Abrasive Stripping Voltammetric Studies of Lignin and Lignin Model Compounds

Lignin is potentially a major renewable, nonfossil source of aromatic and cyclohexyl compounds. In this study, we have investigated the abrasive stripping voltammetry of lignin and four lignin model compounds in the room temperature ionic liquids (RTILs) [C₄mim][NTf₂], [N_6,2,2,2][NTf₂] and [C₄mim][OTf] (where [C₄mim]⁺=1‐butyl‐3‐methylimidazolium, [N_6,2,2,2]⁺=n‐hexyltriethylammonium, [NTf₂]^?=bis(trifluoromethanesulfonyl)imide and [OTf]^? =trifluoromethanesulfonate) on a gold macrodisk and in 0.1 M H₂SO₄ and 0.1 M NaOH on a boron‐doped diamond (BDD) macroelectrode, with the hope of using the voltammetry to fingerprint the functional groups within the lignin molecule. The use of RTILs on metal electrodes, or either acidic or basic media in combination with BDD electrodes allows solvent systems with wide electrochemical potential windows, useful for studying voltammetry which may be difficult to observe in systems where early breakdown of the solvent occurs.     

Synthesis,Stabilization, Functionalization and,DFT Calculations of Gold Nanoparticles in Fluorous Phases (PTFE and Ionic Liquids)

Gold nanoparticles (Au‐NPs) were reproducibly obtained by thermal, photolytic, or microwave‐assisted decomposition/reduction under argon from Au(CO)Cl or KAuCl₄ in the presence of n‐butylimidazol dispersed in the ionic liquids (ILs) BMIm⁺BF₄^?, BMIm⁺OTf^?, or BtMA⁺NTf₂^? (BMIm⁺=n‐butylmethylimidazolium, BtMA⁺=n‐butyltrimethylammonium, OTf^?=^?O₃SCF₃, NTf₂^?=^?N(O₂SCF₃)₂). The ultra small and uniform nanoparticles of about 1–2 nm diameter were produced in BMIm⁺BF₄^? and increased in size with the molecular volume of the ionic liquid anion used in BMIm⁺OTf^? and BtMA⁺NTf₂^?. Under argon the Au‐NP/IL dispersion is stable without any additional stabilizers or capping molecules. From the ionic liquids, the gold nanoparticles can be functionalized with organic thiol ligands, transferred, and stabilized in different polar and nonpolar organic solvents. Au‐NPs can also be brought onto and stabilized by interaction with a polytetrafluoroethylene (PTFE, Teflon) surface. Density functional theory (DFT) calculations favor interactions between IL anions instead of IL cations. This suggests a Au???F interaction and anionic Au_n stabilization in fluorine‐containing ILs. The ¹⁹F NMR signal in BMIm⁺BF₄^? shows a small Au‐NP concentration‐dependent shift. Characterization of the dispersed and deposited gold nanoparticles was done by transmission electron microscopy (TEM/HRTEM), transmission electron diffraction (TED), dynamic light scattering (DLS), UV/Vis absorbance spectroscopy, scanning electron microscopy (SEM), electron spin resonance (ESR), and electron probe micro analyses (EPM, SEM/EDX).     

Reference Electrode for Ionic Liquids

Reference electrodes for room temperature ionic liquid (RTIL) applications were constructed that have a known and reproducible potential versus the ferrocene/ferrocenium couple. They are based on reference electrodes of the first kind, Ag/Ag⁺ couple type, or of the second kind, based on Ag/AgCl in M⁺Cl^?. The former uses AgNO₃ salt and the latter tetrabutylammonium chloride, Bu₄NCl, dissolved in acetonitrile which are then introduced to the ionic liquid of choice for a final concentration of 0.1 M. The reference electrodes can be easily and reproducibly constructed. An ionic contact of these reference systems with the test electrolyte was made using an asbestos fiber liquid junction. The internal compartment of the reference system was filled with the same ionic liquid as used for the electrochemical experiment. The performance of these reference electrodes was tested in selected ionic liquids using the ferrocene/ferrocenium redox couple. The stability, reproducibility, and temperature behavior of the two reference systems have been characterized in the following ionic liquids: 1‐butyl‐3‐methylimidazolium tetrafluoroborate (BMIBF₄), 1‐butyl‐3‐methylimidazolium bis(trifluoromethanesulfonyl)imide (BMI(CF₃SO₂)₂N), and 1‐butyl‐3‐methylimidazolium hexafluorophosphate (BMIPF₆). It has been found that the formal potentials of the examined reference systems are stable over several days. There is a linear relationship for the temperature studied in the range from 25 to 60 °C.     

Supramolecular Ionic‐Liquid Gels with High Ionic Conductivity

Supramolecular ionogels were prepared by the gelation of room‐temperature ionic liquid 1‐butyl‐3‐methylimidazolium tetrafluoroborate ([BMIm][BF₄]) with (S,S)‐bis(leucinol)oxalamide. Remarkably, the ionic conductivity of solutions and ionogels with low gelator concentrations is higher than that of neat [BMIm][BF₄]. On the basis of molecular dynamics simulations and quantum mechanical calculations, the origin of this phenomenon is attributed to the higher affinity of gelator molecules towards [BF₄]^? ions, which reduces the electrostatic attraction between [BMIm]⁺ and [BF₄]^? and thus increases their mobility. With increasing gelator concentration, the ionic conductivity decreases due to the formation of a denser gelator matrix, which hinders the pathways for ionic transport. However, even for very dense ionogels, this decrease is less than one order of magnitude relative to neat [BMIm][BF₄], and thus they can be classified as highly conductive materials with strong potential for application as functional electrolytes.     

Synthesis of poly(glycolic acid) in ionic liquids

The synthesis of poly(glycolic acid) (PGA) by polyesterification of glycolic acid was studied using ionic liquids, mainly 1,3‐dialkylimidazolium salts, as reaction media. The ¹H NMR spectra of PGA oligomers were assigned and end‐group signals were used to follow the reaction. Low PGA yields were obtained by the direct polyesterification of glycolic acid at 200–240 °C, because of monomer evaporation during the reaction. On the other hand, PGAs of DP _n up to 45 were obtained by the postpolycondensation of a preformed oligomer in 1‐butyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)amide (BMIm⁺Tf₂N^?). The precipitation of PGA in reaction medium at long reaction times limited the achievable molar mass. Rate constants were determined for catalyzed and noncatalyzed reactions, assuming a second‐order reaction mechanism. The efficiency of esterification catalysts such as Zn(OAc)₂ was low in these media, as only about twofold increases in reaction rate were observed. This was assigned to the preferential interaction of Zn²⁺ with ionic liquid anion instead of the polymer carboxylic acid end‐groups. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3025–3035, 2006     

Electrogenerated Chemiluminescence Sensor Based on Tris(2,2′‐bipyridine)ruthenium(II)‐Immobilized Natural Clay and Ionic Liquid

A novel electrogenerated chemiluminescence (ECL) sensor based on natural clay and ionic liquid was fabricated. Tris(2,2′‐bipyridine)ruthenium(II) (Ru(bpy)₃²⁺) was immobilized on natural clay surface through simple adsorption. An ECL sensor was prepared by mixing Ru(bpy)₃²⁺‐incorporated clay, graphite powder and an ionic liquid (1‐butyl‐3‐methylimidazolium hexafluorophosphate) as the binder. The electrochemical behavior and ECL of the immobilized Ru(bpy)₃²⁺ was investigated. It was observed that the ECL of immobilized Ru(bpy)₃²⁺ was activated by the ionic liquid. The proposed ECL sensor showed high sensitivity to tri‐n‐propylamine (TPrA) and the detection limit was found to be 20 pM. In addition, the ECL sensor displayed good stability for TPrA detection and long‐term storage stability.     

Synthesis of Pyrazolo[3,4‐d]pyrimidin‐4‐ones Catalyzed by Br?nsted‐acidic Ionic Liquids as Highly Efficient and Reusable Catalysts

A convenient and efficient method for the synthesis of pyrazolo[3,4‐d]pyrimidin‐4‐ones via heterocyclization reaction of 5‐amino‐1H‐pyrazole‐4‐carboxamides with triethyl orthoesters using two Br?nsted‐acidic ionic liquids, 3‐methyl‐1‐(4‐sulfonic acid)butylimidazolium hydrogen sulfate [MIM⁺(CH₂)₄SO₃H][HSO₄^?] or N‐(4‐sulfonic acid)butyl triethylammonium hydrogen sulfate [Et₃N⁺(CH₂)₄SO₃H][HSO₄^?], as efficient homogeneous catalysts under solvent‐free conditions is described.     

Electrochemical Ammonia Gas Sensing in Nonaqueous Systems: A Comparison of Propylene Carbonate with Room Temperature Ionic Liquids

First, the direct and indirect electrochemical oxidation of ammonia has been studied by cyclic voltammetry at glassy carbon electrodes in propylene carbonate. In the case of the indirect oxidation of ammonia, its analytical utility of indirect for ammonia sensing was examined in the range from 10 and 100 ppm by measuring the peak current of new wave resulting from reaction between ammonia and hydroquinone, as function of ammonia concentration, giving a sensitivity 1.29×10^?7 A ppm^?1 (r²=0.999) and limit‐of‐detection 5 ppm ammonia. Further, the direct oxidation of ammonia has been investigated in several room temperature ionic liquids (RTILs), namely 1‐butyl‐3‐methylimidazolium tetrafluoroborate ([C₄mim] [BF₄]), 1‐butyl‐3‐methylimidazolium trifluoromethylsulfonate ([C₄mim] [OTf]), 1‐Ethyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide ([C₂mim] [NTf₂]), 1‐butyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide ([C₄mim] [NTf₂]) and 1‐butyl‐3‐methylimidazolium hexafluorophosphate ([C₄mim] [PF₆]) on a 10 μm diameter Pt microdisk electrode. In four of the RTILs studied, the cyclic voltammetric analysis suggests that ammonia is initially oxidized to nitrogen, N₂, and protons, which are transferred to an ammonia molecule, forming NH via the protonation of the anion(s) (A^?). However, in [C₄mim] [PF₆], the protonated anion was formed first, followed by NH . In all five RTILs, both HA and NH are reduced at the electrode surface, forming hydrogen gas, which is then oxidized. The analytical ability of this work has also been explored further, giving a limit‐of‐detection close to 50 ppm in [C₂mim] [NTf₂], [C₄mim] [OTf], [C₄mim] [BF₄], with a sensitivity of ca. 6×10^?7 A ppm^?1 (r²=0.999) for all three ionic liquids, showing that the limit of detection was ca. ten times larger than that in propylene carbonate since ammonia in propylene carbonate might be more soluble in comparison with RTILs when considering the higher viscosity of RTILs.     

Temperature Effects on the Capacitance of an Imidazolium‐based Ionic Liquid on a Graphite Electrode: A Molecular Dynamics Simulation

Temperature‐dependent electric double layer (EDL) and differential capacitance–potential (C_d–U) curves of the ionic liquid 1‐butyl‐3‐methylimidazolium hexafluorophosphate (BMIM⁺/PF₆^?) were studied on a graphite electrode by molecular dynamics simulations. It was found that all C_d–U curves were asymmetric camel‐shaped with higher C_d at negative polarization, attributed to the specific adsorption of BMIM⁺. In addition, the maxima of C_d at the negative polarization decrease monotonically with temperature due to the thicker EDL, whereas at the positive polarization they gradually increase from 450 to 550 K and decrease at 600 K. Such temperature effects at positive polarization may be understood in terms of the competition between two aspects: the weakening specific adsorption of BMIM⁺ allows more effective screening to the positive charge and overall increasing EDL thickness. Although the former dominates from 450 to 550 K, the latter becomes dominant at 600 K.     

Effect of Ionic Liquid Anion Type in the Performance of Solid Polymer Electrolytes Based on Poly(Vinylidene fluoride‐trifluoroethylene)

The effect of different anions within the ionic liquid in the characteristics of solid polymer electrolytes (SPEs) based on P(VDF‐TrFE) has been investigated. 1‐ethyl‐3‐methylimidazolium acetate, [C₂mim][OAc], 1‐ethyl‐3‐methylimidazolium triflate, [C₂mim][(CF₃SO₃)], 1‐ethyl‐3‐methylimidazolium lactate, [C₂mim][Lactate], 1‐ethyl‐3‐methylimidazolium thiocyanate, [C₂mim][SNC] and 1‐ethyl‐3‐methylimidazolium hydrogen sulfate [C₂mim][HSO₄] have been used in SPE prepared by solvent casting. The polymer phase, thermal and electrochemical properties of the SPE have been determined. The thermal and electrical properties of the SPEs strongly depend on the selected IL, as determined by their different interactions with the polymer matrix. The room temperature ionic conductivity increases in the following way for the different anions: [SNC]>[CF₃SO₃)]>[HSO₄]>[Lactate]>[OAc], which is mainly dependent on the viscosity of the ionic liquid.     

Hydrolysis and chemical speciation of (C2H5)2Sn2+, (C2H5)3Sn+ and (C3H7)3Sn+ in aqueous media simulating the major composition of natural waters

The hydrolysis of (C₂H₅)₂Sn²⁺, (C₂H₅)₃Sn⁺ and (n‐C₃H₇)₃Sn⁺ has been studied, by potentiometric measurements ([H⁺]‐glass electrode), in NaNO₃, NaCl, NaCl/Na₂SO₄ mixtures and in a synthetic seawater (SSWE), as an ionic medium simulating the major composition of natural seawater, at different ionic strengths (0 ≤ I ≤ 5 mol dm^?3) and salinities (15 ≤ S ≤ 45), and at t = 25 °C. Five hydrolytic species for (C₂H₅)₂Sn²⁺, three for (C₂H₅)₃Sn⁺ and two for (C₃H₇)₃Sn⁺ are found. Interactions with the anion components of SSWE, considered as single‐salt seawater, are determined by means of a complex formation model. A predictive equation for the calculation of unknown hydrolysis constants of trialkyltin(IV) cations, such as tributyltin(IV), in NaNO₃, NaCl, and SSWE media at different ionic strengths is proposed. Equilibrium constants obtained are also used to determine the interaction parameters of Pitzer equations. Copyright © 2001 John Wiley & Sons, Ltd.     

DFT Study of the Geometrical and Electronic Structures of Geminal Dicationic Ionic Liquids 1,3‐Bis[3‐methylimidazolium‐1‐yl]hexane Halides

In this work, the geometrical and electronic properties of the mono cationic ionic liquid 1‐hexyl‐3‐methylimidazolium halides ([C₆(mim)]⁺_X^?, X=Cl, Br and I) and dicationic ionic liquid 1,3‐bis[3‐methylimidazolium‐1‐yl]hexane halides ([C₆(mim)₂X₂], X=Cl, Br and I) were studied using the density functional theory (DFT). The most stable conformer of these two types ionic liquids (IL) are determined and compared with each other. Results show that in the most stable conformers, in both monocationic ILs and dicationic ILs, the Cl^? and Br^? anions prefer to locate almost in the plane of the imidazolium ring whereas the I^? anion prefers nearly vertical location respect to the imidazolium ring plan. Comparison of hydrogen bonding and ionic interactions in these two types of ionic liquids reveals that these ionic liquids can be formed hydrogen bond by Cl^? and Br^? anion. The calculated thermodynamic functions show that the interaction of cation — anion pair in the dicationic ionic liquids are more than monocationic ionic liquids and these interactions decrease with increasing the halide anion atomic weight.     

离子液体[C2mim][GaCl4]的溶解热研究

在干燥氩气氛下, 用等摩尔的高纯无水GaCl3和[C2mim][Cl](氯化1-甲基-3-乙基咪唑)直接搅拌混合, 制备了淡黄色透明的的离子液体[C2mim][GaCl4] (1-ethyl-3-methylimidazolium chlorogallate) . 在298.15 K下, 利用具有恒温环境的溶解反应热量计, 测定了这种离子液体的不同浓度摩尔溶解焓 . 针对[C2mim][GaCl4]溶解于水后即分解的特点, 在Pitzer电解质溶液理论基础上, 提出了确定这种离子液体标准摩尔溶解焓的新方法, 得到了[C2mim][GaCl4]在水中的标准摩尔溶解焓, ＝－132 kJ•mol－1, 以及Pitzer焓参数组合: ＝－0.1373076和 ＝0.3484209. 借助热力学循环和Glasser离子液体晶格能理论, 用Ga3＋, Cl－和[C2mim]—的离子水化焓数据以及本文得到的[C2mim][GaCl4]标准摩尔溶解焓, 估算了配离子4Cl－(g)解离成Ga3＋(g)和4Cl－(g)的解离焓ΔHdis([GaCl4]-)≈5855 kJ•mol－1. 这个结果揭示了离子液体[C2mim][GaCl4]的标准摩尔溶解焓绝对值并不很大的原因, 即是很大的离子水化焓被很大的[GaCl4]－(g)的解离焓相互抵消了.     

Three‐dimensional networks in 5‐methylimidazolium 3‐carboxy‐4‐hydroxybenzenesulfonate and bis(5‐methylimidazolium) 3‐carboxylato‐4‐hydroxybenzenesulfonate

The two title proton‐transfer compounds, 5‐methylimidazolium 3‐carboxy‐4‐hydroxybenzenesulfonate, C₄H₇N₂⁺·C₇H₅O₆S⁻, (I), and bis(5‐methylimidazolium) 3‐carboxylato‐4‐hydroxybenzenesulfonate, 2C₄H₇N₂⁺·C₇H₅O₆S²⁻, (II), are each organized into a three‐dimensional network by a combination of X—H...O (X = O, N or C) hydrogen bonds, and π–π and C—H...π interactions.     

Inclusion of HNEt3+ in an acyclic tetraphenolate

The acyclic tetraphenolic derivative 2,2′‐methyl­ene­bis[6‐(3‐tert‐butyl‐2‐hydroxy‐5‐methyl­benzyl)‐4‐methyl­phenol] reacts with excess triethyl­amine in aceto­nitrile to form a molecular complex, i.e. triethyl­ammonium 2‐(3‐tert‐butyl‐2‐hydroxy‐5‐methylbenzyl)‐6‐[3‐(3‐tert‐butyl‐2‐hydroxy‐5‐methylbenzyl)‐2‐hydroxy‐5‐methylbenzyl]‐4‐methylphenolate aceto­nitrile sol­vate, C₆H₁₆N⁺·­C₃₉H₄₇O₄^?·­C₂H₃N, where the organic HNEt₃⁺ cation is included in the partial cone defined by the aromatic faces of the acyclic poly­phenolate.     

Molecularly imprinted SPE coupled with HPLC for the selective separation and enrichment of alkyl imidazolium ionic liquids in environmental water samples

A novel 1‐butyl‐3‐methylimidazolium chloride ionic liquid surface imprinted solid‐phase sorbent was synthesized. The as‐prepared material was characterized by SEM, Brunauer–Emmett–Teller surface area analysis and Fourier Transform IR measurements. Then its adsorption properties for alkyl imidazolium ionic liquids, including adsorption capacities, adsorption kinetics, and properties of selective separation and enrichment were studied in detail. It was shown that the ionic liquid surface imprinted polymer exhibited high selective recognition characteristics for the imidazolium chloride ionic liquids with short alkyl chains (C_nmimCl, n = 2, 4, 6, 8) and the adsorption equilibrium was achieved within 25 min. Various parameters were optimized for the 1‐butyl‐3‐methylimidazolium chloride ionic liquid surface imprinted polymer SPE column, such as flow rate, eluent solvent, selectivity, and reusability of the column. Then, the SPE column coupled with HPLC was used for the determination of alkyl imidazolium ionic liquids. Experimental results showed that the existence of their structural analogs and common concomitants in environmental matrices did not affect the enrichment of 1‐butyl‐3‐methyl imidazolium chloride ionic liquid. The average recoveries of 1‐butyl‐3‐methylimidazolium chloride ionic liquid in spiked water samples were in the range of 92.0–102.0% with the RSD lower than 5.8%.     

Investigation of ionic liquids under Bi‐ion and Bi‐cluster ions bombardment by ToF‐SIMS

A systematic study of five different imidazolium‐based room temperature ionic liquids, 1‐butyl‐3‐methylimidazolium acetate, 1‐butyl‐3‐methylimidazolium nitrate, 1‐butyl‐3‐methylimidazolium iodide, 1‐butyl‐3‐methylimidazolium hexafluorophosphate and 1‐butyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide were carried out by means of time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) in positive and negative ion mode. The compounds were measured under Bi‐ion and Bi‐cluster ions (Bi_2–7⁺, Bi_{3, 5}²⁺) bombardment, and spectral information and general rules for the fragmentation pattern are presented. Evidence for hydrogen bonding, due to high molecular secondary cluster ions, could be found. Hydrogen bonding strength could be estimated by ToF‐SIMS via correlation of the anionic yield enhancement with solvent parameters. Copyright © 2010 John Wiley & Sons, Ltd.     

Temperature Dependence of Interactions Between Stable Piperidine‐1‐yloxyl Derivatives and a Semicrystalline Ionic Liquid

The stable 2,2,6,6‐tetramethylpiperidine‐1‐yloxyl and its derivatives with hydrogen‐bond‐forming (‐OH, ‐OSO₃H), anionic (‐OSO₃^? bearing K⁺ or [K(18‐crown‐6)]⁺ as counter ion), or cationic (‐N⁺(CH₃)₃ bearing I^?, BF₄^?, PF₆^? or N^?(SO₂CF₃)₂ as counter ion) substituents are investigated in 1‐butyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide over a wide temperature range. The temperature dependence of the viscosity of the ionic liquid is well described by the Vogel–Fulcher–Tammann equation. Interestingly, the temperature dependence of the rotational correlation time of the spin probes substituted with either a hydrogen‐bond‐forming group or an ionic substituent can be described using the Stokes–Einstein equation. In contrast, the temperature dependence of the rotational correlation time of the spin probe without an additional substituent at the 4‐position to the nitroxyl group does not follow this trend. The activation energy for the mobility of the unsubstituted spin probe, determined from an Arrhenius plot of the spin‐probe mobility in the ionic liquid above the melting temperature, is comparable with the activation energy for the viscous flow of the ionic liquid, but is higher for spin probes bearing an additional substituent at the 4‐position. Quantum chemical calculations of the spin probes using the 6‐31G+d method give information about the rotational volume of the spin probes and the spin density at the nitrogen atom of the radical structure as a function of the substituent at the spin probes in the presence and absence of a counter ion. The results of these calculations help in understanding the effect of the additional substituent on the experimentally determined isotropic hyperfine coupling constant.     

Remarkable Electrochemical Responses of Ferrocene/NaY Zeolite Composite modified Electrode Based on Hydrophobic Ionic Liquid

The ferrocene/NaY zeolite composites (Fc/NaY) are introduced on the surface of a glassy carbon electrode together with the hydrophobic ionic liquid 1‐butyl‐3‐methylimidazolium hexafluorophosphate (BMIMPF₆). The modified electrode thus constructed exhibits a pair of reversible redox peaks corresponding to ferrocene. Additionally the peak separation remains almost constant (58–75 mV) and the value of the ratio i_pa/i_pc is close to 1 for scan rates in the range from 10 to 1000 mV s^?1. The effects of the scan rate, aqueous supporting electrolytes, hydrophobic ionic liquid and the contents of ferrocene encapsulated by electrochemistry are investigated. The extrazeolite electron transfer process is discussed. Furthermore, the Fc/NaY/IL‐modified electrode shows good mediation towards oxidation of ascorbic acid, dopamine, hydroquinone, and catechol.     

Gas‐phase dissociation of ionic liquid aggregates studied by electrospray ionisation mass spectrometry and energy‐variable collision induced dissociation

Positive singly charged ionic liquid aggregates [(C_nmim)_m+1(BF₄)_m]⁺ (mim = 3‐methylimidazolium; n = 2, 4, 8 and 10) and [(C₄mim)_m+1(A)_m]⁺ (A = Cl⁻, BF₄⁻, PF₆⁻, CF₃SO₃⁻ and (CF₃SO₂)₂N⁻) were investigated by electrospray ionisation mass spectrometry and energy‐variable collision induced dissociation. The electrospray ionisation mass spectra (ESI‐MS) showed the formation of an aggregate with extra stability for m = 4 for all the ionic liquids with the exception of [C₄mim][CF₃SO₃]. ESI‐MS‐MS and breakdown curves of aggregate ions showed that their dissociation occurred by loss of neutral species ([C_nmim][A])_a with a ≥ 1. Variable‐energy collision induced dissociation of each aggregate from m = 1 to m = 8 for all the ionic liquids studied enabled the determination of E_{cm, 1/2} values, whose variation with m showed that the monomers were always kinetically much more stable than the larger aggregates, independently of the nature of cation and anion. The centre‐of‐mass energy values correlate well with literature data on ionic volumes and interaction and hydrogen bond energies. Copyright © 2008 John Wiley & Sons, Ltd.