Catalytic C?C,C?N,and C?O Ullmann‐Type Coupling Reactions

Copper‐catalyzed Ullmann condensations are key reactions for the formation of carbon–heteroatom and carbon–carbon bonds in organic synthesis. These reactions can lead to structural moieties that are prevalent in building blocks of active molecules in the life sciences and in many material precursors. An increasing number of publications have appeared concerning Ullmann‐type intermolecular reactions for the coupling of aryl and vinyl halides with N, O, and C nucleophiles, and this Minireview highlights recent and major developments in this topic since 2004.     

Nitrene Insertion into C?C and C?H Bonds of Diamide Diimine Ligands Ligated to Chromium and Iron

The impact of redox non‐innocence (RNI) on chemical reactivity is a forefront theme in coordination chemistry. A diamide diimine ligand, [{‐CHN(1,2‐C₆H₄)NH(2,6‐iPr₂C₆H₃)}₂]ⁿ (n=0 to −4), (dadi)ⁿ, chelates Cr and Fe to give [(dadi)M] ([ 1 Cr(thf)] and [ 1 Fe]). Calculations show [ 1 Cr(thf)] (and [ 1 Cr]) to have a d⁴ Cr configuration antiferromagnetically coupled to (dadi)²⁻*, and [ 1 Fe] to be S=2. Treatment with RN₃ provides products where RN is formally inserted into the C C bond of the diimine or into a C H bond of the diimine. Calculations on the process support a mechanism in which a transient imide (imidyl) aziridinates the diimine, which subsequently ring opens.     

Amide‐Directed Tandem C?C/C?N Bond Formation through C?H Activation

The transformation of C? H bonds into other chemical bonds is of great significance in synthetic chemistry. C? H bond‐activation processes provide a straightforward and atom‐economic strategy for the construction of complex structures; as such, they have attracted widespread interest over the past decade. As a prevalent directing group in the field of C? H activation, the amide group not only offers excellent regiodirecting ability, but is also a potential C? N bond precursor. As a consequence, a variety of nitrogen‐containing heterocycles have been obtained by using these reactions. This Focus Review addresses the recent research into the amide‐directed tandem C? C/C? N bond‐formation process through C? H activation. The large body of research in this field over the past three years has established it as one of the most‐important topics in organic chemistry.     

Oxindole Synthesis by Direct Coupling of C?H and C?H Centers

An sp ² /sp ³ get‐together : A novel and efficient method can be used to synthesize 3,3‐disubstitued oxindoles by the direct intramolecular oxidative coupling of an aryl C? H and a C? H center (see scheme; DMF=N,N‐dimethylformamide).

     

Nickel‐Catalyzed Enantioselective C?C Bond Formation through C?O Cleavage in Aryl Esters

We report the first enantioselective C C bond formation through C O bond cleavage using aryl ester counterparts. This method is characterized by its wide substrate scope and results in the formation of quaternary stereogenic centers with high yields and asymmetric induction.     

Bifunctional transition metal‐based molecular catalysts for asymmetric C?C and C?N bond formation

This paper describes the recent advances in the conceptually new bifunctional Ir and Ru catalysts for asymmetric catalytic reactions. These reactions include the enantioselective Michael addition of 1,3‐dicarbonyl compounds to cyclic enones and nitroalkenes, and the enantioselective direct amination of α‐cyanoacetates with diazoesters. The outcome of these reactions in terms of reactivity and selectivity was delicately influenced by the catalyst structures and the reaction conditions including the solvents used. Even with a 1 : 1 molar ratio of donors to acceptors, the reactions proceeded smoothly to give the corresponding chiral adducts with an excellent yield and enantiomeric excess (ee). Preliminary mechanistic studies showed that the key stage of the catalytic cycle is the interaction of the bifunctional catalyst with a pronucleophilic reagent that leads to stereoselective formation of C‐, O‐, or N‐bound complexes. The resulting protonated catalyst bearing metal‐bound nucleophiles readily reacts with electrophiles to provide C? C and C? N bond formation products in a highly stereoselective manner. © 2009 The Japan Chemical Journal Forum and Wiley Periodicals, Inc. Chem Rec 9: 106–123; 2009: Published online in Wiley InterScience ( www.interscience.wiley.com ) DOI 10.1002/tcr.20172     

Magnetic Anisotropy of the C?C Single Bond

Anisotropic effects are broadly used in NMR spectroscopy for structure elucidation. With the development of computational methods it has become possible to quantify the effects and obtain further insight into their origin. Some classical interpretations have been questioned. Herein, we show that the classical “anisotropy cone” representing the anisotropic effect of the C? C single bond should be revised: deshielding at its side and shielding along its end are observed. Consequently, methyl, methylene, and methyne hydrogen atoms are not deshielded by C? C bonds as is conventionally explained in NMR spectroscopy textbooks. They are just less shielded than by the C? H bonds attached at the same carbon. In addition, this anisotropic effect is dependent on the environment and care should be taken when drawing conclusions based on it. For example, it differs for the staggered and eclipsed conformations of ethane in HCCH planes, as well as for cyclohexane. In fact, it is not the anisotropy of the C2? C3/C5? C6 bonds that determines the chemical shift difference of axial and equatorial protons of a rigid cyclohexane ring, but magnetic contributions from all bonds.     

Iron‐Mediated Cleavage of C?C Bonds in Vicinal Tricarbonyl Compounds in Water

Three of a kind : Vicinal tricarbonyl compounds undergo C? C cleavage mediated by ferric ions (see scheme). The observed cleavage of ninhydrin and dehydroascorbic acid has relevance for amino acid detection and the metabolism of vitamin C.

     

Iron‐Mediated Cleavage of C?C Bonds in Vicinal Tricarbonyl Compounds in Water

Drei von einer Sorte : Vicinale Tricarbonyl‐Verbindungen gehen Eisen(III)‐vermittelte C‐C‐Spaltungen ein (siehe Schema). Die Ergebnisse sind relevant für den Aminosäurenachweis durch Ninhydrin und für den Vitamin‐C‐Stoffwechsel.

     

Catalytic Methylation of C?H Bonds Using CO2 and H2

Formation of C C bonds from CO₂ is a much sought after reaction in organic synthesis. To date, other than C H carboxylations using stoichiometric amounts of metals, base, or organometallic reagents, little is known about C C bond formation. In fact, to the best of our knowledge no catalytic methylation of C H bonds using CO₂ and H₂ has been reported. Described herein is the combination of CO₂ and H₂ for efficient methylation of carbon nucleophiles such as indoles, pyrroles, and electron‐rich arenes. Comparison experiments which employ paraformaldehyde show similar reactivity for the CO₂/H₂ system.     

M4(CH2)4 Cubane‐Type Rare‐Earth Methylidene Complexes: Unique Reactivity toward Unsaturated C?O,C?N,and C?S Bonds

The reactivity of the cubane‐type rare‐earth methylidene complex [Cp′Lu(μ₃‐CH₂)]₄ ( 1 , Cp′=C₅Me₄SiMe₃) with various unsaturated electrophiles was investigated. The reaction of 1 with CO (1 atm) at room temperature gave the bis(ketene dianion)/dimethylidene complex [Cp′₄Lu₄(μ₃‐CH₂)₂(μ₃,η²‐O‐C?CH₂)₂] ( 2 ) in 86 % yield through the insertion of two molecules of CO into two of the four lutetium–methylidene units. In the reaction with the sterically demanding N,N‐diisopropylcarbodiimide at 60 °C, only one of the four methylidene units in 1 reacted with one molecule of the carbodiimide substrate to give the mono(ethylene diamido)/trimethylidene complex [Cp′₄Lu₄(μ₃‐CH₂)₃{iPrNC(=CH₂)NiPr}] ( 3 ) in 83 % yield. Similarly, the reaction of 1 with phenyl isothiocyanate gave the ethylene amido thiolate/trimethylidene complex [Cp′₄Lu₄(μ₃‐CH₂)₃{PhNC(S)=CH₂}] ( 4 ). In the case of phenyl isocyanate, two of the four methylidene units in 1 reacted with four molecules of the substrate at ambient temperature to give the malonodiimidate/dimethylidene complex [Cp′₄Lu₄(μ₃‐CH₂)₂{PhN=C(O)CH₂(O)C?NPh}₂] ( 5 ) in 87 % yield. In this reaction, each of the two lutetium–methylidene bonds per methylidene unit inserted one molecule of phenyl isocyanate. All the products have been fully characterized by NMR spectroscopy, X‐ray diffraction, and microelemental analyses.