低温热处理制备介孔NiO、Co3O4及超电容性能研究

在不使用有机试剂的条件下, 通过简单的水热法制备了纳米结构的Ni(OH)2与Co(OH)2, 低温热处理得到NiO与Co3O4. 透射电子显微镜及N2等温吸附-脱附测试结果表明金属氧化物具有无序的介孔结构及高比表面积. 电化学测试结果表明介孔金属氧化物具有良好的超电容性能, 介孔NiO, Co3O4在5 mA放电电流下的比电容分别达176, 298 F•g－1.     

Synthesis of 2D/2D Structured Mesoporous Co3O4 Nanosheet/N‐Doped Reduced Graphene Oxide Composites as a Highly Stable Negative Electrode for Lithium Battery Applications

Mesoporous Co₃O₄ nanosheets (Co₃O₄‐NS) and nitrogen‐doped reduced graphene oxide (N‐rGO) are synthesized by a facile hydrothermal approach, and the N‐rGO/Co₃O₄‐NS composite is formulated through an infiltration procedure. Eventually, the obtained composites are subjected to various characterization techniques, such as XRD, Raman spectroscopy, surface area analysis, X‐ray photoelectron spectroscopy (XPS), and TEM. The lithium‐storage properties of N‐rGO/Co₃O₄‐NS composites are evaluated in a half‐cell assembly to ascertain their suitability as a negative electrode for lithium‐ion battery applications. The 2D/2D nanostructured mesoporous N‐rGO/Co₃O₄‐NS composite delivered a reversible capacity of about 1305 and 1501 mAh g^?1 at a current density of 80 mA g^?1 for the 1st and 50th cycles, respectively. Furthermore, excellent cyclability, rate capability, and capacity retention characteristics are noted for the N‐rGO/Co₃O₄‐NS composite. This improved performance is mainly related to the existence of mesoporosity and a sheet‐like 2D hierarchical morphology, which translates into extra space for lithium storage and a reduced electron pathway. Also, the presence of N‐rGO and carbon shells in Co₃O₄‐NS should not be excluded from such exceptional performance, which serves as a reliable conductive channel for electrons and act as synergistically to accommodate volume expansion upon redox reactions. Ex‐situ TEM, impedance spectroscopy, and XPS, are also conducted to corroborate the significance of the 2D morphology towards sustained lithium storage.     

皱褶表面介孔镍钴硫化物微球的制备及其超电性能

通过一步水热法分别合成了α-NiS、Co₃S₄和CoNi₂S₄纳米介孔电极材料,并研究了其电化学性能。 X射线衍射(XRD)、扫描电子显微镜(SEM)和透射电子显微镜(TEM)研究表明,介孔硫化物是由单相纳米颗粒堆叠组装而成,其中二元系的CoNi₂S₄由纳米片自组装形成了具有皱褶表面的微球形貌。 电化学性能研究表明,二元系的CoNi₂S₄比α-NiS、Co₃S₄具有更高的比电容、更佳的倍率特性和优异的循环稳定性。 在扫描速率为5 mV/s时,CoNi₂S₄材料在6 mol/L KOH电解液中比电容高达1678.3 F/g,优于α-NiS (787.4 F/g)和Co₃S₄(1532.7 F/g),在扫描速率从5 mV/s增加到100 mV/s时,其电容保持率为45.8%,比α-NiS(30.2%)和Co₃S₄(29.3%)高出约15%。 在15A/g的电流密度下,经过900次循环充-放电后,二元系的CoNi₂S₄的电容仍保持在96.3%,库伦效率保持在94.3%左右,说明镍钴双金属硫化物具有优异的循环稳定性能和充放电可逆性。     

When Mesoporous Silica Meets the Alkaline Polyelectrolyte: A Controllable Synthesis of Functional and Hollow Nanostructures with a Porous Shell

An efficient and environment friendly surface‐protected etching method by using mesoporous silica as a template and alkaline polyelectrolyte as both the protecting and etching agent was developed to prepare a SiO₂ nanotube with a porous shell. The polyelectrolytes attached to the template not only create a localized alkaline environment, but also effectively protect the silica surface, whereas the mesopore channels accelerate the diffusion of etchant throughout the template, all of which facilitate the formation of hollow structures in a fully controllable way. By tuning the etching power and protecting ability of the polyelectrolyte, the rigidity and porosity of products can be precisely manipulated. It is inspiring that various alkaline polyelectrolytes including polypeptide and dextran derivative can be used for the etching process, so that the porous and hollow nanostructures are born with positively charged and biocompatible surface as well as abundant amino groups for further coupling, which make them potential capsules for drug delivery and probes for imaging and detection. The protective etching process can also be extended to the preparation of yolk‐shell super structures with functional cores, or porous nanoparticle assemblies with their individual characteristics maintained.     

Synthesis of Superacid‐Functionalized Mesoporous Nanocages with Tunable Pore Diameters and Their Application in the Synthesis of Coumarins

Here we demonstrate for the first time the preparation of a triflic acid (TFA)‐functionalized mesoporous nanocage with tunable pore diameters by the wet impregnation method. The obtained materials have been unambiguously characterized by XRD, N₂ adsorption, FTIR spectroscopy, and NH₃ temperature‐programmed desorption (TPD). From the characterization results, it has been found that the TFA molecules are firmly anchored on the surface of the mesoporous supports without affecting their acidity. We also demonstrate the effect of the pore and cage diameter of the KIT‐5 supports on the loading of TFA molecules inside the pore channels. It has been found that the total acidity of the materials increases with an increase in the TFA loading on the support, whereas the acidity of the materials decreases with an increase in the pore diameter of the support. The acidity of the TFA‐functionalized mesoporous nanocages is much higher than that of the zeolites and metal‐substituted mesoporous acidic catalysts. The TFA‐functionalized materials have also been employed as the catalysts for the synthesis of 7‐hydroxy‐4‐methylcoumarin by means of the Pechmann reaction under solvent‐free conditions. It has been found that the catalytic activity of the TFA‐functionalized KIT‐5 is much higher than that of zeolites and metal‐substituted mesoporous catalytic materials in the synthesis of coumarin derivatives. The stability of the catalyst is extremely good and can be reused several times without much loss of activity in the above reaction.     

Highly Ordered Mesoporous Cobalt Oxide Nanostructures: Synthesis,Characterisation, Magnetic Properties,and Applications for Electrochemical Energy Devices

Highly ordered mesoporous Co₃O₄ nanostructures were prepared using KIT‐6 and SBA‐15 silica as hard templates. The structures were confirmed by small angle X‐ray diffraction, high resolution transmission electron microscopy, and N₂ adsorption–desorption isotherm analysis. Both KIT‐6 cubic and SBA‐15 hexagonal mesoporous Co₃O₄ samples exhibited a low Néel temperature and bulk antiferromagnetic coupling due to geometric confinement of antiferromagnetic order within the nanoparticles. Mesoporous Co₃O₄ electrode materials have demonstrated the high lithium storage capacity of more than 1200 mAh g^?1 with an excellent cycle life. They also exhibited a high specific capacitance of 370 F g^?1 as electrodes in supercapacitors.     

高功率超级电容器用介孔炭电极材料

以纳米CaCO3为模板、蔗糖为前躯体制备超级电容器用介孔炭电极材料.材料的结构由氮吸附、TEM表征,借助恒流充放电、循环伏安和交流阻抗评价了其在6 mol.L-1KOH电解液中的电化学电容性能.结果表明,蔗糖基介孔炭的比表面积606 m2/g,富含10~30 nm的介孔.恒流放电法测得介孔炭在电流密度50 mA/g下的比电容为125 F/g,大电流倍率性能特别突出.电流密度增大到20 000 mA/g,比电容还保持有88F/g,远高于进口电容炭,该介孔炭是一种很有前景的高功率超级电容器炭电极材料.     

Controllable Synthesis of Mesoporous Peapod‐like Co3O4@Carbon Nanotube Arrays for High‐Performance Lithium‐Ion Batteries

Transition metal oxides are regarded as promising anode materials for lithium‐ion batteries because of their high theoretical capacities compared with commercial graphite. Unfortunately, the implementation of such novel anodes is hampered by their large volume changes during the Li⁺ insertion and extraction process and their low electric conductivities. Herein, we report a specifically designed anode architecture to overcome such problems, that is, mesoporous peapod‐like Co₃O₄@carbon nanotube arrays, which are constructed through a controllable nanocasting process. Co₃O₄ nanoparticles are confined exclusively in the intratubular pores of the nanotube arrays. The pores between the nanotubes are open, and thus render the Co₃O₄ nanoparticles accessible for effective electrolyte diffusion. Moreover, the carbon nanotubes act as a conductive network. As a result, the peapod‐like Co₃O₄@carbon nanotube electrode shows a high specific capacity, excellent rate capacity, and very good cycling performance.     

Mesoporous Co3O4 Nanobundle Electrocatalysts

Tailoring metal oxide nanostructures with mesoporous architectures is vital to improve their electrocatalytic performance. Herein, we demonstrate the synthesis of 2D mesoporous Co₃O₄ (meso‐Co₃O₄) nanobundles with uniform shape and size by employing a hard‐template method. In this study, the incipient wetness impregnation technique has been chosen for loading metal precursor into the silica hard template (SBA‐15). The results reveal that the concentration of a saturated precursor solution plays a vital role in mesostructured ordering, as well as the size and shape of the final meso‐Co₃O₄ product. The optimized precursor concentration allows us to synthesize ordered meso‐Co₃O₄ with four to seven nanowires in each particle. The meso‐Co₃O₄ structure exhibits excellent electrocatalytic activity for both glucose and water oxidation reactions.     

Controllable Synthesis of Ultrathin Transition‐Metal Hydroxide Nanosheets and their Extended Composite Nanostructures for Enhanced Catalytic Activity in the Heck Reaction

We report an effective and universal approach for the preparation of ultrathin single‐ or multiple‐component transition‐metal hydroxide (TMH) nanosheets with thickness below 5 nm. The unique synthesis benefits from the gradual decomposition of the preformed metal–boron (M‐B, M=Fe, Co, Ni, NiCo) composite nanospheres which facilitates the formation of ultrathin nanosheets by the oxidation of the metal and the simultaneous release of boron species. The high specific surface area of the sheets associated with their ultrathin nature promises a wide range of applications. For example, we demonstrate the remarkable adsorption ability of Pb^II and As^V in waste water by the ultrathin FeOOH nanosheets. More interestingly, the process can be extended simply to the synthesis of composite structures of metal alloy hollow shells encapsulated by TMH nanosheets, which show excellent catalytic activity in the Heck reaction.     

Facile Microstructure Control of Mesoporous Co1.29Ni1.71O4 and the Effect of the Microstructure on Lithium‐Storage Performance

A simple and efficient pathway has been designed and developed to synthesize mesoporous Co_1.29Ni_1.71O₄ nanostructures without the use of any templates. By adjusting the volume ratio of water to ethanol, the Co_1.29Ni_1.71O₄ microstructure can be facilely controlled, and different nanostructures such as microflowers, nanorods, and nanoparticles were obtained. All three as‐synthesized samples have a mesoporous structure, but with different pore‐size distributions, in which the nanorod sample exhibits the highest capacity, good rate capability, and cycle stability as an anode material in lithium‐ion batteries (LIBs). The possible reason might be that the one‐dimensional structure of the nanorods accounts for their higher conductivity relative to microflowers and nanoparticles, and their high conductivity coupled with their mesoporous structure might contribute to their excellent electrochemical performance.     

Pure and Palladium‐Loaded Co3O4 Hollow Hierarchical Nanostructures with Giant and Ultraselective Chemiresistivity to Xylene and Toluene

Pure and palladium‐loaded Co₃O₄ hollow hierarchical nanostructures consisting of nanosheets have been prepared by solvothermal self‐assembly. The nanostructures exhibited an ultrahigh response and selectivity towards p‐xylene and toluene. The responses (resistance ratio) of the palladium‐loaded Co₃O₄ hollow hierarchical nanostructures to 5 ppm of p‐xylene and toluene were as high as 361 and 305, respectively, whereas the selectivity values (response ratios) towards p‐xylene and toluene over interference from ethanol were 18.1 and 16.1, respectively. We attributed the giant response and unprecedented high selectivity towards methylbenzenes to the abundant adsorption of oxygen by Co₃O₄, the high chemiresistive variation in the Co₃O₄ nanosheets (thickness≈11 nm), and the catalytic promotion of the specific gas‐sensing reaction. The morphological design of the p‐type Co₃O₄ nanostructures and loading of the palladium catalyst have paved a new way to monitoring the most representative indoor air pollutants in a highly selective, sensitive, and reliable manner.     

介孔NiO制备及其在超级电容器的应用

应用金属有机配合物作前驱体,煅烧制备有稳定结构的介孔NiO电极.TEM孔径分布及电化学测试表明,该电极结构规整,平均孔径为30 nm.在2.0 A·g-1电流密度下,比电容为72 F·g-1.1000次循环后,几乎无衰减,而且其表面介孔结构相当稳定.     

Self‐Template Synthesis of Hybrid Porous Co3O4–CeO2 Hollow Polyhedrons for High‐Performance Supercapacitors

In this work, hybrid porous Co₃O₄–CeO₂ hollow polyhedrons have been successfully obtained via a simple cation‐exchange route followed by heat treatment. In the synthesis process, ZIF‐67 polyhedron frameworks are firstly prepared, which not only serve as a host for the exchanged Ce3⁺ ions but also act as the template for the synthesis of hybrid porous Co₃O₄–CeO₂ hollow polyhedrons. When utilized as electrode materials for supercapacitors, the hybrid porous Co₃O₄–CeO₂ hollow polyhedrons delivered a large specific capacitance of 1288.3 F g^?1 at 2.5 A g^?1 and a remarkable long lifespan cycling stability (<3.3 % loss after 6000 cycles). Furthermore, an asymmetric supercapacitor (ASC) device based on hybrid porous Co₃O₄–CeO₂ hollow polyhedrons was assembled. The ASC device possesses an energy density of 54.9 W h kg^?1, which can be retained to 44.2 W h kg^?1 even at a power density of 5100 W kg^?1, indicating its promising application in electrochemical energy storage. More importantly, we believe that the present route is a simple and versatile strategy for the preparation of other hybrid metal oxides with desired structures, chemical compositions and applications.     

Highly Ordered Mesoporous Few‐Layer Graphene Frameworks Enabled by Fe3O4 Nanocrystal Superlattices

While great progress has been achieved in the synthesis of ordered mesoporous carbons in the past decade, it still remains a challenge to prepare highly graphitic frameworks with ordered mesoporosity and high surface area. Reported herein is a simple synthetic methodology, based on the conversion of self‐assembled superlattices of Fe₃O₄ nanocrystals, to fabricate highly ordered mesoporous graphene frameworks (MGFs) with ultrathin pore walls consisting of three to six stacking graphene layers. The MGFs possess face‐centered‐cubic symmetry with interconnected mesoporosity, tunable pore width, and high surface area. Because of their unique architectures and superior structural durability, the MGFs exhibit excellent cycling stability and rate performance when used as anode materials for lithium‐ion batteries, thus retaining a specific capacity of 520 mAh g^?1 at a current density of 300 mA g^?1 after 400 cycles.     

Mesoporous Nickel Oxide Nanowires: Hydrothermal Synthesis,Characterisation and Applications for Lithium‐Ion Batteries and Supercapacitors with Superior Performance

Mesoporous nickel oxide nanowires were synthesized by a hydrothermal reaction and subsequent annealing at 400 °C. The porous one‐dimensional nanostructures were analysed by field‐emission SEM, high‐resolution TEM and N₂ adsorption/desorption isotherm measurements. When applied as the anode material in lithium‐ion batteries, the as‐prepared mesoporous nickel oxide nanowires demonstrated outstanding electrochemical performance with high lithium storage capacity, satisfactory cyclability and an excellent rate capacity. They also exhibited a high specific capacitance of 348 F g^?1 as electrodes in supercapacitors.     

Polymeric Micelle Assembly for the Smart Synthesis of Mesoporous Platinum Nanospheres with Tunable Pore Sizes

A facile method for the fabrication of well‐dispersed mesoporous Pt nanospheres involves the use of a polymeric micelle assembly. A core–shell–corona type triblock copolymer [poly(styrene‐b‐2‐vinylpyridine‐b‐ethylene oxide), PS‐b‐P2VP‐b‐PEO] is employed as the pore‐directing agent. Negatively charged PtCl₄^2? ions preferably interact with the protonated P2VP⁺ blocks while the free PEO chains prevent the aggregation of the Pt nanospheres. The size of the mesopores can be finely tuned by varying the length of the PS chain. Furthermore, it is demonstrated that the metallic mesoporous nanospheres thus obtained are promising candidates for applications in electrochemistry.     

Porous Co3O4 Nanosheets with Extraordinarily High Discharge Capacity for Lithium Batteries

Cobalt and battery charge : Porous Co₃O₄ with a hexagonal sheetlike structure has been synthesized through precursor Co(OH)₂ hexagonal nanosheets (see figure). The as‐prepared nanosheets exhibit excellent Li‐battery performance with a good cycle life and high capacity (1450 mAh g^?1).

     

Scalable Synthesis of One-Dimensional Mesoporous ZnMnO3 Nanorods with Ultra-Stable and High Rate Capability for Efficient Lithium Storage

The cost-efficient ZnMnO₃ has attracted increasing attention as a prospective anode candidate for advanced lithium-ion batteries (LIBs) owing to its resourceful abundance, large lithium storage capacity and low operating voltage. However, its practical application is still seriously limited by the modest cycling and rate performances. Herein, a facile design to scalable synthesize unique one-dimensional (1D) mesoporous ZnMnO₃ nanorods (ZMO-NRs) composed of nanoscale particles (≈11 nm) is reported. The 1D mesoporous structure and nanoscale building blocks of the ZMO-NRs effectively promote the transport of ions/electrons, accommodate severe volume changes, and expose more active sites for lithium storage. Benefiting from these appealing structural merits, the obtained ZMO-NRs anode exhibits excellent rate behavior (≈454 mAh g⁻¹ at 2 A g⁻¹) and ultra-long term cyclic performance (≈949.7 mAh g⁻¹ even over 500 cycles at 0.5 A g⁻¹) for efficient lithium storage. Additionally, the LiNi_0.8Co_0.1Mn_0.1O₂//ZMO-NRs full cell presents a practical energy density (≈192.2 Wh kg⁻¹) and impressive cyclability with approximately 91 % capacity retention over 110 cycles. This highlights that the ZMO-NRs product is a highly promising high-rate and stable electrode candidate towards advanced LIBs in electronic devices and sustainable energy storage applications.     

Bi2O3 Hierarchical Nanostructures: Controllable Synthesis,Growth Mechanism,and their Application in Photocatalysis

Flower power : Unique 3D flower‐like Bi₂O₃ hierarchical nanostructures were synthesized using a mild aqueous template‐free method (see figure). By introducing VO₃^? into the reaction system, which mediated the nucleation and growth of Bi₂O₃, the in situ self‐assembly of 3D hierarchitectures from 2D nanosheets has been realized.