Polyaniline‐Intercalated Molybdenum Oxide Nanocomposites: Simultaneous Synthesis and their Enhanced Application for Supercapacitor

A new and universal synthetic strategy to hybridize metal oxides and conduct polymer nanocomposites has been proposed in this work. The simultaneous reaction process, which includes the generation of metal oxide layers, the oxidation polymerization of monomers, and the in situ formation of polymer–metal oxides sandwich structure is successfully realized and results in the unique hybrid polyaniline (PANI)‐intercalated molybdenum oxide nanocomposites. The peroxomolybdate proved to play a dual role as the precursor of the inorganic hosts and the oxidizing agent for polymerization. The as‐obtained hybrid nanocomposites present a flexible lamellar structure by oriented assembly of conductive PANI chains in the MoO₃ interlayer, and thus inherit excellent electrical performance and possess the potential of active electrode materials for electrochemical energy storage. Such uniform lamellar structure together with the anticipated high conductivity of the hybrid PANI/MoO₃ nanocomposites afford high specific capacitance and good stability during the charge–discharge cycling for supercapacitor application.     

Two‐Dimensional Co@N‐Carbon Nanocomposites Facilely Derived from Metal–Organic Framework Nanosheets for Efficient Bifunctional Electrocatalysis

Metal–organic frameworks (MOFs) and MOF‐derived nanomaterials have recently attracted great interest as highly efficient, non‐noble‐metal catalysts. In particular, two‐dimensional MOF nanosheet materials possess the advantages of both 2D layered nanomaterials and MOFs and are considered to be promising nanomaterials. Herein, we report a facile and scalable in situ hydrothermal synthesis of Co–hypoxanthine (HPA) MOF nanosheets, which were then directly carbonized to prepare uniform Co@N‐Carbon nanosheets for efficient bifunctional electrocatalytic hydrogen‐evolution reactions (HERs) and oxygen‐evolution reactions (OERs). The Co embedded in N‐doped carbon shows excellent and stable catalytic performance for bifunctional electrocatalytic OERs and HERs. For OERs, the overpotential of Co@N‐Carbon at 10 mA cm^?2 was 400 mV (vs. reversible hydrogen electrode, RHE). The current density of Co@N‐Carbon reached 100 mA cm^?2 at an overpotential of 560 mV, which showed much better performance than RuO₂; the largest current density of RuO₂ that could be reached was only 44 mA cm^?2. The Tafel slope of Co@N‐Carbon was 61 mV dec^?1, which is comparable to that of commercial RuO₂ (58 mV dec^?1). The excellent electrocatalytic properties can be attributed to the nanosheet structure and well‐dispersed carbon‐encapsulated Co, CoN nanoparticles, and N‐dopant sites, which provided high conductivity and a large number of accessible active sites. The results highlight the great potential of utilizing MOF nanosheet materials as promising templates for the preparation of 2D Co@N‐Carbon materials for electrocatalysis and will pave the way to the development of more efficient 2D nanomaterials for various catalytic applications.     

Well‐Defined Metal–Organic Framework Hollow Nanocages

Metal–organic frameworks (MOFs) have demonstrated great potentials in a variety of important applications. To enhance the inherent properties and endow materials with multifunctionality, the rational design and synthesis of MOFs with nanoscale porosity and hollow feature is highly desired and remains a great challenge. In this work, the formation of a series of well‐defined MOF (MOF‐5, Fe^II‐MOF‐5, Fe^III‐MOF‐5) hollow nanocages by a facile solvothermal method, without any additional supporting template is reported. A surface‐energy‐driven mechanism may be responsible for the formation of hollow nanocages. The addition of pre‐synthesized poly(vinylpyrrolidone)‐ (PVP) capped noble‐metal nanoparticles into the synthetic system of MOF hollow nanocages yields the yolk–shell noble metal@MOF nanostructures. The present strategy to fabricate hollow and yolk–shell nanostructures is expected to open up exciting opportunities for developing a novel class of inorganic–organic hybrid functional nanomaterials.     

Amphiphilic Organic–Inorganic Hybrid Zeotype Aluminosilicate like a Nanoporous Crystallized Langmuir–Blodgett Film

A new organic–inorganic hybrid zeotype compound with amphiphilic one‐dimensional nanopore and aluminosilicate composition was developed. The framework structure is composed of double aluminosilicate layers and 12‐ring nanopores; a hydrophilic layer pillared by Q² silicon atom species and a lipophilic layer pillared by phenylene groups are alternately stacked, and 12‐ring nanopores perpendicularly penetrate the layers. The framework topology looks similar to that of an AFI‐type zeolite but possesses a quasi‐multidimensional pore structure consisting of a 12‐ring channel and intersecting small pores equivalent to 8‐rings. The hybrid material with alternately laminated lipophilic and hydrophilic nanospaces can be assumed as a crystallized Langmuir–Blodgett film. It demonstrates microporous adsorption for both hydrophilic and lipophilic adsorptives, and its outer surface tightly adsorbs lysozyme whose molecular size is much larger than its micropore opening. Our results suggest the possibility of designing porous adsorbent with high amphipathicity.     

Hierarchical MoS2@Carbon Microspheres as Advanced Anodes for Li‐Ion Batteries

Hierarchical hybridized nanocomposites with rationally constructed compositions and structures have been considered key for achieving superior Li‐ion battery performance owing to their enhanced properties, such as fast lithium ion diffusion, good collection and transport of electrons, and a buffer zone for relieving the large volume variations during cycling processes. Hierarchical MoS₂@carbon microspheres (HMCM) have been synthesized in a facile hydrothermal treatment. The structure analyses reveal that ultrathin MoS₂ nanoflakes (ca. 2–5 nm) are vertically supported on the surface of carbon nanospheres. The reversible capacity of the HMCM nanocomposite is maintained at 650 mA h g^?1 after 300 cycles at 1 A g^?1. Furthermore, the capacity can reach 477 mA h g^?1 even at a high current density of 4 A g^?1. The outstanding electrochemical performance of HMCM is attributed to the synergetic effect between the carbon spheres and the ultrathin MoS₂ nanoflakes. Additionally, the carbon matrix can supply conductive networks and prevent the aggregation of layered MoS₂ during the charge/discharge process; and ultrathin MoS₂ nanoflakes with enlarged surface areas, which can guarantee the flow of the electrolyte, provide more active sites and reduce the diffusion energy barrier of Li⁺ ions.     

Sb2Se3‐Sensitized Inorganic–Organic Heterojunction Solar Cells Fabricated Using a Single‐Source Precursor

The photovoltaic performance of Sb₂Se₃‐sensitized heterojunction solar cells, which were fabricated by a simple deposition of Sb₂Se₃ on mesoporous TiO₂ by an approach that features multiple cycles of spin coating with a single‐source precursor solution and thermal decomposition, is reported. Poly[2,6‐(4,4‐bis(2‐ethylhexyl)‐4H‐cyclopenta[2,1‐b;3,4‐b′]dithiophene)‐alt‐4,7(2,1,3‐benzothioadiazole)] was used as the hole‐transporting material. The most efficient cell exhibited a short‐circuit current density of 22.3 mA cm^?2, an open‐circuit voltage of 304.5 mV, and a fill factor of 47.2 %, yielding a power conversion efficiency of 3.21 % under standard test conditions (irradiation of 1000 W m^?2, air mass=1.5 G). The results of this study imply that the developed approach has a high potential as a simple and effective route for the fabrication of efficient and inexpensive solar cells.     

A 3D Hybrid Praseodymium–Antimony–Oxochloride Compound: Single‐Crystal‐to‐Single‐Crystal Transformation and Photocatalytic Properties

A 3D organic–inorganic hybrid compound, (2‐MepyH)₃ [{Fe(1,10‐phen)₃}₃][{Pr₄Sb₁₂O₁₈(OH) Cl_11.5}(TDC)_4.5({Pr₄Sb₁₂O₁₈(OH)Cl_9.5} Cl)] ? 3 (2‐Mepy) ? 28 H₂O ( 1 ; 2‐Mepy=2‐methylpyridine, 1,10‐phen=1,10‐phenanthroline, H₂TDC=thiophene‐2,5‐dicarboxylic acid), was hydrothermally synthesized and structurally characterized. Unusually, two kinds of high‐nuclearity clusters, namely [(Pr₄Sb₁₂O₁₈ (OH)Cl₁₁)(COO)₅]^5? and [(Pr₄Sb₁₂O₁₈ (OH)Cl₉)Cl(COO)₅]^4?, coexist in the structure of compound 1 ; two of the latter clusters are doubly bridged by two μ₂‐Cl^? moieties to form a new centrosymmetric dimeric cluster. An unprecedented spontaneous and reversible single‐crystal‐to‐single‐crystal transformation was observed, which simultaneously involved a notable organic‐ligand movement between the metal ions and an alteration of the bridging ion in the dimeric cluster, induced by guest‐release/re‐adsorption, thereby giving rise to the interconversion between compound 1 and the compound (2‐MepyH)₃[{Fe(1,10‐phen)₃}₃][{Pr₄Sb₁₂O₁₈(OH)Cl_11.5}(TDC)₄({Pr₄Sb₁₂O₁₈Cl_10.5(TDC)_0.5(H₂O)_1.5}O_0.5)] ? 25 H₂O ( 1′ ). The mechanism of this transformation has also been discussed in great detail. Photocatalytic H₂‐evolution activity was observed for compound 1′ under UV light with Pt as a co‐catalyst and MeOH as a sacrificial electron donor.     

Revealing the Nano‐Level Molecular Packing in Chitosan–NiO Nanocomposite by Using Positron Annihilation Spectroscopy and Small‐Angle X‐ray Scattering

Chitosan–NiO nanocomposite (CNC) is shown to be a potential dielectric material with promising properties. CNCs containing NiO nanoparticles (0.2, 0.6, 1, 2, 5 wt %) are prepared through chemical methods. The inclusion of NiO nanoparticles in the chitosan matrix is confirmed by scanning electron microscopy (SEM) and X‐ray diffraction. The morphology of the NiO nanoparticles and the nanocomposites is investigated by transmission electron microscopy and SEM, respectively. Positron annihilation lifetime spectroscopy (PALS) and the coincidence Doppler broadening (CDB) technique are used to quantify the free volume and molecular packing in the nanocomposites. The triplet‐state positronium lifetime and the corresponding intensity show the changes in nanohole size, density, and size distribution as a function of NiO loading. Small‐angle X‐ray scattering indicates that the NiO aggregates are identical in all the CNCs. The momentum density distribution obtained from CDB measurements excludes the possibility of a contribution of vacant spaces (pores) available in NiO aggregates to the free volume of nanocomposites upon determination by using PALS. The results show systematic variation in free‐volume properties and nano‐level molecular packing as a function of NiO loading, which is presumed to play a vital role in determining the various properties of the nanocomposites.     

Morphology Tailoring of Sulfonic Acid Functionalized Organosilica Nanohybrids for the Synthesis of Biomass‐Derived Alkyl Levulinates

Morphology evolution of sulfonic acid functionalized organosilica nanohybrids (Si(Et)Si‐Pr/ArSO₃H) with a 1D tubular structure (inner diameter of ca. 5 nm), a 2D hexagonal mesostructure (pore diameter of ca. 5 nm), and a 3D hollow spherical structure (shell thickness of 2–3 nm and inner diameter of ca. 15 nm) was successfully realized through P123‐templated sol–gel cocondensation strategies and fine‐tuning of the acidity followed by aging or a hydrothermal treatment. The Si(Et)Si‐Pr/ArSO₃H nanohybrids were applied in synthesis of alkyl levulinates from the esterification of levulinic acid and ethanolysis of furfural alcohol. Hollow spherical Si(Et)Si‐Pr/ArSO₃H and hexagonal mesoporous analogues exhibited the highest and lowest catalytic activity, respectively, among three types of nanohybrids; additionally, the activity was influenced by the ?SO₃H loading. The activity differences are explained in terms of different Brønsted acid and textural properties, reactant/product diffusion, and mass transfer rate, as well as accessibility of ?SO₃H sites to the reactant molecules. The reusability of the nanohybrids was also evaluated.     

Hybrid Organic–Inorganic Silica Gel Carriers with Controlled Drug‐Delivery Properties

Pure and modified silica materials were synthesised by a sol–gel process and used as carrier for the controlled release of ibuprofen, selected as model drug. A one‐step synthesis was optimised for the preparation of various silica–drug composites by using tetraethoxysilane and 3‐aminopropyltriethoxysilane as precursors at different molar ratios. The presence of aminopropyl groups on the silica surface influences the drug‐delivery rate leading to a high degree the desorption process controlled.     

Direct Synthesis of a Photoactive Inorganic–Organic Mesostructured Hybrid Material and its Application as a Photocatalyst

A direct route : Silylated triphenylmethanol is incorporated into mesoporous material MCM‐41 through a direct synthesis method. Under acidic conditions, this inorganic–organic hybrid generates trityl cations to give the photoactive material Tyl‐MCM41. Tyl‐MCM41 promotes the photosensitized dimerization of 1,3‐cyclohexadiene with an unprecedented selectivity towards the formation of the exo product (see scheme).

     

Hydrogen‐Bond‐Assisted “Gold Cold Fusion” for Fabrication of 2D Web Structures

Keeping their cool : Fabrication of a 2D weblike nanonetwork of gold was successfully demonstrated through a two‐step procedure including complexation of gold precursors to a weblike supramolecular assembly of surfactant followed by in situ reduction of the precursors to gold. Molecular assemblies stabilized by hydrogen bonding provided a sound template, leading to the highly integrated structure of gold through room‐temperature (cold) nanostructure fusion.