A new mesogenic fluorene derivative: 2,7-bis(4-pentylphenyl)-9,9-diethyl-9H-fluorene

The title compound, 2,7-bis(4-pentylphenyl)-9,9-diethyl-9H-fluorene, is a new mesogenic compound containing the fluorene moiety. It exhibits a monotropic nematic liquid crystalline behaviour, with isotropisation temperature of 53°C. The compound is also polymorphic in the solid state, with one crystal phase melting at 103°C and another one melting at 71°C. The crystal and molecular structure of the high melting solid phase have been determined from single crystal X-ray diffraction analysis. Crystals are monoclinic, with cell dimensions a = 16.649(6) Å, b = 8.305(3) Å, c = 24.598(7) Å, β = 111.60(2)?, space group P2₁/c and four molecules in the unit cell. Refinement leads to R = 0.0558. The two terminal alkyl chains and one phenyl ring are disordered over two split positions. The imbricated molecular packing observed in the solid state seems to resemble that of the nematic phase that is formed upon cooling the melt.     

A comparative study of 9,9-bis(4-aminophenyl)fluorene polymers prepared by catalytic and non-catalytic oxidative polymerisation methods

9,9-Bis(4-aminophenyl)fluorene (APF) polymers were synthesized by two different pathways. The different synthetic routes gave polymers with different structures. FT-IR and NMR studies revealed that the catalytic oxidative polymerisation of APF in acetonitrile produced P2, whereas oxidative polymerisation of APF in aqueous alkaline media gave P3. The effects of these different techniques on spectral, thermal, optical, electrical, electrochemical, and morphological properties of resulting polymers were investigated.     

Novel fluorinated polyimides derived from 9,9-bis(4-amino-3,5-difluorophenyl)fluorene and aromatic dianhydrides

Novel fluorinated polyimides (PIs) were prepared from 9,9-bis(4-amino-3,5-difluorophenyl)fluorene with three aromatic dianhydrides via a one-step high-temperature polycondensation procedure. These obtained PIs showed excellent solubility and could be readily soluble in a variety of organic solvents such as NMP, DMAc, DMF, CHCl₃, CH₂Cl₂ and THF. All the PIs could afford flexible and strong films with low dielectric constants (2.62-2.79 at 1 MHz) and low moisture absorptions (0.18-0.41%). Thin films of these PIs exhibited high optical transparency and light color, with the cutoff wavelength at 341-355 nm and transmittance higher than 80% at 450 nm. Meanwhile, these PIs possessed eminent thermal stability, with decomposition temperatures (T_d) above 570 °C in both air and nitrogen atmospheres and glass transition temperatures (T_g) beyond 376 °C. Moreover, these fluorinated PI films showed low surface free energy and hydro-oleophobic character. The contact angles on the films for water and glycerol were in the range of 102.3-107.9° and 94.0-100.3°, respectively. In comparison with the analogous PI non-containing fluorine group, these fluorinated PIs showed better solubility, higher optical transparency, lower dielectric constants and lower surface free energy.     

Synthesis of poly(arylene ether)s based on 9,9-bis(3,5-diphenyl-4-hydroxyphenyl)fluorene

The synthesis of a novel bisphenol, 9,9-bis(3,5-diphenyl-4-hydroxyphenyl)fluorene, in high yield by the transalkylation of 9,9-bis(4-hydroxyphenyl)fluorene is described. Three poly(arylene ether)s based on this hindered phenol were prepared with molecular weights (M_n) ranging from 34 800 to 51 300 and inherent viscosities ranging from 0.27 to 0.43 dL/g. The polymers have T_g's of 236–262°C and did not lose weight below 350°C, with 10% weight loss recorded above 550°C. They are readily soluble in chlorinated solvents such as methylene chloride, chloroform, and 1,2-dichloroethane at room temperature. Attempts to synthesize an analogous monomer, bis (3,5-diphenyl-4-hydroxyphenyl)diphenylmethane, are described.     

Synthesis of acrylate and norbornene polymers with pendant 2,7-bis(diarylamino)fluorene hole-transport groups

New hole-transport monomers have been synthesized in which a 2,7-(diarylamino)fluorene hole-transport functionality is linked through the 9-position of the fluorene bridge to a polymerizable acrylate or norbornene group; these monomers have been polymerized under free-radical and ring-opening metathesis polymerization (ROMP) conditions, respectively. The norbornene monomer has also been copolymerized with a cinnamate-functionalized norbornene; this copolymer can be rendered insoluble through photo-crosslinking of the cinnamate groups under UV irradiation, thus permitting the use of the polymer in organic electronic devices based upon multiple polymer layers. The norbornene monomer has also been copolymerized with dicyclopentadiene to afford insoluble crosslinked films. Time-of-flight studies indicate that the norbornene polymer has a higher hole mobility than the analogous acrylate material, consistent with the predictions of the disorder formalism.     

Organosoluble and light-colored fluorinated polyimides based on 9,9-bis[4-(4-amino-2-trifluoromethylphenoxy)phenyl]fluorene and aromatic dianhydrides

A novel fluorinated diamine monomer, 9,9-bis[4-(4-amino-2-trifluoromethylphenoxy)phenyl]fluorene (II) was prepared via the nucleophilic substitution reaction of 2-chloro-5-nitrobenzotrifluoride with 9,9-bis(4-hydroxyphenyl)fluorene in the presence of potassium carbonate, followed by catalytic reduction with hydrazine and Pd/C. Polyimides V were synthesized from diamine II and various aromatic dianhydrides III _a-f via thermal imidization. These polymers had inherent viscosities ranging from 0.84 to 1.03 dL/g and were soluble in a variety of organic solvents such as NMP, DMAc, DMF, and DMSO, and some could even be dissolved in less polar solvents such as m-cresol, pyridine, and dioxane. Polyimide films V _a-f had tensile strengths of 85–105 MPa, elongations to break of 7–9%, and initial moduli of 2.13–2.42 GPa. The glass transition temperature of these polymers were in the range of 277–331 °C, their 10% weight loss temperatures were in the range of 539–594 °C in nitrogen and above 544 °C in air, and their char yields at 800 °C in nitrogen ranged between 55–65 wt%. Compared with nonfluorinated polyimides VI, V showed better solubility and lower color intensity. Low dielectric constants (2.68–2.85 at 1 MHz) and low moisture absorptions (0.12–0.24 wt%) were also observed. In particular, V _c-f afforded lightly-colored films, which had cutoff wavelengths lower than 385 nm and b* values ranging from 6 to 22.     

Syntheses and properties of aromatic polyamides and polyimides derived from 9,9-bis[4-(p-aminophenoxy)phenyl]fluorene

9,9-Bis[4-(p-aminophenoxy)phenyl]fluorene ( II ) was used as a monomer with various aromatic dicarboxylic acids and tetracarboxylic dianhydrides to synthesize polyamides and polyimides, respectively. The diamine II was derived by a nucleophilic substitution of 9,9-bis(4-hydroxyphenyl)fluorene with p-chloronitrobenzene in the presence of K₂CO₃ and then hydro-reduced. Polyamides IV _a-g having inherent viscosities of 0.73–1.39 dL/g were prepared by the direct polycondensation of the diamine II with various aromatic diacids using triphenyl phosphite and pyridine as condensing agents. All the aromatic polyamides were amorphous and readily soluble in various polar solvents such as N,N-dimethylacetamide, N,N-dimethylformamide, dimethylsulfoxide, and N-methyl-2-pyrrolidone. Transparent and flexible films of these polymers could be cast from the DMAc solutions. These aromatic polyamides had glass transition temperatures in the range of 283–309°C and 10% weight loss occurred up to 460°C. The polyimides were synthesized from diamine II and various aromatic dianhydrides via the two-stage procedure that included ring-opening poly-addition in DMAc to give poly(amic acid)s, followed by thermal or chemical conversion to polyimides. The poly(amic acid)s had inherent viscosities of 0.62–1.78 dL/g, depending on the dianhydrides. Most of the aromatic polyimides obtained by chemical cyclization were found to be soluble in NMP. These polyimides showed almost no weight loss up to 500°C in air or nitrogen atmosphere. © 1993 John Wiley & Sons, Inc.     

Synthesis and Crystal Structure of 2-Nitro-9,9-bis（methylpropionate）fluorine

The title compound of 2-nitro-9,9-bis(methylpropionate)fluorine (C21H21NO6 , Mr=383.39) was synthesized for the first time. Complete assignments were achieved by 1H NMR, IR, EI-MS, elemental analysis and single-crystal X-ray diffraction technique. The crystal belongs to monoclinic, space group P21/c with a=11.4581(15), b=10.3624(14), c=16.573(2) , β=96.629(2) o , V=1954.6(5) 3 , Z=4, Dc=1.303 g/cm 3 , μ=0.096 mm -1 , F(000) = 808, R =0.0493 and wR=0.1499 for 3107 observed reflections with I > 2σ(I). X-ray analysis reveals that three fused rings of the fluorene system are almost coplanar and the two ester groups are nearly perpendicular to the fused-ring system. Weak C-H O hydrogen bonding connects the molecules into centrosymmetric dimmers.     

Synthesis of branched polyimides based on 9,9-bis(4-aminophenyl)fluorene and an oligomeric trianhydride,a 1,3,5-triaminotoluene derivative

A new three-arm reactive oligomer (A3) with three end anhydride groups is prepared via the high-temperature cyclocondensation of 1,3,5-triaminotoluene disulfate with excess 2,2-propylidene-bis(phenyl-4-oxyphthalic acid) dianhydride in molten benzoic acid at 140°C in the presence of [2.2.2]-diazobicyclooctane. A branched polyimide is synthesized via the one-step high-temperature catalytic polycondensation of oligomer A3 with 9,9-bis(4-aminophenyl)fluorene in benzoic acid at 140°C via scheme (A3 + B2) and characterized.     

Synthesis, characterization, and electrochemical and electrical properties of novel mono and ball-type metallophthalocyanines with four 9,9-bis(4-hydroxyphenyl)fluorene

The new mono-nuclear 4-5 and ball-type homo-dinuclear 6 phthalocyanines have been synthesized from the corresponding phthalodinitrile derivative 3. The synthesized compounds have been characterized by elemental analysis, UV-vis, IR,(1)H-NMR and MALDI-TOF-mass spectroscopies. The redox behaviours of the complexes were identified by cyclic voltammetry and square wave voltammetry. The temperature dependence of the electronic properties of compounds and adsorption of SO(2) on thin film of 6 were investigated by conductivity measurements using an interdigital transducer structure on glass substrate. Dc conductivity, measured between 300-475 K, is thermally activated with the activation energy ranging between 0.67 and 0.90 eV. The ac conductivity is found to vary with frequency, ω, as ω(s) in which the frequency exponent s decreases with temperature suggesting a hopping conduction mechanism for all compounds. The SO(2) sensing result showed that the spin coated film of 6 exhibits very good SO(2) sensing properties, fast response and recovery rate, high sensitivity and good repeatability.     

Synthesis, characterization, physical properties, and applications of highly fluorescent pyrene-functionalized 9,9-bis(4-diarylaminophenyl)fluorene in organic light-emitting diodes

A new, highly fluorescent pyrene-functionalized 9,9-bis(4-diarylaminophenyl)fluorene, namely PTF, was synthesized and characterized. This material is an amorphous molecular glass with notably high T_g, is electrochemically stable, and exhibits strong blue emission both in solution and solid state. It shows promising ability as a solution processed blue emitter and hole-transporter for OLEDs. High-efficiency sky-blue and Alq3-based green devices with luminance efficiencies of 1.13 and 4.08 cd/A are achieved, respectively.     

Spacer-dependent structural and physicochemical diversity in copper(II) complexes with salicyloyl hydrazones: a monomer and soluble polymers

Complexation of copper(II) with a series of heterodonor chelating Schiff bases (LL) of salicylic acid hydrazide and aliphatic or cycloaliphatic ketones affords soluble one-dimensional (1D) metallopolymers containing Schiff bases as bridging ligands. Single-crystal X-ray diffraction results reveal nanometer-sized metallopolymeric wires [Cu(μ-LL)(2)](n) with off-axis linkers and a zigzag geometry. Octahedrally coordinated copper centers, exhibiting a Jahn-Teller distortion, are doubly bridged by two Schiff-base molecules in the μ(2)-η(1),η(2) coordination mode. The use of dibutylketone with long alkyl chains as a component for Schiff base formation leads to a distorted square planar monomeric copper(II) complex [Cu(LL)(2)], as evidenced by its X-ray crystal structure. The compounds are characterized by elemental analyses and IR and UV-vis spectroscopy, as well as magnetic susceptibility and cyclic voltammetry measurements. Electrochemical studies on the complexes reveal an existence of polymeric and monomeric forms in solution and the dependence of Cu(II)/Cu(I) reduction potentials on alkyl groups of salicyloyl hydrazone ligands. Polymeric complexes form conducting films on Pt electrodes upon multicycle potential sweeps.     

Synthesis and application of new chiral bidentate phosphine, 2,7-di-tert-butyl-9,9-dimethyl-4,5-bis(methylphenylphosphino)xanthene

New optically active bidentate phosphines, (S,S)- and (R,R)-2,7-di-tert-butyl-9,9-dimethyl-4,5-bis(methylphenylphosphino)xanthenes ((S,S)-1 and (R,R)-1), were prepared through resolution of the corresponding phosphine oxides using (R,R)-(−)-dibenzoyl-tartaric acid and a preliminary experiment on asymmetric synthesis using an allyl substrate proved the utility of the new bidentate phosphines.     

蓝光材料2-叔丁基-9,10-二(9,9-二正丙基芴基)蒽的合成与性能表征

本文设计并合成了一种新型蒽衍生物蓝光材料2-叔丁基-9,10-二(9,9-二正丙基芴基)蒽.化合物中引入的柔性烷基链有效抑制了分子间的相互作用,使该化合物不易结晶,同时提高了化合物在有机溶剂中的溶解度.通过量子力学方法计算发现,化合物具有顺反两种稳定构型,分子的平面性差,能减弱分子间相互作用.化合物在二氯甲烷溶液中的最大荧光发射峰在443 nm,在环己烷溶液中测得荧光量子效率为0.78,固态薄膜的最大发射峰波长相对溶液有少量红移(450 nm).热失重和差热分析结果表明,该化合物具有较高的热稳定性,分解温度和玻璃化转变温度分别为365℃和126℃.     

A versatile synthesis for new 9,10-bis(4-alkoxyphenyl)-2,7-diiodophenanthrenes: useful precursors for conjugated polymers

A practical synthesis for 9,10-bis(alkoxyphenyl)-2,7-diiodophenanthrenes is described. 9,10-Bis(4-hexyloxyphenyl)-2,7-diiodophenanthrene was selectively obtained by a one-pot reaction of 10,10-bis-(4-hexyloxy-phenyl)-2,7-diiodo-10H-phenanthren-9-one with 1 equiv of triethylsilane in trifluoroacetic acid. The target molecular architecture was demonstrated to be a useful precursor for obtaining the corresponding poly(phenanthrene) and poly(phenanthrylene-vinylene).     

Solution‐crystallization and related phenomena in 9,9‐dialkyl‐fluorene polymers. I. Crystalline polymer‐solvent compound formation for poly(9,9‐dioctylfluorene)

Polymer‐solvent compound formation, occurring via co‐crystallization of polymer chains and selected small‐molecular species, is demonstrated for the conjugated polymer poly(9,9‐dioctylfluorene) (PFO) and a range of organic solvents. The resulting crystallization and gelation processes in PFO solutions are studied by differential scanning calorimetry, with X‐ray diffraction providing additional information on the resulting microstructure. It is shown that PFO‐solvent compounds comprise an ultra‐regular molecular‐level arrangement of the semiconducting polymer host and small‐molecular solvent guest. Crystals form following adoption of the planar‐zigzag β‐phase chain conformation, which, due to its geometry, creates periodic cavities that accommodate the ordered inclusion of solvent molecules of matching volume. The findings are formalized in terms of nonequilibrium temperature–composition phase diagrams. The potential applications of these compounds and the new functionalities that they might enable are also discussed. © 2015 The Authors. Journal of Polymer Science Part B: Polymer Physics published by Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1481–1491     

Synthesis and properties of multifunctional poly(amic acid) with oligoaniline and fluorene groups

A novel multifunctional poly(amic acid) bearing oligoaniline, fluorene groups (PAAOF) has been prepared through the one-step synthetic route. The structure of PAAOF was confirmed via nuclear magnetic resonance (NMR), Fourier-transform infrared spectra (FTIR), and gel permeation chromatography (GPC). Moreover, the electrochemical measurement results revealed that PAAOF material have an expected electrochemical activity, and good electrochromic properties with high contrast value and satisfactory coloration efficiency. The photophysical properties of the as-synthesized PAAOF at various oxidation states were studied. The results indicated that the fluorescence of PAAOF could be tuned by modulating the oxidation states of oligoaniline segments. In the fluorescence tuning, the fluorene groups are fluorophore, and the oligoaniline segments are used as regulatory unit.

Synthesis of pentafluorophenyl(meth)acrylate polymers: New precursor polymers for the synthesis of multifunctional materials

Pentafluorophenyl acrylate and -methacrylate were polymerized using AIBN as a thermal initiator. The obtained polymers were soluble polymeric active esters that could be used for the preparation of multifunctional polymers. The reactivity of poly(pentafluorophenylacrylate) and poly(pentafluorophenylmethacrylate) towards primary and secondary amines, as well as alcohols was investigated in a quantitative way. Both poly(active esters) reacted satisfactorily with aliphatic primary and secondary amines but only low conversion was found in the case of aromatic amines. Conversions of only 30% were reached when poly(pentafluorophenylacrylate) was treated with one equivalent of alcohol under base catalysis. In time resolved FT-IR studies the rate constants of the polymer analogous reactions were determined.     

Interfacial polycondensation reactions of the new monomer 1,1′-bis(β -aminoethyl)ferrocene

Condensation polymerizations of several ferrocenecontaining monomers have been investigated, using low temperature interfacial and solution techniques. 1, 1′-bis(β-aminoethyl)ferrocene was synthesized via a 6-step process starting with ferrocene. This monomer was then copolymerized with various aromatic and aliphatic diacid chlorides as well as with diisocyanates, leading to ferrocene-containing polyamides and polyureas having moderately high to low viscosities. Using the interfacial method, film formation occurred for the polyamides. The related monomer 1,1′-bis(β-hydroxyethyl)ferrocene reacted with diacid chlorides and diisocyanates to form ferrocenecontaining polyesters and polyurethanes, respectively, using the solution method. The ferrocenecontaining condensation polymers were characterized by IR spectroscopy and examined for possible liquid crystalline behavior.