2‐[2‐(Pyrrolidin‐2‐yl)propan‐2‐yl]‐1H‐pyrrole and its amide derivative 1‐{2‐[2‐(1H‐pyrrol‐2‐yl)propan‐2‐yl]pyrrolidin‐1‐yl}ethanone

In the title compounds, C₁₁H₁₈N₂, (II), and C₁₃H₂₀N₂O, (III), the pyrrolidine rings have twist conformations. Compound (II) crystallizes with two independent molecules (A and B) in the asymmetric unit. The mean planes of the pyrrole and pyrrolidine rings are inclined to one another by 89.99 (11) and 89.35 (10)° in molecules A and B, respectively. In (III), the amide derivative of (II), the same dihedral angle is much smaller, at only 13.42 (10)°. In the crystal structure of (II), the individual molecules are linked via N—H...N hydrogen bonds to form inversion dimers, each with an R²₂(12) graph‐set motif. In the crystal structure of (III), the molecules are linked via N—H...O hydrogen bonds to form inversion dimers with an R²₂(16) graph‐set motif.     

Supramolecular aggregation in three 4‐aryl‐6‐(1H‐indol‐3‐yl)‐3‐methyl‐1‐phenyl‐1H‐pyrazolo[3,4‐b]pyridine‐5‐carbonitriles

Both 6‐(1H‐indol‐3‐yl)‐3‐methyl‐4‐(4‐methylphenyl)‐1‐phenyl‐1H‐pyrazolo[3,4‐b]pyridine‐5‐carbonitrile and 6‐(1H‐indol‐3‐yl)‐3‐methyl‐4‐(4‐methoxyphenyl)‐1‐phenyl‐1H‐pyrazolo[3,4‐b]pyridine‐5‐carbonitrile crystallize from dimethylformamide solutions as stoichiometric 1:1 solvates, viz. C₂₉H₂₁N₅·C₃H₇NO, (I), and C₂₉H₂₁N₅O·C₃H₇NO, (II), respectively; however, 6‐(1H‐indol‐3‐yl)‐3‐methyl‐1‐phenyl‐4‐(3,4,5‐trimethoxyphenyl)‐1H‐pyrazolo[3,4‐b]pyridine‐5‐carbonitrile, C₃₁H₂₅N₅O₃, (III), crystallizes in the unsolvated form. The heterocyclic components of (I) are linked by C—H...π(arene) hydrogen bonds to form cyclic centrosymmetric dimers, from which the solvent molecules are pendent, linked by N—H...O hydrogen bonds. In (II), the heterocyclic components are linked by a combination of C—H...N and C—H...π(arene) hydrogen bonds into chains containing two types of centrosymmetric ring, and the pendent solvent molecules are linked to these chains by N—H...O hydrogen bonds. Molecules of (III) are linked into simple C(12) chains by an N—H...O hydrogen bond, and these chains are weakly linked into pairs by an aromatic π–π stacking interaction.     

Green chemistry synthesis: 2‐amino‐3‐[(E)‐(2‐pyridyl)methylideneamino]but‐2‐enedinitrile monohydrate and 5‐cyano‐2‐(2‐pyridyl)‐1‐(2‐pyridylmethyl)‐1H‐imidazole‐4‐carboxamide

The title compounds, C₁₀H₉N₅O·H₂O (L1·H₂O) and C₁₆H₁₂N₆O (L2), were synthesized by solvent‐free aldol condensation at room temperature. L1, prepared by grinding picolinaldehyde with 2,3‐diamino‐3‐isocyanoacrylonitrile in a 1:1 molar ratio, crystallized as a monohydrate. L2 was prepared by grinding picolinaldehyde with 2,3‐diamino‐3‐isocyanoacrylonitrile in a 2:1 molar ratio. By varying the conditions of crystallization it was possible to obtain two polymorphs, viz. L2‐I and L2‐II; both crystallized in the monoclinic space group P2₁/c. They differ in the orientation of one pyridine ring with respect to the plane of the imidazole ring. In L2‐I, this ring is oriented towards and above the imidazole ring, while in L2‐II it is rotated away from and below the imidazole ring. In all three molecules, there is a short intramolecular N—H...N contact inherent to the planarity of the systems. In L1·H₂O, this involves an amino H atom and the C=N N atom, while in L2 it involves an amino H atom and an imidazole N atom. In the crystal structure of L1·H₂O, there are N—H...O and O—H...O intermolecular hydrogen bonds which link the molecules to form two‐dimensional networks which stack along [001]. These networks are further linked via intermolecular N—H...N(cyano) hydrogen bonds to form an extended three‐dimensional network. In the crystal structure of L2‐I, symmetry‐related molecules are linked via N—H...N hydrogen bonds, leading to the formation of dimers centred about inversion centres. These dimers are further linked via N—H...O hydrogen bonds involving the amide group, also centred about inversion centres, to form a one‐dimensional arrangement propagating in [100]. In the crystal structure of L2‐II, the presence of intermolecular N—H...O hydrogen bonds involving the amide group results in the formation of dimers centred about inversion centres. These are linked via N—H...N hydrogen bonds involving the second amide H atom and the cyano N atom, to form two‐dimensional networks in the bc plane. In L2‐I and L2‐II, C—H...π and π–π interactions are also present.     

Helical supramolecular assembly of N2,N2′‐bis[3‐(morpholin‐4‐yl)propyl]‐N1,N1′‐(1,2‐phenylene)dioxalamide dimethyl sulfoxide monosolvate

In the title compound, C₂₄H₃₆N₆O₆·C₂H₆OS, the carbonyl groups are in an antiperiplanar conformation, with O=C—C=O torsion angles of 178.59 (15) and −172.08 (16)°. An intramolecular hydrogen‐bonding pattern is depicted by four N—H...O interactions, which form two adjacent S(5)S(5) motifs, and an N—H...N interaction, which forms an S(6) ring motif. Intermolecular N—H...O hydrogen bonding and C—H...O soft interactions allow the formation of a meso‐helix. The title compound is the first example of a helical 1,2‐phenylenedioxalamide. The oxalamide traps one molecule of dimethyl sulfoxide through N—H...O hydrogen bonding. C—H...O soft interactions give rise to the two‐dimensional structure.     

1‐(1H‐Indol‐3‐ylcarbonyl)‐N‐(4‐methoxy­benzyl)formamide

In the title compound, C₁₈H₁₆N₂O₃, the indole ring is planar and the two adjacent carbonyl groups are mutually trans oriented with a torsion angle of 144.8 (3)°. The single C—C bond linking the two carbonyl functionalities is 1.539 (4) Å. Mol­ecules are linked into a two‐dimensional network by inter­molecular N—H⋯O hydrogen bonds.     

An X‐ray crystallographic and density functional theory study of (3Z)‐4‐(5‐ethylsulfonyl‐2‐hydroxyanilino)pent‐3‐en‐2‐one and (3Z)‐4‐(5‐tert‐butyl‐2‐hydroxyanilino)pent‐3‐en‐2‐one

The Schiff base enaminones (3Z)‐4‐(5‐ethylsulfonyl‐2‐hydroxyanilino)pent‐3‐en‐2‐one, C₁₃H₁₇NO₄S, (I), and (3Z)‐4‐(5‐tert‐butyl‐2‐hydroxyanilino)pent‐3‐en‐2‐one, C₁₅H₂₁NO₂, (II), were studied by X‐ray crystallography and density functional theory (DFT). Although the keto tautomer of these compounds is dominant, the O=C—C=C—N bond lengths are consistent with some electron delocalization and partial enol character. Both (I) and (II) are nonplanar, with the amino–phenol group canted relative to the rest of the molecule; the twist about the N(enamine)—C(aryl) bond leads to dihedral angles of 40.5 (2) and −116.7 (1)° for (I) and (II), respectively. Compound (I) has a bifurcated intramolecular hydrogen bond between the N—H group and the flanking carbonyl and hydroxy O atoms, as well as an intermolecular hydrogen bond, leading to an infinite one‐dimensional hydrogen‐bonded chain. Compound (II) has one intramolecular hydrogen bond and one intermolecular C=O...H—O hydrogen bond, and consequently also forms a one‐dimensional hydrogen‐bonded chain. The DFT‐calculated structures [in vacuo, B3LYP/6‐311G(d,p) level] for the keto tautomers compare favourably with the X‐ray crystal structures of (I) and (II), confirming the dominance of the keto tautomer. The simulations indicate that the keto tautomers are 20.55 and 18.86 kJ mol⁻¹ lower in energy than the enol tautomers for (I) and (II), respectively.     

N,N′‐Dicyclohexyl‐N‐[4‐(1H‐indol‐3‐yl)butanoyl]urea

The title compound, C₂₅H₃₅N₃O₂, is a novel urea derivative. Pairs of intermolecular N—H...O hydrogen bonds join the molecules into centrosymmetric R₂²(12) and R₂²(18) dimeric rings, which are alternately linked into one‐dimensional polymeric chains along the [010] direction. The parallel chains are connected via C—H...O hydrogen bonds to generate a two‐dimensional framework structure parallel to the (001) plane. The title compound was also modelled by solid‐state density functional theory (DFT) calculations. A comparison of the molecular conformation and hydrogen‐bond geometry obtained from the X‐ray structure analysis and the theoretical study clearly indicates that the DFT calculation agrees closely with the X‐ray structure.     

Hydrogen‐bonded sheet structures in methyl 4‐(4‐chloroanilino)‐3‐nitrobenzoate and methyl 1‐benzyl‐2‐(4‐chlorophenyl)‐1H‐benzimidazole‐5‐carboxylate

In methyl 4‐(4‐chloroanilino)‐3‐nitrobenzoate, C₁₄H₁₁ClN₂O₄, (I), there is an intramolecular N—H...O hydrogen bond and the intramolecular distances provide evidence for electronic polarization of the o‐quinonoid type. The molecules are linked into sheets built from N—H...O, C—H...O and C—H...π(arene) hydrogen bonds, together with an aromatic π–π stacking interaction. The molecules of methyl 1‐benzyl‐2‐(4‐chlorophenyl)‐1H‐benzimidazole‐5‐carboxylate, C₂₂H₁₇ClN₂O₂, (II), are also linked into sheets, this time by a combination of C—H...π(arene) hydrogen bonds and aromatic π–π stacking interactions.     

(6‐Oxido‐2‐oxo‐1,2‐dihydropyrimidine‐5‐carboxylato‐κ2O5,O6)bis[2‐(2‐pyridyl)‐1H‐benzimidazole‐κ2N2,N3]manganese(II) monohydrate

In the title compound, [Mn(C₅H₂N₂O₄)(C₁₂H₉N₃)₂]·H₂O, the Mn^II centre is surrounded by three bidentate chelating ligands, namely, one 6‐oxido‐2‐oxo‐1,2‐dihydropyrimidine‐5‐carboxylate (or uracil‐5‐carboxylate, Huca²⁻) ligand [Mn—O = 2.136 (2) and 2.156 (3) Å] and two 2‐(2‐pyridyl)‐1H‐benzimidazole (Hpybim) ligands [Mn—N = 2.213 (3)–2.331 (3) Å], and it displays a severely distorted octahedral geometry, with cis angles ranging from 73.05 (10) to 105.77 (10)°. Intermolecular N—H...O hydrogen bonds both between the Hpybim and the Huca²⁻ ligands and between the Huca²⁻ ligands link the molecules into infinite chains. The lattice water molecule acts as a hydrogen‐bond donor to form double O...H—O—H...O hydrogen bonds with the Huca²⁻ O atoms, crosslinking the chains to afford an infinite two‐dimensional sheet; a third hydrogen bond (N—H...O) formed by the water molecule as a hydrogen‐bond acceptor and a Hpybim N atom further links these sheets to yield a three‐dimensional supramolecular framework. Possible partial π–π stacking interactions involving the Hpybim rings are also observed in the crystal structure.     

Three‐dimensional networks in bis(imidazolium) 2,2′‐dithiodibenzoate and 4‐methylimidazolium 2‐[(2‐carboxyphenyl)disulfanyl]benzoate

Cocrystallization of imidazole or 4‐methylimidazole with 2,2′‐dithiodibenzoic acid from methanol solution yields the title 2:1 and 1:1 organic salts, 2C₃H₅N₂⁺·C₁₄H₁₀O₄S₂²⁻, (I), and C₄H₇N₂⁺·C₁₄H₁₀O₄S₂⁻, (II), respectively. Compound (I) crystallizes in the monoclinic C2/c space group with the mid‐point of the S—S bond lying on a twofold axis. The component ions in (I) are linked by intermolecular N—H...O hydrogen bonds to form a two‐dimensional network, which is further linked by C—H...O hydrogen bonds into a three‐dimensional network. In contrast, by means of N—H...O, N—H...S and O—H...O hydrogen bonds, the component ions in (II) are linked into a tape and adjacent tapes are further linked by π–π, C—H...O and C—H...π interactions, resulting in a three‐dimensional network.     

2‐Ethyl‐1‐[5‐(4‐methylphenyl)pyrazol‐3‐yl]‐3‐(thiophene‐2‐carbonyl)isothiourea: molecular ribbons containing three types of hydrogen‐bonded ring

The title compound, C₁₈H₁₈N₄OS₂, was prepared by reaction of S,S‐diethyl 2‐thenoylimidodithiocarbonate with 5‐amino‐3‐(4‐methylphenyl)‐1H‐pyrazole using microwave irradiation under solvent‐free conditions. In the molecule, the thiophene unit is disordered over two sets of atomic sites, with occupancies of 0.814 (4) and 0.186 (4), and the bonded distances provide evidence for polarization in the acylthiourea fragment and for aromatic type delocalization in the pyrazole ring. An intramolecular N—H...O hydrogen bond is present, forming an S(6) motif, and molecules are linked by N—H...O and N—H...N hydrogen bonds to form a ribbon in which centrosymmetric R₂²(4) rings, built from N—H...O hydrogen bonds and flanked by inversion‐related pairs of S(6) rings, alternate with centrosymmetric R₂²(6) rings built from N—H...N hydrogen bonds.     

2‐Ethyl‐6‐methylpyridin‐3‐ol and its salt bis(2‐ethyl‐3‐hydroxy‐6‐methylpyridinium) succinate

The title compounds, C₈H₁₁NO, (I), and 2C₈H₁₂NO⁺·C₄H₄O₄²⁻, (II), both crystallize in the monoclinic space group P2₁/c. In the crystal structure of (I), intermolecular O—H...N hydrogen bonds combine the molecules into polymeric chains extending along the c axis. The chains are linked by C—H...π interactions between the methylene H atoms and the pyridine rings into polymeric layers parallel to the ac plane. In the crystal structure of (II), the succinate anion lies on an inversion centre. Its carboxylate groups interact with the 2‐ethyl‐3‐hydroxy‐6‐methylpyridinium cations via intermolecular N—H...O hydrogen bonds with the pyridine ring H atoms and O—H...O hydrogen bonds with the hydroxy H atoms to form polymeric chains, which extend along the [01] direction and comprise R₄⁴(18) hydrogen‐bonded ring motifs. These chains are linked to form a three‐dimensional network through nonclassical C—H...O hydrogen bonds between the pyridine ring H atoms and the hydroxy‐group O atoms of neighbouring cations. π–π interactions between the pyridine rings and C—H...π interactions between the methylene H atoms of the succinate anion and the pyridine rings are also present in this network.     

Structural comparison of group 7 tricarbonyl complexes of 2‐{[2‐(1H‐imidazol‐4‐yl)ethyl]iminomethyl}‐5‐methylphenolate

Two tricarbonyl complexes of rhenium(I) and manganese(I) coordinated by the ligand 2‐{[2‐(1H‐imidazol‐4‐yl)ethyl]iminomethyl}‐5‐methylphenolate are reported, viz. fac‐tricarbonyl(2‐{[2‐(1H‐imidazol‐4‐yl‐κN³)ethyl]iminomethyl‐κN}‐5‐methylphenolato‐κO)rhenium(I) methanol monosolvate, [Re(C₁₆H₁₄N₃O₄)(CO)₃]·CH₃OH, (I), and fac‐tricarbonyl(2‐{[2‐(1H‐imidazol‐4‐yl‐κN³)ethyl]iminomethyl‐κN}‐5‐methylphenolato‐κO)manganese(I), fac‐[Mn(C₁₆H₁₄N₃O₄)(CO)₃], (II), display facial coordination in a distorted octahedral environment. The crystal structure of (I) is stabilized by O—H...O, N—H...O and C—H...O hydrogen‐bond interactions, while that of (II) is stabilized by N—H...O hydrogen‐bond interactions only. These interactions result in two‐dimensional networks and π–π stacking for both structures.     

4‐Amino‐7‐(2‐de­oxy‐2‐fluoro‐β‐d‐arabinofuranos­yl)‐5‐fluoro‐7H‐pyrrolo[2,3‐d]pyrimidine: a bis‐fluorinated analogue of 2′‐deoxy­tubercidin

The title compound, C₁₁H₁₂F₂N₄O₃, exhibits an anti glycosylic bond conformation, with a torsion angle χ = −117.8 (2)°. The sugar pucker is N‐type (C4′‐exo, between ³T₄ and E₄, with P = 45.3° and τ_m = 41.3°). The conformation around the exocyclic C—C bond is −ap (trans), with a torsion angle γ = −177.46 (15)°. The nucleobases are stacked head‐to‐head. The crystal structure is characterized by a three‐dimensional hydrogen‐bond network involving N—H⋯O, O—H⋯O and O—H⋯N hydrogen bonds.     

Two methyl 3‐(1H‐pyrazol‐4‐yl)octahydropyrrolo[3,4‐c]pyrrole‐1‐carboxylates form different hydrogen‐bonded sheets

In the molecules of both methyl (1RS,3SR,3aRS,6aSR)‐1‐methyl‐3‐(3‐methyl‐1‐phenyl‐1H‐pyrazol‐4‐yl)‐4,6‐dioxo‐5‐phenyloctahydropyrrolo[3,4‐c]pyrrole‐1‐carboxylate, C₂₅H₂₄N₄O₄, (I), and methyl (1RS,3SR,3aRS,6aSR)‐5‐(4‐chlorophenyl)‐1‐methyl‐3‐(3‐methyl‐1‐phenyl‐1H‐pyrazol‐4‐yl)‐4,6‐dioxooctahydropyrrolo[3,4‐c]pyrrole‐1‐carboxylate, C₂₅H₂₃ClN₄O₄, (II), the two rings of the pyrrolopyrrole fragment are both nonplanar, with conformations close to half‐chair forms. The overall conformations of the molecules of (I) and (II) are very similar, apart from the orientation of the ester function. The molecules of (I) are linked into sheets by a combination of an N—H...π(pyrrole) hydrogen bond and three independent C—H...O hydrogen bonds. The molecules of (II) are also linked into sheets, which are generated by a combination of an N—H...N hydrogen bond and two independent C—H...O hydrogen bonds, weakly augmented by a C—H...π(arene) hydrogen bond.     

A hydrogen‐bonded chain of rings in 5‐amino‐1‐(4‐methoxybenzoyl)‐3‐methylpyrazole and a three‐dimensional hydrogen‐bonded framework in 5‐amino‐3‐methyl‐1‐(2‐nitrobenzoyl)pyrazole

The molecules of 5‐amino‐1‐(4‐methoxybenzoyl)‐3‐methylpyrazole, C₁₂H₁₃N₃O₂, (I), and 5‐amino‐3‐methyl‐1‐(2‐nitrobenzoyl)pyrazole, C₁₁H₁₀N₄O₃, (II), both contain intramolecular N—H...O hydrogen bonds. The molecules of (I) are linked into a chain of rings by a combination of N—H...N and N—H...π(arene) hydrogen bonds, while those of (II) are linked into a three‐dimensional framework structure by N—H...N and C—H...O hydrogen bonds.     

Exo conformers of N‐(pyridin‐2‐yl)‐ and N‐(pyridin‐3‐yl)norbornene‐5,6‐dicarboximide crystals

Two isomeric pyridine‐substituted norbornenedicarboximide derivatives, namely N‐(pyridin‐2‐yl)‐exo‐norbornene‐5,6‐dicarboximide, (I), and N‐(pyridin‐3‐yl)‐exo‐norbornene‐5,6‐dicarboximide, (II), both C₁₄H₁₂N₂O₄, have been crystallized and their structures unequivocally determined by single‐crystal X‐ray diffraction. The molecules consist of norbornene moieties fused to a dicarboximide ring substituted at the N atom by either pyridin‐2‐yl or pyridin‐3‐yl in an anti configuration with respect to the double bond, thus affording exo isomers. In both compounds, the asymmetric unit consists of two independent molecules (Z′ = 2). In compound (I), the pyridine rings of the two independent molecules adopt different conformations, i.e. syn and anti, with respect to the methylene bridge. The intermolecular contacts of (I) are dominated by C—H...O interactions. In contrast, in compound (II), the pyridine rings of both molecules have an anti conformation and the two independent molecules are linked by carbonyl–carbonyl interactions, as well as by C—H...O and C—H...N contacts.     

Polymorphism in 2‐(4‐hydroxy‐2,6‐dimethylanilino)‐5,6‐dihydro‐4H‐1,3‐thiazin‐3‐ium chloride

Details of the structures of two conformational polymorphs of the title compound, C₁₂H₁₇N₂OS⁺·Cl⁻, are reported. In form (I) (space group P), the two N—H groups of the cation are in a trans conformation, while in form (II) (space group P2₁/c), they are in a cis arrangement. This results in different packing and hydrogen‐bond arrangements in the two forms, both of which have extended chains lying along the a direction. In form (I), these chains are composed of centrosymmetric R₄²(18) (N—H...Cl and O—H...Cl) hydrogen‐bonded rings and R₂²(18) (N—H...O) hydrogen‐bonded rings. In form (II), the chains are formed by centrosymmetric R₄²(18) (N—H...Cl and O—H...Cl) hydrogen‐bonded rings and by R₄²(12) (N—H...Cl) hydrogen‐bonded rings.     

Hydrogen‐bonded dimers in 3‐amino‐4‐anilino‐1H‐isochromen‐1‐one and a hydrogen‐bonded sheet in 3‐amino‐4‐[methyl(phenyl)amino]‐1H‐isochromen‐1‐one

The molecules of 3‐amino‐4‐anilino‐1H‐isochromen‐1‐one, C₁₅H₁₂N₂O₂, (I), and 3‐amino‐4‐[methyl(phenyl)amino]‐1H‐isochromen‐1‐one, C₁₆H₁₄N₂O₂, (II), adopt very similar conformations, with the substituted amino group PhNR, where R = H in (I) and R = Me in (II), almost orthogonal to the adjacent heterocyclic ring. The molecules of (I) are linked into cyclic centrosymmetric dimers by pairs of N—H...O hydrogen bonds, while those of (II) are linked into complex sheets by a combination of one three‐centre N—H...(O)₂ hydrogen bond, one two‐centre C—H...O hydrogen bond and two C—H...π(arene) hydrogen bonds.     

A three‐dimensional hydrogen‐bonded framework in 2‐amino‐6‐(N‐methylanilino)pyrimidin‐4(3H)‐one and a ribbon of fused hydrogen‐bonded rings in 2‐amino‐6‐(N‐methylanilino)‐5‐nitropyrimidin‐4(3H)‐one

The molecular dimensions of both 2‐amino‐6‐(N‐methylanilino)pyrimidin‐4(3H)‐one, C₁₁H₁₂N₄O, (I), and 2‐amino‐6‐(N‐methylanilino)‐5‐nitropyrimidin‐4(3H)‐one, C₁₁H₁₁N₅O₃, (II), are consistent with considerable polarization of the molecular–electronic structures. The molecules of (I) are linked into a three‐dimensional framework by a combination of one N—H...N hydrogen bond, two independent N—H...O hydrogen bonds and one C—H...π(arene) hydrogen bond. The molecules of (II) are linked into ribbons containing three types of edge‐fused ring by the combination of two independent three‐centre N—H...(O)₂ hydrogen bonds.