Quantitation in miniaturized GC and SFC systems

Separations of high efficiency and/or speed can be achieved in capillary GC by capillary columns of lower internal diameter (< 50 μm). Sampling techniques for the analytical application of narrow bore fused silica columns have been evaluated with regard to quantitation. On-column injection cannot be applied. Therefore liquid samples have to be vaporized in external devices before they enter the chromatographic system. Sample introduction by syringe with subsequent splitting must and can be applied but requires special syringes with perfect piston sealing because of the high inlet pressures needed even with hydrogen as carrier gas. For general analytical applications, valve systems should be developed to eliminate both the syringe and the septum from instrumental GC set-up's. In SFC using either narrow bore capillary or packed microbore columns, time-controlled valve sampling with partial displacement of the sample from the loop seems to be an adequate technique because of the very high inlet pressures involved. Splitting in combination with valve operation can also be applied in capillary SFC at least to samples of good solubility in the mobile phase. A disadvantage of splitting in SFC is that another restriction for the adjustment of the split flow is necessary.     

How the capillary burst microvalve works

The capillary burst microvalve offers an attractive means to regulate microliquid flow owing to its simple structure and operation process. However, there existed no rigorous theoretical work to elucidate how the valve works and consequently to predict the valve-bursting condition. Therefore, here we report the theoretical investigation of how the capillary burst valve can stop the advancing liquid meniscus and when it bursts. We confirm our theory with experiments using a centrifugal microfluidic valve system fabricated by soft lithography.     

On-line analysis of products from hydrogenation of carbon monoxide by capillary gas chromatography with thermal conductivity detection

A combination of thermal conductivity detectors with capillary columns is used for on-line analysis of the products from a micropolit plant for the study of carbon monoxide hydrogenation. The system includes an automatically operated heated tenport sampling valve, a HP-5890-A gas chromatograph fitted with two capillary columns and thermal conductivity detectors, and a logging/controlling system. The single column design means that two analyses can be done simultaneously in one chromatograph and offers high versatility with the possibility of combining different capillary columns to cope with the needs of variable process conditions and catalyst selectivities.     

A new sequential injection analysis‐capillary electrophoresis system with amperometric detection

A novel and fully automated sequential injection analysis manifold coupled to a capillary electrophoresis apparatus with amperometric detection, is described. The sequential injection manifold was isolated from the high voltage by inserting an air plug into the circuit. Small buffer reservoirs were used to avoid the need to pump fresh buffer to the interface during the electrophoretic separation. No decoupling device was used to mitigate the interference from the high voltage electric field, instead the potential shift induced by the separation voltage, was accounted for. The new hydrodynamic injection method presented is based on the overpressure created in the circuit when a pinch valve is closed for a predetermined time. The injection method yields RSD values of peak height and area below 2.55 and 1.82%, respectively, at different durations of valve closure (n = 5). The capillary and working electrode alignment was achieved by adapting a commercial available capillary union. When the electrode was replaced, the alignment method proved to be very reliable, yielding RSD values of peak height and area lower than 2.64 and 2.08%, respectively (n = 8). Using this system with a gold microelectrode, dopamine, and epinephrine could be quantified within the concentration range of 1–500 μM and detected at a concentration of 0.3 μM. The methods here presented could be applied for the development of new capillary electrophoresis systems with amperometric detection and/or to the design of fully automated systems for online process monitoring purposes.     

Single‐step CE for miniaturized and easy‐to‐use system

We developed a novel single‐step capillary electrophoresis (SSCE) scheme for miniaturized and easy to use system by using a microchannel chip, which was made from the hydrophilic material polymethyl methacrylate (PMMA), equipped with a capillary stop valve. Taking the surface tension property of liquids into consideration, the capillary effect was used to introduce liquids and control capillary stop valves in a partial barrier structure in the wall of the microchannel. Through the combined action of stop valves and air vents, both sample plug formation for electrophoresis and sample injection into a separation channel were successfully performed in a single step. To optimize SSCE, different stop valve structures were evaluated using actual microchannel chips and the finite element method with the level set method. A partial barrier structure at the bottom of the channel functioned efficiently as a stop valve. The stability of stop valve was confirmed by a shock test, which was performed by dropping the microchannel chip to a floor. Sample plug deformation could be reduced by minimizing the size of the side partial barrier. By dissolving hydroxyl ethyl cellulose and using it as the sample solution, the EOF and adsorption of the sample into the PMMA microchannel were successfully reduced. Using this method, a 100‐bp DNA ladder was concentrated; good separation was observed within 1 min. At a separation length of 5 mm, the signal was approximately 20‐fold higher than a signal of original sample solution by field‐amplified sample stacking effect. All operations, including liquid introduction and sample separation, can be completed within 2 min by using the SSCE scheme.     

Loop-type interface for concurrent solvent evaporation in coupled HPLC-GC. Analysis of raspberry ketone in a raspberry sauce as an example

Presently, two coupling techniques are used for directly introducing HPLC fractions into capillary GC: The retention gap technique (involving negligible or partially concurrent solvent evaporation) and fully concurrent solvent evaporation. While the former involves use of a conventional on-column injector, it is now proposed that concurrent solvent evaporation technique be carried out using a switching valve with a built-in sample loop. The technique is based on the concept that the carrier gas pushes the HPLC eluent into the GC capillary against its own vapor pressure, generated by a column temperature slightly exceeding the solvent boiling point at the carrier gas inlet pressure. Further improvement of the technique is achieved by flow regulation of the carrier gas (accelerated solvent evaporation) and backflushing of the sample valve (improved solvent peak shape). Concurrent solvent evaporation using the loop-type interface is easy to handle, allows transfer of very large volumes of HPLC eluent (exceeding 1 ml), and renders solvent evaporation very efficient, allowing discharge of the vapors of 1 ml of solvent through the column within 5–10 min.     

气相色谱法测定乙二醇生产中无机气体成分

煤制乙二醇工艺过程中,需要测定生产过程中的无机气体成分,对工艺生产作出指导.采用气相色谱法,通过一个十通阀和一个六通阀,HN填充柱与毛细管色谱柱HP-MOLESIEVE组合,经过多次实验探究优化,最终确立了高纯氩气为载气,配备恒温外置小柱箱,柱箱采用程序升温,最优的切换十通阀、六通阀时间,实现了一次性测定样品气中二氧化...     

In-tube solid phase microextraction using a beta-cyclodextrin coated capillary coupled to high performance liquid chromatography for determination of non-steroidal anti-inflammatory drugs in urine samples

A configuration of in-tube solid-phase microextraction (SPME) coupled to HPLC was constructed by using a pump and a six-port valve combined with a PEEK tube as the pre-extraction segment. The extraction capillary was fixed directly on the HPLC six-port valve to substitute for the sample loop. The whole system could be handled easily to perform accurate on-line extraction, and the possible inaccurate quantification caused by sample/mobile phase mixing when using an autosampler could be eliminated.A β-cyclodextrin coated capillary, prepared by sol-gel method, was used as the extraction capillary for in-tube SPME. Three non-steroidal anti-inflammatory drugs, ketoprofen, fenbufen and ibuprofen, were employed to evaluate the extraction performance of the capillary. After optimizing the extraction conditions, satisfactory extraction efficiency was obtained and detection limits for ketoprofen, fenbufen and ibuprofen in diluted urine samples were 38, 18 and 28 ng/mL, respectively. The extraction reproducibility was evaluated with intra-day and inter-day precision, and the R.S.D.s obtained were lower than 4.9 and 6.9%, respectively. The capillary was proved to be reusable and the extraction efficiency did not decrease after 250 extractions.     

气相色谱法分析高纯异丁烯中的微量烃类杂质

采用HP Al2O3/S PLOT(50 m×0.32 mm i.d.×8 μ m) 毛细管色谱柱对高纯异丁烯中的微量烃类杂质进行了气相色谱方法研究。结果表明,该色谱柱能很好地分离异丁烯中的C1~C4烃类杂质;采用液相进样阀液态直接进样,保证样品不失真,所测定的结果有良好的准确度和精密度。     

Application of capillary gas chromatography to automated on-line quantitative analysis of solvent vapors

Solvent vapors in air may be measured with capillary gas chromatographic columns. By using large diameter columns and sample loops of approximately the same internal diameter, the column may be connected directly to the gas sampling valve. This approach eliminates the use of a splitter or cryogenic trapping and allows low levels to be measured. By operating the column at high velocity, column efficiency is sacrificed for increase in speed.     

固化pH梯度毛细管等电聚焦整体柱的制备及在蛋白质等电点分析中的应用

通过聚合物原位聚合反应，制备了部分填充的毛细管整体柱。pH 3~10的载体两性电解质被固化在该毛细管整体柱上。在引入八通进样阀、三通阀和四通连接单元的基础上，构建了适用于固化pH梯度毛细管等电聚焦整体柱（M-IPG）的平台。在蛋白质药物测定过程中，用M-IPG柱和羟丙基纤维素（HPC）涂层毛细管柱同时对曲托珠单抗和依那西谱的等电点进行了测定。结果表明，两种等电聚焦柱都能够同时分离混合蛋白质样品并测定蛋白质类药物中单抗和融合蛋白质的等电点（pI），M-IPG柱所测的pI值与HPC涂层毛细管柱测定的结果基本一致，表明了该柱在进一步构建多维分离平台进行蛋白质组学研究方面的潜力。     

Comparison of two-stage retention index monitoring capillary gas chromatography and selected ion monitoring capillary gas chromatography – mass spectrometry as analytical tools

Two-stage capillary GC with two-stage retention index monitoring is an efficient analytical technique which can be used for detection and determination of small amounts of volatile compounds in complex mixtures of hundreds or thousands of other compounds. The system employs two capillary columns, coated with different stationary phases, connected on-line with the aid of a micro valve; the first column acts as a pre-separating unit from which unresolved fractions of interest are cut (transferred) into another column for final, interference-free separation of the compounds to be determined. This technique has been compared with selected ion monitoring capillary GC-MS using a hydrocarbon mixture as a test sample for comparing resolution, repeatability, and the practical usefulness of the techniques. Results indicate that two-stage capillary GC is very useful for mixtures containing compounds which produce mostly non-specific ions in the MS ion source whereas compounds producing specific ions can be easily analyzed by capillary GC – single ion monitoring MS even if they are not perfectly separated by a single capillary column.     

Coupling of sequential injection analysis and capillary electrophoresis - Laser-induced fluorescence via a valve interface for on-line derivatization and analysis of amino acids and peptides

The on-line coupling of sequential injection analysis (SIA) and capillary electrophoresis (CE) via an in-line injection valve is presented. The SIA system is used for automated derivatization of amino acids and peptides. Dichlorotriazinylaminofluorescein serves as the derivatization agent, thus enabling sensitive laser-induced fluorescence detection of the derivatized analytes. The SIA procedure includes the following steps: (a) introduction of reagent and sample zones in a holding coil, (b) sample and reagent mixing in a reaction coil, (c) stop-flow step for increase of the reaction time, and (d) delivery of derivatized sample into the loop of the micro-valve interface. A small portion of the analyte zone is introduced electrokinetically in the separation capillary via the valve interface and CE analysis is performed. Factors affecting the CE separation, such as pH, the borate and sodium dodecyl sulphate concentration of the background electrolyte have been optimized. The derivatization conditions have been studied to obtain a high reaction yield in a relative short time. The transfer of a part of the reaction plug into the loop of the valve interface has been optimized. Using des-Tyr(1)-[Met]-enkephalinamide as test compound, it is demonstrated that after automated derivatization, on-line electrophoretic analysis could be achieved. Glycine has been selected as the internal standard in order to correct for variations in reaction time and filling of the injection loop. For the enkephalin, good reproducibility (RSD<4.5% calculated by the ratio of the peak areas) and linearity (0.5-5 microg mL(-1), R(2)>or=0.994) are obtained with a detection limit of 30 ng mL(-1) (S/N=3).     

Polymer-coated synthetic fibers designed for miniaturized sample preparation process

Miniaturized sample preparation technique for complex sample matrices has been developed with a polymer-coated fibrous extraction medium. Several hundreds of fine fibrous materials were packed longitudinally into a fused-silica capillary followed by a polymeric coating on it to prepare the extraction capillary. The extraction capillary was installed in a liquid chromatograph as a sample loop of the injection valve. The on-line coupled sample preparation/separation system demonstrated a good validity for the analysis of phthalates in real river and wastewater samples. The lowest limits of quantification for several phthalates were less than 1 ng/ml. The effect of polymeric coating to the filaments on the extraction power was also investigated.     

Development of miniaturized sample preparation with fibrous extraction media

Introducing fine polymeric filaments as the extraction medium, a miniaturized sample preparation technique for micro-column liquid chromatography (micro-LC) has been developed along with the investigation of a reproducible preparation scheme of the extraction capillary. The polymeric filaments were packed longitudinally into either a fused-silica capillary or a polyether ether ketone (PEEK) capillary of appropriate dimensions, and the extraction capillary was installed to the injection valve in micro-LC system. The number of packed filaments should be precisely counted before the packing process to make sure the reproducible preparation of the extraction capillary. With conventional stationary phase materials for open-tubular gas chromatography, polymeric coating to the surface of the filaments was also studied in order to further enhance the extraction performance and selectivity. Coated with the polymeric material suitable for the extraction of particular analyte, a dramatic improvement on the extraction power was obtained. The results suggest that the future possibility of novel tailored fibrous extraction medium with an appropriate coating on it, especially for the analysis of complex sample matrices.     

The use of multidimensional capillary chromatography in conjunction with a triple quadropule mass-spectrometer in the analysis of complex mixtures (GC-GC-MS-MS)

The analysis of complex mixtures, such as essential oils requires high resolution chromatographic separation and even the use of very efficient columns cannot prevent the overlapping of certain peaks. This means that it is very difficult to obtain high quality mass spectra when the sample contains numerous constituants. The pre-separation by column or preparative GC leads to a considerable loss of material and, often, to the formation of artefacts. In order to overcome some of these difficulties, we have built a simple multi-column system that is connected to an MS-MS instrument. Two independent chromatographs equipped with capillary columns were connected. The interface, which consists of a modified PTV injector, gives the possibilities of direct transfer, back-flushing, heart-cutting, intermediate cold trapping, trace enrichment and selective sample introduction. These operations are controlled by a switching valve system (DANI-MFC 393 unit). The chromatographic system was first connected to a MS-MS instrument which may result in high MS and collision activated MS spectra.     

A flow injection-capillary electrophoresis system with high-voltage contactless conductivity detection for automated dual opposite end injection

The system comprises two flow injection-capillary electrophoresis interfaces into which the opposite ends of the separation capillary are inserted. The electrolyte solution flows through both interfaces by use of hydrostatic pressure. The injection of the samples into the electrolyte flow is accomplished by a rotary-type chromatographic valve at the grounded side and by a pinch-valve injector at the high-voltage side that provides sufficient isolation from the high electric field. The system allows a fully automated dual-injection sequence of samples from both capillary ends and simultaneous electrophoretic separation of anions and cations in the samples. The analytes are detected by a high-voltage contactless conductometric detector positioned approximately in the middle of the separation capillary. The parameters of the system were evaluated. The repeatability of the flow injection-capillary electrophoresis system for the simultaneous determination of anions and cations was evaluated for ten consecutive injections and relative standard deviation (RSD) values for peak areas were better than 1.0%. The sample throughput for total ionic analysis was estimated to be 25 samples per hour. The system was used for automated simultaneous analysis of anions and cations in various real samples. Using a short separation capillary, rapid total ionic analysis in less then 1 min is demonstrated.     

Capillary electrophoresis with contactless conductivity detection coupled to a sequential injection analysis manifold for extended automated monitoring applications

A capillary electrophoresis (CE) instrument with capacitively coupled contactless conductivity detection (C⁴D) based on a sequential injection analysis (SIA) manifold was refined. Hydrodynamic injection was implemented to avoid a sampling bias by using a split-injection device based on a needle valve for precise adjustment. For safety and reliability, the integrity of the high voltage compartment at the detection end was fully maintained by implementing flushing of the high voltage interface through the capillary. With this set-up, extended fully automated monitoring applications are possible. The system was successfully tested in the field for the determination of the concentration levels of major inorganic cations and anions in a creek over a period of 5 days.     

Split-flow injector for capillary zone electrophoresis

A simple construction of a split-flow injector eliminating some common problems connected with the use of such devices is described. It consists of a low-pressure pump, an injection valve and a delivery tube in which the separating capillary inlet is fixed. The sample is injected without moving the separating capillary inlet and without interrupting the applied voltage. The grounded electrophoretic electrode is close to the injection valve so that all metal parts of the injector are kept at a sufficiently low potential. Minimum length and small internal diameter of delivery tube minimizes additional sample zone broadening. The effects of some experimental parameters, such as the position of the separation capillary inlet with respect to the background solution flow direction and background solution flow-rate are experimentally studied. The injector was tested primarily for the electrokinetic injection.     

Capillary supercritical fluid chromatography with flame photometric detection using a large bore column SFC pumping system

A commercially available instrument with an SFC pumping system suitable for wide bore columns (4.6 mm i.d.) has been modified for capillary supercritical fluid chromatography (CSFC) by incorporating a double-stage flow splitter. The first flow splitter was installed in front of the sample injection valve in order to avoid a high solute split ratio. The second splitter was mounted in the column oven so that the injected sample (0.2 μL) would be split to the capillary column. In order to perform pressure programmed elution, a pressure regulating system equipped with a gradient programmer has been used. Flame photometric detection was optimized for the analysis of organosulfur compounds by CSFC. In this study, detection limits were found to be 6–14 ng and the experimentally determined exponent (n value) varied from 1.721 to 1.984 depending on the compounds tested. Sulfur- and phosphorus-containing thermally labile pesticides can be chromatographed and selectively detected by using CSFC/FPD in either sulfur- or phosphorus mode, respectively.