intramolecular reorganization. Combination of these various effects is finally analyzed, taking the O(2)N-CH(2)=CH-CH(2)H + CH(2)=CH-CH=NO(2)(-) and (+.)H(2)N-CH(2)=CH-CH(2)H + (.)CH(2)-CH=CH(2)-NH(2) couples as examples.     

Thermodynamically controlled synthesis of a chiral tetra-cavitand nanocapsule and mechanism of enantiomerization

The dynamic covalent synthesis, structure and conformational dynamics of a chiral polyimine nanocapsule 1a are reported. Reaction of four tetraformyl cavitands and eight H(2)N(CH(2))(2)NH(2) yields quantitatively 1a, which has a compact, asymmetrically folded, pseudo-C(2)-symmetric structure, as determined by X-ray crystallography, and encapsulates four CHCl(3) and three CH(3)OH guests in the solid state. In solution, 1a enantiomerizes by passing over a barrier of ΔG(298)(double dagger) = 21.5 ± 0.7 kcal mol(-1) via a refolding process.     

Reactivity of Mo(PMe3)6 towards benzothiophene and selenophenes: new pathways relevant to hydrodesulfurization

Mo(PMe(3))(6) cleaves a C-S bond of benzothiophene to give (kappa(2)-CHCHC(6)H(4)S)Mo(PMe(3))(4), which rapidly isomerizes to the olefin-thiophenolate and 1-metallacyclopropene-thiophenolate complexes, (kappa(1),eta(2)-CH(2)CHC(6)H(4)S)Mo(PMe(3))(3)(eta(2)-CH(2)PMe(2)) and (kappa(1),eta(2)-CH(2)CC(6)H(4)S)Mo(PMe(3))(4). The latter two molecules result from a series of hydrogen transfers and are differentiated according to whether the termini of the organic fragments coordinate as olefin or eta(2)-vinyl ligands, respectively. The reactions between Mo(PMe(3))(6) and selenophenes proceed differently from those of the corresponding thiophenes. For example, whereas Mo(PMe(3))(6) reacts with thiophene to give eta(5)-thiophene and butadiene-thiolate complexes, (eta(5)-C(4)H(4)S)Mo(PMe(3))(3) and (eta(5)-C(4)H(5)S)Mo(PMe(3))(2)(eta(2)-CH(2)PMe(2)), selenophene affords the metallacyclopentadiene complex [(kappa(2)-C(4)H(4))Mo(PMe(3))(3)(Se)](2)[Mo(PMe(3))(4)] in which the selenium has been completely abstracted from the selenophene moiety. Likewise, in addition to (kappa(1),eta(2)-CH(2)CC(6)H(4)Se)Mo(PMe(3))(4) and (kappa(1),eta(2)-CH(2)CHC(6)H(4)Se)Mo(PMe(3))(3)(eta(2)-CH(2)PMe(2)), which are counterparts of the species observed in the benzothiophene reaction, the reaction of Mo(PMe(3))(6) with benzoselenophene yields products resulting from C-C coupling, namely [kappa(2),eta(4)-Se(C(6)H(4))(CH)(4)(C(6)H(4))Se]Mo(PMe(3))(2) and [mu-Se(C(6)H(4))(CH)C(CH)(2)(C(6)H(4))](mu-Se)[Mo(PMe(3))(2)][Mo(PMe(3))(2)H].     

Syntheses, structures, and reactivities of homometallic rare-earth-metal multimethyl methylidene and oxo complexes

Unsolvated, trinuclear, homometallic, rare-earth-metal multimethyl methylidene complexes [{(NCN)Ln(μ(2)-CH(3))}(3)(μ(3)-CH(3))(μ(3)-CH(2))] (NCN = L = [PhC{NC(6)H(4)(iPr-2,6)(2)}(2)](-); Ln = Sc (2a), Lu (2b)) have been synthesized by treatment of [(L)Ln{CH(2)C(6)H(4)N(CH(3))(2)-o}(2)] (Ln = Sc (1a), Lu (1b)) with two equivalents of AlMe(3) in toluene at ambient temperature in good yields. Treatment of 1 with three equivalents of AlMe(3) gives the heterometallic trinuclear complexes [(L)Ln(AlMe(4))(2)] (Ln = Sc (3a), Lu (3b)) in good yields. Interestingly, 2 can also be generated by recrystallization of 3 in THF/toluene, thereby indicating that the THF molecule can also induce C-H bond activation of 2. Reaction of 2 with one equivalent of ketones affords the trinuclear homometallic oxo-trimethyl complexes [{(L)Ln(μ(2) -CH(3))}(3) (μ(3)-CH(3))(μ(3)-O)] (Ln = Sc(4a), Lu(4b)) in high yields. Complex 4b reacts with one equivalent of cyclohexanone to give the methyl abstraction product [{(L)Lu(μ(2) -CH(3) )}(3) (μ(3) -OC(6)H(9))(μ(3)-O)] (5b), whereas reaction of 4b with acetophenone forms the insertion product [{(L)Lu(μ(2)-CH(3))}(3){μ(3)-OCPh(CH(3))(2)}(μ(3)-O)] (6b). Complex 4a is inert to ketone under the same conditions. All these new complexes have been characterized by elemental analysis, NMR spectroscopy, and confirmed by X-ray diffraction determination.     

Building blocks for coordination polymers: self-assembled cleft-like and planar discrete metallo-macrocyclic complexes

Discrete dinuclear metallo-macrocyclic complexes have been prepared from the flexible amide ligand N-6-[(3-pyridylmethylamino)carbonyl]pyridine-2-carboxylic acid (L1-CH(3)), and its more rigid analogue, N-6-[(3-pyridylamino)carbonyl]pyridine-2-carboxylic acid (L3-CH(3)). With ligands L1-CH(3) and L3-CH(3), discrete dinuclear metallo-macrocyclic complexes with the generic formula [Cu(2)(L1-CH(3))(2)(X)(2)(Y)(2)] (7, X = NO(3); 8, X = Cl, Y = H(2)O; 9, X = ClO(4), Y = CH(3)OH) and [Cu(2)(L3-CH(3))(2)(X)(2)(Y)(2)] (10, X = NO(3), Y = H(2)O; 11, X = ClO(4), Y = CH(3)OH) are obtained. For complexes 7-9, containing the more flexible link L1-CH(3), these complexes are cleft-shaped and hinged at the methylene spacer, which allows the cleft to widen and contract to accommodate different packing modes in the solid-state. In contrast, the rigid link L3-CH(3) gives near planar metallo-macrocyclic structures. These metallo-macrocyclic compounds may be useful building blocks for coordination polymers.     

Zirconium complexes incorporated with asymmetrical tridentate pincer type mono- and di-anionic pyrrolyl ligands: mechanism and reactivity as catalytic precursors

The reactions of Zr(NR(2))(4) (1, R = Me; 2, R = Et) with an asymmetrical tridentate pincer type pyrrole ligand precursor [C(4)H(2)NH(2-CH(2)NH(t)Bu)(5-CH(2)NMe(2))] and treatment of the derivatives with either PhNCS or PhNCO have been carried out and characterized. Reacting Zr(NR(2))(4) (1, R = Me; 2, R = Et) with [C(4)H(2)NH(2-CH(2)NH(t)Bu)(5-CH(2)NMe(2))] generates Zr[C(4)H(2)N(2-CH(2)N(t)Bu)(5-CH(2)NMe(2))](NR(2))(2) (3, R = Me; 4, R = Et) in high yield along with the elimination of 2 equiv of dimethylamine or diethylamine, respectively. Interestingly, while changing the solvent from Et(2)O to CH(2)Cl(2), the complex Zr[C(4)H(2)N(2-CH(2)N(t)Bu)(5-CH(2)NMe(2))][C(4)H(2)N(2-CH(2)NH(t)Bu)(5-CH(2)NMe(2))]Cl (5) is produced by undergoing C-Cl bond cleavage. Furthermore, reaction of either 3 or 4 with 1 or 2 equiv of PhNCS or PhNCO yields Zr[C(4)H(2)N(2-CH(2)N(t)Bu)(5-CH(2)NMe(2))](NMe(2))[PhNC(NMe(2))S] (6), Zr[C(4)H(2)N(2-CH(2)N(t)Bu)(5-CH(2)NMe(2))](NEt(2))[PhNC(NEt(2))O] (7) and Zr[C(4)H(2)N(2-CH(2)NH(t)Bu)(5-CH(2)NMe(2))][PhNC(NEt(2))O](3) (8), respectively. All the aforementioned complexes were characterized by (1)H and (13)C NMR spectrometry and the molecular structures of 5, 6, and 8 have been determined by single-crystal X-ray diffractometry. Complexes 4, 5, and 7 initiated the ethylene polymerization in the presence of MAO as the co-catalyst.     

Structures that should be Described in Higher-Symmetry, Centrosymmetric Space Groups. Part 2. The Structures of [Ni(C_5H_4NO-2-CH=N-CH_2CH_2-N=CH-2-C_5H_4NO)(H_2O)_2]- (ClO_4)_2, {Ni[C_5H_4NO-2-CH=N-CH(CH_3)CH_2-N=CH-2- C_5H_4NO](H_2O)_2}

1　ＩＮＴＲＯＤＵＣＴＩＯＮＳｅｖｅｒａｌｉｎｃｏｒｒｅｃｔｓｐａｃｅｇｒｏｕｐｓｈａｖｅｂｅｅｎｒｅ ａｓｓｉｇｎｅｄｂｙｍａｋｉｎｇｕｓｅｏｆｓｉｍｕｌａｔｅｄｓｔｒｕｃｔｕｒｅｆａｃｔｏｒｓ;ｈｏｗｅｖｅｒ,ｔｈｅｃｒｕｘｏｆｔｈｉｓｏｒａｎｙｓｐａｃｅｇｒｏｕｐｒｅｖｉｓｉｏｎｉｓｔｈｅａｃｃｕｒａｔｅｒｅｐｏｒｔｉｎｇｏｆｔｈｅｓｐａｃｅｇｒｏｕｐａｎｄａｔｏｍｉｃｃｏｏｒｄｉｎａｔｅｓｏｆｔｈｅｉｎｃｏｒｒｅｃｔｌｙｄｅｔｅｒｍｉｎｅｄｓｔｒｕｃｔｕｒｅｓｉｎｃｅｔｈｅｔｒｕｅｓｔｒｕｃ…     

Biaryl formation in the synthesis of endo and exo-platinacycles

The reactions of cis-[Pt(2)(4-MeC(6)H(4))(4)(μ-SEt(2))(2)] with bifunctional ligands ArCH=NCH(2)(2-XC(6)H(4)) containing a C-X bond at the ortho positions of the benzyl ring (Ar = 4-ClC(6)H(4), X = Br (1d); Ar = 2,4,6-(CH(3))(3)C(6)H(2), X = Br (1e); Ar = 2,4,6-(CH(3))(3)C(6)H(2), X = Cl (1f); Ar = 2-CH(3)C(6)H(4), X = Br (1h); Ar = 2,6-F(2)C(6)H(3), X = Br (1i)) in refluxing toluene were studied. Several types of platinum(II) cyclometallated compounds containing a biaryl linkage were obtained: i) endo-five-membered with a Pt-C(sp(2)) bond (2d, 2h), ii) endo-six-membered with a Pt-C(sp(3)) bond (2e, 2f), and iii) exo-five membered with a Pt-C(sp(2)) bond (2i). The formed biaryl linkage involves the metallated ring for 2i and the non-metallated ring for the endo-metallacycles. The reaction of compounds 2 with PPh(3) produced the corresponding phosphine derivatives, some of which (3d, 3e, 3h and 3i) were characterised crystallographically. In addition, compound [PtBr{2-CH(3)C(6)H(3)C(6)H(4)CH=NCH(2)(2-C(6)H(4)Br)}SEt(2)] (2c) containing a seven-membered endo-metallacycle was also obtained and characterised crystallographically.     

Acetylide-bridged organometallic oligomers via the photochemical metathesis of methyl-iron(II) complexes

The acetylido methyl iron(II) complexes, cis/trans-[Fe(dmpe)(2)(C[triple bond]CR)(CH(3))] (1) and trans-[Fe(depe)(2)(C[triple bond]CR)(CH(3))] (2) (dmpe = 1,2-dimethylphoshinoethane; depe = 1,2-diethylphosphinoethane), were synthesized by transmetalation from the corresponding alkyl halide complexes. Acetylido methyl iron(II) complexes were also formed by transmetalation from the chloride complexes, trans-[Fe(dmpe)(2)(C[triple bond]CR)(Cl)] or trans-[Fe(depe)(2)(C[triple bond]CR)(Cl)]. The structure of trans-[Fe(dmpe)(2)(C[triple bond]CC(6)H(5))(CH(3))] (1a) was determined by single-crystal X-ray diffraction. The methyl acetylido iron complexes, [Fe(dmpe)(2)(C[triple bond]CR)(CH(3))] (1), are thermally stable in the presence of acetylenes; however, under UV irradiation, methane is lost with the formation of a metal bisacetylide. Photochemical metathesis of cis- or trans-[Fe(dmpe)(2)(CH(3))(C[triple bond]CR)] (R = C(6)H(5) (1a), 4-C(6)H(4)OCH(3) (1b)) with terminal acetylenes was used to selectively synthesize unsymmetrically substituted iron(II) bisacetylide complexes of the type trans-[Fe(dmpe)(2)(C[triple bond]CR)(C[triple bond]CR')] [R = Ph, R' = Ph (6a), 4-CH(3)OC(6)H(4) (6b), (t)()Bu (6c), Si(CH(3))(3) (6d), (CH(2))(4)C[triple bond]CH (6e); R = 4-CH(3)OC(6)H(4), R' = 4-CH(3)OC(6)H(4), (6g), (t)()Bu (6h), (CH(2))(4)C[triple bond]CH (6i), adamantyl (6j)]. The structure of the unsymmetrical iron(II) bisacetylide complex trans-[Fe(dmpe)(2)(C[triple bond]CC(6)H(5))(C[triple bond]CC(6)H(4)OCH(3))] (6b) was determined by single-crystal X-ray diffraction. The photochemical metathesis of the bis-acetylene, 1,7-octadiyne, with trans-[Fe(dmpe)(2)(CH(3))(C[triple bond]CPh)] (1a), was utilized to synthesize the bridged binuclear species trans,trans-[(C(6)H(5)C[triple bond]C)Fe(dmpe)(2)(mu-C[triple bond]C(CH(2))(4)C[triple bond]C)Fe(dmpe)(2)(C[triple bond]CC(6)H(5))] (11). The trinuclear species trans,trans,trans-[(C(6)H(5)C[triple bond]C)Fe(dmpe)(2)(mu-C[triple bond]C(CH(2))(4)C[triple bond]C)Fe(dmpe)(2)(mu-C[triple bond]C(CH(2))(4)C[triple bond]C)Fe(dmpe)(2)(C[triple bond]CC(6)H(5))] (12) was synthesized by the photochemical reaction of Fe(dmpe)(2)(C[triple bond]CPh)(C[triple bond]C(CH(2))(4)C[triple bond]CH) (6e) with Fe(dmpe)(2)(CH(3))(2). Extended irradiation of the bisacetylide complexes with phenylacetylene resulted in insertion of the terminal alkyne into one of the metal acetylide bonds to give acetylide butenyne complexes. The structure of the acetylide butenyne complex, trans-[Fe(dmpe)(2)(C[triple bond]CC(6)H(4)OCH(3))(eta(1)-C(C(6)H(5))=CH(C[triple bond]CC(6)H(4)OCH(3)))] (9a) was determined by single-crystal X-ray diffraction.     

Enantiomerically pure phosphaalkene-oxazolines (PhAk-Ox): synthesis, scope and copolymerization with styrene

The design of a synthetic route to a class of enantiomerically pure phosphaalkene-oxazolines (PhAk-Ox) is presented. The condensation of a lithium silylphosphide and a ketone (the phospha-Peterson reaction) was used as the P=C bond-forming step. Attempted condensation of PhC(=O)Ox (Ox = CNOCH(iPr)CH(2)) and MesP(SiMe(3))Li gave the unusual heterocycle (MesP)(2)C(Ph)=CN-(S)-CH(iPr)CH(2)O (3). However, PhAk-Ox (S,E)-MesP=C(Ph)CMe(2)Ox (1?a) was successfully prepared by treating MesP(SiMe(3))Li with PhC(=O)CMe(2)Ox (52?%). To demonstrate the modularity and tunability of the phospha-Peterson synthesis several other phosphaalkene-oxazolines were prepared in an analogous manner to 1?a: TripP=C(Ph)CMe(2)Ox (1?b; Trip = 2,4,6-triisopropylphenyl), 2-iPrC(6)H(4)P=C(Ph)CMe(2)Ox (1?c), 2-tBuC(6)H(4)P=C(Ph)CMe(2)Ox (1?d), MesP=C(4-MeOC(6)H(4))CMe(2)Ox (1?e), MesP=C(Ph)C(CH(2))(4)Ox (1?f), and MesP=C(3,5-(CF(3))(2)C(6)H(3))C(CH(2))(4)Ox (1?g). To evaluate the PhAk-Ox compounds as prospective precursors to chiral phosphine polymers, monomer 1?a and styrene were subjected to radical-initiated copolymerization conditions to afford [{MesPC(Ph)(CMe(2)Ox)}(x){CH(2)CHPh}(y)](n) (9?a: x = 0.13n, y = 0.87n; GPC: M(w) = 7400?g mol(-1) , PDI = 1.15).     

Self-assembled organic monolayers terminated in perfluoroalkyl pentafluoro-lambda(6)-sulfanyl (-SF5) chemistry on gold

Recently synthesized (Winter, R.; Nixon, P. G.; Gard, G. L.; Radford, D. H.; Holcomb, N. R.; Grainger, D. W. J. Fluorine Chem. 2001, 107, 23-30) SF5-terminated perfluoroalkyl thiols (SF5(CF2)nCH2CH2SH, where n = 2, 4, and 6) and a symmetric SF5-terminated dialkyl disulfide ([SF5-CH=CH-(CH2)8-S-]2) were assembled as thin films chemisorbed onto gold surfaces. The adsorbed monolayer films of these SF5-containing molecules on polycrystalline gold were compared using ellipsometry, contact angle, X-ray photoelectron spectroscopy (XPS), time-of-flight secondary ion mass spectrometry (ToF-SIMS), and infrared spectroscopy (FTIR) surface analytical methods. The resulting SF5-dialkyl disulfide monolayer film shows moderate angle dependence in depth-dependent XPS analysis, suggesting a preferentially oriented film. The SF5-terminated perfluoroalkyl thiols exhibit angular-dependent XPS compositional variance depending on perfluoroalkyl chain length, consistent with improved film assembly (increasingly hydrophobic, fewer defects, and more vertical chain orientation increasing film thickness) with increasing chain length. Tof-SIMS measurements indicate that both full parent ions for these film-forming molecules and the unique SF5 terminal group are readily detectable from the thin films without substantial contamination from other adsorbates.