顶空气相色谱-质谱联用法测定胶粘剂中的残余单体

建立了一种测定胶黏剂中6种丙烯酸酯和甲基丙烯酸酯类残余单体的分析方法。样品经100 ℃、30 min顶空加热后,通过DB-WAX色谱柱(30 m×0.25 mm×0.25 μm)分离和质谱选择离子模式检测,内标法定量。结果表明,6种残余单体能达到良好的分离,检出限(信噪比为3)为0.069～0.096 mg/kg,定量限(信噪比为10)为0.23～0.32 mg/kg,平均回收率为96.0%～104.6%,相对标准偏差(RSD)小于7.2%。该方法操作简便、准确、重复性好、灵敏度高,可用于胶黏剂中丙烯酸酯和甲基丙烯酸酯类残余单体的快速测定。     

溶解沉淀-顶空气相色谱/质谱法测定丙烯酸树脂中残余单体

建立了丙烯酸树脂中13种残余单体的溶解沉淀-顶空气相色谱/质谱检测方法。丙烯酸树脂样品用N,N-二甲基乙酰胺溶解后加去离子水沉淀,采用VF-624 M S毛细管柱分离。13种残余单体能得到较好的分离,检出限(信噪比为3)为0.13~0.67 mg/kg,定量限(信噪比为10)为0.33~2.01 mg/kg,平均回收率为94.7%~113.4%,相对标准偏差(RSD)小于6%。     

微波辅助萃取-气相色谱质谱法测定丙烯酸树脂中9种残余单体

建立了丙烯酸树脂中9种残余单体(丙烯酸甲酯、丙烯酸乙酯、甲基丙烯酸甲酯、甲基丙烯酸乙酯、丙烯酸丁酯、甲基丙烯酸丁酯、苯乙烯、丙烯酸、甲基丙烯酸)的微波辅助萃取-气相色谱-质谱检测方法。固体丙烯酸树脂样品用乙酸乙酯微波萃取后加甲醇沉淀(液态丙烯酸树脂样品直接用甲醇稀释)后,采用DB-WAX毛细管柱分离。结果表明,本方法在20 min内同时分离了9种单体,所测物质的定量限(LOQ,以信噪比为10计)为3～50 mg/kg(固体树脂)和1～10 mg/kg(液态树脂);在1～500 mg/L范围内,线性相关系数均在0.995以上;在5个添加水平下平均回收率为84.4%～108.6%,相对标准偏差(n=6)为0.27%～4.97%。方法的灵敏度和回收率高、选择性好,能满足实际工作的要求。     

气相色谱-串联质谱法测定人参和黄芪中7种毒杀芬残留量

建立了人参和黄芪中毒杀芬代表性单体残留量的检测方法。选择7种指示性毒杀芬单体为检测品种,样品用环己烷-丙酮(9:1,v/v)加速溶剂萃取法提取,经弗罗里硅土固相萃取柱净化后,以气相色谱-电子轰击离子源串联质谱(GC-EI-MS/MS)在多反应监测(MRM)模式下进行测定。在人参和黄芪两种中药材样品基质,0.005、0.01和0.1 mg/kg 3个加标水平条件下,7种毒杀芬单体的回收率为72.4%～105%,相对标准偏差为0.96%～10.4%;方法的检出限(S/N=3)为0.2～1.7 μg/kg,均符合农药残留检测要求。该方法提取效果好,检测灵敏度高,适用于人参和黄芪中7种毒杀芬残留量的检测。     

气相色谱法测定尼龙12中4种单体

尼龙12样品(0.100g)用六氟异丙醇1.0mL在45℃溶解3h。冷却后,移取上述溶液0.10mL,加入乙酸乙酯2.0g,密闭摇匀,静置2h,取上层液体经过0.45μm亲水聚四氟乙烯针式过滤器。采用气相色谱法测定滤液中4种单体的含量。4种单体用RXI~(-1)7色谱柱(30 m×0.25mm,0.25μm)分离,氢火焰离子化检测器检测。4种单体的质量浓度均在2.0～200.0mg·L~(-1)内与其对应的峰面积呈线性关系,检出限(3S/N)为0.7～2.0mg·L~(-1)。方法用于尼龙12样品的分析,加标回收率为93.7%～115%,测定值的相对标准偏差(n=6)为1.5%～3.2%。     

高效液相色谱-电感耦合等离子质谱法分析水产品中有机锡的形态

建立了水产品中三甲基锡(TMT)、一丁基锡(MBT)、二丁基锡(DBT)、三丁基锡(TBT)、一苯基锡(MPhT)、二苯基锡(DPhT)、三苯基锡(TPhT)7种有机锡化合物的高效液相色谱-电感耦合等离子体质谱(HPLC-ICP-MS)的分离检测方法.方法利用Eclipse Plus C18反相色谱柱对水产品中7种有机锡化合物进行分离,利用电感耦合等离子体质谱对锡元素进行检测,外标法定量测定水产品中7种有机锡化合物的含量.研究采用30 mL 30％乙酸-甲醇提取液(V/V),低温超声萃取10 min后离心3 min,取上清液20 mL浓缩,用流动相定容至2 mL,以乙酸(0.2％三乙胺,V/V)-甲醇溶液为流动相,梯度洗脱,7种有机锡化合物在30 min内得到了有效分离.7种有机锡化合物标准曲线的线性相关系数大于0.995,检出限0.11 ～0.60 μg/kg.此前处理方法样品加标回收率为72.1％～ 111.7％.本方法操作简便,分离效果好,检出限低,适用于水产品中有机锡的检测.     

超高效液相色谱-串联质谱法快速测定蔬菜中7种氨基甲酸酯类农药残留

采用超高效液相色谱-串联质谱联用(UPLC-MS/MS)技术建立了同时检测蔬菜中7种氨基甲酸酯类农药多残留量的快速检测方法。样品经乙腈提取,氨基固相萃取柱净化,WatersC18超高效液相色谱柱分离,进入电喷雾串联四极杆质谱进行检测,采用多反应监测(MRM)分析,对液质分离条件和样品前处理条件进行了优化。结果表明7种氨基甲酸酯类农药在2～500μg/L范围内线性良好(r≥0.9986)。在0.005～0.01mg/kg范围内,平均加标回收率在72.4%～112.1%之间;相对标准偏差小于13%。该方法检出限范围为1.31～3.72μg/L,测定结果满足多残留农残的检测要求。     

离子色谱法测定瓶装水中阴离子

采用离子色谱法测定瓶装水中7种阴离子的含量。水样经Ion Pac AG14保护柱及IonPac AS14分离柱分离,以3.5mmol·L~(-1)碳酸钠-1.0mmol·L~(-1)碳酸氢钠溶液为淋洗液,采用抑制电导器检测。F~-和PO_4~(3-)分别在0.05～1.20mg·L~(-1)和0.80～3.00mg·L~(-1)范围内,Cl~-、NO_2~-、Br~-、NO_3~-和SO_4~(2-)均在0.20～4.80mg·L~(-1)范围内呈线性关系,检出限(3S/N)在0.025～0.126mg·L~(-1)之间。方法用于瓶装水中7种阴离子的测定,加标回收率在92.8%～102.0%之间,相对标准偏差(n=7)均小于4.0%。     

RP-HPLC法分析芡种壳提取物中单体酚组成

建立了一种反相高效液相色谱法分离10种单体酚的方法,并用于芡种壳提取物中单体酚含量分析。采用C18反相色谱柱、紫外检测器、以V(甲醇):V(1%乙酸)=3:7为流动相,在280 nm下,可同时分离10种单体酚物质,加样回收率95.3%~101.3%,相对标准偏差在2.1%以下,回归方程在2.5~125 mg/L范围内线性良好。方法可分离芡种壳提取物酸处理产物中的单体酚以及绿茶50%乙醇提取物中的单体酚。结果显示,芡种壳提取物中富含芦丁、没食子酸和儿茶素类物质。经适度酸处理后,芡种壳提取物A,B,C和D中的芦丁含量呈数倍增加,从72.6,22.8,22.4和9.2 mg/g分别增至297.7,387.2,225.9和141.4 mg/g。     

聚合物整体柱微萃取-毛细管电泳法测定食品中植物激素

采用甲基丙烯酸(MAA)为单体,乙二醇二甲基丙烯酸酯(EDMA)为交联剂,制备了聚合物整体柱,与高效毛细管电泳技术联用,建立了2-萘氧乙酸、1-萘乙酸、3-吲哚乙酸、3-吲哚丁酸以及6-苄氨基嘌呤五种植物激素的整体柱微萃取与分离检测方法。考察了整体柱各种微萃取条件(萃取流速、萃取体积、样品基质pH值),并优化了毛细管电泳分离条件。结果表明,在最佳条件下,五种植物激素在0.2～100 mg·L~(-1)浓度范围内均呈现良好的线性关系,相关系数R~2值均大于0.9916,检测限为0.01～0.02 mg·L~(-1),平均回收率为87.3%～107.4%,相对标准偏差(RSD)≤3.82%。该方法简便、快速,适用于实际样品中五种植物激素的分离分析。     

Determination of residual (free) monomer in water based polymer emulsions by head space gas chromatography mass spectrometry

A method for determination of residual acrylonitrile, methyl acrylate, ethyl acrylate, methyl methacrylate, ethyl methacrylate, butyl acrylate, butyl methacrylate, 2-ethyl hexyl acrylate, styrene and 2-methyl styrene monomers in polymer emulsions by head space gas chromatography mass spectrometry. Monomers were separated on DB-624 column and detected by MS under SIM (Selected ion monitoring) mode. The linear regression analysis data for the calibration curve for all monomers showed a good linear relationship with a regression coefficient of 0.99 over the concentration range of 5.3 mg/kg to 1172 mg/kg. The limit of detection and limit of quantification for the target analytes were in the range from 0.4 to 2.9 mg/kg and 0.9 to 7.3 mg/kg respectively.     

Volumetric Properties of Ethylbenzene with Ethyl Acrylate,Butyl Acrylate,Methyl Methacrylate,and Styrene at 298.15 K

Densities of the binary systems of ethylbenzene with ethyl acrylate, butyl acrylate, methyl methacrylate, and styrene have been measured as a function of the composition, at 298.15 K and atmospheric pressure, using an Anton Paar DMA 5000 oscillating U-tube densitometer. The calculated excess volumes were correlated with the Redlich-Kister equation and with a series of Legendre polynomials. The excess volumes are positive for the systems ethylbenzene + (methyl methacrylate, ethyl acrylate) and negative for the systems ethylbenzene + (butyl acrylate, styrene).     

Tricarbonylchromium complexes of styrenes in radical copolymerization

The organometallic monomers styrenetricarbonylchromium and p‐methylstyrenetricarbonylchromium were copolymerized in ethyl acetate solutions with methyl methacrylate and butyl acrylate using azobisisobutyronitrile at 50 °C and a binary system including di‐tert‐butylperoxytriphenylantimony at 30 °C as the free‐radical initiators. Comonomers are proposed to form a molecular complex based on the results of ultraviolet and electron spin resonance spectroscopy. A kinetic study shows that chromium‐containing monomers at high concentrations in the mixture reduce the rate of copolymerization. The addition of styrenetricarbonylchromium to butyl acrylate significantly slows down the autoacceleration. The reactivity ratios of the comonomer pairs, namely, styrenetricarbonylchromium–methyl methacrylate, styrenetricarbonylchromium–butyl acrylate and p‐methylstyrenetricarbonylchromium–methyl methacrylate, were determined using the method of Kelen–Tudos for low conversion polymerizations.Copyright © 2001 John Wiley & Sons, Ltd.     

Volumetric Properties of Toluene with Ethyl Acrylate, Butyl Acrylate, Methyl Methacrylate, and Styrene at 25°C

Densities of the binary systems of toluene with ethyl acrylate, butyl acrylate, methyl methacrylate, and styrene have been measured as a function of the composition, at 25°C and atmospheric pressure, using an Anton Paar DMA 5000 oscillating U-tube densitometer. The calculated excess volumes were correlated with the Redlich–Kister equation and with a series of Legendre polynomials. The excess volumes are negative for systems toluene + (ethyl acrylate, butyl acrylate, and styrene) and positive for the system toluene + methyl methacrylate.     

丙烯酸酯和甲基丙烯酸酯基团转移共聚研究

研究了三种丙烯酸酯分别和四种甲基丙烯酸酯的基团转移共聚，用１Ｈ ＮＭＲ法测定共聚物组成，扩展的Ｋｅｌｅｎ Ｔｕｄｏｓ法测定竞聚率，结果为γＭＡ＝９２３、γＭＭＡ＝００６；γＥＡ＝１４１５、γＭＭＡ＝００１；γＢＡ＝７５１、γＭＭＡ＝００２；γＭＡ＝１４４１、γＥＭＡ＝００１；γＭＡ＝１３９６、γＢＭＡ＝０２３；γＭＡ＝８６６、γｉ ＢＭＡ＝００８，表明基团转移聚合同阴离子聚合有明显的相似之处．     

Synthesis and polymerization of phosphorus‐containing acrylates

Novel phosphorus‐containing acrylate monomers were synthesized by two different routes. The first involved the reaction of ethyl α‐chloromethyl acrylate and t‐butyl α‐bromomethyl acrylate with diethylphosphonoacetic acid. The monomers were bulk‐ and solution‐polymerized at 56–64 °C with 2,2′‐azobisisobutyronitrile. The ethyl ester monomer showed a high crosslinking tendency under these conditions. The selective hydrolysis of the ethyl ester phosphonic ester compound was carried out with trimethylsilyl bromide, producing a phosphonic acid monomer. In the second route, ethyl α‐hydroxymethyl acrylate and t‐butyl α‐hydroxymethyl acrylate were reacted with diethylchlorophosphate. The bulk homopolymerization and copolymerization of these monomers with methyl methacrylate and 2,2′‐azobisisobutyronitrile gave soluble polymers. The attempted hydrolysis of the monomers was unsuccessful because of the loss of the diethylphosphate group. The relative reactivities of the monomers in the photopolymerizations were also compared. The ethyl α‐hydroxymethyl acrylate/diethylphosphonic acid monomer showed higher reactivity than the other monomers, which may explain the crosslinking during the polymerization of this monomer. The reactivities of other derivatives were similar, but the rates of polymerization were slow in comparison with those of methyl methacrylate. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3221–3231, 2002     

含疏水链节的聚N-异丙基丙烯酰胺共聚物的温敏性

采用溶液聚合法合成了一系列N-异丙基丙烯酰胺(NIPAM)与甲基丙烯酸甲酯、丙烯酸乙酯、丙烯酸丁酯或甲基丙烯酸丁酯的无规共聚物,用浊度观测法和光散射法测定了不同共聚物水溶液的温敏相转变行为.结果表明:所得共聚物的低临界溶解温度(LCST)均低于均聚物PNIPAM的,酯类单体的结构和含量对共聚物的LCST有显著影响,其中酯基上的烷基对共聚物LCST的影响能力大于丙烯酸酯α位上的烷基,前者对增大共聚物的疏水性有更大贡献.通过NIPAM与特定丙烯酸酯单体进行无规共聚可以合成转变温度低于PNIPAM均聚物且具有预设LCST数值的水溶性温敏聚合物.     

Liquid chromatography of polymer mixtures applying a combination of exclusion and full adsorption mechanisms. 5. Six-component blends of chemically similar polymers

The separation of six-component blends of chemically similar homopolymers utilising the full adsorption-desorption (FAD) process is presented. The main advantage of the FAD approach over other methods represents the successive and independent size- exclusion chromatography (SEC) characterisation of all blend components. The method is based on the full adsorption and retention of all n or n−1 components of the polymer blend from an adsorption promoting liquid (ADSORLI) in a small FAD column. Nonadsorbed macromolecules are forwarded directly into SEC for molecular characterisation. Next, appropriate displacers are successively applied to the FAD column to selectively release preadsorbed blend constituents into the on-line SEC column. Dynamic integral desorption isotherms for single constituents, as well as for polymer blends to be analysed, allow identification of optimal displacer compositions to release just one kind of macromolecule. Model polymer blends containing polystyrene (PS), poly(lauryl methacrylate), poly(butyl methacrylate), poly(ethyl methacrylate), poly(methyl methacrylate) and poly(ethylene oxide) (PEO) or, alternatively, PS, poly(2-ethylhexyl acrylate), poly(butyl acrylate), poly(ethyl acrylate), poly(methyl acrylate) and PEO of similar molar masses can be separated and characterised in one multistep run using nonporous silica FAD packing, toluene as an ADSORLI and its mixtures with a desorption promoting liquid such as ethyl acetate, tetrahydrofuran or dimetylformamide to form displacers with appropriate desorption strength. Received: 9 September 1998 Accepted in revised form: 16 November 1998