Surface‐Confined Electropolymerization of Methylene Blue on Gold Electrodes

We report on the electrochemical behaviour and electropolymerization of self‐assembled monolayers (SAMs) of methylene blue (MB) on gold electrodes. The SAMs of MB on gold electrodes were prepared by immersing the substrates into a solution of 1.0 mM MB in absolute ethanol for different times at room temperature. Cyclic voltammetry experiments exhibited that reductive desorption of MB monolayer takes place at three different potentials on polycrystalline gold electrodes, while reductive desorption of MB monolayer consists of only one peak on single crystal Au(111) substrates. Calculated charge densities for different immersion times indicated that optimal immersion time for self‐assembly of MB is 96 h. Electropolymerization of SAMs of MB on gold electrode was achieved by applying 0.95 V for 1 s in 0.1 M borate buffer solution (pH: 9.0). It was observed that poly(MB) monolayers are highly stable in acidic media. ATR‐FTIR and UV‐vis spectra exhibited differences between monomer and polymer monolayers, which are attributed to surface‐confined electropolymerization. STM image of poly(MB) monolayer on Au(111) substrate revealed a surface that is covered by well‐ordered, collateral nanowires with an average size of 3 nm.     

Characterisation of poly(neutral red) modified carbon film electrodes; application as a redox mediator for biosensors

The polymer redox mediator, poly(neutral red) (PNR), has been synthesised and characterised electrochemically to investigate the best electropolymerisation and mediation conditions for application in enzyme biosensors and to clarify the mechanism of action. Neutral red was electropolymerised by potential cycling on carbon film electrode substrates by allowing the monomer to be oxidised during the full 20 cycles of polymerisation or reducing the positive limit of the potential window after the first 2 cycles to impede monomer oxidation with a view to obtaining longer polymer chains and a lesser degree of branching. Comparison was made with glassy carbon substrates. The PNR films on carbon film electrodes were characterised using cyclic voltammetry and electrochemical impedance spectroscopy, as well as in glucose biosensors prepared with PNR. Glucose oxidase enzyme was immobilised by encapsulation in silica sol-gel and compared with that obtained by cross-linking with glutaraldehyde. The biosensors were evaluated by chronoamperometry in 0.1 M phosphate buffer saline solution, pH 7.0, and showed evidence of electron transfer between the enzyme cofactor flavin adenine dinucleotide and PNR dissolved in the enzyme layer competing with PNR-mediated electrochemical degradation of H₂O₂ formed during the enzymatic process. This paper is dedicated to Professor Dr. Algirdas Vaskelis on the occasion of his 70th birthday.     

Effect of thickness on the capacitive behavior and stability of ultrathin polyaniline for high speed super capacitors

In this work four polyaniline (PANI) film electrode with different thickness were synthesized by electrochemical method on the surface of glassy carbon (GC) electrode. Four polymer films with various thicknesses from 0.5 to 11 μm were synthesized. Electropolymerization occurs in low monomer concentration. Morphology study of electrode shows that surface structure of polymers depends on film thickness. Capacitance of electrode was studied by CV and charge-discharge (CD) methods. Specific capacitance (SC) of electrodes using cyclic voltammetry were calculated 620, 247 F g^–1 for thinnest and thickest polymer film, respectively. Stability of electrodes was studied during 1000 voltammogram cycles. Results show that with the increase of thickness the stability of electrodes enhanced and reach to a maximum and then decreased.     

超氧自由基电化学发生体系的研究

超氧自由基是人体内氧代谢的重要产物 [1 ] .迄今为止 ,超氧自由基的研究方法有电子自旋共振法、光度法和电化学法等 [2～ 5] .其中 ,通过电化学还原氧产生超氧自由基是一种简便快捷的方法 [6,7] .本文使用长链表面活性剂 DSAB作为疏水分子 ,比较了强碱性介质中氧在汞电极和 4种非汞电极上的电化学还原行为 ,建立了超氧自由基在非汞电极 (铂电极 )上电化学发生新体系 .通过石英晶体微天平和计时电量法进一步证实了超氧自由基的产生 ,并用循环伏安法比较了抗坏血酸和半胱氨酸两种抗氧化剂对超氧自由基的清除能力 .1　实验部分1.1　试剂与仪…     

Electorchemical Studies of Cytochrome c on Electodes Modified by Single—Wall Carbon Naotubes

Single-wall carbon nanotubes(SWNTs) modified gold electrodes were prepared by using two different methods.The electrochemical behavior of cytochrome c on the modified gold electrodes was investigated.The first kind of SWNT-modified electrode (noted as SWNT/Au electrode)was prepared by the adsorption of carboxylterminated SWNTs from DMF dispersion on the gold electrode.The oxidatively processed SWNT tips were covalently modified by coupling with amines (AET) to form amide linkage.Via Au-S chemical bonding,the self-assembled monolayer of thiol-unctionalized nanotubes on gold surface was fabricated so as to prepare the others SWNT-modified electrode (noted as SWNT/AET/Au electrode).It was shown from cyclic voltammetry cxperiments that cytochrome c exhibited direct electrochemical responses on the both electrodes, but only the current of controlled diffusion existed on the SWNT/Au electrode while both the currents of controlled diffusion and adsorption of cytochrome c occurred on the SWNT/AET/Au electrode.Photoelastic Modulation Infared Reflection Absorpthion Spectroscopy (PEM-IRRAS) and Quartz Crystal Microbalance (QCM) were employed to verify the adsorption of SWNTs on the gold electrodes.The results proved that SWNTs could enhance the direct electron transfer proecss between the electrodes and redox proteins.     

Development and characterization of a new conducting carbon composite electrode

A new conducting composite flexible material prepared from cellulose acetate (CA) polymer and graphite has been developed and used for the fabrication of electrodes, which were then characterized by cyclic voltammetry and electrochemical impedance spectroscopy. Scanning electron microscopy (SEM) was used to provide information concerning the morphology of the composite electrode surface. The potential window, background currents and capacitance were evaluated by cyclic voltammetry in the pH range from 4.6 to 8.2. The voltammetry of model electroactive species demonstrates a close to reversible electrochemical behaviour, under linear diffusion control. The electroactive area of the composite electrodes increases after appropriate electrode polishing and electrochemical pre-treatment. The electrodes were used as substrate for the electropolymerisation of the phenazine dye neutral red, for future use as redox mediator in electrochemical biosensors. The composite electrodes were also successfully used for the amperometric detection of ascorbate at 0.0 V vs. SCE, and applied to the measurement of ascorbate in Vitamin C tablets; the sensor exhibits high sensitivity and a low detection limit of 7.7 μM. Perspectives for use as a versatile, mechanically flexible and robust composite electrode of easily adaptable dimensions are indicated.     

Detecting cells on the surface of a silver electrode quartz crystal microbalance using plasma treatment and graft polymerization

This paper utilizes a silver electrode quartz crystal microbalance (QCM) mass sensor to detect the physiology of cells. This study also investigates the plasma surface modification of silver electrode QCMs through deposition of hexamethyldisilazane (HMDSZ) films as a protection film. To improve the cell growth, this paper also performs post-treatments by surface-grafting acrylic acid (AAc), acrylamide (AAm), and oxygen plasma treatment onto the QCM electrodes. Experimental results indicate that plasma deposition is a useful technique to protect the surface of silver electrodes. This technique extends the unpeeling time of silver electrodes from 1 to 7 days. The hydrophilic silver electrode QCM surface modified by AAm exhibited a better storage time effect than other post-treatments.     

Poly(brilliant green)/carbon nanotube-modified carbon film electrodes and application as sensors

Poly(brilliant green) (PBG) films were formed on carbon film electrodes (CFE) by electropolymerisation of brilliant green monomer using potential cycling or at fixed potential from different pH solutions. The modified electrodes, PBG/CFE, were characterised by cyclic voltammetry (CV) in electrolytes of different pH by electrochemical impedance spectroscopy (EIS) and scanning electron microscopy (SEM). In order to increase the stability of the polymer film and enhance the response, multi-walled carbon nanotubes (MWCNTs) were first deposited on CFE and then PBG was formed on top, PBG/CNT/CFE. The modified electrodes were applied to the amperometric determination of ascorbic acid (AA) in phosphate buffer pH?7.0 at 0.0 V vs. saturated calomel electrode (SCE) and the results were compared, the presence of CNT leading to a significant increase in sensitivity. An interference study was carried out and good separation between AA and dopamine (DA) peaks was achieved that led to the successful determination of DA without interferences. Other interferents: aspirin, acetaminophen, salicylic acid and uric acid exhibited no response on the PBG/CNT/CFE. Determination of AA in pharmaceutical samples was successfully performed.     

A novel dual-impedance-analysis EQCM system--investigation of bovine serum albumin adsorption on gold and platinum electrode surfaces

Both quartz crystal micro-balance (QCM) impedance and electrochemical impedance spectroscopy (EIS) methods are widely used in interface studies. This paper presents details about a new strategy for simultaneous, mutual-interference-free and accurate measurements of QCM impedance and EI, through connecting a suitable capacitance in series with the piezoelectric quartz crystal (PQC) between QCM impedance and EIS measurement instruments. Combined and individual measurements of QCM impedance and EIS during silver deposition gave results comparable with each other, demonstrating the reliability of the proposed method. Bovine serum albumin (BSA) adsorption on gold and platinum electrodes in Britton-Robinson (B-R) buffers was investigated, and the Fe(CN)6(3-)/Fe(CN)6(4-) couple was used as an electrochemical probe to characterize BSA adsorption. While the reversibility of Fe(CN)6(3-)/Fe(CN)6(4-) couple on bare Au and Pt electrodes changed very slightly with decreasing solution pH from pH approximately 7 to pH approximately 2, the standard rate constant (ks) of this couple increased abruptly with solution pH below pH approximately 4.5 at a BSA-modified Au electrode, but decreased with solution pH at a BSA-modified Pt electrode. By analyzing the QCM impedance data with a modified BVD equivalent circuit and the EI data with a modified Randle's equivalent circuit, inflexion changes at pH approximately 4.5 were all found at pH-dependent responses of the resonant frequency, the double-layer capacitance, the capacitance of the adsorbed BSA layer, the peak-absorbance values of BSA solutions at 277.5 and 224.5 nm, and so on. It was also found that a BSA adsorption layer can effectively inhibit gold corrosion during ferrocyanide oxidation in a ferrocyanide-containing BR solution. Some preliminary explanations of these findings have been given. The proposed method is highly recommended for wider applications in surface science.     

Electrochemical properties of myoglobin deposited on multi-walled carbon nanotube/ciprofloxacin film

We report the direct electrochemical and electrocatalytic properties of myoglobin (MB) on a multi-walled carbon nanotube/ciprofloxacin (MWCNT/CF) film-modified electrode. A highly homogeneous MWCNT thin-film was prepared on an electrode surface using ciprofloxacin (CF) as a dispersing agent. MB was then electrochemically deposited onto the MWCNT/CF-modified electrode. The MB/MWCNT/CF film was characterized by scanning electron microscopy and UV-visible spectroscopy (UV-vis). UV-vis spectra confirmed that MB retained its original state on the MWCNT/CF film. Direct electrochemical properties of MB on the MWCNT/CF film were investigated by cyclic voltammetry. The formal potential and electron transfer rate constant were evaluated in pH 7.2 buffer solution as -0.327V and 300s(-1), respectively. In addition, the MB/MWCNT/CF-modified electrode showed excellent electrocatalytic properties for the reduction of hydrogen peroxide (H(2)O(2)). The MB/MWCNT/CF-modified electrode was used for the detection of H(2)O(2) at concentrations from 1×10(-6)M to 7×10(-4)M in pH 7.2 buffer solution. Overall, the MB/MWCNT/CF-modified electrode was very stable and has potential for development as a H(2)O(2) sensor.     

Molecular films of water-miscible ionic liquids formed on glassy carbon electrodes: characterization and electrochemical applications

This letter describes the formation and possible electrochemical applications of molecular films of water-miscible imidazolium-based ionic liquids (ILs) on glassy carbon (GC) electrodes. X-ray photoelectron spectroscopy (XPS) and electrochemical results indicate that the water-miscible ILs used in this study can interact with the GC electrode and form molecular films on the electrode surface. The formed molecular films are found to possess striking electrochemical properties such as electrocatalysis toward ascorbic acid (AA) and the capability to facilitate direct electron transfer of horseradish peroxidase (HRP). This demonstration would pave the way for new electrochemical applications of water-miscible ILs and is envisaged to be useful for the investigation of the electrochemical properties of water-miscible ILs in aqueous media provided the same counteranion is used as the supporting electrolyte.     

Electrochemical DNA Biosensor Based on Graphene and TiO2 Nanorods Composite Film for the Detection of Transgenic Soybean Gene Sequence of MON89788

Based on graphene (GR), TiO₂ nanorods, and chitosan (CTS) nanocomposite modified carbon ionic liquid electrode (CILE) as substrate electrode, a new electrochemical DNA biosensor was effectively fabricated for the detection of the transgenic soybean sequence of MON89788. By using methylene blue (MB) as hybridization indicator for monitoring the hybridization with different ssDNA sequences, the differential pulse voltammetric response of MB on DNA modified electrodes were recorded and compared. Due to the synergistic effects of TiO₂ nanorods and GR on the electrode surface, the electrochemical responses of MB were greatly increased. Under optimal conditions the differential pulse voltammetric response of the target ssDNA sequence could be detected in the range from 1.0×10^?12 to 1.0×10^?6 mol/L with a detection limit of 7.21×10^?13 mol/L (3σ). This electrochemical DNA biosensor was further applied to the polymerase chain reaction (PCR) product of transgenic soybeans with satisfactory results.     

Recycling Chocolate Aluminum Wrapping Foil as to Create Electrochemical Metal Strip Electrodes

The development of low-cost electrode devices from conductive materials has recently attracted considerable attention as a sustainable means to replace the existing commercially available electrodes. In this study, two different electrode surfaces (surfaces 1 and 2, denoted as S1 and S2) were fabricated from chocolate wrapping aluminum foils. Energy dispersive X-Ray (EDX) and field emission scanning electron microscopy (FESEM) were used to investigate the elemental composition and surface morphology of the prepared electrodes. Meanwhile, cyclic voltammetry (CV), chronoamperometry, electrochemical impedance spectroscopy (EIS), and differential pulse voltammetry (DPV) were used to assess the electrical conductivities and the electrochemical activities of the prepared electrodes. It was found that the fabricated electrode strips, particularly the S1 electrode, showed good electrochemical responses and conductivity properties in phosphate buffer (PB) solutions. Interestingly, both of the electrodes can respond to the ruthenium hexamine (Ruhex) redox species. The fundamental results presented from this study indicate that this electrode material can be an inexpensive alternative for the electrode substrate. Overall, our findings indicate that electrodes made from chocolate wrapping materials have promise as electrochemical sensors and can be utilized in various applications.     

Immobilization and electrochemical redox behavior of cytochrome c on fullerene film-modified electrodes

Two different fullerene film-modified electrodes were prepared and used for surface immobilization and electrochemical property investigation of horse heart cytochrome c (cyt c). Both a pristine fullerene film and fullerene-palladium (C(60)-Pd) polymer film-modified platinum, glassy carbon and indium-tin-oxide (ITO) electrodes were used. The immobilized cyt c was characterized by piezoelectric microgravimetry at a quartz crystal microbalance (QCM), UV-visible absorption, and X-ray photoelectron spectroscopy (XPS), as well as cyclic voltammetry (CV) techniques. The UV-visible spectral studies revealed a small blue shift of both the Soret and Q band of the heme moiety of cyt c, immobilized on the C(60)-Pd polymer film-modified ITO electrode, as compared to the bands of cyt c in solution suggesting that molecules of cyt c are densely packed onto the surface of the modified electrode. The CV studies revealed a quasi-reversible electrode behavior of the heme moiety indicating the occurrence of kinetically hindered electron transfer. A good agreement was found between the values of cyt c electrode surface coverage determined by piezoelectric microgravimetry and cyclic voltammetry. For piezoelectric microgravimetry, these values ranged from 0.5 x 10(-10) to 2.5 x 10(-10) mol cm(-2), depending upon the amount of cyt c present in solution and the time allowed for immobilization, which compared with a value of 3.6+/-0.4 x 10(-10) mol cm(-2) determined by CV. The possible mechanisms of cyt c immobilization on the C(60) film and C(60)-Pd film-modified electrodes are also discussed.     

Direct electrochemistry of catalase on glassy carbon electrodes.

Catalase was investigated as a possible catalyst of the electrochemical reduction of oxygen on glassy carbon electrodes. The presence of catalase dissolved in solution only provoked a moderate current increase, which was fully explained by the catalase-catalysed disproportionation of hydrogen peroxide (Scheme I). When catalase was adsorbed from dimethylsulfoxide on the surface of electrodes that did not undergo any electrochemical pre-treatment (EP), catalase efficiently catalysed oxygen reduction via direct electron transfer from the electrode (Scheme II). The results are discussed with respect to the electrode surface properties and the enzyme structure.     

苯甲酸在疏水性复合电极上的电化学还原行为

以铜片和锌片为基材,复合电镀制得Cu-PTFE(聚四氟乙烯)和Zn-PTFE疏水性复合电极,并将复合电极应用于苯甲酸的电化学还原行为研究。测定了复合电极在电解液中的Tafel极化曲线、循环伏安、电极稳定性和交流阻抗等电化学参数。结果表明,在苯甲酸电还原制备苯甲醛中,Cu-PTFE复合电极相对于Zn-PTFE复合电极具有较高的催化活性,其电还原产率分别为88.4%和79.2%,因此,Cu-PTFE复合电极有望成为苯甲酸电化学还原制备苯甲醛的电极材料。电化学行为的研究结果显示,苯甲酸在疏水性复合电极上的电还原过程可能只受电子迁移过程控制。     

Lightweight ITO Electrodes Decorated with Gold Nanostructures for Electrochemical Applications

Gold nanostructures were fabricated on a transparent indium tin oxide (ITO) coated PET substrate by an electrodeposition technique from a potassium gold (III) chloride solution for two different types of applications. It was found that the optical transparency of lightweight ITO electrodes could be maintained by depositing isolated gold nanostructures while opening up the use of these electrodes for inner sphere electron reactions, such as hydroquinone oxidation, which are not possible at ITO electrodes. For practical applications the adhesion of gold to the ITO electrode was improved by modifying the ITO surface with 3‐mercaptopropyl‐trimethoxysilane (MPS). Compared to Au/ITO, the Au/MPS/ITO electrode showed vastly improved electrochemical activity toward various electron transfer reactions when subjected to mechanical stress. The biosensing properties of the Au/MPS/ITO electrode was also investigated by studying the detection of immobilized DNA on the Au/MPS/ITO electrode via electrochemical impedance spectroscopy (EIS).     

Preparation, characterization, and electrocatalytic activity of surface anchored, Prussian Blue containing starburst PAMAM dendrimers on gold electrodes

Gold bead electrodes were modified with submonolayers of 3-mercaptopropionic acid or 2-aminoethanethiol and further reacted with poly(amidoamine) (PAMAM) dendrimers (generation 4.0 and 3.5, respectively) to obtain films on which Prussian Blue (PB) was later absorbed to afford mixed and stable electrocatalytic layers. Experiments carried out with these novel materials not only showed an improved surface coverage of PB on the dendrimer modified electrodes as compared to PB modified gold electrodes prepared under acidic conditions, but also showed an increased stability at neutral pH values for one of the dendrimer containing substrates where the PB film on a bare gold electrode is simply not formed. The dendrimer modified electrodes were also tested as electrocatalytic substrates for the electroxidation of L(+)-ascorbic acid (AA), and it was found that their sensitivity as well as the corresponding detection limits were improved as compared to the voltammetric response of a Au-PB modified electrode. On the basis of UV-visible (UV-vis) spectroscopy and electrochemical experiments, it is suggested that the PB molecules are located within the dendritic structure of the surface attached PAMAM dendrimers.     

Spectroelectrochemical Measurements at Colloidal Au Multilayer Optically Transparent Electrodes

Application of thin colloidal Au multilayers on glass substrates as optically transparent electrodes is reported herein. Evaluation of the electrode by scanning electron microscopy and as an optically transparent thin layer electrode (OTTLE) illustrate its use for spectroelectrochemical applications. A spectroelectrochemical Nernst plot acquired for the oxidation of o‐tolidine yielded a value of E°=0.605 V (vs. Ag/AgCl) and n=1.88. Both of these values are in excellent agreement with previously published values obtained using a traditional Au minigrid OTTLE. The colloidal Au multilayer electrode is expected to offer many advantages over the minigrid OTTLE in specific applications. These advantages include direct control over microscopic surface topography, large electrochemical surface area, applicability to many different electrode geometries, and increased microscopic surface roughness for SERS and SPR applications.     

The detection of DNA deamination by electrocatalysis at DNA-modified electrodes

The method of electrocatalysis based on using a methylene blue (MB) as an electrochemical indicator and ferricyanide ions [Fe(CN)6]3- as an electron acceptor was applied in screening DNA for lesions caused by deamination of nucleobases. The damaged DNA was modeled by short 18-mer oligonucleotides containing the different number of mismatched target bases (uracil instead of cytosine residues). The hybridization capacity of these oligomers with complementary probes (immobilized on gold electrodes or free) was investigated by both electrochemical methods and UV spectroscopy. We have shown that the amplitude of the reduction signal corresponding to ferricyanide ions considerably increases in the presence of MB. This electrocatalytic effect allowed us to detect the changes in electrochemical properties of DNA caused by dU.dG mismatches. Using differential pulse voltammetry and cyclic voltammetry, we showed that the electron transport from the electrode through the double-stranded DNA to MB and then to ferricyanide ions is suppressed by the mismatches in duplex structure. According to UV-monitored melting data, single or multiple wobble dU.dG base pairs destabilize 18-mer DNA duplex by 9-27 degrees C.