Catalytic Asymmetric Synthesis of 3‐(α‐Hydroxy‐β‐carbonyl) Oxindoles by a ScIII‐Catalyzed Direct Aldol‐Type Reaction

A direct catalytic asymmetric aldol‐type reaction of 3‐substituted‐2‐oxindoles with glyoxal derivatives and ethyl trifluoropyruvate, catalyzed by a chiral N,N′‐dioxide–Sc(OTf)₃ (Tf=trifluoromethanesulfonyl) complex, has been developed that tolerates a wide range of substrates. The reaction proceeds in good yields and excellent enantioselectivities (up to 93 % yield, 99:1 diastereomeric ratio (dr), and >99 % enantiomeric excess (ee)) under mild conditions, to deliver 3‐(α‐hydroxy‐β‐carbonyl) oxindoles with vicinal quaternary–tertiary or quaternary–quaternary stereocenters. Even with 1 mol % catalyst loading or on scaleup (10 mmol of starting material), maintenance of ee was observed, which showed the potential value of the catalyst system. In studies probing the reaction mechanism, a positive nonlinear effect was observed and Sc^III‐based enolate intermediates were detected by using ESIMS. On the basis of the experimental results and previous reports, a possible catalytic cycle was assumed.     

Catalytic Enantioselective Synthesis of C1‐ and C2‐Symmetric Spirobiindanones through Counterion‐Directed Enolate C‐Acylation

A catalytic enantioselective route to C₁‐ and C₂‐symmetric 2,2′‐spirobiindanones has been realized through an intramolecular enolate C‐acylation. This reaction employs a chiral ammonium counterion to direct the acylation of an in situ generated ketone enolate with a pentafluorophenyl ester. This reaction constitutes the first example of a direct catalytic enantioselective C‐acylation of a ketone and provides an efficient and highly enantioselective route to axially chiral spirobiindanediones. These products can be diastereoselectively derivatized, offering access to a range of functionalized spirocyclic architectures.     

Enantioselective Aldol Type Reactions of Acetate Titanium Enolate with α,β-Unsaturated Aldehyde-TiCl4 Complex

The camphor-derived N-acetyloxazolidinethione has been used to effect enantioselective aldol type reaction of the derived thioimide titanium enolate with unsaturated aldehyde-TiCl₄ complex. The observed facial selectivity is best explained by an open transition state model.     

TiO2‐Nanoparticles Catalyzed Synthesis of New Trifluoromethyl‐4,5‐dihydro‐1,2,4‐oxadiazoles and Trifluoromethyl‐1,2,4‐oxadiazoles

Synthesis of a new series of trifluoromethyl‐4,5‐dihydro‐1,2,4‐oxadiazoles and trifluoromethyl‐1,2,4‐oxadiazoles have been described by utilizing the reactions between amidoximes and trifluoroacetimidoyl chlorides. Trifluoromethyl‐4,5‐dihydro‐1,2,4‐oxadiazoles have been synthesized under mild conditions such as Na₂CO₃, THF‐H₂O, and titanium dioxide nanoparticles as catalyst in good to excellent yields. Also, trifluoromethyl‐1,2,4‐oxadiazoles have been synthesized directly from reaction of amidoximes and trifluoroacetimidoyl chlorides in a one‐pot manner in present of NaH, THF, and titanium dioxide nanoparticle as catalyst.     

Pd‐Catalyzed Carbonylative α‐Arylation of Aryl Bromides: Scope and Mechanistic Studies

Reaction conditions for the three‐component synthesis of aryl 1,3‐diketones are reported applying the palladium‐catalyzed carbonylative α‐arylation of ketones with aryl bromides. The optimal conditions were found by using a catalytic system derived from [Pd(dba)₂] (dba=dibenzylideneacetone) as the palladium source and 1,3‐bis(diphenylphosphino)propane (DPPP) as the bidentate ligand. These transformations were run in the two‐chamber reactor, COware, applying only 1.5 equivalents of carbon monoxide generated from the CO‐releasing compound, 9‐methylfluorene‐9‐carbonyl chloride (COgen). The methodology proved adaptable to a wide variety of aryl and heteroaryl bromides leading to a diverse range of aryl 1,3‐diketones. A mechanistic investigation of this transformation relying on ³¹P and ¹³C NMR spectroscopy was undertaken to determine the possible catalytic pathway. Our results revealed that the combination of [Pd(dba)₂] and DPPP was only reactive towards 4‐bromoanisole in the presence of the sodium enolate of propiophenone suggesting that a [Pd(dppp)(enolate)] anion was initially generated before the oxidative‐addition step. Subsequent CO insertion into an [Pd(Ar)(dppp)(enolate)] species provided the 1,3‐diketone. These results indicate that a catalytic cycle, different from the classical carbonylation mechanism proposed by Heck, is operating. To investigate the effect of the dba ligand, the Pd⁰ precursor, [Pd(η³‐1‐PhC₃H₄)(η⁵‐C₅H₅)], was examined. In the presence of DPPP, and in contrast to [Pd(dba)₂], its oxidative addition with 4‐bromoanisole occurred smoothly providing the [PdBr(Ar)(dppp)] complex. After treatment with CO, the acyl complex [Pd(CO)Br(Ar)(dppp)] was generated, however, its treatment with the sodium enolate led exclusively to the acylated enol in high yield. Nevertheless, the carbonylative α‐arylation of 4‐bromoanisole with either catalytic or stoichiometric [Pd(η³‐1‐PhC₃H₄)(η⁵‐C₅H₅)] over a short reaction time, led to the 1,3‐diketone product. Because none of the acylated enol was detected, this implied that a similar mechanistic pathway is operating as that observed for the same transformation with [Pd(dba)₂] as the Pd source.     

Formation of α‐SF5‐Enolate Enables Preparation of 3‐SF5‐Quinolin‐2‐ones, 3‐SF5‐Quinolines,and 3‐SF5‐Pyridin‐2‐ones: Evaluation of their Physicochemical Properties

This study describes, for the first time, the generation of a SF₅‐substituted ester enolate from benzyl SF₅‐acetate under soft enolization conditions, which in turn participates in aldol addition reactions in high yield. The reaction was applied in the synthesis of 3‐SF₅‐quinolin‐2‐ones, 3‐SF₅‐quinolines, and 3‐SF₅‐pyridin‐2‐ones, none of which have previously been reported. To provide guidelines for their use in drug discovery, the physicochemical properties of these building blocks were determined and compared with those of their CF₃‐ and t‐Bu‐analogues.     

Formation of α‐SF5‐Enolate Enables Preparation of 3‐SF5‐Quinolin‐2‐ones, 3‐SF5‐Quinolines,and 3‐SF5‐Pyridin‐2‐ones: Evaluation of their Physicochemical Properties

This study describes, for the first time, the generation of a SF₅‐substituted ester enolate from benzyl SF₅‐acetate under soft enolization conditions, which in turn participates in aldol addition reactions in high yield. The reaction was applied in the synthesis of 3‐SF₅‐quinolin‐2‐ones, 3‐SF₅‐quinolines, and 3‐SF₅‐pyridin‐2‐ones, none of which have previously been reported. To provide guidelines for their use in drug discovery, the physicochemical properties of these building blocks were determined and compared with those of their CF₃‐ and t‐Bu‐analogues.     

Direct Catalytic Asymmetric Mannich‐Type Reaction of α‐N3 Amide

An α‐N₃ 7‐azaindoline amide serves as a latent enolate to directly engage in an asymmetric Mannich‐type reaction with N‐thiophosphinoyl imines by the action of a cooperative catalyst. The thus‐obtained highly enantioenriched anti‐adduct was transformed into β‐amino‐α‐azido acid in high yield by simple acidic treatment.     

Total Synthesis of the Tetracyclic Antimalarial Alkaloid (±)‐Myrioneurinol

The first total synthesis of the tetracyclic antimalarial Myrioneuron alkaloid (±)‐myrioneurinol has been accomplished using three highly diastereoselective reactions as pivotal steps: 1) an intramolecular Michael addition of a benzyloxycarbonyl‐protected lactam titanium enolate to an α,β‐unsaturated ester for construction of the spirocyclic C5 quaternary center and the a/d rings, 2) a malonate anion conjugate addition to a transient nitrosoalkene to install the requisite functionality and configuration at the C7 position, and 3) an intramolecular sulfonyliminium aza‐Sakurai reaction to form the b ring and the attendant C9/C10 configuration of the natural product.     

Transition‐Metal‐Free Formal Decarboxylative Coupling of α‐Oxocarboxylates with α‐Bromoketones under Neutral Conditions: A Simple Access to 1,3‐Diketones

A transition‐metal‐free formal decarboxylative coupling reaction between α‐oxocarboxylates and α‐bromoketones to synthesize 1,3‐diketone derivatives is presented. In this reaction, a broad scope of substrates can be employed, and neither a metal‐based reagent nor an additional base is required. DFT calculations reveal that this reaction proceeds through a coupling followed by decarboxylation mechanism and the α‐bromoketone unprecedentedly serves as a nucleophile under neutral conditions. The rate‐determining step is an unusual hydrogen‐bond‐assisted enolate formation by thermolysis.     

Highly Enantioselective Protonation of the 3,4‐Dihydro‐2‐ methylnaphthalen‐1(2H)‐one Li‐Enolate by TADDOLs

A series of nine TADDOLs (=α,α,α′,α′‐tetraaryl‐1,3‐dioxolane‐4,5‐dimethanols) 1a – 1i , have been tested as proton sources for the enantioselective protonation of the Li‐enolate of 2‐methyl‐1‐tetralone (=3,4‐dihydro‐2‐methylnaphthalen‐1(2H)‐one). The enolate was generated directly from the ketone (with LiN(i‐Pr)₂ (LDA)/MeLi) or from the enol acetate (with 2 MeLi) or from the silyl enol ether (with MeLi) in CH₂Cl₂ or Et₂O as the solvent (Scheme). The Li‐enolate (associated with LiBr/LDA, or LiBr alone) was combined with 1.5 – 3.0 equiv. of the TADDOL at −78° by addition of the latter or by inverse addition. 2‐Methyl‐1‐tetralone of (S)‐configuration is formed (≤80% yield) with up to 99.5% selectivity if and only if (R,R)‐TADDOLs ( 1d , e , g ) with naphthalen‐1‐yl groups on the diarylmethanol unit are employed (Table). The reactions were carried out on the 0.1‐ to 1.0‐mM scale. The selectivity is subject to non‐linear effects (NLE) when an enantiomerically enriched TADDOL 1d is used (Fig. 1). The performance of TADDOLs bearing naphthalen‐1‐yl groups is discussed in terms of their peculiar structures (Fig. 2).     

An Imidazoline–Aminophenol (IAP) Nickel Catalyst: Structure and Catalytic Activity in the Enantioselective 1,4‐Addition of 3′‐Indolyl‐3‐Oxindoles to Nitroethylene

The structure of a nickel complex of imidazoline–aminophenol (IAP) prepared from IAP with Ni(OAc)₂ was elucidated as cis‐bis(imidazolineaminophenoxide) [Ni(IAP)₂]. The [Ni(IAP)₂] complex smoothly promoted catalytic asymmetric 1,4‐addition of 3′‐indolyl‐3‐oxindole to nitroethylene to provide chiral mixed 3,3′‐bisindoles with high enantioselectivities. Mechanistic studies using ESI‐MS analyses suggest that one IAP ligand dissociated from [Ni(IAP)₂] to generate the Ni–enolate of 3′‐indolyl‐3‐oxindole. From the optically active 3,3′‐mixed indole adduct, biologically important 3′‐indolyl‐3‐pyrrolidinoindoline was successfully synthesized in a three‐step reaction sequence.     

Computational SN2‐Type Mechanism for the Difluoromethylation of Lithium Enolate with Fluoroform through Bimetallic C−F Bond Dual Activation

The reaction mechanism for difluoromethylation of lithium enolates with fluoroform was analyzed computationally (DFT calculations with the artificial force induced reaction (AFIR) method and solvation model based on density (SMD) solvation model (THF)), showing an S_N2‐type carbon–carbon bond formation; the “bimetallic” lithium enolate and lithium trifluoromethyl carbenoid exert the C?F bond “dual” activation, in contrast to the monometallic butterfly‐shaped carbenoid in the Simmons–Smith reaction. Lithium enolates, generated by the reaction of 2 equiv. of lithium hexamethyldisilazide (rather than 1 or 3 equiv.) with the cheap difluoromethylating species fluoroform, are the most useful alkali metal intermediates for the synthesis of pharmaceutically important α‐difluoromethylated carbonyl products.     

An Alternative to the Classical α‐Arylation: The Transfer of an Intact 2‐Iodoaryl from ArI(O2CCF3)2

The α‐arylation of carbonyl compounds is generally accomplished under basic conditions, both under metal catalysis and via aryl transfer from the diaryl λ³‐iodanes. Here, we describe an alternative metal‐free α‐arylation using ArI(O₂CCF₃)₂ as the source of a 2‐iodoaryl group. The reaction is applicable to activated ketones, such as α‐cyanoketones, and works with substituted aryliodanes. This formal C? H functionalization reaction is thought to proceed through a [3,3] rearrangement of an iodonium enolate. The final α‐(2‐iodoaryl)ketones are versatile synthetic building blocks.     

Oxidation and β‐Alkylation of Alcohols Catalysed by Iridium(I) Complexes with Functionalised N‐Heterocyclic Carbene Ligands

The borrowing hydrogen methodology allows for the use of alcohols as alkylating agents for C?C bond forming processes offering significant environmental benefits over traditional approaches. Iridium(I)‐cyclooctadiene complexes having a NHC ligand with a O‐ or N‐functionalised wingtip efficiently catalysed the oxidation and β‐alkylation of secondary alcohols with primary alcohols in the presence of a base. The cationic complex [Ir(NCCH₃)(cod)(MeIm(2‐ methoxybenzyl))][BF₄] (cod=1,5‐cyclooctadiene, MeIm=1‐methylimidazolyl) having a rigid O‐functionalised wingtip, shows the best catalyst performance in the dehydrogenation of benzyl alcohol in acetone, with an initial turnover frequency (TOF₀) of 1283 h^?1, and also in the β‐alkylation of 2‐propanol with butan‐1‐ol, which gives a conversion of 94 % in 10 h with a selectivity of 99 % for heptan‐2‐ol. We have investigated the full reaction mechanism including the dehydrogenation, the cross‐aldol condensation and the hydrogenation step by DFT calculations. Interestingly, these studies revealed the participation of the iridium catalyst in the key step leading to the formation of the new C?C bond that involves the reaction of an O‐bound enolate generated in the basic medium with the electrophilic aldehyde.     

Kinetics and mechanism of the oxidation of some α‐hydroxy acids by 2,2′‐bipyridinium chlorochromate

The oxidation of glycolic, lactic, malic, and a few substituted mandelic acids by 2,2′‐bipyridinium chlorochromate (BPCC) in dimethylsulphoxide leads to the formation of corresponding oxoacids. The reaction is first order each in BPCC and the hydroxy acids. The reaction is catalyzed by the hydrogen ions. The hydrogen ion dependence has the form: k_obs = a + b [H⁺]. The oxidation of α‐deuteriomandelic acid exhibited a substantial primary kinetic isotope effect (k_H/k_d = 5.29 at 303 K). Oxidation of p‐methylmandelic acid was studied in 19 different organic solvents. The solvent effect has been analyzed by using Kamlet's and Swain's multiparametric equations. A mechanism involving a hydride ion transfer via a chromate ester is proposed. © 2002 Wiley Periodicals, Inc. Int J Chem Kinet 34: 248–254, 2002     

Enolate Stabilization by Anion–π Interactions: Deuterium Exchange in Malonate Dilactones on π‐Acidic Surfaces

Of central importance in chemistry and biology, enolate chemistry is an attractive topic to elaborate on possible contributions of anion–π interactions to catalysis. To demonstrate the existence of such contributions, experimental evidence for the stabilization of not only anions but also anionic intermediates and transition states on π‐acidic aromatic surfaces is decisive. To tackle this challenge for enolate chemistry with maximal precision and minimal uncertainty, malonate dilactones are covalently positioned on the π‐acidic surface of naphthalenediimides (NDIs). Their presence is directly visible in the upfield shifts of the α‐protons in the ¹H NMR spectra. The reactivity of these protons on π‐acidic surfaces is measured by hydrogen–deuterium (H–D) exchange for 11 different examples, excluding controls. The velocity of H–D exchange increases with π acidity (NDI core substituents: SO₂R>SOR>H>OR>OR/NR₂>SR>NR₂). The H–D exchange kinetics vary with the structure of the enolate (malonates>methylmalonates, dilactones>dithiolactones). Moreover, they depend on the distance to the π surface (bridge length: 11–13 atoms). Most importantly, H–D exchange depends strongly on the chirality of the π surface (chiral sulfoxides as core substituents; the crystal structure of the enantiopure (R,R,P)‐macrocycle is reported). For maximal π acidity, transition‐state stabilizations up to ?18.8 kJ mol^?1 are obtained for H–D exchange. The Brønsted acidity of the enols increases strongly with π acidity of the aromatic surface, the lowest measured pK_a=10.9 calculates to a ΔpK_a=?5.5. Corresponding to the deprotonation of arginine residues in neutral water, considered as “impossible” in biology, the found enolate–π interactions are very important. The strong dependence of enolate stabilization on the unprecedented seven‐component π‐acidity gradient over almost 1 eV demonstrates quantitatively that such important anion–π activities can be expected only from strong enough π acids.     

Study of the oxidation of some catechols in the presence of 4‐amino‐3‐thio‐1,2,4‐triazole by digital simulation of cyclic voltammograms

Electrochemical oxidation of catechol and its derivatives ( 1a–d ) has been studied in the presence of 4‐amino‐3‐thio‐1,2,4‐triazole ( 3 ) at various pHs. Some electrochemical techniques such as cyclic voltammetry using the diagnostic criteria derived by Nicholson and Shain for various electrode mechanisms and controlled‐potential coulometry were used. Results indicate the participation of catechols ( 1a–d ) with 3 in an intramolecular cyclization reaction to form the corresponding 1,2,4‐triazino[5,4‐b]‐1,3,4‐thiadiazine derivatives. In various scan rates, based on an electron transfer–chemical reaction–electron transfer–chemical reaction mechanism, the observed homogeneous rate constants (k_obs) for Michael addition reaction were estimated by comparing the experimental cyclic voltammetric responses with the digital simulated results. The oxidation reaction mechanism of catechols ( 1a–d ) in the presence of 4‐amino‐3‐thio‐1,2,4‐triazole ( 3 ) was also studied. © 2007 Wiley Periodicals, Inc. Int J Chem Kinet 39: 340–345, 2007     

Gold‐Catalyzed Formal C−C Bond Insertion Reaction of 2‐Aryl‐2‐diazoesters with 1,3‐Diketones

The transition‐metal‐catalyzed formal C−C bond insertion reaction of diazo compounds with monocarbonyl compounds is well established, but the related reaction of 1,3‐diketones instead gives C−H bond insertion products. Herein, we report a protocol for a gold‐catalyzed formal C−C bond insertion reaction of 2‐aryl‐2‐diazoesters with 1,3‐diketones, which provides efficient access to polycarbonyl compounds with an all‐carbon quaternary center. The aryl ester moiety plays a crucial role in the unusual chemoselectivity, and the addition of a Brønsted acid to the reaction mixture improves the yield of the C−C bond insertion product. A reaction mechanism involving cyclopropanation of a gold carbenoid with an enolate and ring‐opening of the resulting donor–acceptor‐type cyclopropane intermediate is proposed. This mechanism differs from that of the traditional Lewis‐acid‐catalyzed C−C bond insertion reaction of diazo compounds with monocarbonyl compounds, which involves a rearrangement of a zwitterion intermediate as a key step.     

Kinetics and Mechanism of Oxidation of 1‐Methoxy‐2‐propanol and 1‐Ethoxy‐2‐propanol by Ditelluratocuprate(III) in Alkaline Medium

The kinetics of oxidation of 1‐methoxy‐2‐propanol and 1‐ethoxy‐2‐propanol by ditelluratocuprate(III) (DTC) in alkaline liquids has been studied spectrophotometrically in the temperature range of 293.2–313.2 K. The reaction rate showed first order dependence in DTC and fractional order with respect to 1‐methoxy‐2‐propanol or 1‐ethoxy‐2‐propanol. It was found that the pseudo‐first order rate constant k_obs increased with an increase in concentration of OH^? and a decrease in concentration of TeO₄^2?. There is a negative salt effect. A plausible mechanism involving a pre‐equilibrium of a adduct formation between the complex and 1‐methoxy‐2‐propanol or 1‐ethoxy‐2‐propanol was proposed. The rate equations derived from mechanism can explain all experimental observations. The activation parameters along with the rate constants of the rate‐determining step were calculated.