Monoclinic La1−xBaxMnO3 (x = 0.185) at 160 K

Single‐crystal X‐ray diffraction has shown that lanthanum barium manganese trioxide, La_0.815Ba_0.185MnO₃, is monoclinic (I2/c) below a first‐order phase transition at 187.1 (3) K. This result differs from the Pbnm symmetry usually assigned to colossal magnetoresistance oxides, A_1−xA′_xMnO₃ with x≃ 0.2, which adopt a distorted perovskite‐type crystal structure. The Mn atom lies on an inversion center, the disordered Li/Ba site is on a twofold axis and one of the two independent O atoms also lies on a twofold axis.     

Röntgenographische und schwingungsspektroskopische Untersuchung der Sulvanitmischkristalle Cu3Nb(SxSe1−x)4, Cu3Nb(SexTe1−x)4, und Cu3Ta(SxSe1−x)4 und Cu3Ta(SexTe1−x)4

X-Ray and Vibrational Studies of Sulvanite Mixed Cystals Cu₃Nb(S_xSe_1?x)₄, Cu₃Nb(Se_xTe_1?x)₄, Cu₃Ta(S_xSe_1?x)₄ and Cu₃Ta(Se_xTe_1?x)₄ Solid solutions Cu₃Nb(S_xSe_1?x)₄, Cu₃Nb(Se_xTe_1?x)₄, Cu₃Ta(S_xSe_1?x)₄ and Cu₃Ta(Se_xTe_1?x)₄ with sulvanite structure have been prepared in the range 0 ≤ x ≤ 1. The lattice constants in all systems obey the Vegard rule. Infrared and Raman spectra have been measured. The spectra of the compounds with mixed anion sublattices show additional peaks, compared to those of the end members, because besides the polyhedra MX₄ and MY₄ also groups MX₃Y, MX₂Y₂, and MXY₃ are present, and all groups are able to oscillate independently. By comparison of the peak intensities and the statistical frequency of the groups according to the composition, the additional valence vibrations could be attributed to the groups.     

New Phosphides La5Zn2−xP6 and Ce5Zn2−xP6 – the n = 4 Members of the REZn2P2·n(REP) Series

The new phosphides La₅Zn_2?xP₆ and Ce₅Zn_2?xP₆ were synthesized from the rare earth metals, LaZn and CeZn precursor compounds, Zn, and red phosphorous in NaCl/KCl salt fluxes. They crystallize with a new rhombohedral structure type: , Z = 3, a = 422.11(6), c = 6220(1) pm, wR2 = 0.0369, 356 F² values, 23 variables for La₅Zn_1.69P₆ and a = 417.05(6), c = 6162(1), wR2 = 0.0343, 286 F² values, 23 variables for Ce₅Zn_1.75P₆. The P^3? phosphide anions show an h²c⁴ stacking sequence in which the RE³⁺ and Zn²⁺ cations fill 5/6 and 1/6 of the octahedral and tetrahedral voids in an ordered manner, respectively, leading to a layer of condensed ZnP₄ tetrahedra and quintupled layers of condensed REP₆ octahedra. The structures of La₅Zn_2?xP₆ and Ce₅Zn_2?xP₆ belong to a larger family of phosphides which are intergrowth variants of CaAl₂Si₂ and NaCl related slabs according to REZn₂P₂·n(REP) with n = 4 for the present phosphides.     

A Dual Plating Battery with the Iodine/[ZnIx(OH2)4−x]2−x Cathode

Plating battery electrodes typically deliver higher specific capacity values than insertion or conversion electrodes because the ion charge carriers represent the sole electrode active mass, and a host electrode is unnecessary. However, reversible plating electrodes are rare for electronically insulating nonmetals. Now, a highly reversible iodine plating cathode is presented that operates on the redox couples of I₂/[ZnI_x(OH₂)_4?x]^2?x in a water‐in‐salt electrolyte. The iodine plating cathode with the theoretical capacity of 211 mAh g^?1 plates on carbon fiber paper as the current collector, delivering a large areal capacity of 4 mAh cm^?2. Tunable femtosecond stimulated Raman spectroscopy coupled with DFT calculations elucidate a series of [ZnI_x(OH₂)_4?x]^2?x superhalide ions serving as iodide vehicles in the electrolyte, which eliminates most free iodide ions, thus preventing the consequent dissolution of the cathode‐plated iodine as triiodides.     

Structural links between zeolite-type and clathrate hydrate-type materials: Synthesis and crystal Structure of [N(CH3)4]6[AlxSi8−xO18−x(OH)2+x] · 44H2O (x = 3–4)

A novel tetramethylammonium aluminosilicate hydrate with the approximate composition [NMe₄]₆[Al_xSi_8?xO_18?x(OH)_2+x] · 44H₂O (x = 3–4) has been identified by powder X-ray diffraction as a component in a polyphasic solid mixture which crystallized at room temperature from an aqueous NMe₄OH? Al₂O₃? SiO₂ solution. Large crystals of the novel hydrate phase could be mechanically selected from that mixture. The crystal structure has been determined from 1 196 unique MoKα diffraction data measured at 180 K: Tetragonal crystal system, cell constants a = 16.181(4) and c = 17.450(4) Å, space group P4/mnc with Z = 2 formula units per unit cell, R = 0.072. The host-guest compound is of polyhedral clathrate type with a mixed three-dimensional, (mainly) four-connected network composed of oligomeric aluminosilicate anions [Al_xSi_8?xO_18?x(OH)_2+x]^6? and H₂O molecules linked via hydrogen bonds O? H …? O. The aluminosilicate anions possess a cube-shaped (double four-ring) structure. Orientationally disordered cationic guest species NMe₄⁺ are enclosed in the large [4⁶6⁸] and [4¹5¹⁰6⁷] polyhedral voids of the host framework; the small [4⁶] cages (i.e. the double four-ring anions) and [4³5⁶] cages are empty. The hydrate is a further member in a recently discovered series of clathrates with mixed tetrahedral networks, which provides a structure-chemical link between zeolite- and clathrate hydrate-type host-guest compounds.     

Die Reaktion der Zweikomponentensysteme P(OR)3 − x(NR2)x (x = 0–3)/CCl4 und P4/CCl4 mit HF-Donatoren

Reaction of the Two-component Systems P(OR)_{3 ? x}(NR₂)_x (x = 0–3)/CCl₄ and P₄/CCl₄ with HF-Donators The combination of organylammonium fluorides and carbon tetrachloride is a good agent for oxidative fluorination of trivalent phosphorus compounds. As oxidation products [(RO)PF₅]^? and (RO)₂P(O)F are obtained from P(OR)₃, (Et₂N)₂P(O)F and (Et₂N)₂(EtO)PF₂ from P(OEt)(NEt₂)₂ as well as (Et₂N)₃PF₂ and [(Et₂N)₃PF]⁺ from P(NEt₂)₃. In the system R₂NH/CCl₄/Et₃N · n HF P₄ is fast oxidized forming [HPF₅]^?, R₂NH · PF₅ and (R₂N)₂P(O)F. In the case of simultaneous addition of alcohols [(RO)PF₅]^?, (RO)₃PO and (R₂N)₂P(O)F are formed. The reactions are controlled by the nucleophilic power and the concentration of fluoride, the acidity of the system, and the temperature.     

Darstellung von μ-Schwefeldisulfoniumsalzen [(CH3)2S?Sx?S(CH3)2]2+2A− (x = 1–3, A− = AsF6−, SbF6−, SbCl6−). Über die Analogie im Reaktionsverhalten zwischen Sulfanen und Sulfoniumsalzen

Preparation of μ-Sulfurdisulfonium Salts [(CH₃)₂S? S_x? S(CH₃)₂]²⁺2A^? (x = 1–3, A^? = AsF₆^?, SbF₆^?, SbCl₆^?). On the Analogy of the Reactivity of Sulfanes and Sulfonium Salts The preparation of the μ-sulfurdisulfonium salts [(CH₃)₂S? S_x? S(CH₃)₂]²⁺(A^?)₂ with x = 1–3 and A^? = AsF₆^?, SbF₆^?, SbCl₆^? is reported. The salts are formed by reaction of (CH₃)₂SH⁺A^? and (CH₃)₂SSH⁺A^? with SCl₂ and S₂Cl₂, resp. They are characterized by vibrational spectroscopic measurements. [(CH₃)₂S? S₂? S(CH₃)₂]²⁺(SbF₆^?)₂ crystallizes in the space group C2/c with a = 1 884.5(7) pm, b = 1 302.8(5) pm, c = 1 477.2(5) pm, β = 98.62(3)° und Z = 8.     

Atom Exchange Versus Reconstruction: (GexAs4−x)x− (x=2, 3) as Building Blocks for the Supertetrahedral Zintl Cluster [Au6(Ge3As)(Ge2As2)3]3−

The Zintl anion (Ge₂As₂)^2? represents an isostructural and isoelectronic binary counterpart of yellow arsenic, yet without being studied with the same intensity so far. Upon introducing [(PPh₃)AuMe] into the 1,2‐diaminoethane (en) solution of (Ge₂As₂)^2?, the heterometallic cluster anion [Au₆(Ge₃As)(Ge₂As₂)₃]^3? is obtained as its salt [K(crypt‐222)]₃[Au₆(Ge₃As)(Ge₂As₂)₃]?en?2 tol ( 1 ). The anion represents a rare example of a superpolyhedral Zintl cluster, and it comprises the largest number of Au atoms relative to main group (semi)metal atoms in such clusters. The overall supertetrahedral structure is based on a (non‐bonding) octahedron of six Au atoms that is face‐capped by four (Ge_xAs_4?x)^x? (x=2, 3) units. The Au atoms bind to four main group atoms in a rectangular manner, and this way hold the four units together to form this unprecedented architecture. The presence of one (Ge₃As)^3? unit besides three (Ge₂As₂)^2? units as a consequence of an exchange reaction in solution was verified by detailed quantum chemical (DFT) calculations, which ruled out all other compositions besides [Au₆(Ge₃As)(Ge₂As₂)₃]^3?. Reactions of the heavier homologues (Tt₂Pn₂)^2? (Tt=Sn, Pb; Pn=Sb, Bi) did not yield clusters corresponding to that in 1 , but dimers of ternary nine‐vertex clusters, {[AuTt₅Pn₃]₂}^4? (in 2 – 4 ; Tt/Pn=Sn/Sb, Sn/Bi, Pb/Sb), since the underlying pseudo‐tetrahedral units comprising heavier atoms do not tend to undergo the said exchange reactions as readily as (Ge₂As₂)^2?, according to the DFT calculations.     

K and Ba distribution in the structures of the clathrate compounds KxBa16−x(Ga,Sn)136 (x = 0.8, 4.4, and 12.9) and KxBa8−x(Ga,Sn)46 (x = 0.3)

Studies of the K–Ba–Ga–Sn system produced the clathrate compounds K_0.8(2)Ba_15.2(2)Ga_31.0(5)Sn_105.0(5) [a = 17.0178 (4) Å], K_4.3(3)Ba_11.7(3)Ga_27.4(4)Sn_108.6(4) [a = 17.0709 (6) Å] and K_12.9(2)Ba_3.1(2)Ga_19.5(4)Sn_116.5(4) [a = 17.1946 (8) Å], with the type‐II structure (cubic, space group Fdm), and K_7.7(1)Ba_0.3(1)Ga_8.3(4)Sn_37.7(4) [a = 11.9447 (4) Å], with the type‐I structure (cubic, space group Pmn). For the type‐II structures, only the smaller (Ga,Sn)₂₄ pentagonal dodecahedral cages are filled, while the (Ga,Sn)₂₈ hexakaidecahedral cages remain empty. The unit‐cell volume is directly correlated with the K:Ba ratio, since an increasing amount of monovalent K occupying the cages causes a decreasing substitution of the smaller Ga in the framework. All three formulae have an electron count that is in good agreement with the Zintl–Klemm rules. For the type‐I compound, all framework sites are occupied by a mixture of Ga and Sn atoms, with Ga showing a preference for Wyckoff site 6c. The (Ga,Sn)₂₀ pentagonal dodecahedral cages are occupied by statistically disordered K and Ba atoms, while the (Ga,Sn)₂₄ tetrakaidecahedral cages encapsulate only K atoms. Large anisotropic displacement parameters for K in the latter cages suggest an off‐centering of the guest atoms.     

Kristallstrukturen aus CaBe2Ge2‐ und CeMg2Si2‐analogen Blöcken: Die Phosphide LnPt2P2−x (Ln: La,Sm)

Crystal Structures of CaBe₂Ge₂ and CeMg₂Si₂ analogous Units: The Phosphides LnPt₂P_2?x (Ln: La, Sm) Single crystals of LaPt₂P_1.44 (a = 4.174(1), c = 19.212(5) Å) were grown by reaction of vaporous phosphorus with LaPt₂ at 1050 °C during two weeks, whereas SmPt₂P_1.50 (a = 4.131(1), c = 19.086(4) Å) was synthesized by heating mixtures of the elements at 900 and 1100 °C (60 h) and annealing at 1050 °C (300 h). Both phosphides were investigated by single crystal X‐ray methods. Their crystal structures (I4/mmm; Z = 4) consist of CaBe₂Ge₂ and CeMg₂Si₂ analogous units alternating with each other along [001]. The positions of the P1 atoms are occupied incompletely causing the deviation to the 1:2:2 stoichiometry. Another compounds LnPt₂P_2?x were studied by X‐ray powder diffraction resulting in the following lattice constants: a = 4.150(1), c = 19.132(5) Å for CePt₂P_2–x, a = 4.137(1), c = 19.085(4) Å for PrPt₂P_2?x, and a = 4.127(1), c = 19.040(2) Å for NdPt₂P_2?x.     

Structure and electronic properties of hollow‐caged C60 fullerene‐derived (MN4)nC6(10 − n) (M = Zn,Mg, Fe,n = 1−6) complexes

Unique hollow‐caged (MN₄)_nC_{6(10 ? n)} (M = Zn, Mg, Fe, n = 1?6) complexes designed by introduction of n porphyrinoid fragments in C₆₀ fullerene structure were proposed and the atomic and electronic structures were calculated using LC‐DFT MPWB95 and M06 potentials and 6‐311G(d)/6‐31G(d) basis sets. The complexes were optimized using various symmetric configurations from the highest O_h to the lowest C₁ point groups in different spin states from S = 0 (singlet) to S = 7 (quindectet) for M = Fe to define energetically preferable atomic and electronic structures. Several metastable complexes were determined and the key role of the metal ions in stabilization of the atomic structure of the complexes was revealed. For Fe₆N₂₄C₂₄, the minimum energy was reported for C_2h, D_2h, and D_4h symmetry of pentet state S = 2, so the complex can be regarded as unique molecular magnet. It was found that the metal partial density of states determine the nature of HOMO and LUMO levels making the clusters promising catalysts. © 2014 Wiley Periodicals, Inc.     

Thermolysis of the phenyltin chlorides,PhxSnCl4–x, (x=1−3): Products and pathways

The thermal degradation of triphenyltin chloride, diphenyltin dichloride and phenyltin trichloride has been studied by pyrolysis at 375°C in sealed tubes for various time periods. In all cases, biphenyl and tin(II) chloride are produced. For both phenyltin trichloride and diphenyltin dichloride, ter- and poly-phenyls are also obtained. In some cases tin(IV) chloride or elemental tin are obtained. Pathways that account for all observed products are presented.     

Barium‐deficient celsian,Ba1−xAl2−2xSi2+2xO8 (x = 0.20 or 0.06)

Barium‐deficient forms of celsian (barium aluminium silicate) with the formula Ba_1−xAl_2−2xSi_2+2xO₈ (x = 0.20 and 0.06) have been identified. In contrast with the celsian–orthoclase solid solutions which have been reported previously, these forms, refined in the space group C2/m, with Ba and one O atom in the 4i sites with m site symmetry, and a further O atom in a 4g site with twofold axial symmetry, suggest a slight solid solution with silica. The serendipitous preparation of the compounds represents a possible hazard associated with solid‐state synthesis.