Highly Luminescent and Water‐Soluble Two‐Dimensional Supramolecular Organic Framework: All‐Organic Photosensitizer Template for Visible‐Light‐Driven Hydrogen Evolution from Water

A highly fluorescent (Φ_F=0.60) and water‐soluble two‐dimensional (2D) honeycomb‐shaped supramolecular organic framework (SOF) was successfully synthesized in pure aqueous solution via self‐assembly of novel cyanostilbene‐functionalized trilateral guest molecules and cucurbit[8]uril hosts. The size of this fluorescent 2D SOF was >500 nm in diameter, 1.7 nm in thickness, and 3.9 nm in the honeycomb pore diameter. This 2D SOF holds potential as a new all‐organic photosensitizer template for photocatalytic H₂ evolution from pure water.     

Compression of Self‐Assembled Nano‐Objects: 2D/3D Transitions in Films of (Perfluoroalkyl)Alkanes—Persistence of an Organized Array of Surface Micelles

Understanding and controlling the molecular organization of amphiphilic molecules at interfaces is essential for materials and biological sciences. When spread on water, the model amphiphiles constituted by C_nF_2n+1C_mH_2m+1 (FnHm) diblocks spontaneously self‐assemble into surface hemimicelles. Therefore, compression of monolayers of FnHm diblocks is actually a compression of nanometric objects. Langmuir films of F8H16, F8H18, F8H20, and F10H16 can actually be compressed far beyond the “collapse” of their monolayers at ～30 Ų. For molecular areas A between 30 and 10 Ų, a partially reversible, 2D/3D transition occurs between a monolayer of surface micelles and a multilayer that coexist on a large plateau. For A<10 Ų, surface pressure increases again, reaching up to ～48 mN m^?1 before the film eventually collapses. Brewster angle microscopy and AFM indicate a several‐fold increase in film thickness when scanning through the 2D/3D coexistence plateau. Compression beyond the plateau leads to a further increase in film thickness and, eventually, to film disruption. Reversibility was assessed by using compression–expansion cycles. AFM of F8H20 films shows that the initial monolayer of micelles is progressively covered by one (and eventually two) bilayers, which leads to a hitherto unknown organized composite arrangement. Compression of films of the more rigid F10H16 results in crystalline‐like inflorescences. For both diblocks, a hexagonal array of surface micelles is consistently seen, even when the 3D structures eventually disrupt, which means that this monolayer persists throughout the compression experiments. Two examples of pressure‐driven transformations of films of self‐assembled objects are thus provided. These observations further illustrate the powerful self‐assembling capacity of perfluoroalkyl chains.     

Spin Self‐Assembled Clay Nanocomposite Passivation Layers Made from a Photocrosslinkable Poly(vinyl alcohol) and Na+‐Montmorillonite Enhance the Environmental Stability of Organic Thin‐Film Transistors

We investigated the effects of the multilayer polymer‐clay nanohybrid passivation films on the stability of pentacene organic thin‐film transistors (OTFTs) exposed to air and UV irradiation. Well‐ordered multilayer films were deposited by the spin‐assisted layer‐by‐layer assembly method using photocrosslinkable poly(vinyl alcohol) with the N‐methyl‐4(4′‐formylstyryl)pyridinium methosulfate acetal group (SbQ‐PVA) and Na⁺‐montmorillonite in a water‐based solution process. When photocrosslinked, these SbQ‐PVA/clay multilayers were found to serve as excellent barriers to O₂ and UV‐light. Moreover, when used as passivation layers, they enhanced the stability of pentacene OTFT devices exposed to air and UV radiation.     

Amperometric Hydrogen Peroxide Biosensor Based on the Immobilization of Horseradish Peroxidase (HRP) on the Layer‐by‐Layer Assembly Films of Gold Colloidal Nanoparticles and Toluidine Blue

The precursor film was first formed on the Au electrode surface based on the self‐assembly of L ‐cysteine and the adsorption of gold colloidal nanoparticles (nano‐Au). Layer‐by‐layer (LBL) assembly films of toluidine blue (TB) and nano‐Au were fabricated by alternately immersing the electrode with precursor film into the solution of toluidine blue and gold colloid. Cyclic voltammetry (CV) and quartz crystal microbalance (QCM) were adopted to monitor the regular growth of {TB/Au} bilayer films. The successful assembly of {TB/Au}_n films brings a new strategy for electrochemical devices to construct layer‐by‐layer assembly films of nanomaterials and low molecular weight materials. In this article, {TB/Au}_n films were used as model films to fabricate a mediated H₂O₂ biosensor based on horseradish peroxidase, which responded rapidly to H₂O₂ in the linear range from 1.5×10^?7 mol/L to 8.6×10^?3 mol/L with a detection limit of 7.0×10^?8 mol/L. Morphologies of the final assembly films were characterized with scanning probe microscopy (SPM).     

Synthesis of Mesoporous Lithium Titanate Thin Films and Monoliths as an Anode Material for High‐Rate Lithium‐Ion Batteries

Mesoporous Li₄Ti₅O₁₂ (LTO) thin film is an important anode material for lithium‐ion batteries (LIBs). Mesoporous films could be prepared by self‐assembly processes. A molten‐salt‐assisted self‐assembly (MASA) process is used to prepare mesoporous thin films of LTOs. Clear solutions of CTAB, P123, LiNO₃, HNO₃, and Ti(OC₄H₉)₄ in ethanol form gel‐like meso‐ordered films upon either spin or spray coating. In the assembly process, the CTAB/P123 molar ratio of 14 is required to accommodate enough salt species in the mesophase, in which the Li^I/P123 ratio can be varied between molar ratios of 28 and 72. Calcination of the meso‐ordered films produces transparent mesoporous spinel LTO films that are abbreviated as Cxx‐yyy‐zzz or CAxx‐yyy‐zzz (C=calcined, CA=calcined–annealed, xx=Li^I/P123 molar ratio, and yyy=calcination and zzz=annealing temperatures in Celsius) herein. All samples were characterized by using XRD, TEM, N₂‐sorption, and Raman techniques and it was found that, at all compositions, the LTO spinel phase formed with or without an anatase phase as an impurity. Electrochemical characterization of the films shows excellent performance at different current rates. The CA40‐350‐450 sample performs best among all samples tested, yielding an average discharge capacity of (176±1) mA h g^?1 at C/2 and (139±4) mA h g^?1 at 50 C and keeping 92 % of its initial discharge capacity upon 50 cycles at C/2.     

Preparation and resistivity study of silver nanocomposite films using spin‐assisted layer‐by‐layer assembly

Nanocomposite films [Ag/(PAH‐PSS)_nPAH]_m were fabricated on a silicon substrate using a time‐ and cost‐efficient spin‐assisted layer‐by‐layer (SA‐LbL) self‐assembly technique. A virtually monolayer‐like layer of self‐assembled silver nanoparticles was formed when deposition time increased to 30 min. It was found that polymer multilayers could effectively decrease the resistivity of silver nanoparticle monolayer, which was far higher than that of bulk silver metal; however, the resistivity of Ag/(PAH‐PSS)_nPAH multilayer films increased along with the increasing of the number of polymer bilayers. XPS investigations showed that silver nanoparticles were partially oxidized, which might be the major cause of the high resistivity of silver nanoparticle monolayer. Copyright © 2008 John Wiley & Sons, Ltd.     

Gold‐Decorated Chiral Macroporous Films by the Self‐Assembly of Functionalised Block Copolymers

We describe a new and very versatile method to place chosen chemical functionalities at the edge of the pores of macroporous materials. The method is based on the synthesis and self‐assembly of inorganic block copolymers (BCPs) having chiral rigid segments bearing controllable quantities of randomly distributed functional groups. The synthesis of a series of optically active block copolyphosphazenes (PP) with the general formula [N?P(R‐O₂C₂₀H₁₂)_0.9(FG)_0.2]_n‐b‐[N?PMePh]_m (FG=‐OC₅H₄N ( 6 ), ‐NC₄H₈S ( 7 ), and ‐NC₄H₈O ( 8 )), was accomplished by the sequential living cationic polycondensation of N‐silylphosphoranimines, using the mono‐end‐capped initiator [Ph₃P?N?PCl₃][Cl] ( 3 ). The self‐assembly of the phosphazene BCPs 6 – 8 led to chiral porous films. The functionality present on those polymers affected their self‐assembly behaviour resulting in the formation of pores of different diameters (D_n=111 ( 6 ), 53 ( 7 ) and 77 nm ( 8 )). The specific functionalisation of the pores was proven by decorating the films with gold nanoparticles (AuNPs). Thus, the BCPs 6 and 7 , having pyridine and thiomorpholine groups, respectively, were treated with HAuCl₄, followed by reduction with NaBH₄, yielding a new type of block copolyphosphazenes, which self‐assembled into chiral porous films specifically decorated with AuNPs at the edge of the pores.     

Photocatalytic Nanocomposite Films Fabricated by Layer‐by‐Layer Self‐assembly of TiO2 Nanoparticles and Lignosulfonates

Photocatalytic multilayer nanocomposite films composed of anatase TiO₂ nanoparticles and lignosulfonates (LS) were fabricated on quartz slides by the layer‐by‐layer (LBL) self‐assembly technique. X‐ray photoelectron spectroscopy (XPS), UV‐vis spectroscopy and atomic force microscopy (AFM) were used to characterize the TiO₂/LS multilayer nanocomposite films. Moreover, the photocatalytic properties (decomposition of methyl orange and bacteria) of multilayer nanocomposite films were investigated. XPS results indicated that the intensities of titanium and sulfur peaks increased with the LBL deposition process. A linear increase in absorbance at 280 nm was found by UV‐Vis spectroscopy, suggesting that stepwise multilayer growth occurs on the substrate and this deposition process is highly reproducible. AFM images showed that quartz slide was completely covered by TiO₂ nanoparticles when a 10‐bilayer multilayer film was formed. The decomposition efficiency of methyl orange by TiO₂/LS multilayer films under the same UV irradiation time increased linearly with the number of TiO₂ layers, and the results of decomposition of bacteria under UV irradiation showed that TiO₂/LS multilayer nanocomposite films exhibited excellent decomposition activity of bacteria (Escherichia coil).     

Morphology,Structure, and Dynamics of Pentacene Thin Films and Their Nanocomposites with [C2C1im][NTf2] and [C2C1im][OTF] Ionic Liquids

In this study, a homogeneous thin film growth of pentacene onto indium tin oxide (ITO) coated glass surfaces is explored using a high-resolution and reproducible vapor deposition methodology. Moreover, vacuum thermal evaporation of ionic liquids (ILs) ([C₂C₁im][NTf₂] and [C₂C₁im][OTF]) onto ITO, gold/palladium (AuPd) and pentacene surfaces were performed. A greater wettability behavior of ILs is observed for surfaces containing AuPd. Sequential and simultaneous depositions of ILs and pentacene were explored. Simultaneous depositions lead to the formation of nanocomposites films, consisting of IL micro- and nanodroplets covered by pentacene layers. Plasma surface treatment was used to induce the ILs droplets coalescence and explore the dynamics and phase separation of the nanocomposites. The [C₂C₁im][OTF] droplets were found to be completely covered with pentacene, which suggests a great affinity between cation-anion pairs and the aromatic moiety. Pentacene films and their nanocomposites with ILs exhibit a typical optical band gap of E_gap=1.77 eV, indicating that the nanocomposite phase domains are large enough to behavior as the bulk.     

Electron‐Driven Self‐Assembly of Salt Nanocrystals in Liquid Helium

The self‐assembly of salt nanocrystals from chemical reactions inside liquid helium is reported for the first time. Reaction is initiated by an electron impacting a helium nanodroplet containing sodium atoms and SF₆ molecules, leading to preferential production of energetically favorable structures based on the unit cell of crystalline NaF. These favorable structures are observed as magic number ions (anomalously intense peaks) in mass spectra and are seen in both cationic and anionic channels in mass spectra, for example, (NaF)_nNa⁺ and (NaF)_nF^?. In the case of anions the self‐assembly is not directly initiated by electrons: the dominant process involves resonant electron‐induced production of metastable electronically excited He^? anions, which then initiate anionic chemistry by electron transfer.     

Fabrication of a Stable Layer‐by‐Layer Thin Film Based on Diazoresin and Phenolic Hydroxy‐Containing Polymers via H‐Bonding

Using the self assembly technique, a stable multilayer films was successfully fabricated from diazoresin (DR) and poly(styrene‐co‐(N‐(p‐hydroxyphenyl)maleimide)) (P(S‐co‐HPMI)) followed by UV irradiation. The driving force of the self‐assembly was confirmed to be H‐bonding attraction between the diazonium group (—N₂⁺) of DR and the phenolic hydroxy group (—Ph—OH) of P(S‐co‐HPMI). A linkage conversion from H‐bond to covalent bond takes place after decomposition of the —N₂⁺ group using UV irradiation. As a result, the stability of the film towards polar solvents increases dramatically.     

Recruitment and Immobilization of a Fluorinated Biomarker Across an Interfacial Phospholipid Film using a Fluorocarbon Gas

Perfluorohexane gas when introduced in the air atmosphere above a film of phospholipid self‐supported on an aqueous solution of C₂F₅‐labeled compounds causes the recruitment and immobilization of the latter in the interfacial film. When the phospholipid forms a liquid‐condensed Gibbs monolayer, which is the case for dipalmitoylphosphatidylcholine (DPPC), the C₂F₅‐labeled molecule remains trapped in the monolayer after removal of F‐hexane. Investigations involve bubble profile analysis tensiometry (Gibbs films), Langmuir monolayers and microbubble experiments. The new phenomenon was utilized to incorporate a hypoxia biomarker, a C₂F₅‐labeled nitrosoimidazole (EF5), in microbubble shells. This finding opens perspectives in the delivery of fluorinated therapeutic molecules and biomarkers.     

Multifunctional Tricarbazolo Triazolophane Macrocycles: One‐Pot Preparation,Anion Binding,and Hierarchical Self‐Organization of Multilayers

Programming the synthesis and self‐assembly of molecules is a compelling strategy for the bottom‐up fabrication of ordered materials. To this end, shape‐persistent macrocycles were designed with alternating carbazoles and triazoles to program a one‐pot synthesis and to bind large anions. The macrocycles bind anions that were once considered too weak to be coordinated, such as PF₆^?, with surprisingly high affinities (β₂=10¹¹ M ^?2 in 80:20 chloroform/methanol) and positive cooperativity, α=(4 K₂/K₁)=1200. We also discovered that the macrocycles assemble into ultrathin films of hierarchically ordered tubes on graphite surfaces. The remarkable surface‐templated self‐assembly properties, as was observed by using scanning tunneling microscopy, are attributed to the complementary pairing of alternating triazoles and carbazoles inscribed into both the co‐facial and edge‐sharing seams that exist between shape‐persistent macrocycles. The multilayer assembly is also consistent with the high degree of molecular self‐association observed in solution, with self‐association constants of K=300 000 M ^?1 (chloroform/methanol 80:20). Scanning tunneling microscopy data also showed that surface assemblies readily sequester iodide anions from solution, modulating their assembly. This multifunctional macrocycle provides a foundation for materials composed of hierarchically organized and nanotubular self‐assemblies.     

Enhanced dielectric properties of polymer composite films induced by encapsulated MWCNTs with a one core‐two shell structure

Multiwalled carbon nanotubes (MWCNTs) can endow high dielectric constant to polymer‐based composites. However, the accompanying poor dispersion of MWCNTs and high dielectric loss for composites severely limit their application in dielectric field. Herein, a modified acid‐treated MWCNTs encapsulated by the polyaniline/poly(sodium 4‐styrenesulfonate) layers (aMWCNTs@PANI‐PSS) with a one core‐two shell structure was fabricated by in situ polymerization followed by electrostatic self‐assembly technique. Furthermore, the composite films based on aMWCNTs@PANI‐PSS/poly(vinylidenefluoride‐hexaflouropropylene) (PVDF‐HFP) were fabricated by a solution‐casting method. An ultrathin insulating PSS shell is wrapped onto aMWCNTs@PANI, resulting in the improvement of dispersibility for aMWCNTs@PANI and the decrease of dielectric loss for composite films. When the content of aMWCNTs@PANI‐PSS is 5.0 wt %, the dielectric constant of aMWCNTs@PANI‐PSS/PVDF‐HFP reaches 430 (100 Hz), which is about 55 times of pure PVDF‐HFP and 1.7 times of aMWCNTs@PANI/PVDF‐HFP (247). Besides, the responding dielectric loss of aMWCNTs@PANI‐PSS/PVDF‐HFP composite film is only 0.67, much lower than that of aMWCNTs@PANI/PVDF‐HFP (25) and aMWCNTs/PVDF‐HFP (3185). © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 948–956     

Podand‐Based Dimeric Chromium(III)–Salen Complex for Asymmetric Henry Reaction: Cooperative Catalysis Promoted by Complexation of Alkali Metal Ions

A new kind of podand‐based dimeric salen ligand was synthesized, and its association with potassium cations was investigated by ¹H NMR spectroscopy. The corresponding Cr^III–salen dimer was assembled by a supramolecular host–guest self‐assembly process and was then used as a catalyst in highly efficient and enantioselective asymmetric Henry reactions. Regulation by KBAr_F (BAr_F=[3,5‐(CF₃)₂C₆H₃]₄B) led to remarkable improvements in yield (by up to 58 %) and enantioselectivity (for example, from 80 % ee to 96 % ee).     

Influences of organometallic polymer‐derived catalyst dispersion on SWNT growth

Catalyst formation kinetics of a ferrocene‐containing homopolymer, polyferrocenylethylmethylsilane (PFEMS), is investigated as it relates to the catalysis of single walled carbon nanotubes (SWNTs) through a chemical vapor deposition (CVD) process. The formation and efficiency of the PFEMS‐based iron catalyst is compared with that of the corresponding polystyrene (PS)‐b‐PFEMS diblock copolymer. The PFEMS homopolymer contains 23 wt % iron, while PS‐b‐PFEMS, with a 25 vol % PFEMS content, is only 6% iron. Despite its lower iron content, spin‐cast PS‐b‐PFEMS films on SiO₂/Si substrates produce more active iron sites than spin‐cast PFEMS films during CVD growth of SWNTs. This is related to the self‐assembly of the block copolymer, where PFEMS domains are well dispersed in the PS matrix, which degrades at a CVD temperature of 920 °C to leave catalytically active elemental iron behind. On the contrary, the pure PFEMS films contain a high percentage of iron and silicon, which tend to transform into ceramic‐coated iron at this high temperature, thus rendering the iron inactive towards SWNT growth. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 758–765, 2007     

Interfacial Self‐Assembly of Closely Packed Nanoparticle Arrays of Silica@Multiporphyrin Hybrids as Light‐Sensitizers for Dye Degradation and Viologen Photochromism

Light‐sensitizer functionalized organic–inorganic hybrid materials have attracted much attention owing to their potential applications in the fields of optoelectronics, heterogeneous catalysis, sensors, and nanotechnology. Here, an interfacial self‐assembly of zero‐dimensional (0D) silica@multiporphyrin array nanohybrids and their 3D Langmuir–Blodgett (LB) films is reported. Photoactive tetrapyridylporphyrin (TPyP) was first assembled on the silica nanoparticles’ surfaces via silane, substitution, and coordination reactions to produce nanoSiO₂@(Pd‐TPyP)_n hybrids. Then, the Cd²⁺‐nanoSiO₂@(Pd‐TPyP)_n monolayers and LB films were constructed on the CdCl₂ subphase surface. These monolayers and LB films displayed stronger stability, as well as more uniform and closely packed nanoparticle arrays compared with those prepared on the pure water surface, owing to the formation of strong network‐like Pd‐ and Cd‐TPyP coordination units, which significantly enhanced the nanoparticles’ interaction. Further, compared with that of the 0D nanoSiO₂@(Pd‐TPyP)_n hybrids, the degradation efficiency was nearly 20 times higher when the hybrids’ LB films were used as light‐sensitizers for the photocatalytic degradation of RhB. Finally, flexible photochromic devices were constructed by using the LB films sandwiched between two electrodes, which displayed a reversible photoinduced redox reaction of viologen together with a color change process. Because TPyP was strongly immobilized on the nanoparticles’ surfaces and the particles were connected through the Py‐Pd²⁺‐Py and Py‐Cd²⁺‐Py coordination units with the 3D network‐like architecture, the present nanohybrids and LB films had good stability and reusability.     

Super‐Elastic Air/Water Interfacial Films Self‐Assembled from Soluble Surfactants

We show that water‐soluble monosodic salts of F‐alkyl phosphates C_nF_2n+1(CH₂)₂OP(O)(OH)₂, with n=8 and 10 (F8H2Phos and F10H2Phos) form Gibbs films with exceptionally high dilational viscoelastic modules E that reach ～900 mN m^?1 in the condensed phases. These E values are up to one order of magnitude larger than those recorded for phospholipid, protein and polymer films commonly considered as highly viscoelastic. F8H2Phos.1Na undergoes a transition between a liquid‐expanded and a liquid‐condensed phase. In the case of F10H2Phos.1Na, a transition occurs between a gas phase of surface domains, in which the molecules are densely packed, and a liquid‐condensed phase.     

聚二烯丙基二甲基氯化铵在质子交换膜表面静电自组装过程的热力学研究

本文通过热化学方法设计了PDDA滴定质子交换膜,并研究了高分子的静电自组装过程。通过非线性拟合数据分析,求出了自组装过程的焓变（ ）和结合常数（K）。根据该反应过程中的热力学参数,可知自组装过程是“焓驱动”反应。热量的放出代表着能量的降低,有利于反应的发生;而自由度的减小不利于反应的发生。对于每个离子键的形成,单分子DDA的焓变超过了PDDA,这是因为小分子能够更加自由地结合到膜上,而高分子PDDA有一定的位阻效应。     

Vapor‐Surface Sol‐Gel Deposition of Titania Alternated with Protein Adsorption for Assembly of Electroactive,Enzyme‐Active Films

Combining vapor‐surface sol‐gel deposition of titania with alternate adsorption of oppositely charged iron heme proteins provided ultrathin {TiO₂/protein}_n films with reversible voltammetry extended to 15 TiO₂/protein bilayers, more than twice that of more conventional polyion‐protein or nanoparticle‐protein films made by alternate layer‐by‐layer adsorption. Catalytic activity toward O₂, H₂O₂, and NO was also improved significantly compared to the conventionally fabricated films. The method involves vaporization of titanium butoxide into thin films of water, forming porous TiO₂ sol‐gel layers. Myoglobin (Mb), hemoglobin (Hb), and horseradish peroxidase (HRP) were assembled by adsorption alternated with the vapor‐deposited TiO₂ layers. Improved electrochemical and catalytic performance may be related to better film permeability leading to better mass transport within the films, as suggested by studies with soluble voltammetric probes, scanning electron microscopy (SEM) and atomic force microscopy (AFM). The electrochemical and electrocatalytic activity of the films can be controlled by tailoring the amount of water with which the metal alkoxide precursor vapor reacts and the number of bilayers deposited in the assembly.