A low‐temperature modification of hexa‐tert‐butyldisilane and a new polymorph of 1,1,2,2‐tetra‐tert‐butyl‐1,2‐diphenyldisilane

Crystals of hexa‐tert‐butyldisilane, C₂₄H₅₄Si₂, undergo a reversible phase transition at 179 (2) K. The space group changes from Ibca (high temperature) to Pbca (low temperature), but the lattice constants a, b and c do not change significantly during the phase transition. The crystallographic twofold axis of the molecule in the high‐temperature phase is replaced by a noncrystallographic twofold axis in the low‐temperature phase. The angle between the two axes is 2.36 (4)°. The centre of the molecule undergoes a translation of 0.123 (1) Å during the phase transition, but the conformation angles of the molecule remain unchanged. Between the two tri‐tert‐butylsilyl subunits there are six short repulsive intramolecular C—H...H—C contacts, with H...H distances between 2.02 and 2.04 Å, resulting in a significant lengthening of the Si—Si and Si—C bonds. The Si—Si bond length is 2.6863 (5) Å and the Si—C bond lengths are between 1.9860 (14) and 1.9933 (14) Å. Torsion angles about the Si—Si and Si—C bonds deviate by approximately 15° from the values expected for staggered conformations due to intramolecular steric H...H repulsions. A new polymorph is reported for the crystal structure of 1,1,2,2‐tetra‐tert‐butyl‐1,2‐diphenyldisilane, C₂₈H₄₆Si₂. It has two independent molecules with rather similar conformations. The Si—Si bond lengths are 2.4869 (8) and 2.4944 (8) Å. The C—Si—Si—C torsion angles deviate by between −3.4 (1) and −18.5 (1)° from the values expected for a staggered conformation. These deviations result from steric interactions. Four Si—C(t‐Bu) bonds are almost staggered, while the other four Si—C(t‐Bu) bonds are intermediate between a staggered and an eclipsed conformation. The latter Si—C(t‐Bu) bonds are about 0.019 (2) Å longer than the staggered Si—C(t‐Bu) bonds.     

Oxidative C‐C Coupling of Dilithium (2‐Pyridylmethanidyl)(tert‐butyldimethylsilyl)amide with White Phosphorus

(2‐Pyridylmethyl)(tert‐butyldimethylsilyl)amine ( 1 ) can be lithiated once or twice yielding lithium (2‐pyridylmethyl)(tert‐butyldimethylsilyl)amide ( 2 ) and dilithium (2‐pyridylmethanidyl)(tert‐butyldimethylsilyl)amide ( 3 ), respectively. The oxidation of 3 with white phosphorus yields dilithium 1,2‐dipyridyl‐1,2‐bis(tert‐butyldimethylsilylamido)ethane ( 4 ) which crystallizes after partial hydrolysis as an adduct of the form 2 · 4 .     

[P,P‐Di‐tert‐butyl‐N‐trimethylsilyl‐P‐(trimethylsilylamino)phosphine imidato‐κ2N,N′]bis(pyridine‐κN)lithium(I)

In the title compound, [Li(C₁₄H₃₆N₂PSi₂)(C₅H₅N)₂], the bulky chelating monoanionic P,P‐di‐tert‐butyl‐N‐trimethylsilyl‐P‐(trimethylsilylamino)phosphine imidate ligand and two pyridine ligands bind to Li in a pseudo‐tetrahedral arrangement with twofold symmetry. The Li—N_phosphine distance is 2.048 (5) Å, while the Li?P distance is 2.520 (6) Å.     

Monomeric Homoleptic (2‐Pyridylmethyl)(tert‐butyldimethylsilyl)amido Complexes of the Divalent Metals Mg,Mn, Fe,Co, and Zn

The transamination reaction of M[N(SiMe₃)₂]₂ with (2‐pyridylmethyl)(tert‐butyldimethylsilyl)amine yields the corresponding homoleptic metal bis[(2‐pyridylmethyl)(tert‐butyldimethylsilyl)amides] of Mg ( 1 ), Mn ( 2 ), Fe ( 3 ), Co ( 4 ) and Zn ( 5 ). All these compounds crystallize from hexane isotypic in the space group C2/c. From toluene the zinc derivative precipitates as toluene solvate 5 ·toluene. The molecular structures of these compounds are very similar with large NMN angles to the amide nitrogen atoms with NMN values of 148° ( 1 ) and 150° ( 5 ) for the diamagnetic compounds and 156° for the paramagnetic derivatives 2 and 3 . The Co derivative 4 displays a rather small NCoN angle of 142°. Different synthetic routes have been explored for compound 3 which is also available via the metallation reaction of bis(2,4,6‐trimethylphenyl)iron with (2‐pyridylmethyl)(tert‐butyldimethylsilyl)amine and via the metathesis reaction of lithium (2‐pyridylmethyl)(tert‐butyldimethylsilyl)amide with [(thf)₂FeCl₂]. In course of the metathesis reaction, an equimolar amount of lithium (2‐pyridylmethyl)(tert‐butyldimethylsilyl)amide and [(thf)₂FeCl₂] yields heteroleptic (2‐pyridylmethyl)(tert‐butyldimethylsilyl)amido iron(II) chloride ( 6 ) which crystallizes as a centrosymmetric dimeric molecule. The oxidative C‐C coupling reaction of 5 with Sn[N(SiMe₃)₂]₂ leads to the formation of tin(II) 1,2‐bis(2‐pyridyl)‐1,2‐bis(tert‐butyldimethylsilylamido)ethane, tin metal and Zn[N(SiMe₃)₂]₂.     

Simultaneous analysis of seven 2‐hydroxy fatty acids as tert‐butyldimethylsilyl derivatives in plasma by gas chromatography–mass spectrometry

An efficient method for the simultaneous analysis of seven 2‐hydroxy fatty acids (2‐HFAs) as tert‐butyldimethylsilyl (TBDMS) derivative was developed by gas chromatography–mass spectrometry in selected ion monitoring mode. New mass spectral data on 2‐hydroxycapric, 2‐hydroxypalmitic, 2‐hydroxystearic and 2‐hydroxybehenic acids as di‐TBDMS derivatives for hydroxyl and carboxyl groups were built. Under the optimal conditions, the present method showed a good correlation coefficient (r ≥ 0.999) in the range of 0.01–0.5 µg. The precision showed low relative standard deviation of <10%, and the accuracy (percentage relative error) varied from ?5.2 to 0.3 for the seven 2‐HFAs studied. Recovery rates of all 2‐HFAs were ≥ 93.2% with good precision. When applied to normal human plasma, seven 2‐HFAs were positively identified. Therefore, the present efficient method will be useful for simultaneous analysis of 2‐HFAs in plasma. Copyright © 2014 John Wiley & Sons, Ltd.     

Bis(tert‐butyl­sulfonyl)ethyne and 1‐tert‐butyl­sulfinyl‐2‐tert‐butyl­sulfonyl­ethyne

The title compounds are electron‐poor ethynes. The structure determination of bis­(tert‐butyl­sulfonyl)ethyne, C₁₀H₁₈O₄S₂, (I), is the first of a bis‐sulfonyl‐substituted ethyne. The mol­ecule is situated on a crystallographic inversion centre. The S—Csp bond [1.737 (2) Å] is the longest of this type reported to date. 1‐tert‐Butyl­sulfinyl‐2‐tert‐butylsulfonyl­ethyne, C₁₀H₁₈O₃S₂, (II), which is basically the same as (I) minus one O atom, crystallizes isomorphous with (I). This results in a nearly equal distribution of the three O atoms over the four possible positions.     

Acidic metabolite profiling analysis of catecholamine and serotonin as O‐ethoxycarbonyl/tert‐butyldimethylsilyl derivatives by gas chromatography–mass spectrometry

A novel derivatization method was developed for the simultaneous determination of six acidic metabolites of catecholamine and serotonin by gas chromatography–mass spectrometry (GC‐MS). The metabolites were converted to O‐ethoxycarbonyl/tert‐butyldimethylsilyl (EOC/TBDMS) derivatives for the direct GC‐MS analysis in selected ion monitoring mode. Their mass spectral pattern as EOC/TBDMS derivatives showed characteristic fragment ions of [M – 15]⁺ and [M – 57]⁺, which permitted rapid and accurate structural confirmation of acidic metabolites. The present method was linear (r ≥ 0.998), reproducible (percentage relative standard deviation = 1.0–10.0) and accurate (% relative error = ?9.7–9.8) with detection limits of 0.001–4.7 ng/mL. When applied to human urine samples, the method allowed simultaneous determination of six acidic metabolites of catecholamine and serotonin. Copyright © 2012 John Wiley & Sons, Ltd.     

Bis(μ‐3,5‐di‐tert‐butylcatecholato‐O1:O1,O2)bis[tris(pyridine‐N)cadmium(II)] dipyridine solvate

X‐ray diffraction shows that the title cadmium(II) complex, [Cd₂(C₁₄H₂₀O₂)₂(C₅H₅N)₆]·2C₅H₅N, has a dimeric structure in which two (py)₃Cd(3,5‐di‐tert‐butylcatecholate) units (py is pyridine) are connected by two bridging O atoms, the coordination of the Cd atoms being distorted octahedral. There are two symmetrically independent dimers in the crystal structure; one is in a general position and the other lies about an inversion centre. In both cases, the bridging Cd—O distances between the Cd–catecholate units [2.224 (2)–2.237 (2) Å] are shorter than the bridging Cd—O distances within the catecholate cycle [2.273 (2)–2.281 (2) Å]. The Cd—N_py distances are 2.354 (2)–2.471 (2) Å. Besides the main mol­ecules, the crystal also contains pyridine solvate mol­ecules.     

Reaction of the Pincer‐type Ligand {2, 6‐[P(O)(OEt)2]2‐4‐tert‐Bu‐C6H2}— with [Ph3C]+[PF6]—. Unprecedented Rearrangement and Carbon‐Carbon Bond Formation

The reaction of the organolithium derivative {2, 6‐[P(O)(OEt)₂]₂‐4‐tert‐Bu‐C₆H₂}Li ( 1 ‐Li) with [Ph₃C]⁺[PF₆]^— gave the substituted biphenyl derivative 4‐[(C₆H₅)₂CH]‐4′‐[tert‐Bu]‐2′, 6′‐[P(O)(OEt)₂]₂‐1, 1′‐biphenyl ( 5 ) which was characterized by ¹H, ¹³C and ³¹P NMR spectroscopy and single crystal X‐ray analysis. Ab initio MO‐calculations reveal the intramolecular O···C distances in 5 of 2.952(4) and 2.988(5)Å being shorter than the sum of the van der Waals radii of oxygen and carbon to be the result of crystal packing effects. Also reported are the synthesis and structure of the bromine‐substituted derivative {2, 6‐[P(O)(OEt)₂]₂‐4‐tert‐Bu]C₆H₂}Br ( 9 ) and the structure of the protonated ligand 5‐tert‐Bu‐1, 3‐[P(O)(OEt)₂]₂C₆H₃ ( 1 ‐H). The structures of 1 ‐H, 5 , and 9 are compared with those of related metal‐substituted derivatives.     

N‐[Bis(2,4,6‐tri­methyl­phenoxy)­phos­phinoyl]‐P,P,P‐tris(2,4,6‐tri­methyl­phenoxy)phosphazene

The title compound, C₄₅H₅₅NO₆P₂, consists of an acyclic P=N—P(O) monophosphazene chain and five bulky 2,4,6‐tri­methyl­phenoxy side groups which predominantly determine the molecular shape. Although the P—N single [1.586 (3) Å] and P=N double [1.517 (3) Å] bonds are significantly different from each other, both are substantially shorter than the ideal P—N single bond. The P—N—P angle [146.0 (2)°] corresponds to the upper limit reported for acyclic phosphazene derivatives in the literature.     

ansa‐[(tert‐Butylamino)(isodicyclo­pentadienyl)dimethylsilane]Zr(NMe2)2 prepared by an amine‐elimination reaction

An amine‐elimination reaction was used to obtain the title compound, i.e. (N‐tert‐butyl‐N‐{[(1,2,3,3a,7a‐η)‐4,5,6,7‐tetra­hydro‐4,7‐methano‐1H‐inden‐2‐yl]­di­methyl­silyl}amido‐κN)bis(N‐methyl­methanaminato‐κN)­zirconium(IV) or [isodiCpSiMe₂N‐tert‐butyl]Zr(NMe₂)₂ (Cp is cyclo­penta­dienyl), [Zr(C₁₆H₂₅NSi)(C₂H₆N)₂], in very good yield. Treatment of isodiCpHSiMe₂NH‐tert‐butyl with Zr(NMe₂)₄ leads to the formation of a yellow solid that can be purified by sublimation. The single‐crystal structure of the product shows the exo complexation of the isodi­cyclo­penta­dienyl ligand to the Zr atom. The Cp portion of this ligand is bonded to the Zr atom in a η⁵ manner, with a Zr—Cg (Cg is the ring centroid) distance of 2.2352 (10) Å. The isodiCpSiMe₂N‐tert‐butyl ligand has a constrained geometry, which is exhibited by the small angle of 95.55 (10)° for N—Si—C_Cp.     

Ferrocene compounds. XXXIV. 1′‐(tert‐Butoxycarbonylamino)ferrocene‐1‐carboxylic acid

Heteroannularly substituted ferrocene derivatives can act as model systems for various hydrogen‐bonded assemblies of biomol­ecules formed, for instance, by means of O—H⋯O and N—H⋯O hydrogen bonding. The crystal structure analysis of 1′‐(tert‐butoxy­carbonyl­amino)­ferrocene‐1‐carbox­ylic acid, [Fe(C₁₀H₁₄NO₂)(C₆H₅O₂)] or (C₅H₄COOH)Fe(C₅­H₄NHCOOC(CH₃)₃, reveals two independent mol­ecules within the asymmetric unit, and these are joined into discrete dimers by two types of intermolecular hydrogen bonds, viz. O—H⋯O and N—H⋯O. The –COOH and –NHCOOR groups are archetypes for dimer formation via two eight‐membered rings. The O—H⋯O hydrogen bonds [2.656 (3) and 2.663 (3) Å] form a cyclic carboxylic acid dimer motif. Another eight‐membered ring is formed by N—H⋯O hydrogen bonds [2.827 (3) and 2.854 (3) Å] between the N—H group and an O atom of another carbamoyl moiety. The dimers are assembled in a herring‐bone fashion in the bc plane.     

catena‐Poly[[bis(cis‐1‐tert‐butyltetrazole‐κN4)copper(II)]‐di‐μ‐chloro]

The title polymeric compound, [CuCl₂(C₅H₁₀N₄)₂]_n, is the first structurally characterized complex with a bulky 1‐alkyl­tetrazole ligand. The coordination polyhedron of the Cu atom is an elongated octahedron. The equatorial positions of the octahedron are occupied by the two Cl atoms, with Cu—Cl distances of 2.2920 (8) and 2.2796 (9) Å, and by the two N‐4 atoms of the tetrazole ligands, with Cu—N distances of 2.023 (2) and 2.039 (2) Å. Two symmetry‐related Cl atoms occupy the axial positions, at distances of 2.8244 (8) and 3.0174 (8) Å from the Cu atom. The [CuCl₂(C₅H₁₀N₄)₂] units form infinite chains extended along the b axis, linked together only by van der Waals interactions. The skeleton of each chain consists of Cu and Cl atoms.     

threo‐2‐(2,6‐Dimethoxy­phen­oxy)‐1‐(4‐hydr­oxy‐3,5‐dimethoxy­phenyl)­propane‐1,3‐diol: a conformational study

In the crystal structure of the title compound, C₁₉H₂₄O₈, the mol­ecules adopt a conformation in which the bulky 2,6‐dimethoxy­phen­oxy and 4‐hydr­oxy‐3,5‐dimethoxy­phen­yl groups are almost as far apart as possible. The C(aryl)·C(aryl) distance is 4.8766 (19) Å, which is close to the calculated maximum value (4.92 Å). The C(aryl)—C—C—O(aryloxy) torsion angle is 173.76 (11)° and the C(benzylic)—C—O—C(aryl) torsion angle is 149.09 (11)°. The conformation is compared with those of related lignin model compounds. The hydrogen‐bonding pattern is discussed in terms of graph‐set theory.     

cis‐Di­phenyl­bis(1,3,5‐tri­aza‐7‐phospha­adamantane‐κP)platinum(II)

The structure of the title compound, [Pt(C₆H₅)₂(C₆H₁₂N₃P)₂] or [Pt(Ph)₂(PTA)₂] (where Ph is phenyl and PTA is 1,3,5‐tri­aza‐7‐phosphaadamantane), is discussed. Selected geom­etric parameters are: Pt—P = 2.2888 (16) and 2.2944 (17) Å, Pt—C = 2.052 (5) and 2.064 (6) Å, C—Pt—C = 84.6 (2)° and P—Pt—P = 99.28 (6)°. The effective cone angle for the PTA ligands was calculated as 113°.     

Cobalt(II) and cadmium(II) square grids supported with 4,4′‐bipyrazole and accommodating 3‐carboxyadamantane‐1‐carboxylate

In poly[[bis(μ‐4,4′‐bi‐1H‐pyrazole‐κ²N²:N^2′)bis(3‐carboxyadamantane‐1‐carboxylato‐κO¹)cobalt(II)] dihydrate], {[Co(C₁₂H₁₅O₄)₂(C₆H₆N₄)₂]·2H₂O}_n, (I), the Co²⁺ cation lies on an inversion centre and the 4,4′‐bipyrazole (4,4′‐bpz) ligands are also situated across centres of inversion. In its non‐isomorphous cadmium analogue, {[Cd(C₁₂H₁₅O₄)₂(C₆H₆N₄)₂]·2H₂O}_n, (II), the Cd²⁺ cation lies on a twofold axis. In both compounds, the metal cations adopt an octahedral coordination, with four pyrazole N atoms in the equatorial plane [Co—N = 2.156 (2) and 2.162 (2) Å; Cd—N = 2.298 (2) and 2.321 (2) Å] and two axial carboxylate O atoms [Co—O = 2.1547 (18) Å and Cd—O = 2.347 (2) Å]. In both structures, interligand hydrogen bonding [N...O = 2.682 (3)–2.819 (3) Å] is essential for stabilization of the MN₄O₂ environment with its unusually high (for bulky adamantanecarboxylates) number of coordinated N‐donor co‐ligands. The compounds adopt two‐dimensional coordination connectivities and exist as square‐grid [M(4,4′‐bpz)₂]_n networks accommodating monodentate carboxylate ligands. The interlayer linkage is provided by hydrogen bonds from the carboxylic acid groups via the solvent water molecules [O...O = 2.565 (3) and 2.616 (3) Å] to the carboxylate groups in the next layer [O...O = 2.717 (3)–2.841 (3) Å], thereby extending the structures in the third dimension.     

Hydrogen‐bonding network of N,N′‐bis[2‐(tert‐butyldimethylsiloxy)ethyl]ethylenediammonium dichloride

The title salt, C₁₈H₄₆N₂O₂Si₂²⁺·2Cl⁻, has been synthesized by reaction of N,N′‐bis(2‐hydroxyethyl)ethylenediamine with tert‐butyldimethylsilyl chloride. The zigzag backbone dication is located across an inversion centre and the two chloride anions are related by inversion symmetry. The ionic components form a supramolecular two‐dimensional network via N—H...Cl hydrogen bonding, which is responsible for the high melting point compared with the oily compound N,N′‐bis[2‐(tert‐butyldimethylsiloxy)ethyl]ethylenediamine.     

trans‐Bis­[O‐2,4‐di‐tert‐butyl­phenyl (4‐methoxy­phenyl)­di­thio­phosphonato‐κ2S,S′]­nickel(II)

In the the title compound, [Ni(C₂₁H₂₈O₂PS₂)₂], the Ni atom resides on an inversion centre and is coordinated in a square‐planar array by four S atoms, with Ni—S and P—S bond lengths of 2.2336 (12)/2.2351 (13) and 1.9910 (16)/2.0010 (17) Å, respectively. The two O‐2,4‐di‐tert‐butyl­phenyl and two 4‐methoxy­phenyl moieties adopt trans configurations about the central Ni atom.     

(Di‐tert‐butylmethylphosphane)(η2‐di‐tert‐butylphosphanylphosphinidene)(triphenylphosphane)platinum(0)

The crystal structure of the title compound, [Pt(C₈H₁₈P₂)(C₉H₂₁P)(C₁₈H₁₅P)] or [(Ph₃P)(^tBu₂PMe)Pt(η²‐^tBu₂PP)], contains four molecules in the asymmetric unit with slightly different conformations. The P—P distances in the ^tBu₂PP ligands are similar for all four molecules [2.0661 (13)–2.0678 (13) Å] and indicate a multiple character of the P—P bond in the ^tBu₂PP ligand. Molecules of the asymmetric unit can be assembled into a tetrahedron that fulfils the requirements for a rhombic disphenoid. The coordination of the Pt atom in all four molecules is square planar, with r.m.s. deviations from the PtP₄ planes in the range 0.03–0.05 Å. All planes of the PtP₄ groups are approximately parallel to the ab plane of the unit cell. The structure represents an unusual unsymmetrical platinum phosphinidene derivative.     

Hydrogen‐bonded frameworks of bis(2‐carboxypyridinium) hexafluorosilicate and bis(2‐carboxyquinolinium) hexafluorosilicate dihydrate

In bis(2‐carboxypyridinium) hexafluorosilicate, 2C₆H₆NO₂⁺·SiF₆²⁻, (I), and bis(2‐carboxyquinolinium) hexafluorosilicate dihydrate, 2C₁₀H₈NO₂⁺·SiF₆²⁻·2H₂O, (II), the Si atoms of the anions reside on crystallographic centres of inversion. Primary inter‐ion interactions in (I) occur via strong N—H...F and O—H...F hydrogen bonds, generating corrugated layers incorporating [SiF₆]²⁻ anions as four‐connected net nodes and organic cations as simple links in between. In (II), a set of strong N—H...F, O—H...O and O—H...F hydrogen bonds, involving water molecules, gives a three‐dimensional heterocoordinated rutile‐like framework that integrates [SiF₆]²⁻ anions as six‐connected and water molecules as three‐connected nodes. The carboxyl groups of the cation are hydrogen bonded to the water molecule [O...O = 2.5533 (13) Å], while the N—H group supports direct bonding to the anion [N...F = 2.7061 (12) Å].